Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Direct graphene growth on (111) Cu2O templates with atomic Cu surface layer

This work explores nucleation and epitaxy of graphene on crystalline Cu2O templates formed via self assembly and surface reduction of Cu2O nanocrystallites on the cubic textured (100) orientation Cu (CTO-Cu) and polycrystalline Cu (poly-Cu) substrates, respectively. It has been found that the presence of sub-surface oxygen causes the reconstruction of Cu surface due to the formation of oriented Cu2O nanocrystallites at a low H2 gas flow. Self-assembly of the Cu2O nanocrystallites into a textured surface template provides direct nucleation sites for graphene growth after the oxygen-sublattice on the template surface is reduced. The atomic Cu surface layer provides advantages of high graphene growth rate due to the catalytic role of Cu and in-plane alignment of graphene nuclei. It is particularly important that the Cu2O crystallites have predominantly (111) orientation aligned to each other in the plane of the (100) CTO-Cu substrates, which allows epitaxy of graphene with much lower defect density as compared to that in the poly-Cu case. Since Cu2O (111) templates may be developed on lattice matched (100) surfaces of other dielectric materials, this self-assembly approach provides a promising pathway for large-scale, transfer free graphene epitaxy on nonmetallic surfaces.

Liu, Jianwei↗

Surface Energy Modulated Self‐Assembly of Percolative Gallium Nanodroplet Films for Stretchable Electronics

Advancements in soft robotics and wearable technologies have led to an increased need for flexible and stretchable electronic systems. Liquid metals like Gallium (Ga) and its alloys offer high potential in the field of stretchable electronics and photonics due to their inherent high conductivity and malleability. However, their high surface tension and native oxide formation hinder uniform wetting and continuous film formation to get conducting films. Here, we report a fabrication strategy to realize electrically conductive Ga thin films with effective thicknesses around 100 nm on polymeric and elastomeric substrates. By enhancing the surface energy of the elastomer, we create uniform Ga nanodroplets capable of sustaining stretchability up to 200% strain. Our devices exhibit electronic conduction primarily through tunneling and display strain tunable piezoresistive characteristics, which are explained using Kirchhoff's resistive network and Simmon's analytical tunneling current model. To showcase the device's capability in fields of stretchable electronics, we demonstrate several functional prototypes, including flexible devices integrated with Light Emitting Diodes (LEDs), curvature and pressure sensors, and soft robotic grippers capable of sensing object curvature. The demonstrated devices highlight the potential of this approach for scalable integration of stretchable electronics in soft robotic and wearable platforms.

42 ENGINEERING↗

Powered protrusion cutter

An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

Bzorgi, Fariborz M↗

Device for cutting protrusions

An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

47 OTHER INSTRUMENTATION↗

Fine golden rings: Tunable surface plasmon resonance from assembled nanorods in topological defects of liquid crystals

Unprecedented, reversible, and dynamic control over an assembly of gold nanorods dispersed in liquid crystals (LC) is demonstrated. The LC director field is dynamically tuned at the nanoscale using microscale ring confinement through the interplay of elastic energy at different temperatures, thus fine-tuning its core replacement energy to reversibly sequester nanoscale inclusions at the microscale. As a result, this leads to shifts of 100 nm or more in the surface plasmon resonance peak, an order of magnitude greater than any previous work with AuNR composites.

36 MATERIALS SCIENCE↗

Bio-inspired nanocomposite by layer-by-layer coating of chitosan/hyaluronic acid multilayers on a hard nanocellulose-hydroxyapatite matrix

We report on a layer-by-layer technique on the hard CNCs/hydroxyapatite (HAP) matrix using biodegradable and biocompatible chitosan and hyaluronic acid (HA). Inspired by the mineralized collagen in human bone, the CNCs/HAP matrix was synthesized by a facile in situ HAP coating on the CNCs fibers. The chemical and crystalline structure of the CNCs/HAP matrix was investigated with FTIR, XRD, HRTEM, and SAED. The surface of the CNCs/HAP matrix was analyzed by AFM which showed a flat structure with a roughness of 23.12 nm, however, the surface roughness increased to 56.09 nm with the assembly of chitosan and HA. After the LBL assembly, the surface hydrophilicity of the CNCs/HAP films was improved. Furthermore, the CNCs/HAP matrix showed enhanced mechanical property than pure CNCs matrix. Although there is compromise in the mechanical property after the LBL assembly, it is anticipated its bioaffinity and biocompatibility will increase with the incoporation of chitosan and HA.

36 MATERIALS SCIENCE↗

Dithiocarbamate Self-Assembled Monolayers as Efficient Surface Modifiers for Low Work Function Noble Metals

Tuning the work function of the electrode is one of the crucial steps to improve charge extraction in organic electronic devices. Here, we show that N,N-dialkyl dithiocarbamates (DTC) can be effectively employed to produce low work function noble metal electrodes. Work functions between 3.1 and 3.5 eV are observed for all metals investigated (Cu, Ag, and Au). Ultraviolet photoemission spectroscopy (UPS) reveals a maximum decrease in work function by 2.1 eV as compared to the bare metal surface. Electronic structure calculations elucidate how the complex interplay between intrinsic dipoles and dipoles induced by bond formation generates such large work function shifts. Subsequently, we quantify the improvement in contact resistance of organic thin film transistor devices with DTC coated source and drain electrodes. These findings demonstrate that DTC molecules can be employed as universal surface modifiers to produce stable electrodes for electron injection in high performance hybrid organic optoelectronics.

36 MATERIALS SCIENCE↗

Structural rearrangements in self-assembled surfactant layers at surfaces

The transition from compact to extended configuration in ionic surfactant layers under the influence of salt, surfactant surface density and temperature is studied using the classical density functional theory (cDFT). The increase in ionic strength of aqueous salt solution or in surfactant surface density leads to the transition from the hemicylindrical to the perpendicular monolayer configuration of the molecules. Although producing the same structural rearrangement in the surfactant layer the origin of the effect of salt and surface density is different. While the addition of salt increases the out-of-plane attractive interactions with the solvent, the increase in density results in the increase in the in-plane repulsion in surfactant layer. The temperature effects are subtler and are mainly manifested in the reduction of the solution structuring at elevated temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arrays of ultrathin silicon solar microcells

Provided are solar cells, photovoltaics and related methods for making solar cells, wherein the solar cell is made of ultrathin solar grade or low quality silicon. In an aspect, the invention is a method of making a solar cell by providing a solar cell substrate having a receiving surface and assembling a printable semiconductor element on the receiving surface of the substrate via contact printing. The semiconductor element has a thickness that is less than or equal to 100 .mu.m and, for example, is made from low grade Si.

14 SOLAR ENERGY↗

Arrays of ultrathin silicon solar microcells

Provided are solar cells, photovoltaics and related methods for making solar cells, wherein the solar cell is made of ultrathin solar grade or low quality silicon. In an aspect, the invention is a method of making a solar cell by providing a solar cell substrate having a receiving surface and assembling a printable semiconductor element on the receiving surface of the substrate via contact printing. The semiconductor element has a thickness that is less than or equal to 100 .mu.m and, for example, is made from low grade Si.

14 SOLAR ENERGY↗