Search NASA⌕ Search

SEARCH · Search NASA

Results for “sea surface salinity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

New Seawater Dielectric Constant Parametrization and Application to SMOS Retrieved Salinity

The accuracy of the Sea Surface Salinity (SSS) retrieved from L-Band radiometer measurements is strongly dependent on the reliability of the dielectric constant model. Two new parametrizations were recently developed based on one hand on the Soil Moisture and Ocean Salinity (SMOS) satellite multi-angular brightness temperature measurements by Boutin et al. (2021) (BV), and on the other hand, on new George Washington University laboratory measurements by Zhou et al. (2021) (GW2020). These two approaches are fully independent. For most SSS and Sea Surface Temperature (SST) conditions commonly observed over the open ocean, the relative variations of brightness temperatures Tb simulated through the BV and GW2020 parametrizations agree particularly well, and better than with earlier parametrizations previously used in the SMOS, Soil Moisture Active Passive (SMAP) and Aquarius SSS retrievals. Nevertheless, uncertainty remains, especially below 10 °C where a ∼ 0.1 K relative difference between the two models is observed. This motivates the development of a revised parameterization, BVZ, based on a methodology similar to that used to derive BV but using GW2020 instead of SMOS measurements. Compared to the GW2020 parameterization, BVZ is derived with a reduced number of degrees of freedom, it relies on the TEOS10 PSS78 conductivity-salinity relationship, and on the previously derived static permittivity of fresh water. One month per season of SMOS data have been reprocessed in 2018 using BV, GW2020, and BVZ. We find the best overall agreement between SMOS SSS and Argo SSS with BVZ parametrization, with noticeable improvement in the 5 °C–15 °C SST range.

sea measurements↗
NASA NTRS2001

Surface Salinity Variability in the North Atlantic During Recent Decades

The sea surface salinity (SSS) variability in the North Atlantic is investigated using numerical model simulations for the last 50 years based on atmospheric forcing variability from Comprehensive Atmosphere Ocean Data Set (COADS) and National Center for Environmental Prediction / National Center for Atmospheric Research (NCEP/NCAR) Reanalysis. The largest interannual and longer term variability occurs in two regions: the Labrador Sea and the North Equatorial Countercurrent (NECC) region. In both regions the seasonality of the surface salinity variability is prominent with the maximum standard deviation occurring in the summer/fall period. In the Labrador Sea the summer SSS anomalies far exceed those of wintertime in amplitude. The interannual SSS variability in the subpolar gyre can be attributed to two factors: excess ice melt and heat flux (i.e. deep mixing) variations. On the other hand, heat flux variability can also lead to meridional overturning changes on decadal time scales such that weak overturning is manifested in fresh surface conditions in the subpolar gyre. The overturning changes also influence the NECC region SSS variability. Moreover, the subpolar freshening events are expected to occur during the negative phase of North Atlantic Oscillation which is associated with a weak wintertime surface heat loss in the subpolar gyre. No excess sea ice melt or precipitation is necessary for the formation of the fresh anomalies, because with the lack of wide-spread deep mixing, the fresh water that would be expected based on climatology, would accumulate at the surface. Thus, the fresh water 'conveyor' in the Atlantic operates via the overturning circulation such that deep mixing inserts fresh water while removing heat from the water column.

Haekkinen, Sirpa↗
NASA NTRS2011

Remote Sensing of Salinity: The Dielectric Constant of Sea Water

Global monitoring of sea surface salinity from space requires an accurate model for the dielectric constant of sea water as a function of salinity and temperature to characterize the emissivity of the surface. Measurements are being made at 1.413 GHz, the center frequency of the Aquarius radiometers, using a resonant cavity and the perturbation method. The cavity is operated in a transmission mode and immersed in a liquid bath to control temperature. Multiple measurements are made at each temperature and salinity. Error budgets indicate a relative accuracy for both real and imaginary parts of the dielectric constant of about 1%.

LeVine, David M.↗
NASA NTRS2005

The Impact of the Sun on Passive Remote Sensing at L-band

The sun is a strong source of radiation at L-band behaving roughly like a thermal source with a temperature ranging between 10(exp 5) - 10(exp 7) K, depending on solar activity. This is an important consideration at 1.4 GHz (the window set aside for passive use only) where future satellite sensors will operate to monitor soil moisture and sea surface salinity (e.g. SMOS, Aquarius, and Hydros). Straight forward calculations show that such a source of radiation can be a significant issue for these remote sensing applications, especially in the case of remote sensing of sea surface salinity. Radiation from the sun impacts passive remote sensing systems in several ways. First, is the solar radiation that comes directly from the sun (line-of-sight from sun to spacecraft that enters the radiometer through antenna side lobes). This is a particular problem for sensors in sunsynchronous orbits near the terminator (e.g. orbits with equatorial crossing times near 6am/6pm) because the spacecraft is in the sun most of the time. Second, is solar radiation that is reflected (specularly) from the mean surface to the radiometer. This contribution can be nearly as large as the direct ray, especially when the reflection is from the ocean surface which has a high reflection coefficient. Finally, there is "incoherent" signal reflected from the surface structure (roughness) to the radiometer antenna. Examples illustrating the significance of these terms is presented for the case of a pushbroom radiometer such as Aquarius and a conically scanning radiometer such as proposed for Hydros. Calculations are made using a set of theoretical patterns for these beams together with data on solar radiation obtained from by a worldwide network of observing stations known as Radio Solar Telescope Network (RSTN). Near solar minimum, solar contamination is not a problem unless the sun enters near the main beam. But near solar maximum, account must be made for radiation from the sun even when the signal enters in sidelobes far from the main beam.

LeVine, David M.↗
NASA NTRS2000

Galactic Noise and Passive Microwave Remote Sensing from Space at L-Band

The spectral window at L-band (1.4 GHz) is important for passive remote sensing of parameters such as soil moisture and ocean salinity best measured at long wavelengths. At L-band, radiation from extraterrestrial (galactic) sources is strong enough to warrant inclusion in calibration and retrieval algorithms and unlike the constant cosmic background is spatially variable. Previous estimates of the magnitude and distribution of this background radiation have been rather coarse, However, recent surveys of the radio sky at 1.4 GHz have made it possible to produce maps with sufficient spatial and radiometric accuracy to be relevant to remote sensing applications. This is of particular concern for remote sensing of sea surface salinity because the surface (water) is a good reflector and the salinity signal is relatively small. This paper presents a modem map of the radiometric sky at L-band and a solution to the problem of determining the portion of the sky seen by a radiometer in orbit. The data is derived from recent radio astronomy surveys and is presented as equivalent brightness temperature suitable for remote sensing applications. Examples using orbits and antennas representative of those contemplated for remote sensing of soil moisture and sea surface salinity from space are presented to illustrate the signal levels to be expected. Radiation near the galactic plane can exceed several kelvin.

LeVine, D. M.↗
NASA NTRS1984

Errors in radiometric remote sensing of sea-surface temperature and salinity

Techniques for remote measurement of sea-surface physical temperature and salinity using radiometric measurements from aircraft or satellite are reviewed. Studies have been conducted to determine the sensitivity of the errors in surface temperature and salinity to errors in the measured brightness temperatures using combinations of UHF, L, S, and C-band measurements. These investigations were made using values of conductivity, static dielectric constant, and relaxation time derived from the regression equations of Klein and Swift (1977). Results of the error sensitivity study are presented in the form of error contour plots which permit the calculation of errors in the estimation of the physical parameters for given errors in the raw radiometric measurements.

Britt, C. L., Jr.↗
NASA NTRS2012

Ocean Surface Emissivity at L-band (1.4 GHz): The Dependence on Salinity and Roughness

A characterization of the emissivity of sea water at L-band is important for the remote sensing of sea surface salinity. Measurements of salinity are currently being made in the radio astronomy band at 1.413 GHz by ESA's Soil Moisture and Ocean Salinity (SMOS) mission and NASA's Aquarius instrument aboard the Aquarius/SAC-D observatory. The goal of both missions is accuracy on the order of 0.1 psu. This requires accurate knowledge of the dielectric constant of sea water as a function of salinity and temperature and also the effect of waves (roughness). The former determines the emissivity of an ideal (i.e. flat) surface and the later is the major source of error from predictions based on a flat surface. These two aspects of the problem of characterizing the emissivity are being addressed in the context of the Aquarius mission. First, laboratory measurements are being made of the dielectric constant of sea water. This is being done at the George Washington University using a resonant cavity. In this technique, sea water of known salinity and temperature is fed into the cavity along its axis through a narrow tube. The sea water changes the resonant frequency and Q of the cavity which, if the sample is small enough, can be related to the dielectric constant of the sample. An extensive set of measurements have been conducted at 1.413 GHz to develop a model for the real and imaginary part of the dielectric constant as a function of salinity and temperature. The results are compared to the predictions of models based on parameterization of the Debye resonance of the water molecule. The models and measurements are close; however, the differences are significant for remote sensing of salinity. This is especially true at low temperatures where the sensitivity to salinity is lowest.

LeVine, D. M.↗
NASA NTRS2021

Seawater Debye Model Function at L-Band and Its Impact on Salinity Retrieval From Aquarius Satellite Data

A model function of seawater, which specifies the dielectric constant of seawater as a function of salinity, temperature, and frequency, is important for the retrieval of sea surface salinity using satellite data. In 2017, a model function has been developed based on measurement data at 1.4134 GHz using a third-order polynomial expression in salinity ( S ) and temperature ( T ). Although the model showed improvements in salinity retrieval, it had an inconsistent behavior between partitioned salinities. To improve the stability of the model, new dielectric measurements of seawater have been made recently over a broad range of salinities and temperatures to expand the data set used for developing the model function. The structure of the model function has been changed from a polynomial expansion in S and T to a physics-based model consisting of a Debye molecular resonance term plus a conductivity term. Each unknown parameter is expressed in S and T based on the expanded measurement data set. Physical arguments have been used to limit the number of unknown coefficients in these expressions to improve the stability of the model function. The new model function has been employed in the retrieval algorithm of the Aquarius satellite mission to obtain a global salinity map. The retrieved salinity using a different model function is compared with in situ data collected by Argo floats to evaluate the impact and the performance of model functions. The results indicate that the new model function has significant improvements in salinity retrieval compared with other existing models.

Seawater↗
NASA NTRS2002

Sensitivity of Global Sea-Air CO2 Flux to Gas Transfer Algorithms, Climatological Wind Speeds, and Variability of Sea Surface Temperature and Salinity

Sensitivity analyses of sea-air CO2 flux to gas transfer algorithms, climatological wind speeds, sea surface temperatures (SST) and salinity (SSS) were conducted for the global oceans and selected regional domains. Large uncertainties in the global sea-air flux estimates are identified due to different gas transfer algorithms, global climatological wind speeds, and seasonal SST and SSS data. The global sea-air flux ranges from -0.57 to -2.27 Gt/yr, depending on the combination of gas transfer algorithms and global climatological wind speeds used. Different combinations of SST and SSS global fields resulted in changes as large as 35% on the oceans global sea-air flux. An error as small as plus or minus 0.2 in SSS translates into a plus or minus 43% deviation on the mean global CO2 flux. This result emphasizes the need for highly accurate satellite SSS observations for the development of remote sensing sea-air flux algorithms.

McClain, Charles R.↗
NASA NTRS1991

A model of the formation of high-salinity shelf water on polar continental shelves

This study presents a model of the flow and salinity fields forced by sea-surface salinity flux and wind stress curl and examines the processes that create High-Salinity Shelf Water (HSSW). To investigate the relative effects of wind stress and buoyancy forcing in HSSW production, the polynya freezing rate in the model is varied from 0.0 to 0.30 m/d, and the Ekman pumping derived from the wind stress curl is varied independently from 0.0 to 1.8 x 10 exp 6 m/s. The Ekman pumping was found to control the magnitude of the circulation, while the polynya freezing rate controlled the extent of salinization in the shelf water. The flux of HSSW increases linearly with increasing Ekman pumping above 0.3 x 10 exp -6 m/s. The modeled flux of HSSW and the flux of derived Botttom Water for the present estimates of the forcings (a peak freezing rate of 0.10 m/d and Ekman pumping of 0.2 x 10 exp -6 m/s) agree with the fluxes inferred from physical and chemical observations in the deep Weddel Sea by oceanographic field programs.

Grumbine, Robert W.↗
NASA NTRS2008

The Detection and Mitigation of RFI with the Aquarius L-Band Scatterometer

The Aquarius sea-surface salinity mission includes an L-band scatterometer to sense sea-surface roughness. This radar is subject to radio-frequency interference (RFI) in its passband from 1258 to 1262 MHz, a region also allocated for terrestrial radio location. Due to its received power sensitivity requirements, the expected RFI environment poses significant challenges. We present the results of a study evaluating the severity of terrestrial RFI sources on the operation of the Aquarius scatterometer, and propose a scheme to both detect and remove problematic RFI signals in the ocean backscatter measurements. The detection scheme utilizes the digital sampling of the ambient input power to detect outliers from the receiver noise floor which are statistically significant, and flags nearby radar echoes as potentially contaminated by RFI. This detection strategy, developed to meet tight budget and data downlink requirements, has been implemented and tested in hardware, and shows great promise for the detection and global mapping of L-band RFI sources.

Electromagnetic radiative interference↗
NASA NTRS2022

Measurement of SST and SSS Using Frequencies in the Range 0.3–2.0 GHz

Wide bandwidth radiometer systems that make measurements at multiple frequencies in the range from 300 MHz to 2 GHz have been proposed to address parameters important for understanding issues in the cryosphere associated with climate change such as ice sheet thickness and temperature. It is also possible with such a system to retrieve sea surface salinity (SSS), which is important for understanding the impact of climate change on ocean circulation at high latitude. In contemporary sensors for retrieving SSS, such as on Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP), sea surface temperature (SST), another parameter important for understanding ocean circulation and necessary in the retrieval of salinity, is treated as an ancillary parameter obtained from an independent source. However, both SSS and SST have peaks in sensitivity below 1 GHz; and it has been shown that measurements at multiple frequencies in this portion of the spectrum can take advantage of this peak in sensitivity to improve the accuracy of the retrieval of SSS. In this manuscript, it will be shown that there is also the potential to retrieve SST and, in cold water, the possibility for improved accuracy over existing retrievals.

Microwave remote sensing↗
NASA NTRS1977

Sea-surface temperature and salinity mapping from remote microwave radiometric measurements of brightness temperature

A technique to measure remotely sea surface temperature and salinity was demonstrated with a dual frequency microwave radiometer system. Accuracies in temperature of 1 C and in salinity of part thousand for salinity greater than 5 parts per thousand were attained after correcting for the influence of extraterrestrial background radiation, atmospheric radiation and attenuation, sea-surface roughness, and antenna beamwidth. The radiometers, operating at 1.43 and 2.65 GHz, comprise a third-generation system using null balancing and feedback noise injection. Flight measurements from an aircraft at an altitude of 1.4 km over the lower Chesapeake Bay and coastal areas of the Atlantic Ocean resulted in contour maps of sea-surface temperature and salinity with a spatial resolution of 0.5 km.

Hans-Juergen, C. B.↗
NASA NTRS2020

Implementation of Multidomain Unified Forward Operators (UFO) Within the Joint Effort for Data Assimilation Integration (JEDI): Ocean Applications

The Joint Effort for Data assimilation Integration (JEDI) is a collaborative development led by the Joint Center for Satellite Data Assimilation (JCSDA) in conjunction with NASA, NOAA and the Department of Defense (NAVY and Air Force). The (Sea-Ice Ocean and Coupled Assimilation) SOCA as one of the JCSDA projects, focuses on the application of JEDI to marine data assimilation. One of the goals of SOCA is to make use of surface-sensitive radiances to constrain sea-ice and upper ocean fields (e.g., salinity, temperature, sea-ice fraction, sea-ice temperature, etc.). The first elements toward an ocean/atmosphere coupled data assimilation capability within JEDI, with a focus on supporting and developing the assimilation of radiance observations sensitive to the ocean and atmosphere has been implemented. The direct radiance assimilation of surface sensitive microwave radiances focusing on Global Precipitation Measurement (GPM) Imager (GMI) for the SST Constraint and Soil Moisture Active Passive (SMAP) for the Sea Surface Salinity (SSS) has been the main focus. Also, in UFO the capability to calculate the cool skin layer depth and skin temperature has been implemented similar to the GEOS-5. It has been tested with GMI sea surface temperature retrievals. This is important because Satellite and in-situ observations of the Sea-Surface Temperature (SST) show high variability, including a diurnal cycle and very thin, cool skin layer in contact with the atmosphere, and Incorporating a realistic skin SST is essential for atmosphere-ocean coupled data assimilation.

Unified Forward Operators (UFO)↗
NASA NTRS2014

Weekly Gridded Aquarius L-band Radiometer-scatterometer Observations and Salinity Retrievals over the Polar Regions - Part 1: Product Description

Passive and active observations at L band (frequency (is) approximately 1.4 GHz) from the Aquarius/SAC-D mission offer new capabilities to study the polar regions. Due to the lack of polar-gridded products, however, applications over the cryosphere have been limited. We present three weekly polar-gridded products of Aquarius data to improve our understanding of L-band observations of ice sheets, sea ice, permafrost, and the polar oceans. Additionally, these products intend to facilitate access to L-band data, and can be used to assist in algorithm developments. Aquarius data at latitudes higher than 50 degrees are averaged and gridded into weekly products of brightness temperature (TB), normalized radar cross section (NRCS), and sea surface salinity (SSS). Each grid cell also contains sea ice fraction, the standard deviation of TB, NRCS, and SSS, and the number of footprint observations collected during the seven-day cycle. The largest 3 dB footprint dimensions are 97 km×156 km and 74 km×122 km (along × across track) for the radiometers and scatterometer, respectively. The data is gridded to the Equal-Area Scalable Earth version 2.0 (EASE2.0) grid, with a grid cell resolution of 36 km. The data sets start in August 2011, with the first Aquarius observations and will be updated on a monthly basis following the release schedule of the Aquarius Level 2 data sets. The weekly gridded products are distributed by the US National Snow and Ice Data Center at http://nsidc.org/data/aquarius/index.html

Aquarius↗
NASA NTRS2022

Status of the Dielectric Constant of Sea Water at L-Band for Remote Sensing of Salinity

The model expressing the dielectric constant of sea water at microwave frequencies as a function of salinity and temperature is an important element in remote sensing of sea surface salinity. It is also important independently as a description of the physical properties of salt water. A major milestone was the development in the late 1970s by Klein and Swift of a model based on laboratory measurements at L- and S-band and a functional form supported by theory for polar molecules and previous work on freshwater. Much of the subsequent work has focused on measurements at higher frequency and determining model parameters tuned to apply for applications, such as remote sensing of sea surface temperature (SST). Interest in the dielectric constant at 1.4 GHz (L-band) increased again with the development of soil moisture ocean salinity (SMOS) and Aquarius to measure salinity from space, but there have been few new measurements at L-band and often confusion regarding the applicability of new models at 1.4 GHz. The objective of this article is to compare available models in the context of how well they represent the dielectric constant of sea water at 1.4 GHz. Among the criteria applied will be the recent measurements at the George Washington University of the dielectric constant at 1.4 GHz

Microwave Remote Sensing↗
NASA NTRS2019

MERRA-2 Ocean: The NASA Global Modeling and Assimilation Office's Weakly Coupled Atmosphere-Ocean Reanalysis Using GEOS-S2S Version 3

The NASA Modern Era Reanalysis for Research and Applications (MERRA2) has been a respected and widely used reanalysis that has so far been restricted to the atmosphere. Now a newly released version of the atmosphere/ocean coupled data assimilation system (AODAS) has been developed by the NASA/Goddard Global Modeling and Assimilation Office to perform a retrospective ocean reanalysis from 1982 to present. In addition to assimilating all available in situ data (e.g. Argo, mooring, XBT and CTD data) and altimetry information into the ocean, the new version (GEOS-S2S Version 3) model includes a higher resolution, eddy-permitting ocean model than previous versions, a more realistic implementation of the atmosphere-ocean interface layer, and an improved coupling between glacier and ocean (among other improvements). In addition, this ocean data assimilation was expanded to include the assimilation of satellite sea surface salinity. The MERRA-2 AODAS will be described, and preliminary results will be shown from the assimilation reanalysis and from retrospective forecasts issued using a new ensemble strategy. Following the Global Ocean Data Assimilation Experiment (GODAE) protocols, we will present Class 1 through Class 4 validation results from the ocean reanalysis. Results indicate an improved ocean mixed layer depth, improved salinity near Greenland, an improved diurnal cycle of the sea surface skin temperature, an improved estimate of ocean evaporation, and better representation of western boundary currents (e.g. Gulf Stream) from our new ocean reanalysis. One of the motivations of this project is to provide optimal initial states for ENSO forecasting. Therefore, we will also present some preliminary results of retrospective ENSO forecasts. After thorough testing, it is expected that the GEOS-S2S Version 3 will replace our contributions to North American Multi-Model Ensemble (NMME), WCRP Subseasonal to Seasonal (S2S), and IRI seasonal prediction forecast projects.

Molod, Andrea↗
NASA NTRSDate not supplied

SMOS Salinity Retrieved from New Seawater Dielectric Constant Models at L-band

The accuracy of the Sea Surface Salinity (SSS) retrieved from L-Band radiometer measurements is strongly dependent on the accuracy of the modelling of the dielectric constant. Two new parametrizations have recently been developed based on one hand on the Soil Moisture and Ocean Salinity (SMOS) satellite multi-angular brightness temperature measurements [1] (BV) and on the other hand on new laboratory measurements [3] (GW2020). These two approaches are fully independent. The brightness temperatures, Tb, simulated with the BV and GW2020 parametrizations are compared with each other and with the ones derived from dielectric constant models previously in use in the SMOS, Soil Moisture Active Passive (SMAP) and Aquarius SSS retrievals. Tb simulated with the BV and GW2020 parametrizations agree particularly well for most SSS and SST commonly observed over the open ocean and are found to be in closer agreement than with earlier parametrizations. Nevertheless, uncertainty remains at low SST where a ∼ 0.1 K relative difference between the two models is observed. A complete reprocessing of SMOS SSS (2010–2020) has been performed using the BV parametrization instead of the Klein and Swift (1977) model previously used in SMOS processing. When compared with Argo derived near surface salinity maps, clear improvements are observed in warm and cold regions. Remaining uncertainties in cold waters will be discussed relatively to the uncertainties in SMOS Tb linked to sea ice contamination and given the constraints given by the GW2020 laboratory measurements.

J. Boutin↗