Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface functionalization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Functionalized Silicon Particles for Enhanced Half- and Full-Cell Cycling of Si-Based Li-Ion Batteries

Vinylene carbonate (VC) and polyethylene oxide (PEO) have been investigated as functional agents that mimic the solid electrolyte interphase (SEI) chemistry of silicon (Si). VC and PEO are known to contribute to the stability of Si-based lithium-ion batteries as an electrolyte additive and as a SEI component, respectively. In this work, covalent surface functionalization was achieved via a facile route, which involves ball-milling the Si particles with sacrificial VC and PEO. Thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy indicate that the additives are strongly bound to Si. In particular, MAS NMR shows Si–R or Si–O–R groups, which confirm functionalization of the Si after milling in VC or PEO. Particle size analysis by dynamic light scattering reveals that the additives facilitate particle size reduction and that the functionalized particles result in more stable dispersions based on zeta potential measurements. Raman mapping of the electrodes fabricated from the VC and PEO-coated active material with a polyacrylic acid (PAA) binder reveals a more homogenous distribution of Si and the carbon conductive additive compared to the electrodes prepared from the neat Si. Furthermore, the VC-milled Si strikingly exhibited the highest capacity in both half- and full-cell configurations, with more than 200 mAh g –1 measured capacity compared to the neat Si in the half-cell format. This is linked to an improved electrode processing based on the Raman and zeta potential measurements as well as a thinner SEI (with more organic components for the functionalized Si relative to the neat Si) based on XPS analysis of the cycled electrodes. In conclusion, the effect of binder was also investigated by comparing PAA with P84 (polyimide type), where an increased capacity is observed in the latter case.

25 ENERGY STORAGE↗
DOE OSTI2021

Bioinspired nonwetting surfaces for corrosion inhibition over a range of temperature and corrosivity

Applications of superhydrophobic (SHS) and lubricant infused surfaces (LIS) involve exposure to corrosive environments from the acidic to the basic, at a range of temperatures, that are not fully characterized. Here, we present for the first time a multifactorial study of the effects of surface fabrication method, surface modification, surface functionalization time, temperature and pH of the immersion medium on the corrosion performance of nonwetting copper surfaces. Bioinspired SHS and LIS fabricated using facile methods of etching and electrodeposition are systematically assessed using potentiodynamic polarization measurements for their corrosion resistance in saline solution (pH ≈7) over a temperature range 23–85°C. SHS and LIS are shown to exhibit diminished corrosion rate, by up to two orders of magnitude, compared to bare copper surface. An Arrhenius model is developed for the first time, describing the temperature- dependent corrosion rate of SHS and LIS. Electrochemical impedance spectroscopy is used to show that corrosion resistance of LIS is larger by three orders of magnitude in extremely acidic (pH = 1) and by an order magnitude in extremely alkaline (pH = 14) media compared to bare copper surface. Etched LIS are generally more resistant to corrosion compared to SHS at all temperatures with excellent microstructural durability.

42 ENGINEERING↗
DOE OSTI2021

Construction of Lattice Strain in Bimetallic Nanostructures and Its Effectiveness in Electrochemical Applications

Bimetallic nanocrystals (NCs), associated with various surface functions such as ligand effect, ensemble effect, and strain effect, exhibit superior electrocatalytic properties. The stress-induced surface strain effect can alter binding strength between the surface active sites and reactants as well as their intermediates, and the electrochemical performance of bimetallic NCs can be significantly facilitated by the lattice-strain modification via their morphologies, sizes, shell-thickness, surface defectiveness as well as compositions. Here in this review, an overview of fundamental principles, characterization techniques, and quantitative determination of the surface lattice strain is provided. Various strategies and synthesis efforts on creating lattice-strain-engineered bimetallic NCs, including the de-alloying process, atomic layer-by-layer deposition, thermal treatment evolution, one-pot synthesis, and other efforts are also discussed. It is further outlined how the lattice strain effect promotes electrochemical catalysis through the selected case studies. The reactions on oxygen reduction reaction, small molecular oxidation, water splitting reaction, and electrochemical carbon dioxide reduction reactions are focused. In particular, studies of lattice strain arisen from core–shell nanostructure and defectiveness are highlighted. Lastly, the potential challenges are summarized and the prospects of lattice-strain-based engineering on bimetallic nanocatalysts with suggestion and guidance of the future electrocatalyst design are envisioned.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Self Assembled Monolayers for Passivated Contacts

Passivated contacts mitigate defects typically encountered due metallization of solar cells. We deposit amorphous silicon (a-Si:H) on an oxidized silicon wafer via PECVD and anneal at high temperature to crystallize into polysilicon passivated contact. One drawback is the absorption of the polysilicon between grid fingers, so removal of this material is desirable to maximize Jsc. Alternatively, interdigitated back contact cells rely on a gap between n- and p- fingers, which is commonly etched to ensure electronic isolation. We utilize a self assembled monolayer (SAM) using hexamethyldisilazane (HMDS) as a precursor to pattern and etch amorphous silicon (a-Si:H) and polysilicon without the need for photoresist. Ultraviolet light exposure oxidizes the HMDS by photocleaving the organic groups [1] of the SAM leaving a patterned SiO2. Directly soaking this in TMAH will eventually etch the SAM and the silicon, where the SiO2 serves as an etch mask. Inversely, a dilute HF dip selectively etches this SiO2 and the SAM remains. A subsequent soak in TMAH selectively etches the underlying silicon, where the SAM serves as an etch mask. Importantly, we find that the SAM can remain intact for metallization, where we measure 10 mO-cm2 specific contact resistivity on n-type polysilicon.

passivation↗
DOE OSTI2024

Thiol-Functionalized Adsorbents through Atomic Layer Deposition and Vapor-Phase Silanization for Heavy Metal Ion Removal

The removal of toxic heavy metal ions from water resources is crucial for environmental protection and public health. In this study, we address this challenge by developing a surface functionalization technique for the selective adsorption of these contaminants. Our approach involves atomic layer deposition (ALD) followed by vapor-phase silanization of porous substrates. We utilized porous silica gel powder (similar to 100 mu m particles, 89 m 2 /g surface area, similar to 30 nm pores) as an initial substrate. This powder was first coated with similar to 0.5 nm ALD Al 2 O 3 , followed by vapor-phase grafting of a thiol-functional silane. The modified powder, particularly in acidic conditions (pH = 4), showed high selectivity in adsorbing Cd(II), As(V), Pb(II), Hg(II), and Cu(II) heavy metal ions in mixed ion solutions over common benign ions (e.g., Na, K, Ca, and Mg). Langmuir adsorption isotherms and breakthrough adsorption studies were conducted to assess heavy metal binding affinity and revealed the order of Cd(II) < Pb(II) < Cu(II) < As(V) < Hg(II), with a significantly higher affinity for As(V) and Hg(II) ions. Time-dependent uptake studies demonstrated rapid removal of heavy metal ions from aqueous environments, with Hg(II) exhibiting the fastest adsorption kinetics on thiol-modified surfaces. Finally, these findings highlight the potential of ALD and vapor-phase silanization to create effective adsorbents for the targeted removal of hazardous contaminants from water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Molecularly Functionalized Electrodes for Efficient Electrochemical Water Remediation

Here, the development and investigation of materials that leverage unique interfacial effects on electronic structure and redox chemistry are likely to play an outstanding role in advanced technologies for wastewater treatment. Here, the use of surface functionalization of metal oxides with a Ru(II)poly(pyridyl) complex was reported as a way to create hybrid assemblies with optimized electrochemical performance for water remediation, superior to those that could be achieved with the molecular catalyst or metal-oxide electrodes used individually. Mechanistic analysis demonstrated that the molecularly functionalized electrodes could suppress the formation of hydroxyl radicals (i. e., the dominant remediation pathway for bare metal-oxide electrodes), allowing the water remediation to proceed through the highly oxidizing Ru 3+ ions in the surface-bound complexes. Furthermore, the underlying metal-oxide substrates played a crucial role in altering the electronic structure and electrochemical properties of the surface-bound catalyst, such that the competing side reaction (i. e., water splitting) was largely inhibited.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Quantum Sensing in Micro-Architected Scaffolds

Quantum sensing with nitrogen-vacancy centers in diamond has emerged as a powerful tool for measuring diverse physical parameters, yet the versatility of these measurement approaches is often limited by the achievable layout and dimensionality of bulk-crystal platforms. Here, in this study, we demonstrate a versatile approach to creating designer quantum sensors by surface-functionalizing multiphoton lithography microstructures with NV-containing nanodiamonds. We showcase this capability by fabricating a 150 μm × 150 μm × 150 μm triply periodic minimal surface gyroid structure with millions of attached nanodiamonds. We demonstrate a means to volumetrically image these structures using a refractive index matching confocal imaging technique and extract ODMR spectra from 1.86 μm × 1.86 μm areas of highly concentrated nanodiamonds across a cross-section of the gyroid. Furthermore, the high density of sensing elements enables ensemble temperature measurements with a sensitivity of 0.548 ± 0.084 K/√Hz at 5 mW excitation power. This approach to creating quantum-enabled microarchitectures opens new possibilities for multimodal sensing in complex three-dimensional environments.

Materials science↗
DOE OSTI2023

In Situ Attenuated Total Reflectance Infrared Spectroelectrochemistry (ATR-IR-SEC) for the Characterization of Molecular Redox Processes on Surface-Proximal Doped Silicon ATR Crystal Working Electrodes

In situ mid-infrared spectroscopy is a powerful technique for understanding the mechanism of CO 2 reduction (CO 2 R) catalysts because it enables the direct detection of catalytic intermediates and products. Moreover, spectroelectrochemistry (SEC), the coupling of spectroscopy with electrochemistry, allows spectroscopic changes to be correlated with applied potentials to reveal potential-dependent intermediates that are often relevant to photoelectrochemical reactions. Hybrid photoelectrodes, comprised of a narrow bandgap semiconductor, like silicon (Si), with a covalently-linked molecular catalyst, are a promising platform for sunlight-driven catalysis, but characterization of the catalytic mechanism(s) is challenging under photoelectrochemical conditions, particularly when the catalyst is present in monolayer or less concentrations. Here, we have developed a new strategy to use multiple-reflection attenuated total reflectance IR spectroscopy (ATR-IR) coupled with electrochemistry to characterize catalysts directly integrated with a semiconductor surface under applied potential. We show that by surface-proximal n-type or p-type doping of the top ~100-200 nm of the crystal surface, Si ATR crystals can be used simultaneously as the internal reflection element and semiconductor working electrode for ATR-IR-SEC measurements. The surface-proximal doping strategy yields a quasi-equipotential surface with excellent infrared transparency that would have been compromised by free carrier absorption if the crystal was uniformly doped. This approach permits the catalytically-active functionalized surface to be directly probed without modification and overcomes signal-to-noise limitations of other strategies that use separately deposited working electrodes on Si ATR crystals. Proof-of-concept ATR-IR-SEC spectra were collected during the reduction and oxidation of monolayers of Re- and Ru-based transition metal carbonyl complexes, respectively, verifying the viability of the technique to probe redox processes associated with CO 2 R catalysts on Si electrode surfaces with high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Adhesion of impure ice on surfaces

The undesirable buildup of ice can compromise the operational safety of ships in the Arctic to high-flying airplanes, thereby having a detrimental impact on modern life in cold climates. The obstinately strong adhesion between ice and most functional surfaces makes ice removal an energetically expensive and dangerous affair. Hence, over the past few decades, substantial efforts have been directed toward the development of passive ice-shedding surfaces. Conventionally, such research on ice adhesion has almost always been based on ice solidified from pure water. However, in all practical situations, freezing water has dissolved contaminants; ice adhesion studies of which have remained elusive thus far. Here, in this work, we cast light on the fundamental role played by various impurities (salt, surfactant, and solvent) commonly found in natural water bodies on the adhesion of ice on common structural materials. We elucidate how varying freezing temperature & contaminant concentration can significantly alter the resultant ice adhesion strength making it either super-slippery or fiercely adherent. The entrapment of impurities in ice changes with the rate of freezing and ensuing adhesion strength increases as the cooling temperature decreases. We discuss the possible role played by the in situ generated solute enriched liquid layer and the nanometric water-like disordered ice layer sandwiched between ice and the substrate behind these observations. Our work provides useful insights into the elementary nature of impure water-to-ice transformation and contributes to the knowledge base of various natural phenomena and rational design of a broad spectrum of anti-icing technologies for transportation, infrastructure, and energy systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Metrology of a Focusing Capillary Using Optical Ptychography

The focusing property of an ellipsoidal monocapillary has been characterized using the ptychography method with a 405 nm laser beam. The recovered wavefront gives a 12.5×10.4μm 2 focus. The reconstructed phase profile of the focused beam can be used to estimate the height error of the capillary surface. The obtained height error shows a Gaussian distribution with a standard deviation of 1.3 μm. This approach can be used as a quantitative tool for evaluating the inner functional surfaces of reflective optics, complementary to conventional metrology methods.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Quantum Spin-Valley Hall Kink States: From Concept to Materials Design

We propose a general and tunable platform to realize high-density arrays of quantum spin-valley Hall kink (QSVHK) states with spin-valley-momentum locking based on a two-dimensional hexagonal topological insulator. Through the analysis of Berry curvature and topological charge, the QSVHK states are found to be topologically protected by the valley-inversion and time-reversal symmetries. Remarkably, the conductance of QSVHK states remains quantized against both nonmagnetic short- and long-range and magnetic long-range disorder, verified by the Green-function calculations. Based on first-principles results and our fabricated samples, we show that QSVHK states, protected with a gap up to 287 meV, can be realized in bismuthene by alloy engineering, surface functionalization, or electric field, supporting nonvolatile applications of spin-valley filters, valves, and waveguides even at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Direct strain correlations at the single-atom level in three-dimensional core-shell interface structures

Abstract Nanomaterials with core-shell architectures are prominent examples of strain-engineered materials. The lattice mismatch between the core and shell materials can cause strong interface strain, which affects the surface structures. Therefore, surface functional properties such as catalytic activities can be designed by fine-tuning the misfit strain at the interface. To precisely control the core-shell effect, it is essential to understand how the surface and interface strains are related at the atomic scale. Here, we elucidate the surface-interface strain relations by determining the full 3D atomic structure of Pd@Pt core-shell nanoparticles at the single-atom level via atomic electron tomography. Full 3D displacement fields and strain profiles of core-shell nanoparticles were obtained, which revealed a direct correlation between the surface and interface strain. The strain distributions show a strong shape-dependent anisotropy, whose nature was further corroborated by molecular statics simulations. From the observed surface strains, the surface oxygen reduction reaction activities were predicted. These findings give a deep understanding of structure-property relationships in strain-engineerable core-shell systems, which can lead to direct control over the resulting catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Isopotential Electron Titration of Ammonia Charge Transfer on Metal Catalysts

Electron transfer between adsorbates and surfaces determines the binding strength and reactivity of chemical moieties on materials designed for separations and catalysis. To quantify electron exchange, the extent of charge transfer resulting from ammonia adsorption on a Ru surface was measured by isopotential electron titration (IET) on a Ru catalytic condenser, where isopotential conditions were maintained between Ru and silicon separated by an insulating HfO 2 layer during gas phase ammonia adsorption. Charge transfer upon ammonia adsorption on a Ru catalytic condenser increased from 40 to 1200 nC/cm 2 at 75 and 225 °C, respectively. Charge transfer measurements provided a direct estimate of ammonia adsorption thermodynamics on Ru without knowing surface coverages a priori, revealing an adsorption enthalpy of −53 ± 10 kJ/mol and entropy of −61 ± 26 J/mol·K. Combining experimentally-measured charge transfer with kinetic Monte Carlo simulations informed adsorbate surface coverages determined that 0.058 electrons were transferred to the Ru surface for each molecular ammonia adsorption event (δ NH 3 = 0.058 ± 0.005 e – /NH 3 *), consistent with calculated Bader charges. The ability to measure the extent of charge transfer for adsorbed species provides a fundamental descriptor to understand existing and new chemically functional surfaces, providing a foundational method for the emerging field of thermochemical surface coulometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A Novel Experimental Approach to Understand the Transport of Nanodrugs

Nanoparticle-based drugs offer attractive advantages like targeted delivery to the diseased site and size and shape-controlled properties. Therefore, understanding the particulate flow of the nanodrugs is important for effective delivery, accurate prediction of required dosage, and developing efficient drug delivery platforms for nanodrugs. In this study, the transport of nanodrugs including flow velocity and deposition is investigated using three model metal oxide nanodrugs of different sizes including iron oxide, zinc oxide, and combined Cu-Zn-Fe oxide synthesized via a modified polyol approach. The hydrodynamic size, size, morphology, chemical composition, crystal phase, and surface functional groups of the water-soluble nanodrugs were characterized via dynamic light scattering, transmission electron microscopy, scanning electron microscopy-energy dispersive X-ray, X-ray diffraction, and fourier transform infrared spectroscopy, respectively. Two different biomimetic flow channels with customized surfaces are developed via 3D printing to experimentally monitor the velocity and deposition of the different nanodrugs. A diffusion dominated mechanism of flow is seen in size ranges 92 nm to 110 nm of the nanodrugs, from the experimental velocity and mass loss profiles. The flow velocity analysis also shows that the transport of nanodrugs is controlled by sedimentation processes in the larger size ranges of 110–302 nm. However, the combined overview from experimental mass loss and velocity trends indicates presence of both diffusive and sedimentation forces in the 110–302 nm size ranges. It is also discovered that the nanodrugs with higher positive surface charges are transported faster through the two test channels, which also leads to lower deposition of these nanodrugs on the walls of the flow channels. The results from this study will be valuable in realizing reliable and cost-effective in vitro experimental approaches that can support in vivo methods to predict the flow of new nanodrugs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantum sensing of paramagnetic analytes by nanodiamonds in levitated microdroplets and aqueous solutions

Nanodiamonds (ND) hosting negatively charged nitrogen-vacancy (NV-) color centers have received attention for applications in magnetic field, electric field, chemical, and bio-sensing. The versatility of these probes is their excellent room-temperature optical and spin properties, along with their small size, functionalized surfaces and resistance to bleaching, making them ideal as nanoscopic sensors in picoliter volumes (e.g. single cells, but also microcompartments and aerosols). For quantitative ND-NV- sensing of paramagnetic analytes in such contexts, however, there remains an incomplete understanding of how factors related to the aqueous phase environment control detection efficiency. To address this, optically detected magnetic resonance (ODMR) is measured in bulk macroscale solutions and single levitated microdroplets as a function of Gd+3 concentration (340 nM to 1.5 mM), nanodiamond size, pH, competitor ions, and ligands. The ODMR response to [Gd+3] is found to be nonlinear, and pH, ND and sample volume dependent; indicating the detection of Gd+3 requires efficient adsorption of the analyte to the diamond surface. Langmuir adsorption isotherms embedded in a quantitative photophysical model links the ODMR response to adsorption thermodynamics of Gd+3. The equilibrium constant for Gd+3 adsorption to a carboxylated ND surface is determined to be (1 ± 0.5) x 105 M-1 corresponding to a free energy of adsorption of (-28 ± 1) kJ mol-1. These results provide general insight into how complex aqueous and microscale environments impact nanodiamond based quantum sensing modalities, and portend their application as quantitative chemical sensors in microenvironments.

Brown, Emily K↗
DOE OSTI2022

n-Type doping of a solution processed p-type semiconductor using isoelectronic surface dopants for homojunction fabrication

The p-n junction is one of the fundamental requirements for a practical semiconductor-based electronic device. Designing a heterojunction comprising of dissimilar p-type and n-type semiconductors calls for careful energy level considerations, both when selecting the semiconductor materials as well as the metal contacts. A homojunction based on a single semiconductor simplifies this task, as energy levels of the p-type and n-type materials are already fairly similar, allowing for easier selection of contacts. Traditionally, homojunctions rely on doping of a bulk semiconductor to achieve p- and n-type transport through controlled addition of aliovalent dopants via energy-intensive processes such as ion implantation or thermal annealing. Exact control of doping in nanocrystalline semiconductors is significantly more challenging, due to self-purification effects. However, owing to their large surface areas, surface moieties can be utilized to both dope the nanostructures as well as tune their energy levels. Here, we present a facile technique based on an isoelectronic surface dopant in order to achieve p- and n-type materials based on the same semiconductor. We show that thin p-type colloidal Bi 2 Te 3 nanowires can be switched to n-type through surface functionalization, thus increasing the availability of new nanocrystalline solution-processable p-n homojunctions.

42 ENGINEERING↗
DOE OSTI2022

Enhanced Carbon Capture Behavior of Carbon Fibers via Ionic Liquid Modification

Carbon-based materials are widely deployed in carbon capture but are only limited to physisorption procedures. Further extending functionalized carbon materials to CO 2 chemisorption under low CO 2 concentration is highly desirable yet challenging. In this study, a carbon fiber composed of solely ultra-micropores (~0.45 nm) was deployed as the precursor to avoid the pore blocking effect, which was modified by superbase-derived ionic liquids (ILs) containing strong interaction sites with CO 2 . By forming a thin coating layer on the surface, the as-afforded surface-functionalized fiber materials demonstrated enhanced CO 2 uptake capacity and improved CO 2 sorption kinetics, as evaluated by both the volumetric method and thermogravimetric analysis, as well as the calculated energy distribution curves. The achievements made in this work provide guidance on the functionalization of carbon-based materials towards enhanced CO 2 chemisorption by forming a thin layer of selected IL coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗