Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Spacelab payload accommodation handbook. Appendix B: Structure interface definition module

The mechanical interfaces between Spacelab and its payload are defined. The envelopes available for mounting payload hardware are specified together with the standard structural attachment interfaces. Overall load capabilities and the local load capabilities for individual attachment interfaces are defined for the standard mounting locations. The mechanical environment is defined and the mechanical interfaces between the payload and the EPDS, CDMS and ECS are included.

Source record↗

Excerpts from Test Films: Langley Impacting Structures Facility, Lunar Module

The film includes excerpts from three studies: (1) Landing characteristics of a dynamic model of the HL-10 manned lifting entry vehicle, conducted by Sandy M. Stubbs, in which the vehicle landed on water at horizontal velocities of 240- and 250-feet per second (ft/sec). (2) Dynamic model investigation of water pressures and accelerations encountered during landings of the Apollo spacecraft conducted by Sandy M. Stubbs, in which horizontal velocity was 50 ft/sec. and pitch attitude was -12 and -28 degrees. (3) Comparative landing impact tests of a 1/6-scale model as a free body under earth gravity and a tethered full-scale lunar module on the Lunar Gravity Simulator. Landing 8 is shown, with a vertical velocity of 10 ft/sec. and a horizontal velocity of 8 ft/sec. Motion pictures were taken at 400 and 64 pps.

Source record↗

An enhancement of NASTRAN for the seismic analysis of structures

New modules, bulk data cards and DMAP sequence were added to NASTRAN to aid in the seismic analysis of nuclear power plant structures. These allow input consisting of acceleration time histories and result in the generation of acceleration floor response spectra. The resulting system contains numerous user convenience features, as well as being reasonably efficient.

Burroughs, J. W.↗

On linear structure and phase rotation invariant properties of block M-PSK modulation codes

Two important structural properties of block M(=2')-ary PSK modulation codes, linear structure and phase symmetry, are investigated. An M-ary modulation code is first represented as a code with symbols from the integer group S(MPSK) = (0,1,2,...M-1) under modulo-M addition. Then the linear structure of block MPSK modulation codes over S(M-PSK) with respect to modulo-M vector addition is defined, and conditions are derived under which a block MPSK modulation code is linear. Once the linear structure is developed, the phase symmetry of block M-PSK modulation codes is studied. In particular, a necessary and sufficient condition for a block MPSK modulation code that is linear as a binary code to be invariant under 2 h 180 deg/M phase rotation (for h = 1 to l) is derived. Finally, a list of short 8PSK and 16PSK modulation codes is given, together with their linear structure and the smallest phase rotation for which a code is invariant.

Kasami, Tadao↗

Characterization of the transport properties of channel delta-doped structures by light-modulated Shubnikov-de Haas measurements

The transport properties of channel delta-doped quantum well structures were characterized by conventional Hall effect and light-modulated Shubnikov-de Haas (SdH) effect measurements. The large number of carriers that become available due to the delta-doping of the channel, leads to an apparent degeneracy in the well. As a result of this degeneracy, the carrier mobility remains constant as a function of temperature from 300 K down to 1.4 K. The large amount of impurity scattering, associated with the overlap of the charge carriers and the dopants, resulted in low carrier mobilities and restricted the observation of the oscillatory magneto-resistance used to characterize the two-dimensional electron gas (2DEG) by conventional SdH measurements. By light-modulating the carriers, we were able to observe the SdH oscillation at low magnetic fields, below 1.4 tesla, and derive a value for the quantum scattering time. Our results for the ratio of the transport and quantum scattering times are lower than those previously measured for similar structures using much higher magnetic fields.

Mena, R. A.↗

Multi-level modulation codes and multi-stage decoding

Multi-level method is a powerful technique for constructing bandwidth efficient modulation codes. It allows the construction of modulation codes systematically with arbitrary large minimum squared Euclidean distance from component codes in conjunction with proper bits-to-signal mapping. If the component codes are chosen properly, the resultant modulation code not only has good minimum squared Euclidean distance but is also rich in structural properties such as: linear structure, phase invariant property, and trellis structure. A modulation code with linear structure has invariant distance distribution. Phase invariant property is useful in resolving carrier-phase ambiguity and ensuring rapid carrier-phase resynchronization after temporary loss of synchronization. It the component codes have trellis structure, the resultant multi-level modulation code also has trellis structure. Trellis structure allows decoding of a multi-level modulation code with the soft-decision Viterbi decoding algorithm. Furthermore, the multi-level structure allows decoding of a multi-level modulation code with the multi-stage decoding. This type of decoding reduces the decoding complexity. Multi-stage decoding is not optimum even though the decoding of each component is optimum. Based on the analysis and simulation results, the difference in error performance between the optimum decoding of the overall multi-level modulation code and the suboptimum multi-stage decoding of the code is very little, a fraction of dB loss.

Lin, Shu↗

Flame characteristics of a NASA contra swirler module

The structure of unconfined flames stabilized on a NASA contra-swirl can has been examined. The structure depends on reference velocity and fuel-air ratio, and photographic illustrations of representative examples of each flame type are shown. A highly compact flame is obtained over a narrow band of fuel-air ratios, within the total range over which flames may be stabilized, at high reference velocity (27.8 m/s). The compact structure can only be obtained with careful fuel nozzle location. Chemical concentration profiles, temperature profiles and sodium chloride seeding experiments all confirm the visual impression of compactness. A flame with 50% greater fuel throughput has a much less compact structure, which is reflected in lower maximum temperature, much more complex chemical concentration distributions and a more diffuse recirculation boundary as observed by sodium chloride seeding than in the compact flame. Each of these flames has not only an evident axial recirculation core but also a toroidal recirculation region over the bluff region between the inner and outer swirlers. In contrast, laser Doppler velocimetry measurements carried out on a flame with lower reference velocity (5.65 m/s) do not indicate the presence of a secondary recirculation region in this flame.

Thompson, D.↗

Empirical testing of structural deflection modeling of large photovoltaic modules

The objective of the structural deflection test was to verify the analytical models used to predict solar cell stress, load-bearing layer stress, and module deflection that result from a uniform pressure load on the module surface. The verification process consisted of measuring module deflection, stress in the solar cell, and stress in the load-bearing member as a functon of normal pressure load, pottant modulus of elasticity, pottant thickness, and cell location. Four glass superstrate modules, two plain wood substrate modules, two ribbed wood substrate modules, and a steel substrate module were tested. Consistent with analysis predictions, all unribbed specimens exhibited nonlinear load vs. deflection characteristics. With the exception of the steel module, test results and analysis predictions for panel deflectons agreed to within 10 percent. A wider variation of agreement was found for stress in the load-bearing members and cells.

Duncan, L. B.↗

Long Term Displacement Data of Woven Fabric Webbings Under Constant Load for Inflatable Structures

Inflatable modules for space applications offer weight and launch volume savings relative to current metallic modules. Limited data exist on the creep behavior of the restraint layer of inflatable modules. Long-term displacement and strain data of two high strength woven fabric webbings, Kevlar and Vectran, under constant load is presented. The creep behavior of webbings is required by designers to help determine service life parameters of inflatable modules. Four groups of different webbings with different loads were defined for this study. Group 1 consisted of 4K Kevlar webbings loaded to 33% ultimate tensile strength and 6K Vectran webbings loaded to 27% ultimate tensile strength, group 2 consisted of 6K Kevlar webbings loaded to 40% and 43% ultimate tensile strength, and 6K Vectran webbings loaded to 50% ultimate tensile strength, group 3 consisted of 6K Kevlar webbings loaded to 52% ultimate tensile strength and 6K Vectran webbings loaded to 60% ultimate tensile strength, and group 4 consisted of 12.5K Kevlar webbings loaded to 22% ultimate tensile strength, and 12.5K Vectran webbings loaded to 22% ultimate tensile strength. The uniquely designed test facility, hardware, displacement measuring devices, and test data are presented. Test data indicate that immediately after loading all webbings stretch an inch or more, however as time increases displacement values significantly decrease to fall within a range of several hundredth of an inch over the remainder of test period. Webbings in group 1 exhibit near constant displacements and strains over a 17-month period. Data acquisition was suspended after the 17th month, however webbings continue to sustain load without any local webbing damage as of the 21st month of testing. Webbings in group 2 exhibit a combination of initial constant displacement and subsequent increases in displacement rates over a 16-month period. Webbings in group 3 exhibit steady increases in displacement rates leading to webbing failure over a 3-month period. Five of six webbings experienced local damage and subsequent failure in group 3. Data from group 4 indicates increasing webbing displacements over a 7-month period. All webbings in groups 1, 2, and 4 remain suspended without any local damage as of the writing of this paper. Variations in facility temperatures over test period seem to have had limited effect on long-term webbing displacement data.

Kenner, Winfred S.↗

Anisotropic transport in modulation doped quantum well structures

The degree of anisotropy in the anisotropic electron transport that has been observed in GaAs modulation-doped quantum wells grown by MBE on Al(0.3)Ga(0.7)As is related to the thickness and growth parameters of this substrate, which is grown just prior to the inverted interface. It is presently observed that the inverted interface has an anisotropic roughness which affects the 77 K low field electron transport parallel to the interface, and gives rise to anisotropic electron scattering in the GaAs modulation-doped quantum well.

Radulescu, D. C.↗

On linear structure and phase rotation invariant properties of block 2(sup l)-PSK modulation codes

Two important structural properties of block 2(l)-ary PSK (phase shift keying) modulation codes, linear structure and phase symmetry, are investigated. For an additive white Gaussian noise (AWGN) channel, the error performance of a modulation code depends on its squared Euclidean distance distribution. Linear structure of a code makes the error performance analysis much easier. Phase symmetry of a code is important in resolving carrier phase ambiguity and ensuring rapid carrier phase resynchronization after temporary loss of synchronization. It is desirable for a code to have as many phase symmetries as possible. A 2(l)-ary modulation code is represented here as a code with symbols from the integer group. S sub 2(l) PSK = (0,1,2,...,2(l)-1), under the modulo-2(l) addition. The linear structure of block 2(l)-ary PSK modulation codes over S sub 2(l)-ary PSK with respect to the modulo-2(l) vector addition is defined, and conditions under which a block 2(l)-ary PSK modulation code is linear are derived. Once the linear structure is developed, phase symmetry of a block 2(l)-ary PSK modulation code is studied. It is a necessary and sufficient condition for a block 2(l)-PSK modulation code, which is linear as a binary code, to be invariant under 180 deg/2(l-h) phase rotation, for 1 is less than or equal to h is less than or equal to l. A list of short 8-PSK and 16-PSK modulation codes is given, together with their linear structure and the smallest phase rotation for which a code is invariant.

Lin, Shu↗

Design and development of a space station hazardous material system for assessing chemical compatibility

As the Space Station nears reality in funding support from Congress, NASA plans to perform over a hundred different missions in the coming decade. Incrementally deployed, the Space Station will evolve into modules linked to an integral structure. Each module will have characteristic functions, such as logistics, habitation, and materials processing. Because the Space Station is to be user friendly for experimenters, NASA is anticipating that a variety of different chemicals will be taken on-board. Accidental release of these potentially toxic chemicals and their chemical compatibility is the focus of this discourse. The Microgravity Manufacturing Processing Facility (MMPF) will contain the various facilities within the U.S. Laboratory (USL). Each facility will have a characteristic purpose, such as alloy solidification or vapor crystal growth. By examining the proposed experiments for each facility, identifying the chemical constituents, their physical state and/or changes, byproducts and effluents, those payloads can be identified which may contain toxic, explosive, or reactive compounds that require processing or containment in mission peculiar waste management systems. Synergistic reactions from mixed effluent streams is of major concern. Each experiment will have it own data file, complete with schematic, chemical listing, physical data, etc. Chemical compatibility information from various databases will provide assistance in the analysis of alternate disposal techniques (pretreatment, separate storage, etc.). Along with data from the Risk Analysis of the Proposed USL Waste Management System, accidental release of potentially toxic and catastrophic chemicals would be eliminated or reduced.

Congo, Richard T.↗

Imaging Modulated Reflections from a Semi-Crystalline State of Profilin:Actin Crystals

Commensurate and incommensurate modulation in protein crystals remain terra incognita for crystallographers. While small molecule crystallographers have successfully wrestled with this type of structure, no modulated macromolecular structures have been determined to date. In this work, methods and strategies have been developed to collect and analyze data from modulated macromolecular crystals. Preliminary data using these methods are presented for a semi-crystalline state of profilin:actin.

Lovelace, J.↗

Inflatable Vessel and Method

An inflatable module comprising a structural core and an inflatable shell, wherein the inflatable shell is sealingly attached to the structural core. In its launch or pre-deployed configuration, the wall thickness of the inflatable shell is collapsed by vacuum. Also in this configuration, the inflatable shell is collapsed and efficiently folded around the structural core. Upon deployment, the wall thickness of the inflatable shell is inflated; whereby the inflatable shell itself, is thereby inflated around the structural core, defining therein a large enclosed volume. A plurality of removable shelves are arranged interior to the structural core in the launch configuration. The structural core also includes at least one longeron that, in conjunction with the shelves, primarily constitute the rigid, strong, and lightweight load-bearing structure of the module during launch. The removable shelves are detachable from their arrangement in the launch configuration so that, when the module is in its deployed configuration and launch loads no longer exist, the shelves can be rearranged to provide a module interior arrangement suitable for human habitation and work. In the preferred embodiment, to provide efficiency in structural load paths and attachments, the shape of the inflatable shell is a cylinder with semi-toroidal ends.

Raboin, Jasen L.↗

Basic concepts for the design of high-efficiency single-junction and multibandgap solar cells

Concepts for obtaining practical solar-cell modules with one-sun efficiencies up to 30 percent at air mass 1 are now well understood. Such high-efficiency modules utilize multibandgap structures. To achieve module efficiencies significantly above 30 percent, it is necessary to employ different concepts such as spectral compression and broad-band detection. A detailed description of concepts for the design of high-efficiency multibandgap solar cells is given.

Fan, J. C. C.↗

Freedom Station wall design using hydrodynamic modelling

The paper outlines selected outputs from an ongoing Marshall Space Flight Center/US Army Corps of Engineers parametric study of the effects of meteoroid/space debris impacts on Space Station Freedom module wall protection structures. The advantages and limitations of HULL hydrocode computer simulation are discussed, and examples of meteoroid/ debris impacts on various wall structural designs are presented. Trends in the terminal effects of particle sizes, velocities, shapes, and impact angles upon structural design parameters (wall and bumper thickness and spacing) are summarized and depicted through selected simulation runs. Throughout the paper, proposed structural modifications to the baseline module protection structure will be examined which are capable of mitigating damage from particle impacts.

Williamsen, Joel E.↗

Anisotropic transport in modulation-doped quantum-well structures

Anisotropic electron transport has been observed in GaAs modulation-doped quantum wells grown by molecular-beam epitaxy on a thick (001) Al(0.3)Ga(0.7)As buffer grown at 620 C. Thicker quantum wells (150, 200, and 300 A) show progressively less anisotropy, which vanishes for a 300-A quantum well. The degree of anisotropy is also reduced or eliminated by suspending growth of the Al(0.3)Ga(0.7)As for a period of 300 s prior to growing the GaAs quantum well. Growing the Al(0.3)Ga(0.7)As buffer at higher temperatures (680 C) also reduces the degree of anisotropy. Higher two-dimensional electron gas sheet densities result in less anisotropy.The anisotropy is eliminated by replacing the thick Al(0.3)Ga(0.7)As buffer with a periodic multilayer structure comprising 15 A of GaAs and 200 A of Al(0.3)Ga(0.7)As. The degree of anisotropy is related to the thickness and growth parameters of the Al(0.3)Ga(0.7)As layer grown just prior to the growth of the GaAs.

Radulescu, D. C.↗