Search NASA⌕ Search

SEARCH · Search NASA

Results for “seismic activity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Identification of Geostructures of continental crust, particularly as they relate to mineral-resource evaluation

The author has identified the following significant results. Analysis of lineated lakes in the Umiat, Alaska area and comparison with known geology, gravity, and magnetic data in the the area suggest concealed structures exist at depth, possibly at or near basement, which may represent targets for petroleum exploration. Compilation of reconnaissance geologic data on 1:250,000 scale enlargements of ERTS-1 images near Corwin reveal structural and stratigraphic anomalies that suggest the Cretaceous sequence is less thick than supposed and is repeated in a series of plates superimposed by flat thrust faults. The structural style differs from that in coeval strata to the northeast, across the northwest-trending linear zone separating differing tectonic styles in older strata noted earlier. The regional extension of a fault known locally in the McCarthy area has been recognized; this fault appears to form the boundary of a significant terrane of mid-Paleozoic metamorphic rocks. ERTS-1 images are being used operationally, at 1:1,000,000 scale in the compilation of regional geologic maps, and at 1:250,000 scale in field mapping in the Brooks Range, in the study of faults in seismically active southern Alaska, in field-checking interpretations previously made from ERTS-1 imagery, and orthophoto base maps for geologic maps.

Gryc, G.↗

Strength and compressibility of returned lunar soil.

Two oedometer and three direct shear tests have been performed in vacuum on a 200 g sample of lunar soil from Apollo 12 (12001, 119). The compressibility data have been used to calculate bulk density and shear wave velocity versus depth on the lunar surface. The shear wave velocity was found to increase approximately with the one-fourth power of the depth, and the results suggest that the Apollo 14 Active Seismic Experiment may not have detected the Fra Mauro formation at a depth of 8.5 m, but only naturally consolidated lunar soil. The shear data indicate that the strength of the lunar soil sample is about 65% that of a ground basalt simulant at the same void ratio.

Carrier, W. D., III↗

Passive seismic experiment

The network of seismometers installed by the Apollo 17 and other Apollo missions is described. The effects of the impacts of lunar modules and S-4B stages on the lunar surfaces are discussed. The information concerning lunar composition which is obtained by analyzing the seismic signals generated by moonquakes and meteoroid impacts are analyzed. It is concluded that the seismic activity within the moon is extremely low compared to that with the earth. The moon is characterized by a rigid, dynamically inactive outer shell, approximately 1000 kilometers thick, surrounding a core that has markedly different elastic properties.

Latham, G. V.↗

A reconnaissance space sensing investigation of crustal structure for a strip from the eastern Sierra Nevada to the Colorado Plateau

The author has identified the following significant results. Studies were conducted in key field areas in the Sierra Nevada, the Basin Range Province and the Colorado Plateau to evaluate the origins and significance of geologic and structural anomalies expressed in the ERTS-1 data. The investigation included development of image enhancement and analysis techniques and comparison of remote sensing data available over the test site. The ERTS-1 MSS imagery has proven to be an effective tool for studying the interrelationsships between Cenozoic tectonic patterns and the distributions of Cenozoic plutonism and volcanism, seismic activity, geologic hazards, and known mineral, geothermal and ground water resources. Recommendations are made for applications of ERTS-1 data to natural and resource exploration and management.

Liggett, M. A.↗

Moonquakes, meteoroids, and the state of the lunar interior

Analysis of data returned from the four stations of the Apollo Seismic Network has revealed that the lunar interior can be divided into two major zones: a rigid, dynamically inactive outer shell, about 1000 km thick (the lunar lithosphere); and a relatively weak central zone (the lunar asthenosphere) in which partial melting is probable. The transition between these two zones is gradual. Seismic activity within the moon is far below that of the earth. The small moonquakes that do occur originate near the base of the lithosphere, and appear to fall within two major belts. Tidal energy appears to be an important, if not the dominant, source of energy released as moonquakes. A secular component of moonquake energy release may result from slight thermal expansion or contraction of the moon, weak convection in the asthenosphere, or secular recession of the moon from the earth. Lack of shallow moonquake activity implies that the moon is neither expanding nor contracting at an appreciable rate at present.

Latham, G.↗

Rock physics properties of some lunar samples

Linear strains and acoustic velocity data for lunar samples under uniaxial and hydrostatic loading are presented. Elastic properties are presented for 60335,20; 15555,68; 15498,23; and 12063,97. Internal friction data are summarized for a number of artificial lunar glasses with compositions similar to lunar rocks 12009, 12012, 14305, 15021, and 15555. Zero porosity model-rock moduli are calculated for a number of lunar model-rocks, with mineralogies similar to Apollo 12, 14, and 16 rocks. Model-rock calculations indicate that rock types in the troctolitic composition range may provide reasonable modeling of the lunar upper mantle. Model calculations involving pore crack effects are compatible with a strong dependence of rock moduli on pore strain, and therefore of rock velocities on nonhydrostatic loading. The high velocity of rocks under uniaxial loading appears to be compatible with, and may aid in, interpretation of near-surface velocity profiles observed in the active seismic experiment.

Warren, N.↗

Investigation of the daytime lunar atmosphere for lunar synthesis program

Synthesis studies of the daytime lunar atmoshere were directed toward improved understanding of fundamental lunar atmospheric dynamics and the relationship of the detectable atmosphere to physical processes of the lunar surface and interior. The primary source of data is the Apollo 17 lunar surface mass spectrometer. The Ar40 is radiogenic and its escape rate from the lunar atmosphere requires release of a significant fraction (about 8%) of the argon produced from the decay of K40 within the moon. Furthermore the process of argon release from the solid moon is time varying and related to seismic activity. Most of the helium on the moon is due to release of implanted solar wind alpha particles from the regolith.

Hodges, R. R., Jr.↗

Fiscal year 1976 progress report on a feasibility study evaluating the use of surface penetrators for planetary exploration

The feasibility of employing penetrators for exploring Mars was examined. Eight areas of interest for key scientific experiments were identified. These include: seismic activity, imaging, geochemistry, water measurement, heatflow, meteorology, magnetometry, and biochemistry. In seven of the eight potential experiment categories this year's progress included: conceptual design, instrument fabrication, instrument performance evaluation, and shock loading of important components. Most of the components survived deceleration testing with negligible performance changes. Components intended to be placed inside the penetrator forebody were tested up to 3,500 g and components intended to be placed on the afterbody were tested up to 21,000 g. A field test program was conducted using tentative Mars penetrator mission constraints. Drop tests were performed at two selected terrestrial analog sites to determine the range of penetration depths for anticipated common Martian materials. Minimum penetration occurred in basalt at Amboy, California. Three full-scale penetrators penetrated 0.4 to 0.9 m into the basalt after passing through 0.3 to 0.5 m of alluvial overburden. Maximum penetration occurred in unconsolidated sediments at McCook, Nebraska. Two full-scale penetrators penetrated 2.5 to 8.5 m of sediment. Impact occurred in two kinds of sediment: loess and layered clay. Deceleration g loads of nominally 2,000 for the forebody and 20,000 for the afterbody did not present serious design problems for potential experiments. Penetrators have successfully impacted into terrestrial analogs of the probable extremes of potential Martian sites.

Blanchard, M. B.↗

HFT events - Shallow moonquakes

A few large distant seismic events of distinctly high signal frequency, designated HFT (high-frequency teleseismic) events, are observed yearly by the Apollo lunar seismic network. Their sources are located on or near the surface of the moon, leaving a large gap in seismic activity between the zones of HFT sources and deep moonquakes. No strong regularities are found in either their spatial or temporal distributions. Several working hypotheses for the identity of these sources have advanced, but many characteristics of the events seem to favor a hypothesis that they are shallow moonquakes. Simultaneous observations of other lunar phenomena may eventually enable the determination of their true identity.

Nakamura, Y.↗

A search for gaseous emissions from the moon

A study of 19 months of data shows that relative variations in the dayside lunar ionosphere are predictable from solar-wind flux and solar extreme-ultraviolet variations. Discrepancies in the absolute magnitudes exist, however. One significant discrepancy in the predicted and observed ion-flux magnitudes probably arises from sputtered surface gases during and following an extended period of anomalously high solar-wind flux. A second minor enhancement of the observed flux over the predicted flux may be due to endogenous lunar gas associated with an interval of high lunar seismic activity. However, considerable restraint is necessary in this interpretation since the enhancement is not strong and the interval follows within a few months after the Apollo 17 mission.

Freeman, J. W.↗

Regional variations in upper mantle compressional velocities beneath southern California 1. Post-shock temperatures: Their experimental determination, calculation, and implications, 2.

The compressional velocity within the upper mantle beneath Southern California is investigated through observations of the dependence of teleseismic P-delays at all stations of the array on the distance and azimuth to the event. The variation of residuals with azimuth was found to be as large as 1.3 sec at a single station; the delays were stable as a function of time, and no evidence was found for temporal velocity variations related to seismic activity in the area. These delays were used in the construction of models for the upper mantle P-velocity structure to depths of 150 km, both by ray tracing and inversion techniques. The models exhibit considerable lateral heterogeneity including a region of low velocity beneath the Imperial Valley, and regions of increased velocity beneath the Sierra Nevada and much of the Transverse Ranges. The development is described of a technique for the experimental determination of post-shock temperatures, and its application to several metals and silicates shocked to pressures in the range 5 to 30 GPa. The technique utilizes an infra-red radiation detector to determine the brightness temperature of the free surface of the sample after the shock wave has passed through it.

Raikes, S. A.↗

A comparison of two types of velocity models for the lunar crust: Smooth continuous and stepwise layered

The data from the Apollo-14 and Apollo-16 Active Seismic Experiments were reanalyzed and show that a power-law velocity variation with depth is consistent with both the traveltimes and amplitudes of the first arrivals for source-to-geophone separations up to 32m. The data were improved by removing spurious glithches, flickering and stacking. While this improved the signal-to-noise ratios, it was not possible to measure the arrivals beyond 32m. The physical evidence that the shallow lunar regolith is made up of fine particles adds weight to the 1/6-power velocity model. The 1/6-power law predicts the traveltime t(x), varies with separation, x, as t(x) = t sub 0 (x/x sub 0) to the 5/6 power and, using a first-order theory, the amplitude, A(x), varies as A(x) = A sub 0 (x/x sub 0) to the (13-m)/12, M 1; the layer-velocity model predicts t(x) = t sub 0 (x/xsub 0) and A(x) = A sub 0 (x/x sub 0) to the 2nd power.

Gangi, A. F.↗

Martian seismicity

During the Viking mission to Mars, the seismometer on Lander II collected approximately 0.24 earth years of observational data, excluding periods of time dominated by wind-induced Lander vibration. The 'quiet-time' data set contains no confirmed seismic events. A proper assessment of the significance of this fact requires quantitative estimates of the expected detection rate of the Viking seismometer. The first step is to calculate the minimum magnitude event detectable at a given distance, including the effects of geometric spreading, anelastic attenuation, seismic signal duration, seismometer frequency response, and possible poor ground coupling. Assuming various numerical quantities and a Martian seismic activity comparable to that of intraplate earthquakes, the appropriate integral gives an expected annual detection rate of 10 events, nearly all of which are local. Thus only two to three events would be expected in the observational period presently on hand and the lack of observed events is not in gross contradiction to reasonable expectations. Given the same assumptions, a seismometer 20 times more sensitive than the present instrument would be expected to detect about 120 events annually.

Goins, N. R.↗

Passive seismic experiment - A summary of current status

The data set obtained from the four-station Apollo seismic network including signals from approximately 11,800 events, is surveyed. Some refinement of the lunar model will result, but its gross features remain the same. Attention is given to the question of a small, molten lunar core, the answer to which remains dependent on analysis of signals from a far side impact. Seventy three sources of repeating, deep moonquakes have been identified, thirty nine of which have been accurately located. Concentrated at depths from 800 to 1000 km, the periodicities of these events have led to the hypothesis that they are generated by tidal stresses. Lunar seismic data has also indicated that the meteoroid population is ten times lower than originally determined from earth based observations. Lunar seismic activity is much lower and mountainous masses show no sign of sinking, in contrast to earth, as a result of the lunar crust being four times thicker. While much work remains to be done, significant correlation between terrestrial and lunar observations can be seen.

Latham, G. V.↗

Velocity structure of the shallow lunar crust

Data from the thumper shots of the Apollo 14 and Apollo 16 active seismic experiments, testing whether the velocity variation in the shallow lunar crust (depths less than or equal to 10 m) can be represented by a self-compacting-power-layer or by a constant-velocity-layer model, are analyzed. Although filtering and stacking improved the S/N ratios, it was found that measuring the arrival times or amplitudes of arrivals beyond 32 m was not possible. The data quality precluded a definitive distinction between the power-law velocity variation and the layered-velocity model. Furthermore, it was found that the shallow lunar regolith is made up of fine particles, which supports the idea of a 1/6 power-velocity model. Analysis of the amplitudes of first arrivals revealed large errors in the data due to variations in the geophone sensitivities and shot strengths; a least-squares method, that uses data redundancy was employed to eliminate them.

Gangi, A. F.↗

Time-dependent gravity in Southern California, May 1974 to April 1979

The Southern California gravity survey, begun in May 1974 to obtain high spatial and temporal density gravity measurements to be coordinated with long-baseline three dimensional geodetic measurements of the Astronomical Radio Interferometric Earth Surveying project, is presented. Gravity data was obtained from 28 stations located in and near the seismically active San Gabriel section of the Southern California Transverse Ranges and adjoining San Andreas Fault at intervals of one to two months using gravity meters relative to a base station standard meter. A single-reading standard deviation of 11 microGal is obtained which leads to a relative deviation of 16 microGal between stations, with data averaging reducing the standard error to 2 to 3 microGal. The largest gravity variations observed are found to correlate with nearby well water variations and smoothed rainfall levels, indicating the importance of ground water variations to gravity measurements. The largest earthquake to occur during the survey, which extended to April, 1979, is found to be accompanied in the station closest to the earthquake by the largest measured gravity changes that cannot be related to factors other than tectonic distortion.

Whitcomb, J. H.↗

On the geodetic stability of the Goddard Optical Research Facility

Seismic observations of earthquakes and blasts, geologic analysis of Landsat images, and a search of the historical record was examined. However, no evidence for tectonic motion was found. Some faulting is present in the area but no evidence of seismic activity was found. No elastic resonances in the range from 0.3 to 15 Hz were found. It is concluded that, except for ground water induced changes, the facility is stable at least to the 0.5 cm level.

Webster, W. J., Jr.↗