Search NASA⌕ Search

SEARCH · Search NASA

Results for “selective dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Determination of Main Components of Glass-Forming Cu–Zr Alloys

A rapid procedure is developed for determination of copper and zirconium in their binary alloys Cu{sub 100–x}Zr{sub x} in the content ranges corresponding to the region of bulk amorphization (x = 30–70) using inductively coupled plasma atomic emission spectroscopy (ICP-AES). The spectrometer operating conditions are optimized, and the analytical spectral lines (Cu II 224.700 nm and Zr II 354.262 nm) are selected, as well as calibration method and sampling procedure: dissolution in the mixture of HNO{sub 3} and HF with addition of HCl, providing for the minimum standard deviation of the analytical signal. A procedure of oxygen determination by inert gas fusion technique and a procedure for determination of copper by spectrophotometry and zirconium by gravimetric analysis in a single sample together with quality control of ICP-AES are developed for the considered alloys. The results of analysis of Cu{sub 100–x}Zr{sub x} alloys according to the developed procedures agree well between themselves and accounting for adjustment of oxygen content agree within the error limits (not more than 0.5 wt %) with the added content of copper and zirconium upon synthesis.

36 MATERIALS SCIENCE↗

SCIX IMPACT ON DWPF CPC

A program was conducted to systematically evaluate potential impacts of the proposed Small Column Ion Exchange (SCIX) process on the Defense Waste Processing Facility (DWPF) Chemical Processing Cell (CPC). The program involved a series of interrelated tasks. Past studies of the impact of crystalline silicotitanate (CST) and monosodium titanate (MST) on DWPF were reviewed. Paper studies and material balance calculations were used to establish reasonable bounding levels of CST and MST in sludge. Following the paper studies, Sludge Batch 10 (SB10) simulant was modified to have both bounding and intermediate levels of MST and ground CST. The SCIX flow sheet includes grinding of the CST which is larger than DWPF frit when not ground. Nominal ground CST was not yet available, therefore a similar CST ground previously in Savannah River National Laboratory (SRNL) was used. It was believed that this CST was over ground and that it would bound the impact of nominal CST on sludge slurry properties. Lab-scale simulations of the DWPF CPC were conducted using SB10 simulants with no, intermediate, and bounding levels of CST and MST. Tests included both the Sludge Receipt and Adjustment Tank (SRAT) and Slurry Mix Evaporator (SME) cycles. Simulations were performed at high and low acid stoichiometry. A demonstration of the extended CPC flowsheet was made that included streams from the site interim salt processing operations. A simulation using irradiated CST and MST was also completed. An extensive set of rheological measurements was made to search for potential adverse consequences of CST and MST and slurry rheology in the CPC. The SCIX CPC impact program was conducted in parallel with a program to evaluate the impact of SCIX on the final DWPF glass waste form and on the DWPF melter throughput. The studies must be considered together when evaluating the full impact of SCIX on DWPF. Due to the fact that the alternant flowsheet for DWPF has not been selected, this study did not consider the impact of proposed future alternative DWPF CPC flowsheets. The impact of the SCIX streams on DWPF processing using the selected flowsheet need to be considered as part of the technical baseline studies for coupled processing with the selected flowsheet. In addition, the downstream impact of aluminum dissolution on waste containing CST and MST has not yet been evaluated. The current baseline would not subject CST to the aluminum dissolution process and technical concerns with performing the dissolution with CST have been expressed. Should this option become feasible, the downstream impact should be considered. The main area of concern for DWPF from aluminum dissolution is an impact on rheology. The SCIX project is planning for SRNL to complete MST, CST, and sludge rheology testing to evaluate any expected changes. The impact of ground CST transport and flush water on the DWPF CPC feed tank (and potential need for decanting) has not been defined or studied.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dissolution of used nuclear fuel using a tributyl phosphate/n-paraffin solvent

The complete recycle of used nuclear fuel (UNF) is necessary to recover the energy value from the remaining U and higher actinides; yet, construction of a large-scale facility is extremely expensive. To address this issue, a hybrid process was evaluated in which UNF pretreated for tritium removal is dissolved in a tributyl phosphate (TBP) solvent. The distribution of the actinides and selected fission products was measured between the solvent and residual solids. Dissolution of these elements in the surrogate fuels was very effective. Most fission products from fuel irradiation except for the lanthanide elements would remain in the undissolved solids.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Progress toward bridging from atomistic to continuum modeling to predict nuclear waste glass dissolution.

This report summarizes research performed for the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Subcontinuum and Upscaling Task. The work conducted focused on developing a roadmap to include molecular scale, mechanistic information in continuum-scale models of nuclear waste glass dissolution. This information is derived from molecular-scale modeling efforts that are validated through comparison with experimental data. In addition to developing a master plan to incorporate a subcontinuum mechanistic understanding of glass dissolution into continuum models, methods were developed to generate constitutive dissolution rate expressions from quantum calculations, force field models were selected to generate multicomponent glass structures and gel layers, classical molecular modeling was used to study diffusion through nanopores analogous to those in the interfacial gel layer, and a micro-continuum model (K{mu}C) was developed to study coupled diffusion and reaction at the glass-gel-solution interface.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Pore-Scale Analysis of Calcium Carbonate Precipitation and Dissolution Kinetics in a Microfluidic Device

In this work, we have characterized the calcium carbonate (CaCO 3 ) precipitates over time caused by reaction-driven precipitation and dissolution in a micromodel. Reactive solutions were continuously injected through two separate inlets, resulting in transverse-mixing induced precipitation during the precipitation phase. Subsequently, a dissolution phase was conducted by injecting clean water (pH = 4). The evolution of precipitates was imaged in two and three dimensions (2-, 3-D) at selected times using optical and confocal microscopy. With estimated reactive surface area, effective precipitation and dissolution rates can be quantitatively compared to results in the previous works. Our comparison indicates that we can evaluate the spatial and temporal variations of effective reactive areas more mechanistically in the microfluidic system only with the knowledge of local hydrodynamics, polymorphs, and comprehensive image analysis. Here, our analysis clearly highlights the feedback mechanisms between reactions and hydrodynamics. Pore-scale modeling results during the dissolution phase were used to account for experimental observations of dissolved CaCO 3 plumes with dissolution of the unstable phase of CaCO 3 . Mineral precipitation and dissolution induce complex dynamic pore structures, thereby impacting pore-scale fluid dynamics. Pore-scale analysis of the evolution of precipitates can reveal the significance of chemical and pore structural controls on reaction and fluid migration.

58 GEOSCIENCES↗

Visualizing degradation mechanisms in a gas-fed CO 2 reduction cell via operando X-ray tomography

We utilize operando X-ray computed tomography, coupled with real-time electrochemical analysis, to reveal the underlying failure mechanisms of membrane electrode assemblies (MEAs) for electrochemical CO 2 reduction (eCO 2 R). Through operando imaging, we can obtain unprecedented insights into the dynamic behavior of the MEA under different operating conditions, revealing critical changes in interface interactions, phase distribution, and structural integrity over time. Our findings identify phenomena giving rise to the transition from CO 2 R to the hydrogen evolution reaction (HER), as evidenced by shifts in cathode potential and CO 2 R selectivity. The formation of inhomogeneous precipitates at the gas diffusion electrode disrupts the CO 2 supply and reduces the active sites for eCO 2 R, resulting in a shift toward H2 production during low current density operation. Additionally, under high current density conditions, rapid water crossover up to the microporous layer/gas diffusion layer promotes the transition from CO 2 R to HER, further shifting cell potential toward anodic direction. Oscillating voltage conditions reveal the dissolution and regrowth of precipitates, providing direct visualization of the competing selectivity of CO 2 R and HER. This work offers new insight into the degradation mechanisms of MEAs, with implications for the design of more durable CO 2 R systems.

Lee, Sol A [California Institute of Technology (Ca↗

Improved room-temperature-selectivity between Nd and Fe in Nd recovery from Nd-Fe-B magnet

The sustainable society requires the recycling of rare metals. Rare earth Nd is one of rare metals, accompanying huge consumption especially in Nd-Fe-B magnets. Although the wet process using acid is in practical use in the in-plant recycle of sludge, higher selectivity between Nd and Fe at room temperature is desired. We have proposed a pretreatment of corrosion before the dissolution into HCl and the oxalic acid precipitation. The corrosion produces γ-FeOOH and a Nd hydroxide, which have high selectivity for HCl solution at room temperature. Nd can be recovered as Mn{sub 2}O{sub 3}-type Nd{sub 2}O{sub 3}. The estimated recovery-ratio of Nd reaches to 97%.

36 MATERIALS SCIENCE↗

Effect of CO 2 -brine-rock reactions on pore architecture and permeability in dolostone: Implications for CO 2 storage and EOR

Geologic carbon sequestration (GCS) is considered a feasible technology for storing substantive volumes of greenhouse gases in subsurface geological formations. In the reservoir, far from carbon dioxide (CO 2 ) injection wells or in post-injection scenarios, diffusion dominates over advection. This condition conjoins with spatially distributed geochemical reactions to induce heterogeneous changes in pore architecture, i.e. pore body and throat sizes or surface roughness. These changes can affect CO 2 transport properties and storage capacity. In this work, we investigated mineral dissolution and precipitation in dolomite samples saturated with a CO 2 -saturated brine at 93 °C and 34.5 MPa, aged without flow. Two rock types samples, i.e. intergranular- and vuggy-dominant, were selected to investigate changes in pore size, porosity and permeability under reactive conditions. Mineral dissolution and precipitation were characterized using scanning electron microscopy. Changes in pore size were quantified via time-domain nuclear magnetic resonance (TD-NMR) transverse relaxation time (T 2 ) and diffusion coefficient (D) distributions. We show that mineral dissolution likely occurs in highly permeable pathways. These observations are confirmed through analysis of (T 2 ) and diffusion coefficient (D) distributions. In contrast to results during CO 2 -enriched brine continuous injection, mineral precipitation was observed in micropores. The leftward shift of the T 2 peaks, corresponding to micropores, also evidenced mineral precipitation in lowpermeability zones. However, microscale alterations resulted only in a subtle increase in porosity and permeability. Results in this study shed light on effects of geochemical reactions on alteration of rock properties in diffusion-dominated regions during CO 2 storage.

58 GEOSCIENCES↗

Chemical stability of Lithium 2-trifluoromethyl-4,5-dicyanoimidazolide, an electrolyte salt for Li-ion cells

Lithium hexafluorophosphate (LiPF 6 ) is ubiquitous in commercial lithium-ion batteries, but it is hydrolytically unstable and corrosive on electrode surfaces. Using a more stable salt would confer multiple benefits for high-voltage operation, but many such electrolyte systems facilitate anodic dissolution and pitting corrosion of aluminum current collectors that negate their advantages. Lithium 2-trifluoromethyl-4,5-dicyanoimidazolide (LiTDI) is a new salt that was designed specifically for high-voltage cells. In this study we demonstrate that in carbonate electrolytes, LiTDI prevents anodic dissolution of Al current collectors, which places it into a select group of corrosion inhibitors. However, we also demonstrate that LiTDI becomes reduced on lithiated graphite, undergoing sequential defluorination and yielding a thick and resistive solid-electrolyte interphase (SEI), which increases impedance and lowers electrode capacity. The mechanistic causes for this behavior are examined using computational chemistry methods in the light of recent spectroscopic studies. Here, we demonstrate that LiTDI reduction can be prevented by certain electrolyte additives, which include fluoroethylene carbonate, vinylene carbonate and lithium bis(oxalato)borate. This beneficial action is due to preferential reduction of these additives over LiTDI at a higher potential vs. Li/Li + , so the resulting SEI can prevent the direct reduction of LiTDI at lower potentials on the graphite electrode.

25 ENERGY STORAGE↗

Maintaining Hydrophobic Drug Supersaturation in a Micelle Corona Reservoir

In this work, two poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) (PND) statistical copolymers and a series of three poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide)- b-polystyrene (PND-b-PS-C12) diblock polymers were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization, in which the molecular weight of the thermoresponsive PND corona block was held constant while the polystyrene core block length was varied. The corona thickness and density of the micelles in phosphate-buffered saline (PBS, pH = 6.5) were quantified by a combination of dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS). Two hydrophobic model drugs, phenytoin and nilutamide, were used to examine the drug-polymer interactions in aqueous solution. Intermolecular interactions between the diblock polymer micelle corona and both drugs were revealed by 2D 1H nuclear Overhauser effect spectroscopy (NOESY). The drug-polymer “binding” strength, quantified by diffusion ordered NMR spectroscopy (DOSY), increased as corona density of the diblock polymer micelle increased for both drugs. The in vitro dissolution of the amorphous solid dispersions was systematically investigated as a function of drug type, drug loading, and the solution-state assembly of the polymers by using either a selective or nonselective spray drying solvent. Forming micelles prior to spray drying significantly enhanced phenytoin dissolution and supersaturation maintenance for the diblock polymers by storing the drug molecules in the corona.

60 APPLIED LIFE SCIENCES↗

Voucher Opportunity 5-15: Independent Assessment of Monitoring, Reporting, and Verification (MRV) Technologies and Practices for Enhanced Rock Weathering (CRADA 718) Abstract

Development of robust, transparent, and precise monitoring, reporting, and verification (MRV) technologies and practices is critical for carbon dioxide removal (CDR) project developers to comply with regulatory and permitting requirements, voluntary carbon market (VCM) protocols, and to ensure safety while reducing environmental impacts. Enhanced rock weathering (ERW)-based CDR technologies focus on removing atmospheric carbon through conversion into thermodynamically stable solid or aqueous carbonate forms for permanent storage (i.e., mineralization). This highly durable form of CDR enhances naturally occurring silicate rock weathering cycles by optimizing application of finely-ground silicate rock particles (i.e., from basalt) on terrestrial agricultural lands to accelerate natural silicate rock weathering and mineralization. Enhanced rock weathering may also provide improved crop yields and enhance soil health. A critical aspect for commercialization of these technologies is the development of MRV to quantify the net removal and durable storage of atmospheric CO 2 . For ERW systems, it is essential to accurately characterize the mineral feedstock selected for application to establish the baseline geochemical composition, mineral dissolution rates, and carbon removal potential of the feedstocks to estimate overall net removal. Given the difficulty with conducting MRV for ERW in diverse soil/environment types, over large application areas, and due to complex chemical reaction networks, this project will accelerate understanding towards consensus on best practices for MRV. The overall objectives of the proposed voucher project are to: 1) Characterize and analyze feedstock(s) intended for ERW field application by Lithos Carbon (“Voucher Recipient”/ “CRADA Participant”) to determine overall mineralization potential; 2) Facilitate knowledge transfer and documentation of experimental protocols, instrumentation, and other relevant best practices; and 3) Support the Voucher Recipient’s broader technology commercialization and ERW Research Facility development plans. This work will align with the Voucher Recipient’s MRV plans for field sites and build upon complementary efforts conducted by PNNL on mineralization MRV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heuristic Computational Model for Predicting Lignin Solubility in Tailored Organic Solvents

Lignin is a random heteropolymer that has been extensively studied as a renewable source of aromatic precursors for high-value chemicals, biofuels, and bioplastics. A key challenge in lignin valorization is the structural and compositional heterogeneity of lignin feedstocks. Solvent-based approaches are commonly used to fractionate lignin to reduce this heterogeneity, but solvent selection can be challenging due to variability in lignin composition. In this work, we developed computational methods to predict good and poor organic solvents as a function of lignin composition. We analyzed 28 different linear pentamer structures, 18 from known libraries and 10 hypothetical polymers, and calculated their activity coefficients in 50 different organic solvents by using the conductor-like screening model for realistic solvents. We used these data to train a regression model that enabled the extensive investigation of the impact of solvent and monolignol compositions on predicted lignin solubility. The exhaustive exploration of solubility trends using model predictions revealed sets of solvents, identified using Kamlet–Taft parameters, that are predicted to promote lignin dissolution regardless of lignin composition. We further identified solvents expected to selectively isolate lignin fractions enriched in certain subunits. Furthermore, these results establish heuristic guidelines for solvent selection that can be used to tailor fractionation processes for lignin feedstocks of distinct composition or to design new processes that isolate fractions with higher proportions of selected subunits.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective collection of iron-rich dust particles by natural Trichodesmium colonies

Abstract Dust is an important iron (Fe) source to the ocean, but its utilization by phytoplankton is constrained by rapid sinking and slow dissolution dust-bound iron (dust-Fe). Colonies of the globally important cyanobacterium, Trichodesmium, overcome these constraints by efficient dust capturing and active dust-Fe dissolution. In this study we examined the ability of Trichodesmium colonies to maximize their Fe supply from dust by selectively collecting Fe-rich particles. Testing for selectivity in particle collection, we supplied ~600 individual colonies, collected on multiple days from the Gulf of Aqaba, with natural dust and silica minerals that were either cleaned of or coated with Fe. Using a stereoscope, we counted the number of particles retained by each colony shortly after addition and following 24 h incubation with particles, and documented translocation of particles to the colony core. We observed a strong preference for Fe-rich particles over Fe-free particles in all tested parameters. Moreover, some colonies discarded the Fe-free particles they initially collected. The preferred collection of Fe-rich particles and disposal of Fe-free particles suggest that Trichodesmium can sense Fe and selectively choose Fe-rich dust particles. This ability assists Trichodesmium obtain Fe from dust and facilitate its growth and subsequent contribution to nutrient cycling and productivity in the ocean.

54 ENVIRONMENTAL SCIENCES↗

Formate-Induced Dissolution and Reprecipitation of a Copper Electrocatalyst during Electrochemical CO 2 Reduction Reaction

Catalyst size, morphology, and crystal structure play crucial roles in determining the activity and selectivity of electrochemical CO 2 reduction reactions, which are known to change during the reaction process. A comprehensive understanding of how, when, and why these parameters evolve under operational conditions is essential for developing stable, efficient, and selective catalysts. In this study, we reveal that formate, one of the reaction products, contributes to the degradation of copper catalysts through a ligand-assisted dissolution mechanism. Utilizing in situ electrochemical atomic force microscopy and ex-situ scanning and transmission electron microscopies, we observed a significant reduction in the size of copper nanoparticles, which decreased from over 30 nm to less than 10 nm in diameter within 60 min of CO 2 RR. The temporal production of formate correlated with the particle size changes. Furthermore, analysis of the electrolyte using inductively coupled plasma optical emission spectroscopy confirmed the dissolution of copper nanoparticles. Control experiments involving various reaction products (H 2 , CO, and HCOO – ) demonstrated that formate significantly promotes copper dissolution, thereby highlighting its role in the ligand-assisted dissolution mechanism of copper electrocatalysts. In conclusion, our findings provide critical insights into copper catalyst behavior during electrochemical CO 2 reduction, facilitating the design of more resilient and effective electrocatalysts.

Catalysts↗

Elemental characterization of crystalline silicotitanate following Hanford tank waste processing

To expedite vitrification of low activity waste at the Hanford Site, a Tank-Side Cesium Removal system is being evaluated. This method utilizes an inorganic ion exchange (IX) media, crystalline silicotitanate (CST), to remove 99.9% of the 137Cs from tank waste supernate. Laboratory scale testing of the ion exchange process has been conducted by Pacific Northwest National Laboratory to evaluate Cs removal with CST in supernates collected from Hanford tanks 241-AP-107 and 241-AW-102 under prototypic plant operating conditions. In an effort to understand the selectivity and partitioning of other analytes toward CST, specifically Resource Conservation and Recovery Act (RCRA) hazardous metals, selected +2 cations, and transuranic elements, a method for the complete dissolution of CST and Cs removal from the digestate was applied to the spent CST post-processing Hanford tank waste. The CST was shown to adsorb a relevant fraction of Ca, Cd, Pb, Sr, and potentially Fe by IX and/or other mechanisms. The spent CST also adsorbed actinides, including U, Pu, Np, and Am. This work discusses digestion of CST and removal of Cs from the digestate allowing effective analysis and provides insight as to what analytes may be competing for IX sites on the CST media.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

KOH based selective wet chemical etching of AlN, Al{sub x}Ga{sub 1−x}N, and GaN crystals: A way towards substrate removal in deep ultraviolet-light emitting diode

A controllable and smooth potassium hydroxide-based wet etching technique was developed for the AlGaN system. High selectivity between AlN and Al{sub x}Ga{sub 1−x}N (up to 12×) was found to be critical in achieving effective substrate thinning or removal for AlGaN-based deep ultraviolet light emitting diodes, thus increasing light extraction efficiency. The mechanism of high selectivity of AlGaN as a function of Al composition can be explained as related to the formation and dissolution of oxide/hydroxide on top of N-polar surface. Cross-sectional transmission electron microscopic analysis served as ultimate proof that these hillocks were not related to underlying threading dislocations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing the Radial Chemistry of Getter Components in Light Water Reactors via Controlled Electrochemical Dissolution

Getters are among the key functional components in the Tritium Producing Burnable Absorber Rods (TPBARs) of Light Water Reactors, and are used to capture the released tritium gas. They are cylindrical tubes comprised of the alloy zircaloy-4 which is coated with nickel plating both internally and externally. Their exposure to tritium as well as the irradiation environments in the light water reactors changes their structure, chemical composition and chemistry. Understanding the radial tritium distribution is key to gaining insight into the evolution of new chemistry upon irradiation in order to predict getter performance. Consequently, efforts are underway to devise a method that can allow selective probing into the getter core radially to probe the chemistry akin to carefully and selectively peeling of the layers of an onion. We have recently devised an electrochemical dissolution technique for controlled radial dissolution of zirconium based liners; this work describes the first proof-of-concept demonstration of the applicability of this technique on the controlled radial dissolution of nickel plated getters. The technique is complemented with periodic analysis of the electrolyte solution to measure the rates of release of the various elemental components and therefore glean information on their radial distribution across the getter; further complementary microscopy on the exposed surfaces allows us insight into the chemistry at the getter core.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

FRIT DEVELOPMENT FOR HIGH LEVEL WASTE SLUDGE BATCH 5: COMPOSITIONAL TRENDS FOR VARYING ALUMINUM CONCENTRATIONS

The objective of this study was to experimentally measure the properties and performance of a series of glasses with compositions that could represent Sludge Batch 5 (SB5) as processed at the Defense Waste Processing Facility (DWPF). The data was used to provide recommendations to the Liquid Waste Organization (LWO) regarding blending and washing strategies in preparing SB5 based on acceptability of the glass compositions. These data were also used to guide frit optimization efforts as the SB5 composition was finalized. Glass compositions for this study were developed by combining a series of SB5 composition projections with a group of frits. Three composition projections for SB5 were developed using a model-based approach at Savannah River National Laboratory (SRNL). These compositions, referred to as SB5 Cases B, C and D, projected removal of 25, 50 and 75% (respectively) of the aluminum in Tank 51 through the low temperature aluminum dissolution process. The frits for this study (Frits 530 through 537) were selected based on their predicted operating windows (i.e., ranges of waste loadings over which the predicted properties of the glasses were acceptable) and their potential (based on historical trends) to provide acceptable melt rates for SB5. Six additional glasses were designed to evaluate alternatives for uranium in DWPF-type glasses used for variability studies and some scoping studies. Since special measures are necessary when working with uranium-containing glasses in the laboratory, it is desirable as a cost and time saving measure to find an alternative for uranium to support frit optimization efforts. Hafnium and neodymium were investigated as potential surrogates for uranium, and other glasses were made by simply excluding the radioactive components and renormalizing the glass composition. The study glasses were fabricated and characterized at SRNL. Chemical composition analyses suggested only minor difficulties in meeting the targeted compositions for some of the oxides for some of the glasses. Although minor differences were observed, they did not have a significant impact on the conclusions made in this study. Several of the study compositions showed retention of more than 0.5 wt% SO{sub 4}{sup 2-} in glass. Trevorite (a spinel) was the only crystalline phase that was positively identified in a few of the study glasses after the canister centerline cooled (CCC) heat treatment. Spinels are not of concern as they have been shown to have little impact on the durability of high level waste glasses. The crystallization behavior of the surrogate glasses was generally the same as that of their U{sub 3}O{sub 8}-containing counterparts. There are two pairs that were exceptions: SB5-04 (amorphous) and SB5-24 (possible trevorite), along with SB5-07 (amorphous) and SB5-25 (trevorite). In these cases, the surrogate glasses (SB5-24 and SB5-25) appear to be more conservative (more prone to crystallization) than their U{sub 3}O{sub 8}-containing counterparts. Chemical durability was quantified using the Product Consistency Test (PCT). The normalized leachate (NL) values for B, Li, Na and Si for all of the study glasses were well below those of the Environmental Assessment (EA) benchmark glass, regardless of heat treatment or compositional view. This indicates that all of the glasses had very acceptable durability performance. The highest NL [B] for the study glasses was 0.914 g/L (the quenched version of glass SB5-13), normalized using the measured, bias-correct composition. There was little practical impact of the CCC heat treatment on the PCT responses of the study glasses. The measured PCT responses were predictable by the current {Delta}G{sub p} models. In general, the PCT responses for the surrogate glasses or the glasses without U{sub 3}O{sub 8} were quite similar to their U{sub 3}O{sub 8}-containing counterparts. The average percent error in NL [B] normalized by the measured, bias-corrected compositions for the surrogate glasses compared with their radioactive counterparts was 8.8%. The largest difference in NL [B] was 0.152 g/L. While similarities existed in crystallization behavior and PCT response for both the surrogates and the glasses renormalized without U{sub 3}O{sub 8}, additional data must be collected before the best solution to fabricating test glasses without radioactive components can be identified. Further surrogate studies are currently underway at SRNL. The results of this study indicate that a frit composition can be identified that will provide a processable and durable glass when combined with SB5 at the DWPF. Additional studies are underway to recommend a frit that continues to meet process and performance requirements as well as to provide an enhanced melt rate for improved waste throughput.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗