Search NASA⌕ Search

SEARCH · Search NASA

Results for “stacked substrates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Ferroelectric Al1 − xBxN–GaN heterostructures

This report demonstrates Al0.93B0.7N thin films grown epitaxially on n-type GaN (0002)/c-plane sapphire substrates by reactive magnetron sputtering at 300 °C. At 200 nm film thickness, the Al0.93B0.07N layers exhibit partially relaxed substrate-induced epitaxial strain, a 0.16° wide (0002) rocking curve, in-plane crystallographic registry, and sub-nanometer surface roughness. Electrically, the stack shows robust hysteresis over three frequency decades, a remanent polarization of ∼125 μC/cm2, a strongly frequency dependent coercive field, highly uniform dc leakage currents, and endurance >106 field cycles. This report validates possibilities for ferroelectric nitride integration into conventional III-nitride heterostructures with high crystalline fidelity, high electrical resistivity, and persistent hysteresis. Such materials are synthesizable at thermal budgets and temperatures compatible with back-end-of-the-line boundary conditions.

Physics↗
DOE OSTI2023

Non-Linear Optics at Twist Interfaces in h-BN/SiC Heterostructures

Understanding the emergent electronic structure in twisted atomically thin layers has led to the exciting field of twistronics. However, practical applications of such systems are challenging since the specific angular correlations between the layers must be precisely controlled and the layers have to be single crystalline with uniform atomic ordering. Here, in this work, an alternative, simple, and scalable approach is suggested, where nanocrystalline two-dimensional (2D) film on 3D substrates yields twisted-interface-dependent properties. Ultrawide-bandgap hexagonal boron nitride (h-BN) thin films are directly grown on high in-plane lattice mismatched wide-bandgap silicon carbide (4H-SiC) substrates to explore the twist-dependent structure-property correlations. Concurrently, nanocrystalline h-BN thin film shows strong non-linear second-harmonic generation and ultra-low cross-plane thermal conductivity at room temperature, which are attributed to the twisted domain edges between van der Waals stacked nanocrystals with random in-plane orientations. First-principles calculations based on time-dependent density functional theory manifest strong even-order optical nonlinearity in twisted h-BN layers. This work unveils that directly deposited 2D nanocrystalline thin film on 3D substrates could provide easily accessible twist-interfaces, therefore enabling a simple and scalable approach to utilize the 2D-twistronics integrated in 3D material devices for next-generation nanotechnology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Electronically reconfigurable complex oxide heterostructure freestanding membranes

In recent years, lanthanum aluminate/strontium titanate (LAO/STO) heterointerfaces have been used to create a growing family of nanoelectronic devices based on nanoscale control of LAO/STO metal-to-insulator transition. The properties of these devices are wide-ranging, but they are restricted by nature of the underlying thick STO substrate. Here, single-crystal freestanding membranes based on LAO/STO heterostructures were fabricated, which can be directly integrated with other materials via van der Waals stacking. The key properties of LAO/STO are preserved when LAO/STO membranes are formed. Conductive atomic force microscope lithography is shown to successfully create reversible patterns of nanoscale conducting regions, which survive to millikelvin temperatures. The ability to form reconfigurable conducting nanostructures on LAO/STO membranes opens opportunities to integrate a variety of nanoelectronics with silicon-based architectures and flexible, magnetic, or superconducting materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Van der Waals Sandwich Structures for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) intensity of two-dimensional (2D) materials critically depends on the resonant conditions and factors such as the substrate interferences and molecule adsorption fluctuations, making comprehensive investigation, understanding, and optimization of 2D materials-assisted SERS challenging. Here, in this work, the wavelength-dependent SERS of van der Waals structures of 2D materials is systematically investigated, focusing on the intrinsic frequency-dependent Raman tensors by first-principles method while ruling out other extrinsic factors in experiments. Distinct enhancement profiles are found for different 2D materials, among which MoS2 and graphene exhibit remarkably strong and broadband enhancement effects. For stacked multilayers and heterostructures of 2D materials, the calculated SERS addresses the significance of the first contact monolayer effect. Based on the above theory, the van der Waals sandwich structures are proposed and investigated as the SERS substrates, verifying a further significantly enhanced SERS performance. This resonant first-principles study demonstrates a comprehensive and analytical way to explore and promote the SERS of van der Waals structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhancement-Mode GaN Monolithic Bidirectional Switch With Breakdown Voltage Over 3.3 kV

Here, this work demonstrates a GaN enhancement-mode monolithic bidirectional switch (MBDS) with breakdown voltage (BV) higher than 3.3 kV in both polarities. This MBDS is realized on a dual p-GaN gate high electron mobility transistor (HEMT) platform on sapphire substrate. It features a novel dual junction termination extension design for electric field management, which is built on the p-GaN layer in the gate stack and does not require epitaxial regrowth. The GaN MBDS exhibits symmetric on-state characteristics in both directions with a threshold voltage (V th ) of 0.6 V and a low specific on-resistance (R on,sp ) of 5.6 m Ω · cm2. This device presents the highest BV, as well as one of the best BV and R on,sp trade-offs, in all the reported MBDS devices. The R on,sp is lower than the performance limit of conventional BDS realized by two discrete devices. This 3.3 kV GaN MBDS opens the door for developing new circuit topologies and advancing system performance in medium-voltage power electronics.

42 ENGINEERING↗
DOE OSTI2020

Half‐Fused Diketopyrrolopyrrole‐Based Conjugated Donor–Acceptor Polymer for Ambipolar Field‐Effect Transistors

Abstract A novel building block, denoted as half‐fused diketopyrrolopyrrole (DPP) (9‐(3‐octadecylhenicosyl)‐8‐(thiophen‐2‐yl)‐7 H ‐pyrrolo[3,4‐ a ]thieno[3,2‐ g ]indolizine‐7,10(9 H )‐dione), in which one of the flanking thiophene units is fused to one of the DPP rings via a carbon‐carbon double bond at the N‐position is reported. The half‐fused DPP is successfully utilized as an electron acceptor to prepare the conjugated donor–acceptor polymer PTFDFT , which exhibits ambipolar semiconducting behavior in ambient air. Theoretical calculations and absorption spectral studies show that the backbone of PTFDFT is more planar compared to the reference polymer with conventional DPP units. As a result, PTFDFT shows a narrow bandgap and low lowest unoccupied molecular orbital level. The more planar backbone with fewer side chains favors the dense packing of the polymer chains of PTFDFT with a short π–π stacking distance (3.49 Å). Grazing‐incidence wide‐angle X‐ray scattering data further confirm the predominant edge‐on packing mode of the PTFDFT polymer chains on the substrate. As expected, the PTFDFT thin film shows excellent ambipolar semiconducting properties under ambient conditions, reaching 2.23 and 1.08 cm 2 V −1 s −1 for the n‐ and p‐channels, respectively. In addition, complementary‐like inverter with gain value as high as 141 is successfully constructed using the PTFDFT thin film.

Shi, Dandan↗
DOE OSTI2021

Colossal Grains for a New Structural Paradigm in Thin-Film Photovoltaics

II-VI based thin-film photovoltaics (PV) have experienced substantial commercial success on a foundation of fast large-scale deposition and processing. This type of processing, regardless of material type, nearly always results in small grain (nm to several um diameters) polycrystalline material that, if not for effective grain boundary (GB) and defect passivation, would severely limit PV performance. In the case of CdTe based PV technology, the nearly ubiquitous CdCl2 treatment is used, in part, to passivate the polycrystalline p-type absorber even though Cl is known to (and used to) compensate p-type II-VI materials. Given that VOC is still the most limited performance metric and it can only be improved through higher p-type absorber concentrations, CdCl2 treatments may be holding the technology back. In this talk, we will discuss results related to a process by which small grain CdSeTe material is rapidly transformed into very large grain material (100-1000um diameters, Fig. 1a). This explosive recrystallization, which we have termed colossal grain growth (CGG), occurs by a Cl free process with thin films (<10um) deposited using the same fast deposition techniques the industry has relied on for more than a decade. Our modeling suggests that GB recombination becomes significantly less important at these grain sizes and thus may eliminate the need for a CdCl2 treatment. This result is complimented by previous results of epitaxial growth at high rates on single crystal seed layers. Thin CdSeTe CGG seed layers can be used for rapid epitaxy of CdTe to complete a standard device stack (Fig.1b). This is an optimistic view and the current limitations and challenges related to this process and these materials will also be discussed, including alloy and substrate roughness sensitivity, intragrain material quality, and complex defect chemistry. These challenges are not insignificant but overcoming them may enable a new structural paradigm for thin-film PV.

CdTe↗
DOE OSTI2022

Direct Fabrication of Vertically Stacked Double Barrier Tunnel Junctions Based on Graphene and h-BN

Direct manufacturing of two-dimensional material-based double barrier (DB) tunnel junctions, based on a lithography-free approach was developed. Graphene/h-BN/Graphene/h-BN/Graphene devices were deposited on Si/SiO2 substrates by employing a plasma enhanced chemical vapor deposition technique in a sequential manner. DB tunneling junctions with varying barrier widths (by varying the thickness of the second graphene layer) were studied. Samples were characterized using Raman, Atomic Force Microscopy and X-ray photoemission spectroscopy. The I–V characteristics of tunneling current showed resonant tunneling behavior at room temperature with a negative differential conductance. The behavior could be explained with quantum mechanical double barrier tunneling model in which analytic solutions to Schrödinger’s equation were obtained in each region of the system. Resonances in transmission probability coefficient for varying barrier widths were evaluated and compared with the experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Mechanically stacked tandem photovoltaic cells with intermediate optical filters

A method of fabricating a multi-junction photosensitive device is provided. The method may include fabricating at least two photoactive layers, wherein at least one photoactive layer is fabricated on a transparent substrate, and at least one photoactive layer is fabricated on a reflective substrate, patterning at least one optical filter layer on at least one photoactive layer fabricated on a transparent substrate, and bonding the at least two photoactive layers using cold weld or van der Waals bonding. A multi-junction photosensitive device is also provided. The device may have at least two photoactive layers, and at least one optical filter layer, wherein at least two layers are bonded using cold weld or van der Waals bonding. The optical filter layer may be a Distributed Bragg Reflector.

Forrest, Stephen R.↗
DOE OSTI2026

Substrate-Directed Dimensional and Phase Control of Peptide Assemblies on Two-Dimensional van der Waals Materials

Understanding and controlling biomolecular self-assembly on van der Waals (vdW) materials has the potential to advance hybrid bioelectronic devices by enabling precise tuning of the interface and modulation of the resulting electronic properties of the biomolecule-vdW heterostructure. However, how surface properties of vdW materials direct biomolecule assembly remains poorly understood. To fill this knowledge gap, we investigated the assembly of a peptide known to assemble into two-dimensional (2D) crystalline films on MoS 2 on three representative vdW surfaces: WS 2 , MoS 2 , and highly oriented pyrolytic graphite (HOPG). Using in situ atomic force microscopy (AFM), we find that assembly is substrate-dependent, resulting in multilayers on WS 2 , monolayers on MoS 2 , and multiple coexisting phases on HOPG. WS 2 exhibits a higher negative charge, strong long-range electrostatic interactions, and extensive hydration layering that may promote multilayer stacking. In contrast, MoS 2 has stronger short-range interactions with the peptides but much weaker long-range interactions and hydration structure, which may favor monolayer formation. Molecular dynamics simulations predict a corresponding switch from monolayer to multilayer aggregates of the adsorbed monomers, reflected in their relative mobilities. On hydrophobic HOPG, the peptides bind most strongly and remain as monomers with high surface mobility. The peptide dimers comprising the basic unit of the crystals are more compact on HOPG, which has a smaller lattice constant than WS 2 or MoS 2 , suggesting strain contributes to stabilizing multiple phases. Our results provide mechanistic insights into how surface charge and hydration structure, and the lattice structure of the substrates governs peptide assembly on vdW materials, offering a framework to rationally control the 2D peptide-vdW heterostructures.

Molecular dynamics simulations↗
DOE OSTI2022

Silver Nanowire-Indium Zinc Oxide Composite Flexible Transparent Conducting Electrodes Made by Spin- coating and Photonic Curing

Realizing high-throughput, low-cost perovskite solar cell (PSC) manufacturing is highly sought-after in photovoltaic (PV) research in recent years. To fully achieve roll-to-roll (R2R) manufacturing of PSCs, it is important to consider the flexible transparent electrode (TE). PET/ITO is a commonly used substrate for making flexible PSCs. When optimizing transparent conducting materials, there is a tradeoff between sheet resistance (Rsh) and optical transparency. Because commercial PET/ITO substrates are made with slow (~1 m/min) vacuum deposition processes, they tend to be expensive. Therefore, it would be advantageous to develop a high-throughput, R2R compatible, solution-deposition approach for fabricating the TE on PET substrates. While various solution-deposition processes, such as blade coating or slot-die coating, can achieve the desired web speed of > 10 m/min, there is still a need to improve the post-deposition annealing step. One promising post-deposition processing technique is intense-pulsed-light processing, also known as photonic curing. Photonic curing delivers short (0.01 – 100 ms) pulses of broadband (200 – 1500 nm) light from a xenon flash lamp to the samples. Any materials in the sample stack that absorb light will convert the impinging light pulse into heat within the sample, which drives changes in the sample (calcination, phase change, crystallization, etc.). Photonic curing has three main advantages over thermal annealing: 1. Faster processing speed (milliseconds or seconds). 2. Compatibility with plastic substrates. 3. Smaller physical footprint and less wasted energy. Since the light pulses are on for a short time, the intensity can be high while the total energy delivered to the sample is low, minimizing damages to the plastic substrates. In this work, a hybrid TE material is fabricated on PET substrates using photonic curing. The hybrid TE material contains a layer of silver nanowires (AgNWs) and a layer of metal-oxide (InOx, ITO, IZO, etc.). The AgNWs increase the light absorbed by the film during the photonic curing process, which leads to higher processing temperatures, possibly improving the conversion of the metal-oxide layer. The AgNWs also enhance the electrical conductivity of the final TE layer after photonic curing. A AgNW and metal-oxide bilayer is formed by spin coating each solution onto the PET substrate sequentially followed by a single photonic curing process. We use average optical transmittance (Tavg) from 400 to 700 nm and average Rsh to evaluate the TE performance. The following photonic curing parameters are varied to optimize Tavg (maximize) and Rsh (minimize): Pulse voltage, pulse envelope, number of micro-pulses, duty cycle, number of pulses, and pulse repetition rate. Preliminarily, we also observe a significant impact on the TE properties by the volume of AgNW deposited during the spin coating deposition step. Using dispense volumes of 80 µL and 20 µL, we achieve samples with Tavg = 73%, Rsh = 19 Ω/sq, and roughness = 9 nm, and Tavg = 83%, Rsh = 58 Ω/sq, and roughness = 5.6 nm, respectively, after photonic curing.

14 SOLAR ENERGY↗
DOE OSTI2023

Visualizing symmetry-breaking electronic orders in epitaxial Kagome magnet FeSn films

Abstract Kagome lattice hosts a plethora of quantum states arising from the interplay of topology, spin-orbit coupling, and electron correlations. Here, we report symmetry-breaking electronic orders tunable by an applied magnetic field in a model Kagome magnet FeSn consisting of alternating stacks of two-dimensional Fe 3 Sn Kagome and Sn 2 honeycomb layers. On the Fe 3 Sn layer terminated FeSn thin films epitaxially grown on SrTiO 3 (111) substrates, we observe trimerization of the Kagome lattice using scanning tunneling microscopy/spectroscopy, breaking its six-fold rotational symmetry while preserving the translational symmetry. Such a trimerized Kagome lattice shows an energy-dependent contrast reversal in dI/dV maps, which is significantly enhanced by bound states induced by Sn vacancy defects. This trimerized Kagome lattice also exhibits stripe modulations that are energy-dependent and tunable by an applied in-plane magnetic field, indicating symmetry-breaking nematicity from the entangled magnetic and charge degrees of freedom in antiferromagnet FeSn.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Aluminum Oxide Passivating Tunneling Interlayers for Molybdenum Oxide Hole-Selective Contacts

Aluminum oxide thin films fabricated via atomic layer deposition are introduced as passivating tunneling interlayers between hole-selective molybdenum oxide contacts and silicon absorbers. Surface recombination velocity and specific contact resistivity are reported as a function of Al 2 O 3 thickness. The effects of substrate chemical pretreatment, the thermal history of the Al 2 O 3 layers prior to MoOx deposition, and the thermal history of the completed Al 2 O 3 /MoO x stacks were also investigated. When an SiO x /Al 2 O 3 passivating stack was incorporated and the completed test structure was annealed at 200 °C, the observed recombination velocities were reduced from ~10 000 cm/s for an unpassivated (initially hydrogen-terminated) Si/MoO x direct contact to ~500 cm/s, while maintaining a contact resistivity at or below 0.1 Ω·cm 2 . Finally, the data demonstrate the capability of ultrathin Al 2 O 3 to improve Si/MoO x contact properties and may be of interest in the design of future Si heterojunctions.

14 SOLAR ENERGY↗
DOE OSTI2020

Magnetic structure of Fe 16 N 2 determined by polarized neutron diffraction on thin-film samples

Strain-free Fe 16 N 2 thin films were obtained on MgO (001) single-crystal substrates with Cr seed layers. Additionally, x-ray diffraction and transmission electron microscopy confirmed that the film is textured in all three spatial directions with crystallographic orientation determined by epitaxial constraints from the substrate. Average grain size was estimated to be in the range of tens of nanometers. Ten pieces of 40-nm-thick Fe 16 N 2 thin-film samples were stacked together for half-polarized neutron diffraction study at room temperature. A total of six reflections were usable, from which the magnetic structure of Fe 16 N 2 was determined and compared to existing models. Contrary to most electronic structure calculations, the present results suggest that the magnetic moment of Fe atoms at the 8h site is large and larger than that of the 4d site. Our results support the giant magnetization of Fe 16 N 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microwave Annealing for Fast and Effective Hydrogen Activation in Polycrystalline Silicon Passivating Contacts

Hydrogenation is a crucial step in the fabrication of high-efficiency silicon solar cells. In this study, the effectiveness of hydrogen activation is demonstrated via microwave annealing of hydrogen-rich dielectrics coated on poly-Si passivating contacts. This method is compared with conventional hydrogenation techniques, such as annealing in N2 in the presence of a hydrogen-rich source (such as hydrogenated aluminum oxide (AlOx:H), hydrogenated silicon nitride (SiNy:H), or a AlOx:H/SiNy:H stack). Key improvements observed include a reduction in J0 from 30 to <5 fA cm-2, an increase in iVoc from 690 to >730 mV, and an enhancement in effective lifetime (teff) from 0.6 to ~3.5 milliseconds on phosphorus-doped poly-Si/SiO2 passivating contact samples. With a very short annealing time of ~1-2 min, the samples passivated by AlOx:H, SiNy:H, or the stack show similar performance to samples subjected to 30 min of nitrogen annealing. Photoluminescence (PL) spectra corroborate the findings regarding the hydrogenation of the poly-Si layer and the c-Si substrate, with an increase in PL intensity after microwave annealing. Ultimately, this work suggests that microwave annealing could be a promising addition, offering flexibility to traditional firing hydrogenation processes.

hydrogenation↗
DOE OSTI2021

Epitaxial nanotwinned metals and alloys: synthesis-twin structure–property relations

Extensive studies have been performed to understand the structure–property relationship in nanotwinned (NT) metals, where the average twin thickness or twin spacing is less than 100 nm. NT metals may have high strength, ductility, good electrical conductivity and corrosion resistance and have promising applications in microelectronics, structural materials and coatings for gas and oil industry. Most prior studies focus on the computational and experimental investigations of NT metals with low stacking fault energy (SFE) and often in polycrystalline forms. In this highlight, we review recent findings on epitaxial growth of NT metals and alloys with low and high SFEs deposited on single crystal substrates, and focus primarily on advancing our comprehension towards tailoring the microstructures and properties of NT metals via extrinsic factors, including the synthesis technique, parametric control and growth template, and intrinsic factors, such as SFE and thermodynamic, kinetic alloying effects. The review intends to illuminate how to synthesize and design epitaxial NT structures to achieve desirable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Poly-Si Passivating Contacts Hydrogenation by Microwave Annealing

Hydrogenation is a crucial step in the fabrication of high-efficiency silicon solar cells. In this study, we demonstrate the for the first time effectiveness of hydrogen activation via microwave annealing of hydrogen-rich dielectrics coated on poly-Si passivating contacts. This method is compared with conventional hydrogenation techniques, such as annealing in N2 in the presence of a hydrogen-rich source (such as hydrogenated aluminum oxide (AlOx:H), hydrogenated silicon nitride (SiNy:H), or a AlOx:H/SiNy:H stack). Key improvements observed include a reduction in J0 from 30 to <5 fA/cm2, an increase in iVoc from 690 to >730 mV, and an enhancement in effective lifetime (teff) from 0.6 to ~3.5 milliseconds on phosphorus-doped poly-Si/SiO2 passivating contact samples. With a very short annealing time of ~1-2 minutes, the samples passivated by AlOx:H, SiNy:H, or the stack show similar performance to samples subjected to 30 minutes of nitrogen annealing. Photoluminescence (PL) spectra corroborate our findings regarding the hydrogenation of the poly-Si layer and the c-Si substrate, with an increase in PL intensity after microwave annealing. Ultimately, our work suggests that microwave annealing could be a promising addition, offering flexibility to traditional firing hydrogenation processes.

14 SOLAR ENERGY↗
DOE OSTI2024

Buffer-layer-controlled nickeline vs zinc-blende/wurtzite-type MnTe growths on c -plane Al 2 O 3 substrates

In the recent past, MnTe has proven to be a crucial component of the intrinsic magnetic topological insulator (IMTI) family [MnTe] m [Bi2Te 3 ] n , which hosts a wide range of magneto-topological properties depending on the choice of m and n. However, bulk crystal growth allows only a few combinations of m and n for these IMTIs due to the strict limitations of the thermodynamic growth conditions. One way to overcome this challenge is to utilize atomic layer-by-layer molecular beam epitaxy (MBE) technique, which allows arbitrary sequences of [MnTe]m and [Bi 2 Te 3 ] n to be formed beyond the thermodynamic limit. For such MBE growth, finding optimal growth templates and conditions for the parent building block, MnTe, is a key requirement. Here, we report that two different hexagonal phases of MnTe - nickeline (NC) and zinc-blende/wurtzite (ZB-WZ) structures, with distinct in-plane lattice constants of 4.20 ± 0.04 Å and 4.39 ± 0.04 Å, respectively - can be selectively grown on c-plane Al 2 O 3 substrates using different buffer layers and growth temperatures. Moreover, we provide the first comparative studies of different MnTe phases using atomic-resolution scanning transmission electron microscopy and show that ZB and WZ-like stacking sequences can easily alternate between the two. Surprisingly, In 2 Se 3 buffer layer, despite its lattice constant (4.02 Å) being closer to that of the NC phase, fosters the ZB-WZ instead, whereas Bi 2 Te 3 , sharing the same lattice constant (4.39 Å) with the ZB-WZ phase, fosters the NC phase. Furthermore, these discoveries suggest that lattice matching is not always the most critical factor determining the preferred phase during epitaxial growth. Overall, this will deepen our understanding of epitaxial growth modes for chalcogenide materials and accelerate progress toward new IMTI phases as well as other magneto-topological applications.

36 MATERIALS SCIENCE↗