Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Catalogue of geoidal variations for simple seafloor topographic features

A catalogue is presented of theoretical geoidal variations for three types of structural features common to the earth's surface: seamounts, submarine ridges, and submarine trenches. These structures were simulated by simple geometric shapes modeled in three-dimensions. A computer program calculated the potential and gravitational variations over the models. Profile plots of geoidal variations and free-air gravity anomalies are presented over cross-sections of the structures. A ready reference information set is provided for comparison with satellite altimeter data for ocean areas.

Bowin, C.↗
NASA NTRS1974

Effect of aerosol emission on the inference of trace gas concentrations from limb radiance data

This note reports on an analysis of atmospheric emission spectra in the 10-12 micron region measured with a limb-oriented balloon-borne spectrometer. Data clearly show the existence of an additional feature at 10.8 microns which is probably due to measurement contamination from aerosols. The 10.8 micron emitter has a strong reducing effect on the HNO3 mixing ratio profile as determined by application of a symmetrical band shape model to the 10.8 spectral feature.

Remsberg, E. E.↗
NASA NTRS1977

Size-dependence in the shape of fresh impact craters on the moon

The transition from small simple craters to large complex or modified craters is characterized by eleven changes in the shape of fresh lunar craters which occur within a diameter range of 10 to 30 km. In the present paper, seven ratio-level variations - those of rim-crest diameter with depth, rim height, flank width, rimwall slope, floor diameter, circularity, and rim-crest evenness - are defined for fresh-appearing craters from the new Apollo data and are expressed mathematically where practicable. These relations constitute a shape model for interpreting fresh craters on the moon. The size dependent changes reflect the occurrence of central peaks, rimwall terraces, and a flat floor within craters measuring 10 to 20 km in diameter.

Pike, R. J.↗
NASA NTRS1986

Supersonic wind tunnel optimization

Attention is given to major problems arising in the course of definition studies for an optimum supersonic wind tunnel facility that incorporates advanced technologies. The issues identified encompass (1) large amplitude stream disturbances due to acoustic radiation from nozzle wall boundary layers; (2) flow field and model shape distortion caused by sting supports and their installation; (3) lack of sufficient three-dimensional flow visualizaton and diagnostic capabilities that allow ready identification of 'Reynolds number effects'; (4) lack of aerodynamic/propulsion facilities for investigation of the requisite range of vehicle attitudes and transient propulsion behavior; and (5) inordinately large energy usage, primarily due to diffuser inefficiency. Remedies are offered for these problems.

Bushnell, D. M.↗
NASA NTRS1988

Galileo probe parachute test program: Wake properties of the Galileo probe at Mach numbers from 0.25 to 0.95

The results of surveys of the near and far wake of the Galileo Probe are presented for Mach numbers from 0.25 tp 0.95. The trends in the data resulting from changes in Mach number, radial and axial distance, angle of attack, and a small change in model shape are shown in crossplots based on the data. A rationale for selecting an operating volume suitable for parachute inflation based on low Mach number flight results is outlined.

Canning, Thomas N.↗
NASA NTRS1988

An automated computerized vision technique for determination of three-dimensional object geometry

It is very important to determine three dimensional geometry of objects quickly in various military, space, construction, and industrial applications. An automatic scheme to obtain three dimensional geometry of objects by employing only one camera is presented. At present, this technique is applicable to a limited category of objects, satisfying the following constraints: they are flat-surfaces, and all the vertex points have to be recognized as corner points of the two dimensional image. The scheme consists of corner detection, data communication, camera calibration techniques and point searching and matching, edge cancelation, and creation procedures. An L shaped model is chosen as a test object. Experimental results demonstrated the reconstruction of this object geometry within 5 mm discrepancy. This scheme is quite convenient, efficient to use and can be applied to a wide range of problems in the real world.

Chiang, Pen-Tai↗
NASA NTRS1988

A representational framework and user-interface for an image understanding workstation

Problems in image understanding involve a wide variety of data (e.g., image arrays, edge maps, 3-D shape models) and processes or algorithms (e.g., convolution, feature extraction, rendering). The underlying structure of an Image Understanding Workstation designed to support mulitple levels and types of representations for both data and processes is described, also the user-interface. The Image Understanding Workstation consists of two parts: the Image Understanding (IU) Framework, and the user-interface. The IU Framework is the set of data and process representations. It includes multiple levels of representation for data such as images (2-D), sketches (2-D), surfaces (2 1/2 D), and models (3-D). The representation scheme for processes characterizes their inputs, outputs, and parameters. Data and processes may reside on different classes of machines. The user-interface to the IU Workstation gives the user convenient access for creating, manipulating, transforming, and displaying image data. The user-interface follows the structure of the IU Framework and gives the user control over multiple types of data and processes. Both the IU Framework and user-interface are implemented on a LISP machine.

Schroeder, Joyce D.↗
NASA NTRS1989

The gravitational field of Phobos

The external gravitational field produced by a rigid body of uniform density but irregular shape is formulated in terms of spherical harmonics. The formalism is applied to the Martian satellite Phobos. Based on a three-dimensional shape model of Phobos by Duxbury (1989), the gravitational coefficients up to degree and order 4 for a homogeneous Phobos are computed. In particular, J2 is found to be 0.105. The in-plane libration amplitude of a homogeneous Phobos is predicted to be 0.97 deg, within the rather large uncertainty of the observed value of 0.78 + or - 0.4 deg.

Chao, B. Fong↗
NASA NTRS1991

A hybrid approach to test-analysis-model development for large space structures

The present FEM reduction method for the generation of test-analysis-models (TAMs) in test-analysis correlation addresses contentions that the current modal TAM is hypersensitive to differences between test model shapes and analysis mode shapes, thereby generating large off-diagonal terms within the orthogonality and cross-orthogonality matrices employed in test-analysis mode-shape correlation. A hybrid TAM methodology is accordingly developed which combines the exact representation of the FEM target modes from the modal TAM with the more accurate TAM representation of the residual modes; the superior residual dynamics representation of the hybrid TAM is demonstrated for a detailed representation of a large space structure.

Kammer, D. C.↗
NASA NTRS1992

A second-order structural identification procedure via state space-based system identification

A theory is presented for transforming the system theory-based realization models into the corresponding physical coordinate-based structural models. The theory has been implemented into a computational procedure and applied to several example problems. The results show that the present transformation theory yields an objective model basis possessing a unique set of structural parameters from an infinite set of equivalent system realization models. For proportionally damped systems, the transformation directly and systematically yields the normal modes and modal damping. When non-proportional damping is present, the relative magnitude and phase of the damped model shapes are separately characterized, and a corrective transformation is then employed to capture the undamped normal modes and non-diagonal modal damping matrix.

Alvin, K. F.↗
NASA NTRS1991

Discrete piezoelectric sensors and actuators for active control of two-dimensional spacecraft components

This paper describes research into the use of discrete piezoelectric sensors and actuators for active modal control of flexible two-dimensional structures such as might be used as components for spacecraft. A dynamic coupling term is defined between the sensor/actuator and the structure in terms of structural model shapes, location and piezoelectric behavior. The relative size of the coupling term determines sensor/actuator placement. Results are shown for a clamped square plate and for a large antenna. An experiment was performed on a thin foot-square plate clamped on all sides. Sizable vibration control was achieved for first, second/third (degenerate) and fourth modes.

Bayer, Janice I.↗
NASA NTRS1991

Optical position measurement for a Large Gap Magnetic Suspension System

This paper describes the design of an optical position measurement system which is being built as part of the NASA Langley Large Gap Magnetic Suspension System (LGMSS). The LGMSS is a five degree-of-freedom, large-gap magnetic suspension system which is being built for Langley Research Center as part of the Advanced Controls Test Facility (ACTF). The LGMSS consists of a planar array of electromagnets which levitate and position a cylindrically shaped model containing a permanent magnet core. The optical position measurement system provides information on the location and orientation of the model to the LGMSS control system to stabilize levitation of the model.

Welch, Sharon S.↗
NASA NTRS1995

Viscous-flow analysis of a subsonic transport aircraft high-lift system and correlation with flight data

High-lift system aerodynamics has been gaining attention in recent years. In an effort to improve aircraft performance, comprehensive studies of multi-element airfoil systems are being undertaken in wind-tunnel and flight experiments. Recent developments in Computational Fluid Dynamics (CFD) offer a relatively inexpensive alternative for studying complex viscous flows by numerically solving the Navier-Stokes (N-S) equations. Current limitations in computer resources restrict practical high-lift N-S computations to two dimensions, but CFD predictions can yield tremendous insight into flow structure, interactions between airfoil elements, and effects of changes in airfoil geometry or free-stream conditions. These codes are very accurate when compared to strictly 2D data provided by wind-tunnel testing, as will be shown here. Yet, additional challenges must be faced in the analysis of a production aircraft wing section, such as that of the NASA Langley Transport Systems Research Vehicle (TSRV). A primary issue is the sweep theory used to correlate 2D predictions with 3D flight results, accounting for sweep, taper, and finite wing effects. Other computational issues addressed here include the effects of surface roughness of the geometry, cove shape modeling, grid topology, and transition specification. The sensitivity of the flow to changing free-stream conditions is investigated. In addition, the effects of Gurney flaps on the aerodynamic characteristics of the airfoil system are predicted.

Potter, R. C.↗
NASA NTRS1994

Bolt cutter functional evaluation

The Aerospace Corporation has been implementing finite difference and finite element codes for the analysis of a variety of explosive ordnance devices. Both MESA-2D and DYNA3D have been used to evaluate the role of several design parameters on the performance of a satellite separation system bolt cutter. Due to a lack of high strain rate response data for the materials involved, the properties for the bolt cutter and the bolt were selected to achieve agreement between computer simulation and observed characteristics of the recovered test hardware. The calculations provided insight into design parameters such as the cutter blade kinetic energy, the preload on the bolt, the relative position of the anvil, and the anvil shape. Modeling of the cutting process clarifies metallographic observation of both cut and uncut bolts obtained from several tests. Understanding the physical processes involved in bolt cutter operation may suggest certain design modifications that could improve performance margin without increasing environmental shock response levels.

S. Goldstein↗
NASA NTRS1996

Laboratory Measurement of the Temperature Dependence of Gaseous Sulfur Dioxide (SO2) Microwave Absorption with Application to the Venus Atmosphere

High-accuracy laboratory measurements of the temperature dependence of the opacity from gaseous sulfur dioxide (SO2) in a carbon dioxide (CO2) atmosphere at temperatures from 290 to 505 K and at pressures from 1 to 4 atm have been conducted at frequencies of 2.25 GHz (13.3 cm), 8.5 GHz (3.5 cm), and 21.7 GHz (1.4 cm). Based on these absorptivity measurements, a Ben-Reuven (BR) line shape model has been developed that provides a more accurate characterization of the microwave absorption of gaseous S02 in the Venus atmosphere as compared with other formalisms. The developed BR formalism is incorporated into a radiative transfer model. The resulting microwave emission spectrum of Venus is then used to set an upper limit on the disk-averaged abundance of gaseous S02 below the main cloud layer. It is found that gaseous S02 has an upper limit of 150 ppm, which compares well with previous spacecraft in situ measurements and Earth-based radio astronomical observations.

Suleiman, Shady H.↗
NASA NTRS1999

Evaluation of the Linear Aerospike SR-71 Experiment (LASRE) Oxygen Sensor

The Linear Aerospike SR-71 Experiment (LASRE) was a propulsion flight experiment for advanced space vehicles such as the X-33 and reusable launch vehicle. A linear aerospike rocket engine was integrated into a semi-span of an X-33-like lifting body shape (model), and carried on top of an SR-71 aircraft at NASA Dryden Flight Research Center. Because no flight data existed for aerospike nozzles, the primary objective of the LASRE flight experiment was to evaluate flight effects on the engine performance over a range of altitudes and Mach numbers. Because it contained a large quantity of energy in the form of fuel, oxidizer, hypergolics, and gases at very high pressures, the LASRE propulsion system posed a major hazard for fire or explosion. Therefore, a propulsion-hazard mitigation system was created for LASRE that included a nitrogen purge system. Oxygen sensors were a critical part of the nitrogen purge system because they measured purge operation and effectiveness. Because the available oxygen sensors were not designed for flight testing, a laboratory study investigated oxygen-sensor characteristics and accuracy over a range of altitudes and oxygen concentrations. Laboratory test data made it possible to properly calibrate the sensors for flight. Such data also provided a more accurate error prediction than the manufacturer's specification. This predictive accuracy increased confidence in the sensor output during critical phases of the flight. This paper presents the findings of this laboratory test.

Ennix, Kimberly A.↗
NASA NTRS1999

Evaluation of the Linear Aerospike SR-71 Experiment (LASRE) Oxygen Sensor

The Linear Aerospike SR-71 Experiment (LASRE) was a propulsion flight experiment for advanced space vehicles such as the X-33 and reusable launch vehicle. A linear aerospike rocket engine was integrated into a semi-span of an X-33-like lifting body shape (model), and carried on top of an SR-71 aircraft at NASA Dryden Flight Research Center. Because no flight data existed for aerospike nozzles, the primary objective of the LASRE flight experiment was to evaluate flight effects on the engine performance over a range of altitudes and Mach numbers. Because it contained a large quantity of energy in the form of fuel, oxidizer, hypergolics, and gases at very high pressures, the LASRE propulsion system posed a major hazard for fire or explosion. Therefore, a propulsion-hazard mitigation system was created for LASRE that included a nitrogen purge system. Oxygen sensors were a critical part of the nitrogen purge system because they measured purge operation and effectiveness. Because the available oxygen sensors were not designed for flight testing, a laboratory study investigated oxygen-sensor characteristics and accuracy over a range of altitudes and oxygen concentrations. Laboratory test data made it possible to properly calibrate the sensors for flight. Such data also provided a more accurate error prediction than the manufacturer's specification. This predictive accuracy increased confidence in the sensor output during critical phases of the flight. This paper presents the findings of this laboratory test.

Ennix, Kimberly A.↗
NASA NTRS2002

Wholly Aromatic Ether-imides. Potential Materials for n-Type Semiconductors

We report on the synthesis and characterization of a novel series low-molar-mass ether-imide rod-shaped model compounds. All ether-imides were obtained by terminating the appropriate rigid core dianhydride, i.e. pyromellitic dianhydride (PMDA), 1,4,5,8-naphthalenetetracarboxylic dianhydride (NDA), 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA), and 3,3,4,4'-oxydiphthalic dianhydride (ODPA) with three flexible aryl-ether tails of different chain length. The mono-functional aryl-ether amines, i.e. 4-(3-phenoxy-phenoxy)-phenylamine (2) and 4-(3-phenoxy-3-phenoxy-phenoxy)-phenylamine (4), were synthesized using standard fluoro-displacement and Ullmann condensation techniques. The corresponding ether-imide model compounds were obtained in high yields using a one-step solution imidization procedure. Increasing the number of meta-substituted aryl-ether units reduces the melt transition temperatures and at the same time it increases the solubility of the model compounds. Most model compounds are crystalline solids and form isotropic melts upon heating. 2,7-Bis-(-4-phenoxy-phenyl)-benzo[Imn][3,8]phenanthroline1,3,6,8-tetraone (NDA-n0), however, displays a smectic A (SA) when cooled from the isotropic phase, followed by what appears to be either a highly ordered smectic phase or a, columnar phase. This is the first example, known to date, in which a mesophase is detected in a wholly aromatic ether-imide compound. For all compounds we present spectroscopic data and X-ray diffraction data. Cyclic voltammetry was used to determine the redox behavior and pertinent energy levels of the model compounds.

Dingemans, Theo J.↗