Search NASA⌕ Search

SEARCH · Search NASA

Results for “single-crystal diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Machining-inducted residual strain and ductile-brittle transition in sapphire revealed by X-ray nanoprobe diffraction microscopy

Hard X-ray nanoprobe diffraction microscopy is employed to investigate machining-induced residual lattice strain in single-crystal sapphire following ultra-precision orthogonal plunge cutting. In this study, tilt-series and single-angle acquisition strategies are systematically compared to evaluate their capability for resolving lattice variations associated with the machining process. An analytical framework is developed to enable the efficient and reliable extraction of strains, which serve as strain-based indicators of changes in the dominant deformation mechanism. The measured high-dimensional strain exhibits spatial heterogeneity and systematic evolution along the cutting path, consistent with deformation-regime changes from ductile response to crack-prone behavior.

Liang, Rui↗

Competing magnetic phases in Cr 3+𝛿 ⁢Te 4 are spatially segregated

Cr 1+𝑥⁢ Te 2 is a self-intercalated van der Waals system that is of current interest for its room-temperature room-temperature ferromagnetic (FM) phases and tunable topological properties. In bulk samples, the strain from the interstitial Cr ions leads to distinct structural phases for different ranges of 𝑥. Early neutron powder diffraction (NPD) measurements on the monoclinic phase Cr 3 ⁢Te 4 (𝑥=0.5) presented evidence for competing FM and antiferromagnetic (AFM) phases. Here we apply neutron diffraction to a single crystal of Cr 3+𝛿 ⁢Te 4 with 𝛿=−0.10 and discover that it consists of two distinct monoclinic phases, one with FM order below 𝑇 C ≈321 K and another that develops AFM order below 𝑇 N ≈86 K. In contrast, we find that a crystal with 𝛿=−0.26 exhibits only FM order below 𝑇 C ≈285 K. The single-crystal analysis is complemented by results obtained with NPD, x-ray powder diffraction, and transmission electron microscopy (TEM) measurements on the 𝛿=−0.10 composition. From observations of spontaneous magnetostriction of opposite sign at 𝑇 C and 𝑇 N , along with the TEM evidence for both monoclinic phases in a single thin ( ≈100 nm) grain, we conclude that the two phases must have a fine-grained ( ≲100 nm) intergrowth character, as might occur from high-temperature spinodal decomposition during the growth process. Calculations of the relaxed lattice structures for the FM and AFM phases with density functional theory provide a rationalization of the observed spontaneous magnetostrictions. Correlations between the magnitude and orientation of the magnetic moments with lattice parameter variation demonstrate that the magnetic orders are sensitive to strain, thus explaining why magnetic ordering temperatures and anisotropies can be different between bulk and thin-film samples, when the latter are subject to epitaxial strain. Our results point to the need to investigate the supposed coexistence FM and AFM phases reported elsewhere in the Cr 1+𝑥 ⁢Te 2 system, such as in the Cr 5 ⁢Te 8 phase (𝑥=0.25).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrafast-induced coherent acoustic phonons in the two-dimensional magnet CrSBr

Magnetism in two-dimensional (2D) van der Waals (vdW) crystals offers promising new directions for low-dimensional physics and devices. In this work, mega-electron volt (MeV) ultrafast electron diffraction was employed to investigate the ultrafast atomic dynamics of a novel, 2D vdW magnetic single-crystal CrSBr. Femtosecond (fs) optical pump pulses excited non-equilibrium atomic displacements shown to be coherent acoustic phonons (CAPs). Phonon frequencies were extracted by analyzing oscillations of different Bragg peak (BP) intensities and were determined to be GHz acoustic disturbances that propagated as strain waves. Phonon modes exhibit anisotropy with respect to the a and b crystal axes. Subharmonic phonon frequencies were also observed, and this provided a signature of nonlinear oscillatory coupling between the laser-induced pumping phonon frequency and secondary phonon frequencies. Thus, CrSBr was found to serve as a nonlinear phononic frequency converter. The ultrafast time dependence of the Bragg intensity was simulated by incorporating an oscillating deviation parameter ansatz into expressions for the dynamical scattering intensity yielded excellent modeling of the ultrafast structural dynamics of the photo-excited 2D crystal. Our work provides a foundation for exploring how fs light pulses can influence phonon dynamics in materials with strong spin-lattice coupling. These results suggest that CAPs can match the magnon frequencies and show the promise of CrSBr for use in optical-to-microwave transducers and phononic devices.

43 PARTICLE ACCELERATORS↗

Reuniting crystallography with real space: Ab initio structure elucidation with 4D-STEM

Structure elucidation via single-crystal methods has historically lacked experimental access to real-space information, instead relying exclusively on diffraction-space measurements of Bragg reflections. Here we exploit the dual-space imaging power of 4D scanning transmission electron microscopy to meaningfully integrate real-space information into the crystallographic workflow. We show that virtual apertures assembled by segmentation of high-angle annular dark-field images enable i) pixel-by-pixel separation of coherent Bragg signal from clusters of closely spaced nanocrystals and ii) selective extraction of integrated intensities from thinner subregions of individual specimens, facilitating retroactive tuning of multiple scattering artifacts. This strategy empowers us to simply pick and choose whichever nanoscale regions of interest generate the highest-quality diffraction patterns, allowing us to solve several independent structures of the metal-organic framework UiO-66 from specimens whose agglomerated morphology proved intractable for conventional microcrystal electron diffraction. Our method is compatible with both rotational and serial approaches to data processing, ultimately divulging the first scanning nanobeam electron diffraction structures determined by direct methods at subangstrom resolution.

Saha, Ambarneil↗

Intralattice-bonded phase-engineered ultrahigh-Ni single-crystalline cathodes suppress strain evolution

Single crystallization remains a debated strategy for advancing Ni-rich cathode materials. While it mitigates particle cracking and improves tap density by eliminating particle boundaries, extended diffusion pathways introduce volumetric and lattice distortions, compromising electrochemical and structural stability. These challenges hinder the commercialization of high-Ni single-crystal cathodes, calling for a reassessment of their viability. Here, in this study, we report a structural design: intralattice-bonded phase single-crystal LiNi 0.92 Co 0.03 Mn 0.05 O 2 (IBP-SC92). This architecture maintains structural integrity while shortening diffusion pathways, resulting in almost zero electrochemical degradation during cycling. The robust structure and fast ion transport mitigate lattice strain, as confirmed by multiscale high-resolution diffraction and imaging techniques, preventing intragranular cracks and irreversible phase transitions. As a result, IBP-SC92 shows outstanding cycling stability, with nearly 100% capacity retention after 100 cycles in half cells and 94.5% retention after 1,000 cycles in full cells. This redefined single-crystal cathode represents a significant step towards the industrial adoption of high-energy-density materials.

36 MATERIALS SCIENCE↗

Genetic algorithm-based geometry calibration for dynamic compression x-ray diffraction experiments

An important component of dynamic compression x-ray diffraction (XRD) experiment analysis is geometry calibration: proper data interpretation requires knowledge of the precise detector position and orientation and, if the experiment involves a single-crystal sample, knowledge of the lattice orientation. The determination of these parameters in the arbitrary three-dimensional (3D) scattering geometries often present in dynamic compression facilities is challenging, as the associated optimization problem can be highly nonlinear, nonsmooth, and discontinuous. We present a genetic algorithm-based approach for performing dynamic compression XRD calibrations that overcomes these obstacles. We provide details regarding the image processing, algorithm implementation, and open-source software deployment and demonstrate the capability of the approach to calibrate the detector and crystal parameters in 3D geometries. Notably, we demonstrate the solver’s capacity to find the crystal orientation without a priori rotation constraints.

Brown, Nathan P. [Sandia National Laboratories (SN↗

Observation of spin‑wave altermagnetic splitting in MnF2

-Contents of the Data Repository: - Polarized neutron diffraction data acquired in the (HK0) scattering plane. - Inelastic neutron scattering (INS) data from both unpolarized and polarized measurements with an incident neutron energy of Ei =9 meV.- - Reduced multidimensional single-crystal datasets (MDE) and corresponding S(Q,ω) slices used to generate all figures presented in the manuscript. - Julia source code and supporting input files used for spin-wave calculations, model fitting, and simulation of neutron scattering intensity maps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A machine-learning approach to measure 3D sample properties from 2D Transmission Electron Microscopy images

Transmission Electron Microscopy (TEM) is a powerful tool for the characterization of materials at the nanoscale; however, its inherent two-dimensional (2D) nature poses significant challenges to accurately measure three-dimensional (3D) properties. We introduce a supervised machine-learning model that predicts 3D structural information, such as sample thickness and curvature, from a series of conventional 2D TEM images. The model, a U-Net convolutional neural network, is trained on a large synthetic dataset generated from dynamical diffraction simulations that model TEM’s complex, nonlinear image formation, accounting for sample thickness and curvature. This physically realistic framework enables exploration of a broad parameter space impractical to sample experimentally. We demonstrate that the trained model has accurate predictions for experimental single-crystal silicon samples, achieving performance comparable to established measurement techniques. This work highlights the critical role of robust, simulation-based training in overcoming the limitations of real-world imaging artifacts and inconsistent sample geometries. By integrating machine learning with numerical simulations, we offer an efficient and scalable framework for quantitative TEM analysis, paving the way for more sophisticated 3D characterization of complex materials.

Dynamical diffraction↗

Cold-Sprayed NMC622 Composite as a Cathode for Lithium-Ion Batteries

The growing demand for high-energy, low-cost lithium-ion batteries (LIBs) to power electric vehicles (EVs) necessitates advances in both materials and manufacturing processes. Conventional cathode fabrication methods, such as slurry casting and drying, are energy-intensive and pose challenges for scalability and environmental compliance. In this study, we propose cold-spray (CS) deposition as a solvent-free approach for fabricating LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) composite cathodes. Powder blends of NMC622, poly(vinylidene fluoride) (PVDF), and carbon black (CB) are directly deposited onto stainless steel and Inconel substrates under varied gas temperatures, pressures (and thus velocities), and standoff distances. The effects of temperature on the deposit morphology, coating density, and volume are systematically investigated. Computational fluid dynamics simulations reveal that increasing the gas temperature enhances the particle velocity, narrows the spray angle, and reduces the mass concentration radially at the nozzle outlet. CS deposition results in a dense cathode microstructure, accompanied by fracture in polycrystalline NMC622 particles. X-ray diffraction analysis further verifies that there are no phase changes during the deposition process. The electrochemical performance of the cold-sprayed cathodes reveals an initial capacity of approximately 96 mAh g –1 for single-crystal NMC622 and 167 mAh g –1 for polycrystalline NMC622. While these values are modest compared to state-of-the-art slurry-cast cathodes, which typically exhibit 180–200 mAh g –1 under optimized conditions. The results demonstrate a competitive performance given the solvent-free nature of the CS process and compare favorably with tape-cast samples made from identical feedstock. In conclusion, he CS process enables the formation of dense, binder-integrated cathode coatings without the need for solvent processing, offering a promising pathway for scalable, energy-efficient dry electrode manufacturing of next-generation LIBs.

Batteries↗

The structures of mcgovernite and carlfrancisite reconsidered: static disorder or ordered defects and twinning?

Here, the minerals mcgovernite and carlfrancisite possess an extraordinary rhombohedral unit cell [mcgovernite: a = b = 8.206 Å and c = 204.118 Å, with the complex formula unit M 2+ 19 Zn 3 (OH) 21 (AsO 3 )(AsO 4 ) 3 (SiO 4 ) 3 (M = Mn, Mg, Zn); carlfrancisite similar]. Hawthorne [(2018), Mineral. Mag. 82, 1101–1118] reported a single-crystal study using a centrosymmetric model ($R\bar{3}c$) containing disorder on three cationic sites and an AsIII lone-pair site for both mcgovernite and carlfrancisite. A solution of the structure of mcgovernite from high-resolution synchrotron powder diffraction data suggests a reinterpretation of the crystal structures of mcgovernite and carlfrancisite as noncentrosymmetric R3c with ordered planar defects which allows for merohedral twinning.

carlfrancisite↗

High-pressure neutron diffraction at ultra-low temperature

Neutron diffraction is a powerful tool in the study of quantum materials and associated emergent phenomena as it allows for direct detection of magnetic structure even at ultra-low temperatures. As pressure can drive systems across quantum critical points and tune emergent behaviors at the quantum scale, coupling neutron diffraction with extreme conditions of high pressure at (ultra-)low temperatures has been a key research target over decades. This has proven challenging as magnetic neutron diffraction typically requires large sample volumes due to flux limitations, whereas high-pressure studies require small sample volumes due to pressure limitations. Combining these two contradictory requirements poses many difficulties, but also brings opportunities in research and development. Here, we address these shortcomings through the use of a diamond anvil cell equipped with polycrystalline anvils with relatively large sample volumes coupled with the high neutron flux made available by the high-pressure diffractometer of the Spallation Neutron Source. This particular diamond anvil cell configuration has previously proven useful for single-crystal samples and is here coupled with the ultra-low temperatures of a dilution refrigerator for the first time. Our study on a single crystal of Yb 2 ⁢O 3 successfully collected magnetic neutron diffraction data at 5.3 GPa below 200 mK inside a dilution refrigerator. We have performed a detailed analysis of the magnetic diffraction data to investigate the magnetic structure under pressure and observed a subtle shift in the transition temperature. This development will open the door for future studies on magnetic materials with these much-desired coupled extremes of high pressure and ultra-low temperatures.

Wu, Yan [Oak Ridge National Laboratory (ORNL), Oak↗

Bridging Experiment and Theory to Reveal Compounds in K–Zn(Cd)–Bi Systems

This study investigates the facile hydride synthesis method guided by theoretical predictions to explore the K–T–Bi (T = Zn, Cd) phase spaces. Using an adaptive genetic algorithm (AGA) and density functional theory (DFT), candidate compositions are identified for experimental validation via a facile hydrides route, permitting experimental screening of K–Zn–Bi and “empty” K–Cd–Bi systems. The previously reported KZnBi and KZn 2 Bi 2 are synthesized alongside newly discovered KCdBi and KCd 2 Bi 2 . While the AGA and DFT predict the stability of these compounds, structural predictions align with the experiment only for KZnBi and KZn 2 Bi 2 . Single-crystal X-ray structure refinements confirm that KZnBi and KZn 2 Bi 2 adopt the hexagonal ZrBeSi- and tetragonal ThCr 2 Si 2 -structure types, respectively. KCdBi has tetragonal PbClF-structure type and KCd 2 Bi 2 belongs to the ThCr 2 Si 2 -structure type. A trend based on the ratio of the metal ionic radii allows to rationalize variation in the structure types within the ATBi family (A = Li–Cs), correctly identifying KCdBi as isostructural to NaZnBi. Thermal stability studied by high-temperature powder X-ray diffraction reveals that Zn-containing compounds melt at higher temperatures (821 K for KZn 2 Bi 2 ) than Cd-containing KCd 2 Bi 2 (635 K). This study highlights the efficacy of combining rapid synthesis techniques with predictive modeling, though structural predictions show some limitations in accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Electronic Behavior of f-Element Intermetallics

Due to their partially filled f-orbitals, lanthanide and actinide intermetallic materials exhibit intriguing electronic, structural, and magnetic properties. These materials provide a unique platform to explore exotic magnetic and quantum phenomena that arise from their strongly correlated f-electrons, offering insights into f-electron behavior. Incorporating light elements such as boron and carbon can significantly impact the electronic, chemical, and physical properties of these materials, with varying influence between lanthanides and actinides due to the more localized f-electrons in lanthanides. In this work, lanthanide-based intermetallic single crystals containing light atoms were synthesized using the molten metal flux growth method. In this method, one or more low-melting metals such as aluminum, gallium, tin, and bismuth are used in excess as the reaction medium. This solution-state approach allows for lower reaction temperatures compared to solid-state reactions and enables the isolation of kinetic products rather than thermodynamically stable compounds. The synthesized crystals were analyzed using an extensive array of analytical and computational characterization techniques, including single crystal X-ray diffraction, scanning electron microscopy, energy-dispersive spectroscopy, magnetization measurements, and density functional theory calculations. These analyses provided detailed insights into the structural and magnetic properties of the synthesized materials.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗

Quadratic magnetoresistance across the insulator–metal transition in V4O7 thin films

We present a comparative magnetotransport study of V4O7 thin films grown simultaneously on single-crystal Al2O3 (r-cut) and amorphous SiO2 substrates, to examine substrate-induced effects on electronic transport across the insulator–metal transition (IMT). Temperature-dependent resistivity reveals a broad electronic ordering regime below the IMT, with both films exhibiting similar transition temperatures but differing by nearly an order of magnitude in absolute resistivity. Despite this strong substrate dependence of the resistivity scale, the magnetoresistance remains predominantly quadratic in magnetic field over wide temperature intervals for both substrates. Analysis of the quadratic magnetoresistance defines an effective mobility scale that evolves systematically across the IMT and exhibits a similar temperature dependence for the two films. Structural characterization, including atomic-resolution scanning transmission electron microscopy of the V4O7/Al2O3 interface and azimuthal X-ray diffraction measurements, reveals a sharp interface and well-defined in-plane crystallographic registry for the r-cut film, in contrast to the rotationally averaged in-plane structure expected for films grown on amorphous SiO2. These results indicate that while substrate-controlled structural registry modifies the resistivity scale, the quadratic magnetotransport response across the IMT remains largely robust, providing a consistent diagnostic of electronic transport in V4O7 thin films.

25 ENERGY STORAGE↗

Thermal expansion of LaB 6 from 298 to 998 K

We propose LaB 6 as a temperature calibration standard for high-temperature (HT) X-ray diffractometry owing to its high temperature stability. Such HT applications require a reliable HT lattice parameter or, equivalently, peak position data, which have not been readily accessible to the diffraction community to date. As such, the thermal expansion behavior of NIST SRM 660a LaB6 was assessed in the temperature range 298–998 K using HT Bragg–Brentano parafocusing θ:θ X-ray diffractometry in conjunction with Rietveld analysis. Data were collected in the 2θ range 20–150° at a data collection rate of 0.5° θ min −1 in air and at 1 atm. The temperature was stepped in 50 K increments. The cubic unit-cell lattice parameter [a(T)] of LaB 6 in Å was found to vary as a(T) = 4.15678 (±0.00001) + Ξ(T − 298 K) + Ψ(T − 298 K) 2 , where Ξ = 2.4645 × 10 −5 (±4.8904 × 10 −8 ) Å K −1 and Ψ = 1.0325 × 10 −8 (±6.7376 × 10 −11 ) Å K −1 . The isobaric volume thermal expansion coefficient (TEC) was obtained as α V P = (5.9291 × 10 −6 ) + (4.9680 × 10 −9 )(T − 298 K) K −1 , from which the corresponding linear TEC was obtained as α L P = (1.9764 × 10 −6 ) + (1.6560 × 10 −9 )(T − 298 K) K −1 . The 3 × 3 matrix representations of the single-crystal isobaric linear TEC and the volume expansivity were obtained for the cubic crystal class to which LaB 6 belongs. Also, the temperature dependence of the lattice parameter data of this study was compared with past landmark studies on LaB 6 by Dutchak et al. [Inorg. Mater. (1972), 8, 1877–1880] and Aivazov et al. [Inorg. Mater. (1979), 15, 1015–1016].

LaB6 standard material↗

Incident beam optics optimization for the single crystal neutron diffractometer Pioneer with a polarized beam option

Pioneer, a next-generation single-crystal neutron diffractometer, is under development for Oak Ridge National Laboratory’s Second Target Station. Designed to address a wide range of scientific questions, Pioneer will deliver homogeneous neutron beams with customizable size and divergence and provide a polarized beam option. This article introduces its incident beam optics, highlighting the optimization methodology and the simulated performance. Pioneer will utilize a modified elliptical-straight guide for neutron transport and deploy slit packages and insertable apertures to control beam size and divergence. The optimized guide geometry matches the optimal-and-full-sample-illumination condition, and the beam control system effectively filters out unwanted neutrons while preserving the desired ones. In addition, we have found that polygon-approximated guides provide satisfactory transport efficiency and beam homogeneity, eliminating the need for truly curved guides. Further, to enhance neutronics performance and reduce cost, the coatings of supermirror elements are individually optimized to the lowest half-integer m-values that are sufficient to deliver the desired neutrons. After evaluating polarizing V-cavities and 3 He spin filters over the default polarized wavelength band of 1.2–5.5 Å, we selected a translatable multichannel polarizing V-cavity as the incident beam polarizer. Strategically placed at a location where the beam divergence is low and a large in-guide gap has negligible impact on transport efficiency, the optimized V-cavity achieves an average P 2 T of ~35%.

47 OTHER INSTRUMENTATION↗

Epitaxial Electrodeposition of Fe with Controlled In-Plane Variants for a Reversible Metal Anode in an Aqueous Electrolyte

The development of reversible metal anodes is a key challenge for advancing aqueous battery technologies, particularly for scalable and safe stationary energy storage applications. Here, in this study, we demonstrate a strategy to realize epitaxial electrodeposition of iron (Fe) on single-crystal copper (Cu) substrates in aqueous electrolytes. We compare the electrodeposition behavior of Fe on polycrystalline and single-crystalline Cu substrates, revealing that the latter enables highly uniform, dense, and crystallographically aligned Fe growth. Comprehensive electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) analysis confirms the formation of Fe with specific out-of-plane and in-plane orientations, including well-defined rotational variants. Our findings highlight that epitaxial electrodeposition of Fe can suppress dendritic growth and significantly enhance Coulombic efficiency during plating/stripping cycles. This approach bridges fundamental crystallography with practical electrochemical performance, providing a pathway toward high-efficiency aqueous batteries utilizing Earth-abundant materials.

aqueous battery↗

Computing virtual dark-field X-ray microscopy images of complex discrete dislocation structures from large-scale molecular dynamics simulations

Dark-field X-ray microscopy (DFXM) is a novel diffraction-based imaging technique that non-destructively maps the local deformation from crystalline defects in bulk materials. While studies have demonstrated that DFXM can spatially map 3D defect geometries, it is still challenging to interpret DFXM images of the high-dislocation-density systems relevant to macroscopic crystal plasticity. This work develops a scalable forward model to calculate virtual DFXM images for complex discrete dislocation structure(s) (DDS) obtained from atomistic simulations. Our new DDS-DFXM model integrates a non-singular formulation for calculating the local strain from the DDS and an efficient geometrical optics algorithm for computing the DFXM image from the strain field. We apply the model to complex DDS obtained from a large-scale mol­ecular dynamics simulation of compressive loading on single-crystal silicon. Simulated DFXM images exhibit prominent contrast for dislocation features between the multiple slip systems, demonstrating the potential of DFXM to resolve features from dislocation multiplication. In conclusion, the integrated DDS-DFXM model provides a toolbox for DFXM experimental design and image interpretation in the context of bulk crystal plasticity for a range of measurements across shock plasticity and the broader materials science community.

X-ray imaging↗