Search NASA⌕ Search

SEARCH · Search NASA

Results for “single master”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Two-Dimensional Array Beam Scanning Via Externally and Mutually Injection Locked Coupled Oscillators

Some years ago, Stephan proposed an approach to one dimensional (linear) phased array beam steering which requires only a single phase shifter. This involves the use of a linear array of voltage-controlled electronic oscillators coupled to nearest neighbors. The oscillators are mutually injection locked by controlling their coupling and tuning appropriately. Stephan's approach consists of deriving two signals from a master oscillator, one signal phase shifted with respect to the other by means of a single phase shifter. These two signals are injected into the end oscillators of the array. The result is a linear phase progression across the oscillator array. Thus, if radiating elements are connected to each oscillator and spaced uniformly along a line, they will radiate a beam at an angle to that line determined by the phase gradient which is, in turn, determined by the phase difference between the injection signals.The beam direction is therefore controlled by adjusting this phase difference. Recently, Pogorzelski and York presented a formulation which facilitates theoretical analysis of the above beam steering technique. This was subsequently applied by Pogorzelski in analysis of two dimensional beam steering using perimeter detuning of a coupled oscillator array. The formulation is based on a continuum model in which the oscillator phases are represented by a continuous function satisfying a partial differential equation of diffusion type. This equation can be solved via the Laplace transform and the resulting solution exhibits the dynamic behavior of the array as the beam is steered. Stephan's beam steering technique can be similarly generalized to two-dimensional arrays in which the beam control signals are applied to the oscillators on the perimeter of the array. In this paper the continuum model for this two-dimensional case is developed and the dynamic solution for the corresponding aperture phase function is obtained. The corresponding behavior of the resulting far-zone radiation pattern is displayed as well.

Pogorzelski, Ronald J.↗

Resummation with Wilson lines off the light cone

I review the resummation formalism for organizing large logarithms in perturbative expansion of collinear subprocesses through the variation of Wilson lines off the light cone. A master equation is derived, which involves the evolution kernel resulting from this variation. It is then demonstrated that all the known single- and double-logarithm summations for a parton distribution function or a transverse-momentum-dependent parton distribution can be reproduced from the master equation by applying appropriate soft-gluon approximations to the evolution kernel. Moreover, jet substructures, information which is crucial for particle identification at the Large Hadron Collider and usually acquired from event generators, can also be calculated in this formalism.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonlinear quantum behavior of ultrashort-pulse optical parametric oscillators

The quantum features of ultrashort-pulse optical parametric oscillators (OPOs) are investigated theoretically in the nonlinear regime near and above threshold. Viewing the pulsed OPO as a multimode open quantum system, we rigorously derive a general input-output model that features nonlinear coupling among many cavity (i.e., system) signal modes and a broadband single-pass (i.e., reservoir) pump field. Under appropriate assumptions, our model produces a Lindblad master equation with multimode nonlinear Lindblad operators describing two-photon dissipation and a multimode four-wave-mixing Hamiltonian describing a broadband, dispersive optical cascade, which we show is required to preserve causality. To simplify the multimode complexity of the model, we employ a supermode decomposition to perform numerical simulations in the regime where the pulsed supermodes experience strong single-photon nonlinearity. We find that the quantum nonlinear dynamics induces pump depletion as well as corrections to the below-threshold squeezing spectrum predicted by linearized models. We also observe the formation of non-Gaussian states with Wigner-function negativity and show that the multimode interactions with the pump, both dissipative and dispersive, can act as effective decoherence channels. Finally, we briefly discuss some experimental considerations for potentially observing such quantum nonlinear phenomena with ultrashort-pulse OPOs on nonlinear nanophotonic platforms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Operation of a quantum dot in the finite-state machine mode: Single-electron dynamic memory

A single electron dynamic memory is designed based on the non-equilibrium dynamics of charge states in electrostatically defined metallic quantum dots. Using the orthodox theory for computing the transfer rates and a master equation, we model the dynamical response of devices consisting of a charge sensor coupled to either a single and or a double quantum dot subjected to a pulsed gate voltage. We show that transition rates between charge states in metallic quantum dots are characterized by an asymmetry that can be controlled by the gate voltage. This effect is more pronounced when the switching between charge states corresponds to a Markovian process involving electron transport through a chain of several quantum dots. By simulating the dynamics of electron transport we demonstrate that the quantum box operates as a finite-state machine that can be addressed by choosing suitable shapes and switching rates of the gate pulses. We further show that writing times in the ns range and retention memory times six orders of magnitude longer, in the ms range, can be achieved on the double quantum dot system using experimentally feasible parameters, thereby demonstrating that the device can operate as a dynamic single electron memory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fibre amplifier based on an ytterbium-doped active tapered fibre for the generation of megawatt peak power ultrashort optical pulses

We report a new ytterbium-doped active tapered fibre used in the output amplifier stage of a fibre laser system for the generation of megawatt peak power ultrashort pulses in the microjoule energy range. The tapered fibre is single-mode at its input end (core and cladding diameters of 10 and 80 μm) and multimode at its output end (diameters of 45 and 430 μm), but ultrashort pulses are amplified in a quasi-single-mode regime. Using a hybrid Er/Yb fibre system comprising an erbium master oscillator and amplifier at a wavelength near 1.5 μm, a nonlinear wavelength converter to the 1 μm range and a three-stage ytterbium-doped fibre amplifier, we obtained pulses of 1 μJ energy and 7 ps duration, which were then compressed by a grating-pair dispersion compressor with 60% efficiency to a 130 fs duration, approaching the transform-limited pulse duration. The present experimental data agree well with numerical simulation results for pulse amplification in the threestage amplifier. (extreme light fields and their applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Trajectory-independent speed limits for controlled open quantum systems

Existing quantum speed limits for controlled open quantum systems depend on the specified trajectory. For example, lower bounds on quantum annealing times in the presence of dissipation depend explicitly on the chosen annealing schedule. Recently, schedule-independent speed limits have been derived for annealing in the closed quantum system setting [L. P. García-Pintos et al ., SciPost Phys. 18 , 159 (2025)]. In this work, we generalize these results to open quantum systems, deriving schedule-independent lower bounds for quantum annealing times in systems described by a Lindblad master equation. We analyze the interplay between coherent control and dissipation in single- and two-qubit examples, demonstrating that the derived lower bounds capture key scaling behavior with respect to the strength of the dissipator. Finally, we apply the bound to thermal state preparation and show that the bound matches the expected asymptotic behavior for an Ising model in the high-temperature limit.

open quantum systems & decoherence↗

Tunable joint measurements in the dispersive regime of cavity QED

Joint measurements of multiple qubits open new possibilities for quantum information processing. Here we present an approach based on homodyne detection to realize such measurements in the dispersive regime of cavity or circuit QED. By changing details of the measurement, the readout can be tuned from extracting only single-qubit to extracting only multiqubit properties. We obtain a reduced stochastic master equation describing this measurement and its effect on the qubits. As an example, we present results showing parity measurements of two qubits. In this situation, measurement of an initially unentangled state can yield, with near unit probability, a state of significant concurrence.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synchronization with harmonics in an injected nuclear-magnetic-resonance laser

In injected lasers, only synchronization of the order 1/1 (when a frequency of laser oscillations becomes equal to the master laser frequency) is usually observed. Such locking appears due to single-photon transitions in a laser. We show that with the use of multiple-photon transitions a higher-order synchronization can arise. We present the results of numerical simulations and the preliminary experimental observations, which demonstrate that in the mercury NMR laser, with the use of triple-photon transitions, a frequency of locked laser oscillations becomes three times higher than the frequency of an external rf magnetic field. Such synchronization appears only in the case of a linearly polarized (oscillating) external magnetic field. For the circularly polarized (rotating) external field, only synchronization of the order 1/1 is possible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical synchronization system for femtosecond X-ray sources

Femtosecond pump/probe experiments using short X-Ray and optical pulses require precise synchronization between 100 meter-10 km separated lasers in a various experiments. For stabilization in the hundred femtosecond range a CW laser is amplitude modulated at 1-10 GHz, the signal retroreflected from the far end, and the relative phase used to correct the transit time with various implementations. For the sub-10 fsec range the laser frequency itself is upshifted 55 MHz with an acousto-optical modulator, retroreflected, upshifted again and phase compared at the sending end to a 110 MHz reference. Initial experiments indicate less than 1 fsec timing jitter. To lock lasers in the sub-10 fs range two single-frequency lasers separated by several teraHertz will be lock to a master modelocked fiber laser, transmit the two frequencies over fiber, and lock two comb lines of a slave laser to these frequencies, thus synchronizing the two modelocked laser envelopes.

47 OTHER INSTRUMENTATION↗

High throughput solar cell ablation system

A solar cell is formed using a solar cell ablation system. The ablation system includes a single laser source and several laser scanners. The laser scanners include a master laser scanner, with the rest of the laser scanners being slaved to the master laser scanner. A laser beam from the laser source is split into several laser beams, with the laser beams being scanned onto corresponding wafers using the laser scanners in accordance with one or more patterns. The laser beams may be scanned on the wafers using the same or different power levels of the laser source.

14 SOLAR ENERGY↗

High throughput solar cell ablation system

A solar cell is formed using a solar cell ablation system. The ablation system includes a single laser source and several laser scanners. The laser scanners include a master laser scanner, with the rest of the laser scanners being slaved to the master laser scanner. A laser beam from the laser source is split into several laser beams, with the laser beams being scanned onto corresponding wafers using the laser scanners in accordance with one or more patterns. The laser beams may be scanned on the wafers using the same or different power levels of the laser source.

14 SOLAR ENERGY↗

High throughput laser processing

A solar cell is formed using a solar cell ablation system. The ablation system includes a single laser source and several laser scanners. The laser scanners include a master laser scanner, with the rest of the laser scanners being slaved to the master laser scanner. A laser beam from the laser source is split into several laser beams, with the laser beams being scanned onto corresponding wafers using the laser scanners in accordance with one or more patterns. The laser beams may be scanned on the wafers using the same or different power levels of the laser source.

14 SOLAR ENERGY↗

Lab-on-Chip device with sub-10 nm nanochannels and plasmonic resonators for single molecule sensing applications

In this work, we implemented an innovative approach to the fabrication of a complete micro/nano fluidic system, based on direct nanoimprint lithography. A master silicon stamp with the multilevel structures is fabricated first, and then a negative replica is made, to be used as a stamp for ultraviolet nanoimprint lithography (UV-NIL). Afterwards, just one single UV-NIL step is necessary for patterning all the the micro and nanostructures. Furthermore, the devices are made of all-transparent materials, and the method allows flexibility for the type of substrates used.

36 MATERIALS SCIENCE↗

Tunable single-longitudinal-mode operation of an injection-locked TEA CO2 laser

The tunable single-longitudinal-mode operation of a TEA CO2 laser by an injection technique using a CW waveguide laser as the master oscillator is reported. With the experimental arrangement described, in which the waveguide laser frequency is tuned to correspond to one of the oscillating longitudinal modes of the TEA laser, single-longitudinal-mode operation was achieved with no apparent reduction in the TEA output energy, on various CO2 lines with frequency offsets from the line center as large as 300 MHz. The capability of this technique for high-resolution spectroscopy or atmospheric lidar studies is demonstrated by the recording of the absorption spectrum of a strong ozone line.

Megie, G.↗

The University of Texas catalog of ultraviolet and optical stellar data

The paper describes a plan to assemble a master catalog of early-type stars to at least 10th magnitude, containing a single value for each magnitude and the spectral type, with information on photometry, known peculiarities, duplicity, etc., which will serve as a collection of ground-based data to aid in the reduction and analysis of ultraviolet spectra obtained with the S-019 experiment on Skylab, in which objective prism photographs recorded nearly 10,000 stars at wavelengths shortward of 3000 A. The starting point is the Celescope Identification Catalog; several other catalogs will be compared and merged with this data base. The format for recording the wanted data on magnetic tape and the procedure for assembling the master file are discussed.

Parsons, S. B.↗

Storage of arbitrary two-charge-qubit states in a single {sup 87}Rb cold-atom ensemble

We propose a scheme for storing arbitrary states of two superconducting charge qubits in a single {sup 87}Rb cold-atom ensemble. The information of the two charge qubits is transferred sequentially into the single atomic ensemble, via a transmission line resonator serving as 'data bus'. We simulate the storage process by integrating the master equation that takes into account all kinds of decoherence mechanisms, and show that the mean storage fidelity is very high with the present experimental parameters. Moreover, the storage efficiency of the single ensemble in our scheme is double that of previous schemes. Finally, we also briefly discuss the possibilities and difficulties of extending it to multiqubit cases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Control strategies for a telerobot

One of the major issues impacting the utility of telerobotic systems for space is the development of effective control strategies. For near-term applications, telerobot control is likely to utilize teleoperation methodologies with integrated supervisory control capabilities to assist the operator. Two different approaches to telerobotic control are evaluated: bilateral force reflecting master controllers and proportional rate six degrees-of-freedom hand controllers. The controllers' performance of single manipulator arm tasks is compared. Simultaneous operation of both manipulator arms and complex multiaxis slave arm movements is investigated. Task times are significantly longer and fewer errors are committed with the hand controllers. The hand controllers are also rated significantly higher in cognitive and manual control workload on the two-arm task. The master controllers are rated significantly higher in physical workload. The implications of these findings for space teleoperations and higher levels of control are discussed.

Ohara, John↗

Eye-safe picosecond Raman laser

The results of development of a picosecond Nd :YAG laser with SBS and SRS pulse compression are presented. The laser emits single-frequency radiation (one longitudinal cavity mode of a passively Q-switched master oscillator) with a pulse energy of 5 mJ at a pulse duration of about 30 ps and a pulse repetition rate of 100 Hz. The output laser wavelength is 1530 nm. The laser beam quality is close to the diffraction limit (M{sup 2}⩽1.2). Thermally induced phase distortions introduced into the laser beam by the active elements of laser amplifiers are studied and a method of their compensation is proposed. Using this method, we have developed, fabricated, and successfully tested aspherical optical elements compensating for thermal aberrations of active elements, which has allowed us to decrease the beam divergence and increase the output energy. (lasers. active media)

42 ENGINEERING↗