Search NASA⌕ Search

SEARCH · Search NASA

Results for “superlattices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Light-induced ferromagnetism in moiré superlattices

Many-body interactions between carriers lie at the heart of correlated physics. The ability to tune such interactions would allow the possibility to access and control complex electronic phase diagrams. Recently, two-dimensional moiré superlattices have emerged as a promising platform for quantum engineering such phenomena. The power of the moiré system lies in the high tunability of its physical parameters by adjusting the layer twist angle, electrical field, moiré carrier filling and interlayer coupling. In this work, we report that optical excitation can highly tune the spin–spin interactions between moiré-trapped carriers, resulting in ferromagnetic order in WS 2 /WSe 2 moiré superlattices. Near the filling factor of v = 1/3 (that is, one hole per three moiré unit cells), as the excitation power at the exciton resonance increases, a well-developed hysteresis loop emerges in the reflective magnetic circular dichroism signal as a function of magnetic field, a hallmark of ferromagnetism. The hysteresis loop persists down to charge neutrality, and its shape evolves as the moiré superlattice is gradually filled, indicating changes of magnetic ground state properties. The observed phenomenon points to a mechanism in which itinerant photoexcited excitons mediate exchange coupling between moiré-trapped holes. This exciton-mediated interaction can be of longer range than direct coupling between moiré-trapped holes, and thus magnetic order arises even in the dilute hole regime. This discovery adds a dynamic tuning knob to the rich many-body Hamiltonian of moiré quantum matter.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dirac energy spectrum and inverted bandgap in metamorphic InAsSb/InSb superlattices

A Dirac-type energy spectrum was shown in gapless ultra-short-period metamorphic InAsSb/InSb superlattices by angle-resolved photoemission spectroscopy (ARPES) measurements. The Fermi velocity value 7.4x10 5 m/s in a gapless superlattice with a period of 6.2nm is in a good agreement with the results of magneto-absorption experiments. An “inverted” bandgap opens in the center of the Brillouin zone at higher temperatures and in the superlattice with a larger period. The ARPES data suggest the presence of a surface electron accumulation layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Strain effects on stability of topological ferroelectric polar configurations in (PbTiO3) n /(SrTiO3) n superlattices

The (PbTiO3)n/(SrTiO3)n (PTO/STO) superlattice system has been shown to exhibit interesting topological phases (e.g., vortices and skyrmions) in addition to normal ferroelectric domain states. Existing studies are mostly focused on the dependence of topological polar distributions and properties of PTO/STO superlattice on its periodicity. Here, we study the strain effect on the topological phase transitions and ferroelectric domain structures employing phase-field simulations. We summarized in an isotropic strain (in-plane misfit strain along the x direction is equal to that along the y direction) periodicity phase diagram displaying the stability regions of different polar topological states, including normal ferroelectric twins, vortices, skyrmions, and mixtures of vortices and twins. We also analyzed the polarization configurations under anisotropic in-plane strains (in-plane misfit strain along the x direction is not equal to that along the y direction) and demonstrated that the strain anisotropy can be used to tune the directions of vortex arrays along either the [100] pc or [010] pc directions or labyrinth vortex arrays. This work offers guidance to manipulating polar structures in the PTO/STO superlattices via strain engineering.

Physics↗
DOE OSTI2024

Interlayer engineering of Fe 3 GeTe 2 : From 3D superlattice to 2D monolayer

The discoveries of ferromagnetism down to the atomically thin limit in van der Waals (vdW) crystals by mechanical exfoliation have enriched the family of magnetic thin films [C. Gong et al., Nature 546 , 265–269 (2017) and B. Huang et al., Nature 546 , 270–273 (2017)]. However, compared to the study of traditional magnetic thin films by physical deposition methods, the toolbox of the vdW crystals based on mechanical exfoliation and transfer suffers from low yield and ambient corrosion problem and now is facing new challenges to study magnetism. For example, the formation of magnetic superlattice is difficult in vdW crystals, which limits the study of the interlayer interaction in vdW crystals [M. Gibertini, M. Koperski, A. F. Morpurgo, K. S. Novoselov, Nat. Nanotechnol. 14 , 408–419 (2019)]. Here, we report a strategy of interlayer engineering of the magnetic vdW crystal Fe 3 GeTe 2 (FGT) by intercalating quaternary ammonium cations into the vdW spacing. Both three-dimensional (3D) vdW superlattice and two-dimensional (2D) vdW monolayer can be formed by using this method based on the amount of intercalant. On the one hand, the FGT superlattice shows a strong 3D critical behavior with a decreased coercivity and increased domain wall size, attributed to the co-engineering of the anisotropy, exchange interaction, and electron doping by intercalation. On the other hand, the 2D vdW few layers obtained by over-intercalation are capped with organic molecules from the bulk crystal, which not only enhances the ferromagnetic transition temperature ( T C ), but also substantially protects the thin samples from degradation, thus allowing the preparation of large-scale FGT ink in ambient environment.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Upper critical magnetic field and multiband superconductivity in artificial high-𝑇 𝑐 superlattices of nano quantum wells

Artificial high-T c superlattices (AHTS) composed of quantum building blocks with tunable superconducting critical temperature have been synthesized by engineering their nanoscale geometry using the Bianconi-Perali Valletta (BPV) two-gap superconductivity theory. These quantum heterostructures consist of quantum wells made of superconducting, modulation-doped Mott insulators (S), confined by a metallic (N) potential barrier. The lattice geometry has been carefully engineered to induce the predicted Fano-Feshbach shape resonance between the gaps, near a topological Lifshitz transition. Here, we validate the BPV theory by providing compelling experimental evidence that AHTS samples, at the peak of the superconducting dome, exhibit resonant two-band, two-gap superconductivity. This is demonstrated by measuring the temperature dependence of the upper critical magnetic field, μ 0 H c2 , in samples with superlattice periods 3.3 < d < 5.28 nm and L/d ratios close to the magic value 2/3 (where L is the thickness of the superconducting La 2 CuO 4 layer and d is the superlattice period). Here, the data reveal the predicted upward concavity in H c2 (T) and a characteristic kink in the coherence length as a function of temperature, confirming the predicted two-band superconductivity with Fermi velocity ratio ≈ 0.25 and significant pair-exchange term among the two condensates.

Heterostructures↗
DOE OSTI2021

Enhanced orbital anisotropy through the proximity to a SrTiO 3 layer in the perovskite iridate superlattices

We have used angle-dependent soft x-ray absorption spectroscopy (XAS) at the O K edge and first-principles calculations to investigate the electronic structures of iridate-based superlattices ( SrIr O 3 ) m / ( SrTi O 3 ) ( m = 1 , 2, 3, and ∞). We focus on the pre-edge Ir 5 d t 2 g – O 2 p orbital hybridization feature in the XAS spectra. By varying the measurement geometry relative to the incident photon polarization, we are able to extract the dichroic contrast and observe the systematic increase in the anisotropy of Ir 5 d orbitals as m decreases. First-principles calculations elucidate the orbital anisotropy coming mainly from the enhanced out-of-plane compression of Ir O 6 octahedra in the SrIr O 3 layers that are adjacent to the inserted SrTi O 3 layers. As m decreases, the increased volume fraction of these interfacial SrIr O 3 layers and their contact with the SrTi O 3 layers within the ( SrIr O 3 ) m / ( SrTi O 3 ) supercell lead to enhanced orbital anisotropy. Furthermore, the tilt and rotation of Ir O 6 octahedra are shown to be essential to understand the subtle orbital anisotropy in these superlattices, and constraining these degrees of freedom will give an incorrect trend. Overall, our results demonstrate that the structural constraint from the inserted SrTi O 3 layers, in addition to other electronic means such as polar interface and charge transfer, can serve as a knob to control the orbital degree of freedom in these iridate-based superlattices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Interface engineering of phase separation in SrRuO 3 /SrTiO 3 hybrid superlattices

Most observed phase separation phenomena in complex oxides occur in systems with chemical dopants or structural defects, and theories have established the strong connection between phase separation and the random distribution of chemical dopants. Recent experiments on fabricated high-quality oxide superlattices also confirmed that the phase separation is suppressed in the clean systems without chemical disorders. Thus far, phase separation in strongly correlated oxides without the need of chemical dopants or structural defects has not been fully demonstrated. Here, we have built chemically ordered hybrid superlattices using prototypical SrRuO 3 and SrTiO 3 perovskite oxides. Contrary to previous understandings, we observe phase separation of two magnetic phases with different spin easy axes. We elucidate this phenomenon through first-principles calculations that the hybrid superlattices have a spontaneous structural instability, leading to a coexistence of ferromagnetic and antiferromagnetic phases. In this work, our findings provide an alternative pathway other than chemical doping to introduce phase separation in correlated oxides and imply that phase separation can exist in clean systems without the need of chemical disorders.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Band Engineering of Large-Twist-Angle Graphene/h-BN Moiré Superlattices with Pressure

Graphene interfacing hexagonal boron nitride (h-BN) forms lateral moiré superlattices that host a wide range of new physical effects such as the creation of secondary Dirac points and band gap opening. A delicate control of the twist angle between the two layers is required as the effects weaken or disappear at large twist angles. In this Letter, we show that these effects can be reinstated in large-angle (~1.8°) graphene/h-BN moiré superlattices under high pressures. Additionally, a graphene/h-BN moiré superlattice microdevice is fabricated directly on the diamond culet of a diamond anvil cell, where pressure up to 8.3 GPa is applied. The band gap at the primary Dirac point is opened by 40-60 meV, and fingerprints of the second Dirac band gap are also observed in the valence band. Theoretical calculations confirm the band engineering with pressure in large-angle graphene/h-BN bilayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-Order Fractal Quantum Oscillations in Graphene/BN Superlattices in the Extreme Doping Limit

Recent studies of van der Waals (vdW) heterostructures and superlattices have shown intriguing quantum phenomena, but these have been largely explored only in the moderate carrier density regime. Here, we report the probe of high-temperature fractal Brown-Zak (BZ) quantum oscillations through magnetotransport in the extreme doping regimes by applying a newly developed electron beam doping technique. Further, this technique gives access to both ultrahigh electron and hole densities beyond the dielectric breakdown limit in graphene/BN superlattices, enabling the observation of nonmonotonic carrier-density dependence of fractal BZ states and up to fourth-order fractal BZ features despite strong electron-hole asymmetry. Theoretical tight-binding simulations qualitatively reproduce all observed fractal BZ features and attribute the nonmonotonic dependence to the weakening of superlattice effects at high carrier densities.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Revealing the two-dimensional electronic structure and anisotropic superconductivity in a natural van der Waals superlattice (PbSe) 1.14 NbSe 2

Van der Waals superlattices are important for tailoring the electronic structures and properties of layered materials. Here we report the superconducting properties and electronic structure of a natural van der Waals superlattice (PbSe) 1.14 NbSe 2 . Anisotropic superconductivity with a transition temperature T c = 5.6 ± 0.1 K, which is higher than monolayer NbSe 2 , is revealed by transport measurements on high-quality samples. Angle-resolved photoemission spectroscopy (ARPES) measurements reveal the two-dimensional electronic structure and a charge transfer of 0.43 electrons per NbSe 2 unit cell from the blocking PbSe layer. In addition, polarization-dependent ARPES measurements reveal a significant circular dichroism with opposite contrast at K and K' valleys, suggesting a significant spin-orbital coupling and distinct orbital angular momentum. In conclusion, our work suggests natural van der Waals superlattice as an effective pathway for achieving intriguing properties distinct from both the bulk and monolayer samples.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Nematicity with a twist: Rotational symmetry breaking in a moiré superlattice

Motivated by recent reports of nematic order in twisted bilayer graphene (TBG), we investigate the impact of the triangular moiré superlattice degrees of freedom on nematicity. In TBG, the nematic order parameter is not Ising like, as in tetragonal crystals, but has a three-state Potts character related to the threefold rotational symmetry ( C 3 z ) of the moiré superlattice. We find that, even in the presence of static strain that explicitly breaks the C 3 z symmetry, the system can still undergo a nematic-flop phase transition that spontaneously breaks in-plane twofold rotations. Moreover, elastic fluctuations, manifested as acoustic phonons, mediate a nemato-orbital coupling that ties the nematic director orientation to certain soft directions in momentum space, rendering the Potts-nematic transition mean field and first order. In contrast to the case of rigid crystals, the Fermi surface hot spots associated with these soft directions are maximally coupled to low-energy nematic fluctuations in the moiré superlattice case.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Visualizing electron localization of WS 2 /WSe 2 moiré superlattices in momentum space

The search for materials with flat electronic bands continues due to their potential to drive strong correlation and symmetry breaking orders. Electronic moirés formed in van der Waals heterostructures have proved to be an ideal platform. However, there is no holistic experimental picture for how superlattices modify electronic structure. By combining spatially resolved angle-resolved photoemission spectroscopy with optical spectroscopy, we report the first direct evidence of how strongly correlated phases evolve from a weakly interacting regime in a transition metal dichalcogenide superlattice. By comparing short and long wave vector moirés, we find that the electronic structure evolves into a highly localized regime with increasingly flat bands and renormalized effective mass. The flattening is accompanied by the opening of a large gap in the spectral function and splitting of the exciton peaks. These results advance our understanding of emerging phases in moiré superlattices and point to the importance of interlayer physics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

DNA-mediated assembly of Au bipyramids into anisotropic light emitting kagome superlattices

Colloidal crystal engineering with DNA allows one to design diverse superlattices with tunable lattice symmetry, composition, and spacing. Most of these structures follow the complementary contact model, maximizing DNA hybridization on building blocks and producing relatively close-packed lattices. Here, low-symmetry kagome superlattices are assembled from DNA-modified gold bipyramids that can engage only in partial DNA surface matching. The bipyramid dimensions and DNA length can be engineered for two different superlattices with rhombohedral unit cells, including one composed of a periodic stacking of kagome lattices. Enabled by the partial facet alignment, the kagome lattices exhibit lattice distortion, bipyramid twisting, and planar chirality. When conjugated with Cy-5 dyes, the kagome lattices serve as cavities with high-density optical states and large Purcell factors along lateral directions, leading to strong dipole radiation along thezaxis and facet-dependent light emission. Such complex optical properties make these materials attractive for lasers, displays, and quantum sensing constructs.

Science & Technology - Other Topics↗
DOE OSTI2023

Correlated insulator of excitons in WSe 2 /WS 2 moiré superlattices

A panoply of unconventional electronic states has been observed in moiré superlattices. Engineering similar bosonic phases remains, however, largely unexplored. We report the observation of a bosonic correlated insulator in tungsten diselenide/tungsten disulfide (WSe 2 /WS 2 ) moiré superlattices composed of excitons, that is, tightly bound electron-hole pairs. We develop a pump probe spectroscopy method that we use to observe an exciton incompressible state at exciton filling ν ex = 1 and charge neutrality, indicating a correlated insulator of excitons. With varying charge density, the bosonic correlated insulator continuously transitions into an electron correlated insulator at charge filling ν e = 1, suggesting a mixed correlated insulating state between the two limits. Our studies establish semiconducting moiré superlattices as an intriguing platform for engineering bosonic phases.

Science & Technology - Other Topics↗
DOE OSTI2026

Stabilizing in-transition phases of superlattices through shape control of silver nanocrystals

In nanoscale assemblies, observations of structures in the transition pathways between high-symmetry lattices are rare because of the inherent instability of the intermediate phases. Here, we report that silver nanocrystals with shapes similar to truncated octahedra (mecons) self-assemble into superlattices that are stable and resemble a previously unobserved phase that bridges face-centered and body-centered cubic structures along the Nishiyama-Wassermann martensitic pathway. These superlattices exhibited high structural purity and stability and created a robust and tunable dissymmetric phase landscape. Notably, light-matter coupling emerged in these silver nanocrystal superlattices through plasmon-photon hybridization at the quantum level.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Site-specific spectroscopic measurement of spin and charge in (LuFeO3)m/(LuFe2O4)1 multiferroic superlattices

Abstract Interface materials offer a means to achieve electrical control of ferrimagnetism at room temperature as was recently demonstrated in (LuFeO 3 ) m /(LuFe 2 O 4 ) 1 superlattices. A challenge to understanding the inner workings of these complex magnetoelectric multiferroics is the multitude of distinct Fe centres and their associated environments. This is because macroscopic techniques characterize average responses rather than the role of individual iron centres. Here, we combine optical absorption, magnetic circular dichroism and first-principles calculations to uncover the origin of high-temperature magnetism in these superlattices and the charge-ordering pattern in the m = 3 member. In a significant conceptual advance, interface spectra establish how Lu-layer distortion selectively enhances the Fe 2+ → Fe 3+ charge-transfer contribution in the spin-up channel, strengthens the exchange interactions and increases the Curie temperature. Comparison of predicted and measured spectra also identifies a non-polar charge ordering arrangement in the LuFe 2 O 4 layer. This site-specific spectroscopic approach opens the door to understanding engineered materials with multiple metal centres and strong entanglement.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Record quantum efficiency from strain compensated superlattice GaAs/GaAsP photocathode for spin polarized electron source

Photocathodes based on GaAs and other III–V semiconductors are capable of producing highly spin-polarized electron beams. GaAs/GaAsP superlattice photocathodes exhibit high spin polarization; however, the quantum efficiency (QE) is limited to 1% or less. To increase the QE, we fabricated a GaAs/GaAsP superlattice photocathode with a Distributed Bragg Reflector (DBR) underneath. This configuration creates a Fabry–Pérot cavity between the DBR and GaAs surface, which enhances the absorption of incident light and, consequently, the QE. These photocathode structures were grown using molecular beam epitaxy and achieved record quantum efficiencies exceeding 15% and electron spin polarization of about 75% when illuminated with near-bandgap photon energies.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Unraveling Strain Gradient Induced Electromechanical Coupling in Twisted Double Bilayer Graphene Moiré Superlattices

Moiré superlattices of 2D materials with a small twist angle are thought to exhibit appreciable flexoelectric effect, though unambiguous confirmation of their flexoelectricity is challenging due to artifacts associated with commonly used piezoresponse force microscopy (PFM). For example, unexpectedly small phase contrast (≈8°) between opposite flexoelectric polarizations is reported in twisted bilayer graphene (tBG), though theoretically predicted value is 180°. We report a methodology is developed to extract intrinsic moiré flexoelectricity using twisted double bilayer graphene (tDBG) as a model system, probed by lateral PFM. For small twist angle samples, it is found that a vectorial decomposition is essential to recover the small intrinsic flexoelectric response at domain walls from a large background signal. The obtained threefold symmetry of commensurate domains with significant flexoelectric response at domain walls is fully consistent with the theoretical calculations. Incommensurate domains in tDBG with relatively large twist angles can also be observed by this technique. A general strategy is provided here for unraveling intrinsic flexoelectricity in van der Waals moiré superlattices while providing insights into engineered symmetry breaking in centrosymmetric materials.

36 MATERIALS SCIENCE↗