Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Continuous Counter‐Current Microfluidic Liquid–Liquid Extraction Achieved Using a Pair of Wettable Screen Meshes

Continuous counter‐current microfluidic liquid–liquid extraction performs separations by flowing immiscible liquids in opposing directions within a single flow channel. In principle, this flow arrangement enables a large number of theoretical separation units in a small footprint, without using interstage valving, pumping, and phase separation. Despite its potential for excellent separation performance, this microfluidic scheme rarely appears in literature due to the requirement for capillary forces to be greater than hydrodynamic forces for stable flow. We present a novel microfluidic device and flow approaches that overcome this force‐balance challenge, enabling stable, long‐duration continuous counter‐current flow. Additionally, we cover a suite of methodologies for quantifying the performance of the microfluidic device, revealing the number of theoretical equilibrium stages achieved. The enabling technologies include a woven mesh screen‐based microfluidic device architecture that is easily fabricated outside of a clean room, surface functionalization strategies to promote conjugate (organic/aqueous) wettability, flow approaches to eliminate bubbles and carryover, and computer‐aided flow automation with optical measurement of extraction performance. The reported experiments lasted for over 36 h, terminated only at experiment conclusion, where the device still exhibited good performance. Automated Raman spectroscopy was used for solute quantitation of the ternary system tert‐butanol in a toluene/water matrix, a ternary system that was specifically chosen to analyze the device's performance with a small solute partition ratio and to enable in‐line Raman measurements of solute concentrations in both phases. The microfluidic device possessed a 55 mm contact length and a 38.5 µL internal volume. During counter‐current flow, we observed approximately 37 equilibrium stages (37 ± 13) based on a best‐fit of the solute fraction remaining in the aqueous phase using a Kremser Group Method analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Definition of a new (Doniach-Sunjic-Shirley) peak shape for fitting asymmetric signals applied to reduced graphene oxide/graphene oxide XPS spectra

The existence of asymmetry in X-ray photoelectron spectroscopy (XPS) photoemission lines is widely accepted, but line shapes designed to accommodate asymmetry are generally lacking in theoretical justification. Here in this work, we present a new line shape for describing asymmetry in XPS signals that is based on two facts. First, the most widely known line shape for fitting asymmetric XPS signals that has a theoretical basis, referred to as the Doniach-Sunjic (DS) line shape, suffers from a mathematical inconvenience, which is that for asymmetric shapes the area beneath the curve (above the x-axis) is infinite. Second, it is common practice in XPS to remove the inelastically scattered background response of a peak in question with the Shirley algorithm. The new line shape described herein attempts to retain the theoretical virtues of the DS line shape, while allowing the use of a Shirley background, with the consequence that the resulting line shape has a finite area. To illustrate the use of this Doniach-Sunjic-Shirley (DSS) line shape, a set of spectra obtained from varying amounts of graphene oxide (GO) and reduced GO on a patterned, heterogeneous surface are fit and discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Geometric control of magnetic domain morphology in electrodeposited Ni rich NiPt mesoscopic wires

In this paper, we study the electrodeposited Ni—Pt magnetic wires, exploring the mechanisms by which changes in geometry and composition influence the local magnetic structure. The samples were prepared by electrodeposition, their elemental composition was analyzed by energy dispersive X-ray spectroscopy, and phase analysis was carried out by an X-ray diffraction measurement. Magnetic force microscopy measurements, and magnetic force microscopy measurements in magnetic field were carried out to study the domain morphology of the prepared samples. Magnetization characteristics were measured via vibrating sample magnetometry mode of a superconducting quantum interference device. Here, the results were analyzed and compared with micromagnetic simulations. It is shown that a strong perpendicular magnetic anisotropy is responsible for the characteristic checkerboard-like surface magnetization patterns, which can be tuned by geometrical constriction and Ni content. Understanding these relationships provides insights into the design of magnetic materials with tailored properties for advanced applications, like magnetic sensors.

Binary alloy↗
DOE OSTI2022

Plankton energy flows using a global size-structured and trait-based model

Plankton community models are critical tools for understanding the processes that shape marine plankton communities, how plankton communities impact biogeochemical cycles, and the feedbacks between community structure and function. Here, using the flexible Marine Biogeochemistry Library (MARBL), we present the Size-based Plankton ECological TRAits (MARBL-SPECTRA) model, which is designed to represent a diverse plankton community while remaining computationally tractable. MARBL-SPECTRA is composed of nine phytoplankton and six zooplankton size classes represented using allometric scaling relationships for physiological traits and interactions within multiple functional types. MARBL-SPECTRA is embedded within the global ocean component of the Community Earth System Model (CESM) and simulates large-scale, emergent patterns in phytoplankton growth limitation, plankton phenology, plankton generation time, and trophic transfer efficiency. The model qualitatively reproduces observed global patterns of surface nutrients, chlorophyll biomass, net primary production, and the biogeographies of a range of plankton size classes. In addition, the model simulates how predator:prey dynamics and trophic efficiency vary across gradients in total ecosystem productivity. Shorter food chains that export proportionally more carbon from the surface to the ocean interior occur in productive, eutrophic regions, whereas in oligotrophic regions, the food chains are relatively long and export less organic matter from the surface. The union of functional type modeling with size-resolved, trait-based modeling approaches allows MARBL-SPECTRA to capture both large-scale elemental cycles and the structure of planktonic food webs affecting trophic transfer efficiency.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Contrasting effects of lake breeze and urbanization on heat stress in Chicago metropolitan area

This study used the latest Weather Research and Forecasting (WRF) model coupled with multi -layer urban canopy models to investigate contrasting effects from urbanization and lake breeze on summer heat stress over the Chicago metropolitan area (CMA). Comparisons between the model and in situ observations show that this coupled modeling system better captures urban locations' diurnal pattern of surface air temperature, skin temperature and relative humidity, with root mean square error reduced from 1.58 to 1.80 degrees C to 1.14-1.31 degrees C, 3.11-3.55 degrees C to 1.81-2.21 degrees C, and 10.73-11.35% to 7.84-8.60%, respectively, compared to WRF without coupling the urban canopy models. Two sensitivity experiments were conducted to isolate the influence of lake breeze and urbanization: one replaced the urban land use with cropland over the CMA, and the other filled all of Lake Michigan with cropland. Three different heat stress indices were computed to assess the uncertainties of heat stress response to changes in air temperature, relative humidity, and wind conditions. Results show that, when the lake has the largest cooling effect on air temperature, it also increases the relative humidity the most, and vice versa for urban warming and drying effects. Urbanization intensifies heat stress at night, and extends the heat caution period by up to 4 h over inland urban grids; the lake breeze relieves heat stress during afternoon (when the heat stress is the worst), and shortens the heat caution period by 1-3 h over inland urban grids and 3-4 h over coastal urban grids. In conclusion, the intensification of heat stress over the CMA due to urbanization is more than four times greater than the reduction from the lake breeze in the late afternoon and evening.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Intra-Annual and Interannual Dynamics of Evaporation Over Western Lake Erie

Evaporation (E) is a critical component of the water and energy budget in lake systems yet is challenging to quantify directly and continuously. We examined the magnitude and changes of E and its drivers over Lake Erie - the shallowest and most southern lake of the Laurentian Great Lakes. We deployed two eddy-covariance tower sites in the western Lake Erie Basin - one located nearshore (CB) and one offshore (LI) - from September 2011 through May 2016. Monthly E varied from 5 to 120 mm, with maximum E occurring in August–October. The annual E was 635 ± 42 (±SD) mm at CB and 604 ± 32 mm at LI. Mean winter (October–March) E was 189 ± 61 mm at CB and 178 ± 25 mm at LI, accounting for 29.8% and 29.4% of annual E. Mean daily E was 1.8 mm during the coldest month (January) and 7.4 mm in the warmest month (July). Monthly E exhibited a strong positive linear relationship to the product of wind speed and vapor pressure deficit. Pronounced seasonal patterns in surface energy fluxes were observed with a 2-month lag in E from R n , due to the lake's heat storage. This lag was shorter than reports regarding other Great Lakes. Difference in E between the offshore and nearshore sites reflected within-lake spatial heterogeneity, likely attributable to climatic and bathymetric differences between them. These findings suggest that predictive models need to consider lake-specific heat storage and spatial heterogeneity in order to accurately simulate lake E and its seasonal dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Detecting Climate Teleconnections With Granger Causality

Abstract Climate system teleconnections are crucial for improving climate predictability, but difficult to quantify. Standard approaches to identify teleconnections are often based on correlations between time series. Here we present a novel method leveraging Granger causality, which can infer/detect relationships between any two fields. We compare teleconnections identified by correlation and Granger causality at different timescales. We find that both Granger causality and correlation consistently recover known seasonal precipitation responses to the sea surface temperature pattern associated with the El Niño Southern Oscillation. Such findings are robust across multiple time resolutions. In addition, we identify candidates for unexplored teleconnection responses.

Silva, Filipi N.↗
DOE OSTI2022

Future Changes in Active and Inactive Atlantic Hurricane Seasons in the Energy Exascale Earth System Model

Abstract North Atlantic tropical cyclones (TCs) have considerable interannual variability, with La Niña and the positive phase of the Atlantic Meridional Mode (AMM) tending to drive active hurricane seasons, and El Niño and the negative AMM often driving inactive seasons. Here, we analyze how active and inactive Atlantic hurricane seasons may change in the future using the high resolution Energy Exascale Earth System Model (E3SM). We performed atmosphere‐only simulations forced by sea‐surface temperature patterns characteristic of La Niña and the positive AMM jointly, and El Niño and the negative AMM jointly, in historical and future climates. Projected Atlantic TCs become more frequent in the future by approximately 34% during El Niño and negative AMM and by 66% during La Niña and positive AMM, with a significant increase in the portion of intense TCs. Warmer SSTs increase TC potential intensity, with reduced wind shear and increased mid‐tropospheric humidity further supporting TC activity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Trajectory sampling and finite-size effects in first-principles stopping power calculations

Abstract Real-time time-dependent density functional theory (TDDFT) is presently the most accurate available method for computing electronic stopping powers from first principles. However, obtaining application-relevant results often involves either costly averages over multiple calculations or ad hoc selection of a representative ion trajectory. We consider a broadly applicable, quantitative metric for evaluating and optimizing trajectories in this context. This methodology enables rigorous analysis of the failure modes of various common trajectory choices in crystalline materials. Although randomly selecting trajectories is common practice in stopping power calculations in solids, we show that nearly 30% of random trajectories in an FCC aluminum crystal will not representatively sample the material over the time and length scales feasibly simulated with TDDFT, and unrepresentative choices incur errors of up to 60%. We also show that finite-size effects depend on ion trajectory via “ouroboros” effects beyond the prevailing plasmon-based interpretation, and we propose a cost-reducing scheme to obtain converged results even when expensive core-electron contributions preclude large supercells. This work helps to mitigate poorly controlled approximations in first-principles stopping power calculations, allowing 1–2 order of magnitude cost reductions for obtaining representatively averaged and converged results.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Characterization of spent nuclear fuel canister surface roughness using surface replicating molds

In this study we present a replication method to determine surface roughness and to identify surface features when a sample cannot be directly analyzed by conventional techniques. As a demonstration, this method was applied to an unused spent nuclear fuel dry storage canister to determine variation across different surface features. In this study, an initial material down-selection was performed to determine the best molding agent and determined that non-modified Polytek PlatSil23-75 provided the most accurate representation of the surface while providing good usability. Other materials that were considered include Polygel Brush-On 35 polyurethane rubber (with and without Pol-ease 2300 release agent), Polytek PlatSil73-25 silicone rubber (with and without PlatThix thickening agent and Pol-ease 2300 release agent), and Express STD vinylpolysiloxane impression putty. The ability of PlatSil73-25 to create an accurate surface replica was evaluated by creating surface molds of several locations on surface roughness standards representing ISO grade surfaces N 3 , N 5 , N 7 , and N 8 . Overall, the molds were able to accurately reproduce the expected roughness average (R a ) values, but systematically over-estimated the peak-valley maximum roughness (R z ) values. Using a 3D printed sample cell, several locations across the stainless steel spent nuclear fuel canister were sampled to determine the surface roughness. These measurements provided information regarding variability in normal surface roughness across the canister as well as a detailed evaluation on specific surface features (e.g., welds, grind marks, etc.). The results of these measurements can support development of dry storage canister ageing management programs, as surface roughness is an important factor for surface dust deposition and accumulation. This method can be applied more broadly to different surfaces beyond stainless steel to provide rapid, accurate surface replications for analytical evaluation by profilometry.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Steady global surface warming from 1973 to 2022 but increased warming rate after 1990

The change in global mean surface temperature is a crucial and broadly used indicator of the evolution of climate change. Any decadal scale changes in warming rate are however obfuscated by internal variability. Here we show that the surface temperature increase through the recent La Nina influenced years (2022) is consistent with the 50-year trend of 0.18 °C/decade. We use an Earth System Model based tool to filter out modulations to the warming rate by sea-surface temperature patterns and find consistent warming rates in four major global temperature data series. However, we also find clear indications, in all observational series, of a step-up in warming rate since around 1990. CMIP6 models generally do not capture this observed combination of long-term warming rate and recent increase.

58 GEOSCIENCES↗
DOE OSTI2020

Surface chemical trapping of optical cycling centers

Quantum information processors based on trapped atoms utilize laser-induced optical cycling transitions for state preparation and measurement. These transitions consist of an electronic excitation from the ground to an excited state and a decay back to the initial ground state, associated with a photon emission. While this technique has been used primarily with atoms, it has also recently been shown to work for some divalent metal hydroxides ( e.g. SrOH) and alkoxides ( e.g. SrOCH 3 ). Additionally, this extension to molecules is possible because these molecules feature nearly isolated, atomic-like ground and first-excited electronic states centered on the radical metal atom. We theoretically investigate the extension of this idea to a larger scale by growing the alkyl group, R, beyond the initial methyl group, CH 3 , while preserving the isolated and highly vertical character of the electronic excitation on the radical metal atom, M. Theory suggests that in the limit as the size of the ligand carbon chain increases, it can be considered a functionalized diamond (or cubic boron nitride) surface. Several requirements must be observed for the cycling centers to function when bound to the surface. First, the surface must have a significant band gap that fully encapsulates both the ground and excited states of the cycling center. Second, while the surface lattice imposes strict limits on the achievable spacing between the SrO– groups, at high coverage, SrO– centers can interact, and show geometric changes and/or electronic state mixing. We show that the coverage of the diamond surface with SrO– cycling centers needs to be significantly sub-monolayer for the functionality of the cycling center to be preserved. Having the lattice-imposed spatial control of SrO– placements will allow nanometer-scale proximity between qubits and will eliminate the need for atom traps for localized cycling emitters. Our results also imply that a functionalization could be done on a scanning microscope tip for local quantum sensing or on photonic structures for optically-mediated quantum information processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

GaSb-based heterostructure with buried vacuum pocket photonic crystal layer

The vacuum pocket retaining molecular beam epitaxial regrowth of the nano-patterned GaSb surface was demonstrated. The high contrast 2D photonic crystal layer was incorporated into the test 2 μm emitting laser heterostructure. The photonic dispersion determined from angle-resolved electroluminescence experiment showed four well-resolved bands corresponding to the model predictions for the square lattice. The single-mode lasing near 2 μm has been observed at the temperature corresponding to the alignment of the photonic crystal band-edge states and the quantum well gain peak. The reference devices without the photonic crystal layer emitted trivial spectra and did not lase at any temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Device-quality, reconfigurable metamaterials from shape-directed nanocrystal assembly

Significance Colloidal nanocrystals with defined sizes and shapes are ideal building blocks for nanofabrication. However, the ability to arbitrarily arrange them on surfaces with control over their orientation remains elusive. Here we report a shallow-template-assisted DNA-mediated assembly strategy to precisely arrange colloidal nanocrystals on surfaces, with single-particle control across submillimeter areas. In addition, the oligonucleotide bonds between the nanocrystals and substrate can be reversibly expanded and contracted enabling postsynthetic tunability of the assembled structures. Using this approach, we synthesized a nanocrystal-based, dynamically tunable metasurface (an anomalous reflector), thereby illustrating the potential for unique device construction via DNA programmable assembly.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Natural variability contributes to model–satellite differences in tropical tropospheric warming

Significance Climate models have, on average, simulated substantially more tropical tropospheric warming than satellite data, with few simulations matching observations. It has been suggested that this discrepancy arises because climate models are overly sensitive to greenhouse gas increases. Tropical tropospheric temperature trends from a large ensemble of simulations performed with a single climate model span a wide range that is solely due to natural climate variability. A subset of these simulations have warming rates in accord with satellite observations. Simulations with diminished tropical tropospheric warming due to climate variability exhibit characteristic patterns of surface warming that are similar to the observed record. Our results indicate that multidecadal variability can explain current model–observational differences in the rate of tropical tropospheric warming.

58 GEOSCIENCES↗
DOE OSTI2021

Direct Imaging of Resonant Phonon-Magnon Coupling

Detection of phonons is critical for research on the interconversion between resonantly coupled magnons and phonons. Here we report the direct visualization of the resonant coupling of magnons and phonons by microfocused Brillouin light scattering on the Ni/Li Nb O 3 hybrid heterostructure. The static patterns of surface acoustic wave phonons, originating from the interference between the incident wave ψ 0 (A 0 , k, φ 0 ) and reflected wave ψ 1 (A 1 , - k, φ 1 ), can be modulated by magnetic field due to the magnon-phonon coupling. By analyzing the information of phonons obtained from Brillouin spectroscopy, the properties of the magnon system (Ni film), e.g., ferromagnetic resonance field and resonance linewidth, can be determined. The results provide spatially resolved information about phonon manipulation and detection in a coupled magnon-phonon system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Forest Breeze–Cold Pool Interactions Drive Convective Organization over Heterogeneous Vegetation

Heterogeneous landscapes can influence the development of convection through the generation of thermally driven mesoscale circulations. To assess the impacts of these circulations and their interaction with sea breezes, we simulated convection in an idealized coastal environment using the Regional Atmospheric Modeling System (RAMS). We compared simulations with striped patterns of surface vegetation to those of uniform vegetation to identify the importance of vegetation heterogeneity in impacting convective development. Under dry soil conditions representative of those during the Tracking Aerosol Convection Interactions Experiment (TRACER) and Experiment of Sea Breeze Convection, Aerosols, Precipitation, and Environment (ESCAPE) campaigns in June 2022, we found that these vegetation-induced circulations, referred to in the literature as “forest breezes,” are more important than the sea breeze in determining the location of convection initiation. Convection and precipitation are also found to be favored over forests and suppressed over pasture and suburban landscapes as a result of greater surface sensible heat flux over the forest. Our findings also indicate that forest breezes are important for initiating convection along the boundaries of the forest, but that cold pools may play a key role in propagating the forest breezes toward the center of the forest stripe. In our simulations, the collisions of these breezes in the center of the forest stripe lead to uplift and strong convection there; however, a different width of the forest stripe would alter when the forest breezes collide or whether they collide at all. The presence of these cold pools may therefore impact the “ideal stripe width,” the width of each vegetation stripe which maximizes domain-wide precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Seasonally and Regionally Dependent Shifts of the Atmospheric Westerly Jets under Global Warming

A distinct feature of the atmospheric circulation response to increasing greenhouse gas forcing is the poleward shift of the zonal-mean westerly jet. The dynamical mechanisms of the zonal-mean poleward jet shift have been extensively studied in literature. At seasonal/regional scales, however, the westerly jets can shift equatorward, such as in the early-summer Asia–Pacific region, the late-winter America–Atlantic region, and the winter/spring east Pacific. These equatorward jet shifts imply climate impacts distinct from those of the poleward shifts, yet their causes are not well understood. In this work, based on a hierarchy of coupled, prescribed-SST, and aquaplanet simulations, we attribute the seasonal/regional equatorward jet shifts to the enhanced tropical upper-level warming (ETUW), which arises from both the tropical moist adiabat and the enhanced equatorial surface warming. By steepening the meridional temperature gradient in the subtropical upper-to-middle level and assisted by positive eddy feedback, the ETUW increases the zonal wind equatorward of the climatological jet. When the regional/seasonal meridional temperature gradients (or equivalently the westerly jets) are weak and peak close to the tropics, the ETUW effect overcomes the poleward jet-shift mechanisms and leads to the equatorward jet shifts. This climatological-state dependency is consistently seen in the decomposed jet responses to uniform warming and surface warming pattern, and further demonstrated through idealized aquaplanet experiments with designed climatological states. For uniform warming, the ETUW arising from moist adiabat makes the general poleward jet shifts insignificant in the aforementioned favorable regions/seasons. For warming pattern, the ETUW from enhanced equatorial warming drives substantial equatorward jet shifts in these favorable seasons/regions.

54 ENVIRONMENTAL SCIENCES↗