Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Analysis of selected specimens from the STS-46 Energetic Oxygen Interaction with Materials-3 experiment

The Energetic Oxygen Interaction with Materials 3 (EOIM-3) experiment was flown on the STS-46 mission, which was launched on 31 Jul. 1992 and returned 8 Aug. 1992. Boeing specimens were located on both the NASA Marshall Space Flight Center (MSFC) tray and the Ballistic Missile Defense Organization (BMDO) tray integrated by the Jet Propulsion Laboratory (JPL). The EOIM-3 pallet was mounted in the Space Shuttle payload bay near the aft bulkhead. During the mission, the atomic oxygen (AO) exposure levels of specimens in these passive sample trays was about 2.3 x 10(exp 20) atoms/sq cm. The specimens also received an estimated 22 equivalent sun hours of solar exposure. In addition, it appears that the EOIM-3 pallet was exposed to a silicone contamination source and many specimens had a thin layer of silicon based deposit on their surfaces after the flight. The specimens on the MSFC tray included seven solid film lubricants, a selection of butyl rubber (B612) and silicone (S383) o-rings, three indirect scatter surfaces, and Silver/Fluorinated Ethylene Propylene (Ag/FEP) and Chemglaze A276 specimens which had previously flown on trailing edge locations of the Long Duration Exposure Facility (LDEF). The specimens on the JPL tray included composites previously flown on LDEF and two indirect scattering surfaces.

Golden, Johnny L.↗
NASA NTRS1981

Effects of multiple scattering and surface albedo on the photochemistry of the troposphere

The effect of treatment of incoming solar radiation on the photochemistry of the troposphere is discussed. A one dimensional photochemical model of the troposphere containing the species of the nitrogen, oxygen, carbon, hydrogen, and sulfur families was developed. The vertical flux is simulated by use of the parameterized eddy diffusion coefficients. The photochemical model is coupled to a radiative transfer model that calculates the radiation field due to the incoming solar radiation which initiates much of the photochemistry of the troposphere. Vertical profiles of tropospheric species were compared with the Leighton approximation, radiative transfer, matrix inversion model. The radiative transfer code includes the effects of multiple scattering due to molecules and aerosols, pure absorption, and surface albedo on the transfer of incoming solar radiation. It is indicated that significant differences exist for several key photolysis frequencies and species number density profiles between the Leighton approximation and the profiles generated with, radiative transfer, matrix inversion technique. Most species show enhanced vertical profiles when the more realistic treatment of the incoming solar radiation field is included

Augustsson, T. R.↗
NASA NTRS1982

Fitting surfaces to scattered data

A variety of numerical methods for fitting a function to data given at a set of points scattered throughout a domain in the plane are surveyed. Four classes of methods are discussed: (1) global interpolation; (2) local interpolation; (3) global approximation; and (4) local approximation. Also, two-stage methods and contouring are discussed. The surfaces constructed include polynomials, spline functions, and rational functions, among others.

Schumaker, L. L.↗
NASA NTRS1982

The effects of isotropic multiple scattering and surface albedo on the photochemistry of the troposphere

The present study is believed to be the first investigation which combines a detailed tropospheric photochemical model with a radiative code that realistically considers the important physical processes in the cloudless troposphere which control the transfer of incoming solar radiation. It is found in most cases that the inclusion of the multiple scattering code significantly alters the photolytic reaction frequencies. This in turn alters the vertical distribution of some key tropospheric species. In the case of ozone a decrease was found, while O(1D) and OH showed increased concentrations. The increases are especially evident for the species which are highly dependent on photolysis processes that occur shortward of about 320 nm. The photolysis frequencies for ozone photolysis calculated with the Anderson-Meier model are in general in excellent agreement with recent measurements

Augustsson, T. R.↗
NASA NTRS1984

A comparison between active and passive sensing of soil moisture from vegetated terrains

A comparison between active and passive sensing of soil moisture over vegetated areas is studied via scattering models. In active sensing three contributing terms to radar backscattering can be identified: (1) the ground surface scatter term; (2) the volume scatter term representing scattering from the vegetation layer; and (3) the surface volume scatter term accounting for scattering from both surface and volume. In emission three sources of contribution can also be identified: (1) surface emission; (2) upward volume emission from the vegetation layer; and (3) downward volume emission scattered upward by the ground surface. As ground moisture increases, terms (1) and (3) increase due to increase in permittivity in the active case. However, in passive sensing, term (1) decreases but term (3) increases for the same reason. This self conpensating effect produces a loss in sensitivity to change in ground moisture. Furthermore, emission from vegetation may be larger than that from the ground. Hence, the presence of vegetation layer causes a much greater loss of sensitivity to passive than active sensing of soil moisture.

Fung, A. K.↗
NASA NTRS1985

A comparison between active and passive sensing of soil moisture from vegetated terrains

A comparison between active and passive sensing of soil moisture over vegetated areas is studied via scattering models. In active sensing three contributing terms to radar backscattering can be identified: (1) the ground surface scatter term; (2) the volume scatter term representing scattering from the vegetation layer; and (3) the surface volume scatter term accounting for scattering from both surface and volume. In emission three sources of contribution can also be identified: (1) surface emission; (2) upward volume emission from the vegetation layer; and (3) downward volume emission scattered upward by the ground surface. As ground moisture increases, terms (1) and (3) increase due to increase in permittivity in the active case. However, in passive sensing, term (1) decreases but term (3) increases for the same reason. This self compensating effect produces a loss in sensitivity to change in ground moisture. Furthermore, emission from vegetation may be larger than that from the ground. Hence, the presence of vegetation layer causes a much greater loss of sensitivity to passive than active sensing of soil moisture.

Fung, A. K.↗
DOE OSTI2024

Cosmic topology. Part IIa. Eigenmodes, correlation matrices, and detectability of orientable Euclidean manifolds

Abstract If the Universe has non-trivial spatial topology, observables depend on both the parameters of the spatial manifold and the position and orientation of the observer. In infinite Euclidean space, most cosmological observables arise from the amplitudes of Fourier modes of primordial scalar curvature perturbations. Topological boundary conditions replace the full set of Fourier modes with specific linear combinations of selected Fourier modes as the eigenmodes of the scalar Laplacian. We present formulas for eigenmodes in orientable Euclidean manifolds with the topologiesE 1 –E 6 ,E 11 ,E 12 ,E 16 , andE 18 that encompass the full range of manifold parameters and observer positions, generalizing previous treatments. Under the assumption that the amplitudes of primordial scalar curvature eigenmodes are independent random variables, for each topology we obtain the correlation matrices of Fourier-mode amplitudes (of scalar fields linearly related to the scalar curvature) and the correlation matrices of spherical-harmonic coefficients of such fields sampled on a sphere, such as the temperature of the cosmic microwave background (CMB). We evaluate the detectability of these correlations given the cosmic variance of the observed CMB sky. We find that topologies where the distance to our nearest clone is less than about 1.2 times the diameter of the last scattering surface of the CMB give a correlation signal that is larger than cosmic variance noise in the CMB. This implies that if cosmic topology is the explanation of large-angle anomalies in the CMB, then the distance to our nearest clone is not much larger than the diameter of the last scattering surface. We argue that the topological information is likely to be better preserved in three-dimensional data, such as will eventually be available from large-scale structure surveys.

Astronomy & Astrophysics↗
NASA NTRS1972

On the performance of infrared sensors in earth observations

The performance of infrared sensing systems is dependent upon the radiative properties of targets in addition to constraints imposed by system components. The unclassified state-of-the-art of infrared system performance figures is reviewed to indicate the relevance to system performance of target radiative properties. A theory of rough surface scattering is developed which allows the formulation of the reflective characteristics of extended targets. The thermal radiation emission from extended targets is formulated on the basis of internal radiation characteristics of natural materials and the transmissive scattering effects at the surface. Finally, the total radiative characteristics may be expressed as functions of material properties and incident and received directions, although the expressions are extremely complex functions and do not account for the effects of shadowing or multiple scattering. It is believed that the theory may be extended to include these effects and to incorporate the local radii of curvature of the surface.

Johnson, L. F.↗
NASA NTRS2005

A Polarimetric Scattering Model for the 2-Layer Problem

In this paper, polarimetric signatures from two layers are examined. In the two layer problem a low-loss dielectric layer sits on top of a shallow subsurface layer of scatterers. Volume scattering within the top surface layer is not considered. We show that for polarimetric backscatter data acquired from just one incidence angle, no parameter is proportional to the depth of the subsurface layer. We also show that separation of the two components and inversion of the polarimetric backscatter measurements is not possible, in the latter case due to the mismatch between the number of variables that determine the backscatter behavior, versus the degrees of freedom in the measured values. The interesting results obtained at a sand dune site in SW France courtesy of the group led by Dr. Phillippe Paillou are examined through the prism of this model. It is shown that the model agrees well with results obtained for a subsurface layer at 3 m depth, where the subsurface returns are significant, and that surface scattering alone can account for observations made over a subsurface layer at a depth of 5.8 m, provided the surface slope is adjusted by approx. 10 degrees. The implications for exploration of the near-surface of Mars, a significant proportion of which is obscured by a dust mantle, are discussed.

Freeman, A.↗
NASA NTRS1990

Comparison of measurements and theory for backscatter from bare and snow-covered saline ice

C-band radar backscatter measurements were made on artificially grown sea ice during the winters of 1987-1988 and 1988-1989. These measurements were made on smooth, rough, and snow-covered saline ice. The measured sigma-deg(theta) of smooth saline ice (rms height less than 0.05 cm) disagreed with small perturbation method (SPM) surface scattering predictions. Using physical parameters of the ice in a simple layer model, it us shown that this discrepancy can be explained by scattering from beneath the surface. A thin (7-cm) dry snow cover had a significant influence on backscatter from the smooth ice sheet. This influence was due to scattering from particles within the snow, and can be predicted by a commonly used empirical layer model for snow. The results of backscatter measurements of a moderately rough saline ice sheet were found to agree with SPM predictions.

Bredow, Jonathan W.↗
NASA NTRS1973

Numerical comparisons of a modified Rayleigh approach with other rough surface EM scattering solutions.

A modification of the classical Rayleigh technique utilizing the fast Fourier transform, developed into the so-called Rayleigh-FFT method for electromagnetic scattering, is shown to obtain valid scattering results from arbitrary irregular periodic structures composed of a rough layer over a rough half-space. The considerable usefulness of the Rayleigh approach is thus established, and Beckmann's (1968) contention (that the convergence of the method is reasonably rapid only if the roughness is very slight) is refuted.

Jiracek, G. R.↗
NASA NTRS1974

A new approach to mass spectrometer measurements of thermospheric density

The gas sampling problem in satellite and high velocity probes was investigated by applying the theory of a drifting Maxwellian gas. A lens system using a free stream ion source was developed and experimentally evaluated over the pressure range of 0.00001 to 0.01 N/m sq (approx. 10 to the minus 7th power to 0.0001 torr). The source has high beam transparency, which minimizes gas-surface collisions within, or near, the ionization volume. It is shown that for high ion energy (60 eV), the extracted ion beam has an on-axis energy spread of less than 4 eV, and that 90 percent of the ions are within 2.5 deg of the beam axis. It is concluded that the molecular beam mass spectrometer concept, developed for gas density measurements in the upper atmosphere, substantially reduces gas-surface scattering and gas-surface reactions in the sample, and preserves the integrity of the gas sample during the analysis process. Studies show that both the Scout and Delta launch vehicles have adequate volume, control, velocity, and data acquisition capability necessary to obtain thermospheric number density in real time.

Melfi, L. T., Jr.↗
NASA NTRS1981

Effect of atmospheric scattering and surface reflection on upwelling solar radiation

A study is presented of the solar radiation transfer in the complete earth-atmosphere system, and numerical results are compared with satellite data obtained during the Earth Radiation Budget Experiment on Nimbus 6, in August, 1975. Emphasis is placed on the upwelling radiance distribution at the top of the atmosphere, assumed to be at 50 km. The numerical technique is based on the finite difference method, which includes azimuth and spectral variations for the entire solar wavelength range. Detailed solar properties, atmospheric physical properties, and optical properties are used. However, since the property descriptions are based on a trade-off between accuracy and computational realities, aerosol and cloud optical properties are treated with simple approximations. The radiative transfer model is in good agreement with the satellite radiance observations. The method provides a valuable tool in analyzing satellite- and ground-based radiation budget measurements and in designing instrumentation.

Suttles, J. T.↗
NASA NTRS1994

(abstract) Optical Scattering and Surface Microroughness of Ion Beam Deposited Au and Pt Thin Films

Thin films of gold and platinum have been deposited onto superpolished fused silica substrates using thermal evaporation, ion assisted deposition (IAD), and ion assisted sputtering. The influence of ion beam flux, thin film material, and deposition rate on the films microroughness have been investigated. Short range surface microroughness of the films has been examined using scanning tunneling microscopy (STM) and atomic force microscopy (AFM). Long range surface microroughness has been characterized using an angle resolved optical scatterometer. Results indicate that ion beam deposited coatings have improved microstructure over thermally evaporated films.

assisted sputtering fused silica ion beam microrou↗
NASA NTRS1993

Symmetry in polarimetric remote sensing

Relationships among polarimetric backscattering coefficients are derived from the viewpoint of symmetry groups. For both reciprocal and non-reciprocal media, symmetry encountered in remote sensing due to reflection, rotation, azimuthal, and centrical symmetry groups is considered. The derived properties are general and valid to all scattering mechanisms, including volume and surface scatterings and their interactions, in a given symmetrical configuration. The scattering coefficients calculated from theoretical models for layer random media and rough surfaces are shown to obey the symmetry relations. Use of symmetry properties in remote sensing of structural and environmental responses of scattering media is also discussed. Orientations of spheroidal scatterers described by spherical, uniform, planophile, plagiothile, erectophile, and extremophile distributions are considered to derive their polarimetric backscattering characteristics. These distributions can be identified from the observed scattering coefficients by comparison with theoretical symmetry calculations. A new parameter is then defined to study scattering structures in geophysical media. Observations from polarimetric data acquired by the Jet Propulsion Laboratory airborne synthetic aperture radar over forests, sea ice, and sea surface are presented. Experimental evidences of the symmetry relationships are shown and their use in polarimetric remote sensing is illustrated. For forests, the coniferous forest in Mt. Shasta area (California) and mixed forest near Presque Isle (Maine) exhibit characteristics of the centrical symmetry at C-band. For sea ice in the Beaufort Sea, multi-year sea ice has a cross-polarized ratio e close to e(sub 0), calculated from symmetry, due to the randomness in the scattering structure. First-year sea ice has e much smaller than e(sub 0) due to the preferential alignment of the columnar structure of the ice. From polarimetric data of a sea surface in the Bering Sea, it is observed that e and e(sub 0) are increasing with incident angle and e is greater than e(sub 0) at L-band because of the directional feature of sea surface waves. Symmetry properties of geophysical media can also be used to calibrate polarimetric radars.

Nghiem, S. V.↗
NASA NTRS1986

Simultaneous ocean cross section and rainfall measurements from space with a nadir-looking radar

In the case of a nadir-looking spaceborne or aircraft radar in the presence of rain, the return power corresponding to secondary surface scattering may provide information on the properties of the surface and the precipitation. The object of the study is to evaluate a method for determining simultaneously the rainfall rate and the backscattering coefficient of the surface. The method is based upon the mirror-reflected power, which corresponds to the portion of the incident power scattered from the surface to the precipitation, intercepted by the precipitation, and again returned to the surface where it is scattered a final time back to the antenna.

Meneghini, Robert↗
DOE OSTI2021

Interfacial X-Ray Scattering from Small Surfaces: Adapting Mineral-Fluid Structure Methods for Microcrystalline Materials

Crystal truncation rod (CTR) X-ray diffraction is an invaluable tool for measuring mineral surface and adsorbate structures, and has been applied to several environmentally and geochemically important systems. Traditionally, the method has been restricted to single crystals with lateral dimensions >3 mm. Minerals that meet this size criterion represent a minute fraction of those that are relevant to interfacial geochemistry questions, however. Crystal screening, data collection, and CTR measurement methods have been developed for crystals of <0.3 mm in lateral size using the manganese oxide mineral chalcophanite (ZnMn 3 O 7 •3H 2 O) as a case study. Furthermore, this work demonstrates the feasibility of applying the CTR technique to previously inaccessible surfaces, opening up a large suite of candidate substrates for future study.

58 GEOSCIENCES↗
DOE OSTI2025

Evaporation of a Reactive Nanofluid Sessile Drop: Capturing Rapid Emergence of Surface Crystals with In Situ Synchrotron X-ray Diffraction

Mechanisms for surface pattern formation from evaporation of a reactive nanofluid sessile drop are not well understood. In contrast to the coffee-ring effect from inert particles, rapid chemical and morphological transformation of reactive nanoparticles upon rapid evaporative drying are challenging to probe experimentally. Here, using grazing-incidence X-ray surface scattering, the nanostructure of nascent surface patterns has been probed as a ZnO nanofluid sessile drop rapidly dries. The high temporal resolution enabled by the high flux of synchrotron X-rays allows the observation of the emergence of Zn(OH) 2 surface crystals from the onset of evaporation and their rapid evolution into the final residual surface pattern, via transient layered complexes evident from the temporary appearance of X-ray diffraction peaks preceding Zn(OH) 2 formation. The results offer mechanistic insights of morphogenesis of surface patterns from evaporation-induced self-assembly and self-organization of reactive nanofluids, previously untenable using other experimental methods.

36 MATERIALS SCIENCE↗