Search NASASearch

SEARCH · Search NASA

Results for “sparse data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Sensitivity of wind analyses to barotropic energetics during summer

Three analysis schemes - the extended correction method of the University of Hawaii at Manoa (UHM), the National Meteorological Center (NMC) Hough analysis, and Sadler's subjective stream analysis (SUB) - were used to obtain grid-point winds using data for a five-day period in late summer, and barotropic energetics computations obtained using the three schemes for six limited regions in the Pacific and Indian Oceans were compared. Few differences were observed between UHM and NMC stream-function analyses, but significant differences were found in the wind fields and energetics obtained using the subjective method and the two objective methods in data-sparse regions. Major features in the local barotropic criteria field were found to be less sensitive to the analysis scheme used.

Sumi, A.

The state of the atmosphere as inferred from the FGGE satellite observing systems during SOP-1

The statistical properties, and coverage, of satellite temperature sounding data are described. Tropical regions are observed every two days, extratropics from one to four times a day. Oceans are covered two to three times a day. Asynoptic coverage is comparable to the U.S. rawinsonde network twice daily coverage. Lack of ground truth for data sparse areas makes accuracy difficult to assess. The rms differences of layer mean temperatures obtained from collocating rawinsonde observations with satellite temperature profiles in space and time differ from rms differences of layer mean satellite temperature soundings. The FGGE satellite systems can infer the three dimensional motion field and improve the representation of the large scale state of the atmosphere.

Halem, M.

Optimal interpolation and the Kalman filter

The estimation theory of stochastic-dynamic systems is described and used in a numerical study of optimal interpolation. The general form of data assimilation methods is reviewed. The Kalman-Bucy, KB filter, and optimal interpolation (OI) filters are examined for effectiveness in performance as gain matrices using a one-dimensional form of the shallow-water equations. Control runs in the numerical analyses were performed for a ten-day forecast in concert with the OI method. The effects of optimality, initialization, and assimilation were studied. It was found that correct initialization is necessary in order to localize errors, especially near boundary points. Also, the use of small forecast error growth rates over data-sparse areas was determined to offset inaccurate modeling of correlation functions near boundaries.

Cohn, S.

Megaregolith thickness, heat flow, and the bulk composition of the Moon

Models developed to assess the effects of megaregolith on lunar thermal evolution are discussed. It is confirmed that the two sites where lunar heat flow was measured are probably unrepresentative, with heat flows about 25% higher than regional averages, due to focussing of heat flow towards regions with thin megaregolith. Numerous lines of evidence indicate that the megaregolith is generally 2 to 3 km thick under highlands (which cover about 83% of the total lunar surface), and 1 km thick under maria. In most models, megaregolith thickness is assumed to be roughly 6x greater over highlands than over maria. Based on sparse data for porosity among lunar rock types, and the correlation between thermal conductivity and porosity, it is assumed that megaregolith conductivity is roughly 20 kiloerg s(-1)cm(-1)K(-1), and bedrock conductivity is roughly 7x greater. It is also found that insulation by megaregolith exacerbates the problem of reconciling modest temperatures inferred for the (present) matle with a high rate of heat production; an upper limit of 30 ng/g for the bulk-Moon U content can be derived from this constraint alone.

Warren, P. H.

Megaregolith thickness, heat flow, and the bulk composition of the moon

Models developed to assess the effects of megaregolith on lunar thermal evolution are discussed. It is confirmed that the two sites where lunar heat flow was measured are probably unrepresentative, with heat flows about 25 percent higher than regional averages, due to focussing of heat flow towards regions with thin megaregolith. Numerous lines of evidence indicate that the megaregolith is generally 2 to 3 km thick under highlands (which cover about 83 percent of the total lunar surface), and 1 km thick under maria. In most models, megaregolith thickness is assumed to be roughly 6x greater over highlands than over maria. Based on sparse data for porosity among lunar rock types, and the correlation between thermal conductivity and porosity, it is assumed that megaregolith conductivity is roughly 20 kiloerg s(-1)cm(-1)K(-1), and bedrock conductivity is roughly 7x greater. It is also found that insulation by megaregolith exacerbates the problem of reconciling modest temperatures inferred for the (present) mantle with a high rate of heat production; an upper limit of 30 ng/g for the bulk-Moon U content can be derived from this constraint alone.

Rasmussen, K. L.

Atmospheric water distribution in a midlatitude cyclone observed by the Seasat Scanning Multichannel Microwave Radiometer

Patterns in the horizontal distribution of integrated water vapor, integrated liquid water and rainfall rate derived from the Seasat Scanning Multichannel Microwave Radiometer (SMMR) during a September 10-12, 1978 North Pacific cyclone are studied. These patterns are compared with surface analyses, ship reports, radiosonde data, and GOES-West infrared satellite imagery. The SMMR data give a unique view of the large mesoscale structure of a midlatitude cyclone. The water vapor distribution is found to have characteristic patterns related to the location of the surface fronts throughout the development of the cyclone. An example is given to illustrate that SMMR data could significantly improve frontal analysis over data-sparse oceanic regions. The distribution of integrated liquid water agrees qualitatively well with corresponding cloud patterns in satellite imagery and appears to provide a means to distinguish where liquid water clouds exist under a cirrus shield. Ship reports of rainfall intensity agree qualitatively very well with SMMR-derived rainrates. Areas of mesoscale rainfall, on the order of 50 km x 50 km or greater are detected using SMMR derived rainrates.

Mcmurdie, L. A.

Tropical Pacific moisture variability

Research objectives are to: (1) describe the synoptic scale variability of moisture over the tropical Pacific Ocean; (2) describe the systems leading to this variability; and (3) develop and implement satellite analysis procedures to facilitate (1) and (2) over the data sparse Pacific.

Mcguirk, James P.

The role of topography in geodetic gravity field modelling

Masses associated with the topography, bathymetry, and its isostatic compensation are a dominant source of gravity field variations, especially at shorter wavelengths. On global scales the topographic/isostatic effects are also significant, except for the lowest harmonics. In practice, though, global effects need not be taken into account as such effects are included in the coefficients of the geopotential reference fields. On local scales, the short-wavelength gravity variations due to the topography may, in rugged terrain, be an order of magnitude larger than other effects. In such cases, explicit or implicit terrain reduction procedures are mandatory in order to obtain good prediction results. Such effects may be computed by space-domain integration or by fast Fourier transformation (FFT) methods. Numerical examples are given for areas of the Canadian Rockies. In principle, good knowledge of the topographic densities is required to produce the smoothest residual field. Densities may be determined from sample measurements or by gravimetric means, but both are somewhat troublesome methods in practice. The use of a standard density, e.g., 2.67 g/cu cm, may often yield satisfactory results and may be put within a consistent theoretical framework. The independence of density assumptions is the key point of the classical Molodensky approach to the geodetic boundary value problem. The Molodensky solutions take into account that land gravity field observations are done on a non-level surface. Molodensky's problem may be solved by integral expansions or more effective FFT methods, but the solution should not be intermixed with the use of terrain reductions. The methods are actually complimentary and may both be required in order to obtain the smoothest possible signal, least prone to aliasing and other effects coming from sparse data coverage, typical of rugged topography.

Forsberg, R.

Lanczos eigensolution method for high-performance computers

The theory, computational analysis, and applications are presented of a Lanczos algorithm on high performance computers. The computationally intensive steps of the algorithm are identified as: the matrix factorization, the forward/backward equation solution, and the matrix vector multiples. These computational steps are optimized to exploit the vector and parallel capabilities of high performance computers. The savings in computational time from applying optimization techniques such as: variable band and sparse data storage and access, loop unrolling, use of local memory, and compiler directives are presented. Two large scale structural analysis applications are described: the buckling of a composite blade stiffened panel with a cutout, and the vibration analysis of a high speed civil transport. The sequential computational time for the panel problem executed on a CONVEX computer of 181.6 seconds was decreased to 14.1 seconds with the optimized vector algorithm. The best computational time of 23 seconds for the transport problem with 17,000 degs of freedom was on the the Cray-YMP using an average of 3.63 processors.

Bostic, Susan W.

Laser velocimetry measurements in non-isothermal CVD systems

Researchers at the NASA Langley Research Center are applying laser velocimetry (LV) techniques to characterize the fluid dynamics of non-isothermal flows inside fused silica chambers designed for chemical vapor deposition (CVD). Experimental issues involved in the application of LV techniques to this task include thermophoretic effects on the LV seed particles, seeding the hazardous gases, index of refraction gradients in the flow field and surrounding media, optical access, relatively low flow velocities, and analysis and presentation of sparse data. An overview of the practical difficulties these issues represent to the use of laser velocimetry instrumentation for CVD applications is given. A fundamental limitation on the application of LV techniques in non-isothermal systems is addressed which involves a measurement bias due to the presence of thermal gradients. This bias results from thermophoretic effects which cause seed particle trajectories to deviate from gas streamlines. Data from a research CVD reactor are presented which indicate that current models for the interaction of forces such as Stokes drag, inertia, gravity, and thermophoresis are not adequate to predict thermophoretic effects on particle-based velocimetry measurements in arbitrary flow configurations.

Johnson, E. J.

Modelling TOVS radiances of synoptic systems

Two operational analysis models, produced by ECMWF and NMC, are compared against observed satellite radiances by converting the analyzed variables into synthetic radiances using a radiative transfer model (RTM). Observed TOVS satellite radiances are used as a ground truth, since they are the only source of continuous, synoptic-scale resolution observations available over the data-sparse tropical Pacific Ocean. It is assumed that if the analysis models correctly simulate atmospheric conditions, the observed and modelled radiance fields will have similar patterns and magnitudes. In each of seven TOVS channels examined, the mean temperature difference between the models was small, but the differences between the models and the observations were large. The mean temperature difference within each channel was larger than the standard deviation in most cases. The moisture channels of the RTM were sensitive to changes in moisture content, but none of the channels were significantly affected by changes in temperature. Single-day modelled radiance analyses contain synoptic information similar to the satellite observations. ECMWF is often too noisy, producing features not verified by the satellite; NMC is often too smooth. NMC more closely resembles the TOVS contours. Modelled water vapor channel analyses resemble observed monthly and composited observations well, but do not accurately reproduce the highly-variable single-day fields. ECMWF generally has more accurate gradients. Neither model simulates the tropics well. The water vapor channels, especially channel eleven (weighted at 700 mb), most closely resembled the tropical plume composite described by McGuirk and Ulsh. The only plume evidence found in the thermal or microwave channels, in either the observations or the models, was a composite trough situated in the correct location, extending from the mid-latitudes into the subtropics. This feature was not readily discernable until the definition and mature stages. Additional information besides the modelled temperatures would be required to produce an accurate forecast for the tropics. Model patterns more closely resembled the observations in the quiescent atmosphere, though the magnitudes were not any closer. ECMWF simulates the TOVS quiescent state better than NMC. The moisture channels continue to present the most realistic patterns. The models contained more detail in the tropics than was verified by the satellite observations, apparently trying to force an active ITCZ. Lag correlations showed TOVS to be more persistent than the models. TOVS also showed a smoother lag trend, but all products appeared to have adequate ability to react to changes in the atmosphere over time.

Coe, Thomas Eddy

Extending model-based diagnosis for analog thermodynamical devices

The increasing complexity of process control applications have posed difficult problems in fault detection, isolation, and recovery. Deep knowledge-based approaches, such as model-based diagnosis, have offered some promise in addressing these problems. However, the difficulties of adapting these techniques to situations involving numerical reasoning and noise have limited the applicability of these techniques. This paper describes an extension of classical model-based diagnosis techniques to deal with sparse data, noise, and complex noninvertible numerical models. These diagnosis techniques are being applied to the External Active Thermal Control System for Space Station Freedom.

Rouquette, Nicolas

Kelvin waves in total column ozone

Tropical Kelvin waves have been observed previously in ozone mixing ratio data from the SBUV (Solar Backscatter Ultraviolet) and LIMS (Limb Infrared Monitor of the Stratosphere) instruments on board the Nimbus-7 satellite. The present study investigates Kelvin wave features in total column ozone, using version 6 data from the Total Ozone Mapping Spectrometer (TOMS) instrument (also on Nimbus-7). Results show eastward-propagating zonal waves 1-2 with periods approx. 5-15 days, amplitudes approx. 3-5 Dobson Units (1-2% of the time mean), and latitudinal symmetry typical of Kelvin waves. The analyses and a linear model in this study suggest that the primary source of the perturbations is slow Kelvin waves in the lower-to-middle stratosphere. Maximum Kelvin wave signatures occur in conjunction with westward lower-to-middle stratospheric equatorial zonal winds (a quasi-biennial oscillation (QBO) wind modulation effect). The significance of these results is that the TOMS data are shown to be useful for investigations with global coverage of a major component of tropical stratospheric dynamics, Kelvin waves. The TOMS data set with its excellent coverage and high quality should be useful in validating model studies in the relatively data sparse and dynamically difficult tropical region.

Ziemke, J. R.

Arctic sea ice albedo from AVHRR

The seasonal cycle of surface albedo of sea ice in the Arctic is estimated from measurements made with the Advanced Very High Resolution Radiometer (AVHRR) on the polar-orbiting satellites NOAA-10 and NOAA-11. The albedos of 145 200-km-square cells are analyzed. The cells are from March through September 1989 and include only those for which the sun is more than 10 deg above the horizon. Cloud masking is performed manually. Corrections are applied for instrument calibration, nonisotropic reflection, atmospheric interference, narrowband to broadband conversion, and normalization to a common solar zenith angle. The estimated albedos are relative, with the instrument gain set to give an albedo of 0.80 for ice floes in March and April. The mean values for the cloud-free portions of individual cells range from 0.18 to 0.91. Monthly averages of cells in the central Arctic range from 0.76 in April to 0.47 in August. The monthly averages of the within-cell standard deviations in the central Arctic are 0.04 in April and 0.06 in September. The surface albedo and surface temperature are correlated most strongly in March (R = -0.77) with little correlation in the summer. The monthly average lead fraction is determined from the mean potential open water, a scaled representation of the temperature or albedo between 0.0 (for ice) and 1.0 (for water); in the central Arctic it rises from an average 0.025 in the spring to 0.06 in September. Sparse data on aerosols, ozone, and water vapor in the atmospheric column contribute uncertainties to instantaneous, area-average albedos of 0.13, 0.04, and 0.08. Uncertainties in monthly average albedos are not this large. Contemporaneous estimation of these variables could reduce the uncertainty in the estimated albedo considerably. The poor calibration of AVHRR channels 1 and 2 is another large impediment to making accurate albedo estimates.

Lindsay, R. W.

Wind and pressure Fields Near Tropical Cyclone Oliver Derived From Scatterometer Observations

The results of this study demonstrate that the surface wind velocity and pressure fields derived from spaceborne scatterometers are useful in monitoring the location and intensity of tropical cyclones. Satellite-borne microwave scatterometers can penetrate the cloudy core regions of tropical cyclones to resolve the circulation in detail over data sparse regions. The location of the cyclone observed by the ERS-1 scatterometer is very close to that revealed in Geostationary Meteorological Satellite images. The surface winds provided by the ERS-1 scatterometer are used here with a modified two-layer planetary boundary layer model which includes effects of curvature, stability, and secondary flow to derive surface pressures near tropical cyclone Oliver. The curvature effect is found to be more significant than stability and secondary flow, which are crucial in deriving accurate surface pressure fields in midlatitudes.

Hsu, Carol S.

Wind and Pressure Fields Near Tropical Cyclone Oliver Derived from Scatterometer Observations

The results of this study demonstrate that the surface wind velocity and pressure fields derived from spaceborne scatterometers are useful in monitoring the location and intensity of tropical cyclones. Satellite-borne microwave scatterometers can penetrate the cloudy core regions of tropical cyclones to resolve the circulation in detail over data sparse regions. The location of the cyclone observed by the ERS-1 (First European Remote Sensing Satellite) scatterometer is very close to that revealed in Geostationary Meteorological Satellite images. The surface winds provided by the ERS-1 scatterometer are used here with a modified two-layer planetary boundary layer model which includes effects of curvature, stability, and secondary flow to derive surface pressures near tropical cyclone Oliver. The curvature effect is found to be more significant than stability and secondary flow, which are crucial in deriving accurate surface pressure fields in midlatitudes.

Hsu, Carol S.

TRMM Field Campaigns: Objectives and Status Report

The Tropical Rainfall Measuring Mission (TRMM) satellite has been sending valuable data since launch in November 1997. Some of the key goals of the joint NASA (US) and NASDA (Japan) mission are: (1) to estimate the four-dimensional diabatic heating in the tropical and subtropical atmosphere, (2) understand the role of latent heating in driving tropical and extratropical circulations, (3) obtain monthly area-averaged estimates of rainfall over the data-sparse oceans, and (4) estimate the relative contribution of convective and stratiform precipitation over different regions during different seasons. The overarching scientific objective is to understand and improve estimates of rainfall and latent heating profiles throughout the global tropics. This requires observations for fundamental understanding of cloud dynamics and microphysics, as well as for validation, testing assumptions and error estimates of cloud-resolving models, forward radiative transfer models, algorithms used to estimate rainfall statistics and vertical structure of precipitation from surface-based radar, and from satellites. Field experiments designed to contribute to this understanding have been conducted in Texas and the South China Sea in spring of 1998, Florida in summer of 1998, and interior Brazil in (boreal) winter 1999. In summer 1999, a major oceanic campaign will be based at Kwajalein Atoll. Some early results will be highlighted, noting some significant contrasts between oceanic and continental convective systems.

Zipser, Edward I.

Defining the Vortex Boundary Using N2O Measurements

Defining the stratospheric vortex boundary is typically done using; the Nash criterion,(a) which determines the maximum gradient of Ertel's potential vorticity (EPV) in the vicinity of maximum zonal winds. However, such a procedure is insensitive to small-scale variations near the boundary, because EPV maps rely on interpolation from sparse data, and are therefore only accurate over large areas. An examination was made of high-speed N2O measurements during SOLVE, from Argus ER-2 flights across the vortex boundary in the 1999-2000 Arctic winter, to see whether sharp changes in N2O concentrations co-occur sufficiently well with the Nash definition of the vortex edge to serve as a reliable alternate definition.

Greenblatt, Jeffery