Search NASA⌕ Search

SEARCH · Search NASA

Results for “temperature programmed desorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Insights into acetone photochemistry on rutile TiO₂(110). 2. new photodesorption channel with CH₃ ejection along the surface normal

Angle-resolved photon stimulated desorption (PSD) combined with infrared reflection-adsorption spectroscopy and temperature programmed desorption reveal two distinct channels in the photochemistry of acetone on rutile TiO₂(110) surface. During UV irradiation of co-adsorbed oxygen and acetone molecules, methyl radicals (CH₃) are ejected in two different directions: i) normal to the surface and ii) off-normal at ~±66° to the surface normal in the azimuth (i.e. perpendicular to the rows of bridging oxygen and Ti atoms). Both components are relatively narrow and non-cosine, indicating non-thermal evolution of CH₃ radicals. The direction of the “off-normal” PSD component is consistent with orientation of the C–CH₃ bonds in the n²-acetone diolate—a photoactive form of acetone chemisorption on the oxidized TiO₂(110) surface proposed earlier from experimental and theoretical studies. The direction of the “normal” PSD component requires an orientation of a C–CH₃ bond which is not consistent with the n²-acetone diolate structure. The angular distribution of the CH₃ PSD depends on the acetone coverage. The “off-normal” PSD component dominates at lower acetone coverage (< 0.2 ML), but does not increase at higher coverages in accord with the acetone diolate peak intensity in the infrared reflection-absorption spectra. The “normal” PSD component grows with the acetone coverage up to 0.6 ML. The newly discovered “normal” PSD channel is tentatively assigned to a photo-produced n²- acetone enolate as a potential precursor based on the H/D exchange experiments

Environmental Molecular Sciences Laboratory↗

Fabrication of Large-Area Metal-on-Carbon Catalytic Condensers for Programmable Catalysis

Catalytic condensers stabilize charge on either side of a high-k dielectric film to modulate the electronic states of a catalytic layer for the electronic control of surface reactions. Here, carbon sputtering provided for fast, large-scale fabrication of metal–carbon catalytic condensers required for industrial application. Carbon films were sputtered on HfO 2 dielectric/p-type Si with different thicknesses (1, 3, 6, and 10 nm), and the enhancement of conductance and capacitance of carbon films was observed upon increasing the carbon thickness following thermal treatment at 400 °C. After Pt deposition on the carbon films, the Pt catalytic condenser exhibited a high capacitance of ∼210 nF/cm 2 that was maintained at a frequency ∼1000 Hz, satisfying the requirement for a dynamic catalyst to implement catalytic resonance. Temperature-programmed desorption of carbon monoxide yielded CO desorption peaks that shifted in temperature with the varying potential applied to the condenser (−6 or +6 V), indicating a shift in the binding energy of carbon monoxide on the Pt condenser surface. A substantial increase in capacitance (∼2000 nF/cm 2 ) of the Pt-on-carbon devices was observed at elevated temperatures of 400 °C that can modulate ∼10% of charge per metal atom when 10 V potential was applied. A large catalytic condenser of 42 cm 2 area Pt/C/HfO 2 /Si exhibited a high capacitance of 9393 nF with a low leakage current/capacitive current ratio (<0.1), demonstrating the practicality and versatility of the facile, large-scale fabrication method for metal–carbon catalytic condensers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption, Desorption, and Displacement Kinetics of H2O and CO2 on TiO2(110)

The adsorption, desorption, and displacement kinetics of H2O and CO2 on TiO2(110) are investigated using temperature programmed desorption (TPD) and molecular beam techniques. The TPD spectra for both H2O and CO2 have well-resolved peaks corresponding to desorption from bridge-bonded oxygen (BBO), Ti, and oxygen vacancies (VO) sites in order of increasing peak temperature. Analysis of the saturated monolayer peak for both species reveals that the corresponding adsorption energies on all sites are greater for H2O and for CO2. Sequential dosing of H2O and CO2 reveals that, independent of the dose order, H2O molecules will displace CO2 in order to occupy the highest energy binding sites available. Isothermal experiments show that the displacement of CO2 by H2O occurs between 75 and 80 K. Further analysis shows that a ratio of 4 H2O to 3 CO2 molecules is needed to displace CO2 from the TiO2(110) surface.

Environmental Molecular Sciences Laboratory↗

Hydrogen retention in lithium and lithium oxide films

Pure lithium (Li) surfaces are difficult to maintain in fusion devices due to rapid oxide formation, therefore, parameterizing and understanding the mechanisms of hydrogen (H, D) retention in lithium oxide (Li 2 O) in addition to pure Li is crucial for Li plasma-facing material applications. To compare H retention in Li and Li 2 O films, measurements were made as a function of surface temperature (90–520 K) under ultrahigh vacuum (UHV) conditions using temperature programmed desorption (TPD). In both cases, the total retention dropped with surface temperature, from 95% at 90 K to 35% at 520 K Li 2 O films retained H in similar amounts as pure Li. Finally, Molecular Dynamics (MD) modeling was used to elucidate the mechanisms of H retention, and results were consistent with experiments in terms of both retention fraction and the drop of retention with temperature.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Temperature Pretreatment Effect on Co/SiO 2 Active Sites and Ethane Dehydrogenation

Here, we report the synthesis, optimization, and characterization of Co/SiO 2 for ethane nonoxidative dehydrogenation. Co/SiO 2 is synthesized via strong electrostatic adsorption using the widely available Co(NO 3 ) 2 as the precursor. We demonstrate that high-temperature pretreatment (900 °C) in an inert atmosphere can significantly enhance the initial activity of the Co/SiO 2 catalyst. X-ray absorption near-edge spectroscopy (XANES), temperature-programmed reduction (TPR), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) suggest that highly dispersed Co(II) clusters are more active than Co 0 or CoO x nanoparticles. Fourier transform infrared (FTIR) and isopropanol (IPA) temperature-programmed desorption and density functional theory (DFT) calculations suggest that high-temperature treatment significantly increases the density of active Lewis acid sites, possibly via surface dehydroxylation of the catalyst.

36 MATERIALS SCIENCE↗

Thermal chemistry of the Cu-KI5 atomic layer deposition precursor on a copper surface

The thermal chemistry of a Cu(I) ketoiminate complex, Cu-KI5, resulting from the modification of the known Air Products CupraSelect{sup ®} copper CVD precursor Cu(hfac)(tmvs) designed to tether the two ligands via an isopropoxide linker, was studied under ultrahigh vacuum on a Cu(110) single-crystal surface by using a combination of temperature programmed desorption (TPD) and x-ray photoelectron spectroscopy. Adsorption at low temperatures was determined to take place via the displacement of the vinyl ligand by the surface. Molecular desorption was seen at 210 K, and the evolution of Cu(II)-KI5{sub 2} was established to take place at 280 K, presumably from a disproportionation reaction that also leads to the deposition of Cu(0). Other sets of desorption products were seen at 150, 250, and 430 K, all containing copper atoms and small organic moieties with molecular masses below 100 amu. The latter TPD peak in particular indicates significant fragmentation of the ligands, likely at the C–N bond that holds the vinylsilane-isopropoxide moiety tethered to the ketoimine fragment, and possibly also at the union between the vinylsilane and the alkoxide linker. The 430 K temperature measured for this chemistry may set an upper limit for clean Cu film deposition, but since reactivity on the surface was also found to be inhibited at higher surface coverages, it may be delayed to higher temperatures under atomic layer deposition conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measuring Diffusivity in Supercooled Liquid Nanoscale Films using Inert Gas Permeation: I. Kinetic Model and Scaling Methods

We describe in detail a diffusion model used to simulate inert gas transport through supercooled liquid overlayers. In recent work, the transport of the inert gas has been shown to be an effective probe of the diffusivity of supercooled liquid methanol in the experimentally challenging regime near the glass transition temperature. The model simulations accurately and quantitatively describe the inert gas permeation desorption spectra. The simulation results are used to validate universal scaling relationships between the diffusivity, overlayer thickness, and the temperature ramp rate for isothermal and temperature programmed desorption. From these scaling relationships we derive simple equations from which the diffusivity can be obtained using the peak desorption time or temperature for an isothermal or set of TPD experiments respectively without numerical simulation. The results presented here demonstrate that the permeation of gases through amorphous overlayers has the potential to be a powerful technique to obtain diffusivity data in deeply supercooled liquids.

10 SYNTHETIC FUELS↗

Preparation and Characterization of Model Homotopic Catalysts: Rh Adatoms, Nanoparticles, and Mixed Oxide Surfaces on Fe 3 O 4 (001)

The atomic-level characterization of active sites is essential to understanding the mechanisms behind catalytic reactions. In this study, using scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS), we follow the morphological changes of a model Rh catalysts supported on Fe 3 O 4 (001) as a function of temperature and Rh coverage. Here, we identify the preparation conditions leading to model catalysts containing homotopic or nearly homotopic Rh species bound as adatoms, small clusters, substitutional within the Fe 3 O 4 (001), and nanoparticles. Adsorbates such as CO and CO 2 are further subsequently used to characterize the properties of different Rh sites. Using temperature programmed desorption (TPD), we demonstrate that adatoms, clusters, and nanoparticles exhibit high-temperature CO desorption (250-600 K). Strong binding on such sites further allows for CO oxidation to CO 2 via the Mars-van-Krevelen mechanism. In contrast, CO 2 was found to interact weakly with all Rh sites. Differences in desorption temperature enable the use of CO and CO 2 as titration methods for nanoparticles and Fe 3 O 4 (001), respectively. A small quantity of CO 2 was found to be reduced to CO on Rh adatoms and clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption and Photodesorption of CO from Charged Point Defects on TiO 2 (110)

Adsorption and photodesorption of weakly-bound carbon monoxide, CO, from reduced and hydroxylated rutile TiO2(110) (r- and h- TiO2(110)) at sub-monolayer coverages is studied with atomically-resolved scanning tunneling microscopy (STM) along with ensemble-averaged temperature-programmed desorption (TPD) and angle-resolved photon-stimulated desorption (PSD) at low temperatures ( 50 K). STM data weighted by the concentration of each kind of adsorption sites on r-TiO2(110) give an adsorption probability which is the highest for the bridging oxygen vacancies (VO) and very low for the Ti5c sites closest to VO. Occupancy of the remaining Ti5c sites with CO is significant, but smaller than for VO. The probability distribution for the different adsorption sites corresponds to a very small difference in CO adsorption energies: < 0.02 eV. We also find that UV irradiation stimulates both diffusion and desorption of CO at low temperature. CO photodesorbs primarily from the vacancies with a bi-modal angular distribution. In addition to a major, normal to the surface component, there is a broader cosine component indicating scattering from the surface which likely also leads to photo-stimulated diffusion. Hydroxylation of VO’s does not significantly change the CO PSD yield and angular distribution, indicating that not atomic but rather electronic surface defects are involved in the site-specific PSD process. We suggest that photodesorption can be initiated by recombination of photo-generated holes with excess unpaired electrons localized near the surface point-defect (either VO or bridging hydroxyl), leading to the surface atoms rearrangement and ejection of the weakly-bound CO molecules.

Environmental Molecular Sciences Laboratory↗

Deuterium desorption from tungsten using laser heating

Retention and desorption of hydrogenic species need to be accurately modeled to predict the tritium inventory of next generation fusion devices, which is needed both for tritium fuel recovery and for tritium safety concerns. In this paper, experiments on thermal desorption of deuterium from intrinsic polycrystalline tungsten defects using laser heating are compared to TMAP-7 modeling. The samples during deuterium plasma exposure were at a temperature of 373 K for this benchmark study with ion fluence of 0.7–1.0 × 10 24 Dm -2 . Following plasma exposure, a fiber laser (λ = 1100 nm) heated the samples to peak surface temperatures ranging from ~500 to 1400 K with pulse widths from 10 ms to 1 s, and 1 to 10 pulses applied to each sample. The remaining deuterium retention was measured using temperature programmed desorption (TPD). Results show that > 95% of deuterium is desorbed when the peak surface temperature reached ~950 K for > 1 s. TMAP-7 is used to predict deuterium desorption from tungsten for a range of surface temperatures and heating durations, and is compared to previous work on desorption from beryllium codeposits.

36 MATERIALS SCIENCE↗

Desorption Kinetics of Methanol, Ethanol, and Water from Graphene

The desorption kinetics of methanol, ethanol, and water from graphene covered Pt(111) are investigated. The temperature programmed desorption (TPD) spectra for both methanol and ethanol have well-resolved first, second, third, and multilayer layer desorption peaks. The alignment of the leading edges is consistent with zero-order desorption kinetics from all layers. In contrast, for water the first and second layers are not resolved. At low water coverages (< 1 ML) the initial desorption leading edges are aligned but then fall out of alignment at higher temperatures. For thicker water layers (10 to 100 ML), the desorption leading edges are in alignment throughout the desorption of the film. The coverage dependence of the desorption behavoir suggests that at low water coverages the non-alignment of the desorption leading edges is due to water dewetting from the graphene substrate. Kinetic simulations reveal that the experimental results are consistent with zero-order desorption. The simulations also show that fractional order desorption kinetics would be readily apparent in the experimental TPD spectra.

Environmental Molecular Sciences Laboratory↗

Adsorption of ethane, ethene, and ethyne on reconstructed Fe 3 O 4 (001)

The adsorption of the C2 hydrocarbons including ethane, ethene, and ethyne are studied on magnetite Fe 3 O 4 (001) by a combination of molecular beam dosing, temperature programmed desorption, and X-ray photoelectron spectroscopy. The ethane desorption profile has a single temperature invariant peak at 100 K while ethene and ethyne exhibit additional peaks at ~120 K and ~135 K. An inversion analysis is used to extract coverage dependent desorption energies as well as coverage-averaged prefactors for each molecule. Ethene and ethyne exhibit moderate coverage dependent desorption energies decreasing from ~80 to ~30 kJ/mol at saturation while ethane shows a relatively coverage invariant desorption energy ~28 kJ/mol. The desorption energies of the C2 hydrocarbons increase in order of increasing bond order. This is likely due to the enhanced interaction of the ethene and ethyne p system to the coordinatively unsaturated octahedral Fe sites (Fe oct ) on the ¬oxide surface. The saturation coverages of each C2 hydrocarbon at 82 K were also determined. Furthermore, these match well with the 2-dimensional spacing determined from their liquid densities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Irreversible oxygen poisoning: Modeling the initial water dissociation kinetics on δ-Pu(111) and δ-Pu(100) through density functional theory

In this work, the initial kinetics of water dissociation on two facets of δ-plutonium, δ-Pu(111) and δ-Pu(100), are explored through density functional theory in order to understand how water dissociation occurs on these facets. We explored the dissociation of water via the formation of hydroxyls, atomic hydrogen, and atomic oxygen species on each facet. We calculate low energetic barriers for water to split to adsorbed hydrogen and hydroxyl species at 0.19 eV for δ-Pu(111) and 0.07 eV for δ-Pu(100). The hydroxyl has a barrier of 0.64 and 0.37 eV to cleave the hydrogen–oxygen bond on δ-Pu(111) and δ-Pu(100), respectively. Due to the highly exergonic adsorption free energy of atomic oxygen of −2.10 eV, the metallic surfaces are found to be fully covered in oxygen, even with the inclusion of oxygen lateral interactions. When combined with the reaction thermodynamics, this free energy of adsorption forms a molecular oxygen desorption barrier greater than 9.51 eV (918 kJ/mol). These results, combined with simulated temperature programed desorption spectra, indicate that oxygen formed via water dissociation on δ-Pu (111) and (100) facets induces an irreversible poison that prevents further reaction of water directly on metallic plutonium surfaces, most likely due to the strong hybridization of the Pu and O valence states. Therefore, these results imply that another mechanism is responsible for the continuously experimentally measured water dissociation, which is most likely due to the Pu oxide.

36 MATERIALS SCIENCE↗

Carbon Monoxide Mediated Hydrogen Release from PtCu Single-Atom Alloys: The Punctured Molecular Cork Effect

Pt-based materials are used extensively in heterogeneous catalytic processes, yet they are notoriously susceptible to poisoning by CO. In contrast, highly dilute binary alloys formed of isolated Pt atoms in a Cu metal host, known as PtCu single-atom alloys (SAAs), are more resilient to CO poisoning during catalytic hydrogenation reactions. In this article, we describe how CO affects the adsorption and desorption of H 2 from a model PtCu(111) SAA surface and gain a microscopic understanding of these species’ interaction at the Pt atom active sites. By combining temperature-programmed desorption and scanning tunneling microscopy with first-principles kinetic Monte Carlo, we identify CO as a Pt site blocker that prevents the low temperature adsorption and desorption of H 2 , the so-called molecular cork effect , first realized when examining PdCu SAAs. Intriguingly, for the case of PtCu, H 2 desorption occurs before CO release is detected. Additionally, desorption experiments show a nonlinear relationship between CO coverage of the Pt sites and H 2 desorption peak temperature. When all the Pt atoms are saturated by CO, a very sharp H 2 desorption feature is observed 55 K above the regular desorption temperature of H 2 . Our simulations reveal that the origin of these effects is the fact that desorption of just one CO molecule from a Pt site facilitates the fast release of many molecules of H 2 . In fact, just 0.7% of the CO adsorbed at Pt sites has desorbed when the H 2 desorption peak maximum is reached. The release of H 2 from CO-corked PtCu SAA surfaces is analogous to the escape of gas from a pressurized container with a small puncture. Given that small changes in CO surface coverage lead to large changes in H 2 evolution energetics, the punctured molecular cork effect must be considered when modeling reaction mechanisms on similar alloy systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO oxidation on nanoporous gold: A combined TPD and XPS study of active catalysts

Disks of nanoporous gold (np-Au), produced by leaching of silver from AgAu alloy and prepared as active catalysts for CO oxidation in a continuous-flow reactor, were investigated in detail by x-ray photoelectron spectroscopy and temperature-programmed desorption spectroscopy in ultra-high vacuum. Np-Au exhibits several oxygen species on and in the surface: Chemisorbed oxygen (O act ), probably generated at residual silver sites at the surface, is readily available after np-Au preparation and consumed by CO oxidation. It can be replenished on activated np-Au by exposure to O 2 . In addition, strongly bound oxygen, probably at subsurface sites, is present as a major species and not consumed by CO oxidation. Pronounced CO desorption at temperatures above 200 K observed after exposing np-Au to CO at 105 K indicates an additional, more stable type of CO binding sites on np-Au as compared to pure gold. Only CO at these binding sites is consumed by oxidation reaction with O act . In conclusion, we propose that the presence of strongly bound subsurface oxygen stabilizes CO adsorption on np-Au, thereby being as crucial for the observed catalytic activity of np-Au as residual silver.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Interaction of Amorphous Solid Water on a Hydrophobic Surface: Dewetting and Crystallization Kinetics of ASW on Carbon Tetrachloride

Desorption of carbon tetrachloride from beneath an amorphous solid water (ASW) overlayer is explored utilizing a combination of temperature programmed desorption and infrared spectroscopy. Otherwise inaccessible information about the dewetting and crystallization of ASW is revealed by monitoring desorption of the CCl4 underlayer. The desorption maximum of CCl4 on graphene occurs at ~140 K. When ASW wets the CCl4 no desorption below 140 K is observed. However, the mobility of the water molecules increases with ASW deposition temperature, leading to a thermodynamically driven dewetting of water from the hydrophobic CCl4 surface. This dewetting exposes some CCl4 to the ambient environment, allowing unhindered desorption of CCl4 below 140 K. When ASW completely covers the underlayer, desorption of CCl4 is delayed until crystallization induced cracking of the ASW overlayer opens an escape path to the surface. The subsequent rapid episodic release of CCl4 is termed a “molecular volcano”. Reflection adsorption infrared spectroscopy (RAIRS) measurements indicate that the onset and duration of the molecular volcano is directly controlled by the ASW crystallization kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗