SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Earth and atmosphere thermal emission spectra via Nimbus 4 Michelson interferometer, obtaining atmospheric temperature, humidity and ozone profiles
Observations of thermal emission from Io in the near infrared made during an eclipse were combined with unpublished 8- to 13-micron intermediate band photometry and a 16- to 22-micron spectrum to specify Io's emission spectrum from 2.2 to 22 microns. Models were calculated having 'hot spots' at several different temperatures superposed on a surface, the major part of which is assumed to be at the solar equilibrium temperature. It was possible to fit the entire composite spectrum with this model. It is argued that the total emission from the hot spots can be equated to the nonsolar energy input into Io. The disk-averaged heat radiated by the hot spots is found to be 180 + or 60 microwatts/sq cm = 43 + or - 14 microcalories/sq cm-sec. A possible bimodal temperature distribution of the hot spots is discussed.
Spectra of the Martian thermal emission in the 5.4-10.5 micron region are reported. Emission features at 7.8 and 9.7 microns are attributed to surface silicates, and an emission feature at 6.1 micron is attributed to a molecular water component of the surface material. An absorption band at 8.7 micron and a possible one at 9.8 microns is attributed to sulfate or bisulfate anions probably located at a distorted crystalline site, and an absorption band at 6.7 microns is attributed to carbonate or bicarbonate anions located in a distorted crystalline site. Spectral simulations indicate that the sulfate- and carbonate-bearing minerals are contained in the same particles of airborne dust as the dominant silicate minerals, that the dust optical depth is about 0.6 at a reference wavelength of 0.3 micron over the area of the observed spots, and that sulfates and carbonates constitute 10-15 percent and 1-3 percent by volume of the airborne dust, respectively.
One of the key limitations affecting ability to achieve the efficiency and cost saving advantages of a supercritical CO 2 (scCO 2 ) power cycle resides with the primary heat exchanger where costs can exceed 50% of the plant capital budget depending on design. This project established the foundational groundwork for a new type of heat exchanger optimized to take advantage of radiative heat transfer to scCO 2 . Selective thermal emission coatings were designed and tested that radiated more light tuned to the 4.2 µm infrared absorption band of CO 2 . Coating design utilized principles of nanophotonic bandgap theory to design a selective emitter that has: 1) low emissivity in the visible band, 2) near 100% effective emissivity in the mid-IR wavelength between 4 and 4.5 µm wavelength, and 3) strong suppression of far-IR light emission that will maximize radiative heat transfer efficiency to scCO 2 . Computational fluid dynamics simulations show that an advanced heat exchanger implementing this selective thermal emitter coating is 25 to as much as 40% smaller than conventional heat exchanger designs.
We present a hard X-ray Nuclear Spectroscopic Telescope Array (NuSTAR) observation of PSR J0437-4715, the nearest millisecond pulsar. The known pulsations at the apparent pulse period approximately 5.76 ms are observed with a significance of 3.7sigma, at energies up to 20 keV above which the NuSTAR background dominates. We measure a photon index gamma = 1.50 +/- 0.25(90 per cent confidence) for the power-law fit to the non-thermal emission. It had been shown that spectral models with two or three thermal components fit the XMM-Newton spectrum of PSR J0437-4715, depending on the slope of the power-law component, and the amount of absorption of soft X-rays. The new constraint on the high-energy emission provided by NuSTAR removes ambiguities regarding the thermal components of the emission below 3 keV. We performed a simultaneous spectral analysis of the XMM-Newton and NuSTAR data to confirm that three thermal components and a power law are required to fit the 0.3-20 keV emission of PSR J0437-4715. Adding a ROSAT-PSPC spectrum further confirmed this result and allowed us to better constrain the temperatures of the three thermal components. A phase resolved analysis of the NuSTAR data revealed no significant change in the photon index of the high-energy emission. This NuSTAR observation provides further impetus for future observations with the NICER mission (Neutron Star Interior Composition Explorer) whose sensitivity will provide much stricter constraints on the equation of state of nuclear matter by combining model fits to the pulsars phase-folded light curve with the pulsars well-defined mass and distance from radio timing observations.
A radiative transfer method for treating nongray gaseous absorption and thermal emission in vertically inhomogeneous multiple scattering atmospheres is described. Probability density distributions of absorption coefficient strength are derived from line-by-line calculations to construct line-by-line and band model based k distributions. The monotonic ordering of absorption coefficient strengths in these k distributions implicitly preserves the monochromatic structure of the atmosphere at different pressure levels, thus simulating monochromatic spectral integration at a fraction of the line-by-line computing cost. The k distribution approach also permits accurate modeling of overlapping absorption by different atmospheric gases and accurate treatment of nongray absorption in multiple scattering media. It is shown that the correlated k distribution method is capable of achieving numerical accuracy to within 1 percent of cooling rates obtained with line-by-line calculations throughout the troposphere and most of the stratosphere.
Thermal emission measurements on dust-coated rocks and minerals show that a 300 5m thick layer is required to mask emission from the substrate and that non-linear effects are present. Additional information is contained in the original extended abstract.
Moderate Resolution Imaging Spectroradiometer (MODIS) and Visible Infrared Imaging Radiometer Suite (VIIRS) are major instruments for Earth science observations.Nearly 40 MODIS scientific products and a wide range of VIIRS environmental data records are produced using their global observations. The consistency of the MODIS and VIIRS calibrated data is important for the study of Earth science. This article assesses the calibration consistency of the Aqua MODIS and VIIRS thermal emissive band (TEB) data. To remove the impact of the mismatched relative spectral response (RSR) on the comparisons, the simultaneous nadir observation data from the cross-track infrared sounder (CrIS) and the infrared atmospheric sounding interferometer (IASI) are used as references in two different methods to independently verify the consistency. The comparisons of the MODIS and VIIRS TEB calibrated data show that the brightness temperature (BT) differences for comparable bands between MODIS and VIIRS are in general within 0.2 K for BT larger than 230 K. The differences of all comparable MODIS and VIIRS TEBs are consistent over time. MODIS measurements agree better with N20 VIIRS than with Suomi National Polar-orbiting Partnership (S-NPP) VIIRS. The S-NPP VIIRS measurements are higher than N20 VIIRS, within 0.1 Kfor long-wave infrared (LWIR) bands and 0.3 K for band M13.
Silicon dioxide coated Al reflectance, solar absorptivity and total normal and hemispherical thermal emissivity, noting application to satellite temperature control
The Visible Infrared Imaging Radiometer Suite (VIIRS) sensor aboard the NOAA-20 (previously JPSS-1) spacecraft has successfully operated since its launch in November, 2017. Similar to the first VIIRS instrument on the Suomi-NPP spacecraft, data is collected in 22 spectral bands that are calibrated by a set of onboard calibrators. This paper provides an overview of the NOAA-20 VIIRS on-orbit operation and calibration, with a particular focus on the thermal emissive bands (TEBs). Results presented in this paper include the on-orbit changes in the TEB spectral band responses, detector noise characterization, and key calibration parameters, such as the non-linear coefficients derived from the blackbody warm-up cool-down cycle. Other issues, such as the early mission long-wave infrared (LWIR) response degradation due to icing on the dewar window, and their impact on sensor calibration are also discussed. Since launch, the VIIRS instrument temperature has been stable to within ± 0.8K and the cold focal plane temperatures are well controlled with variations less than 40 mK. With the exception of the early degradation observed in the LWIR bands, the TEB gains have been stable to within 0.04% (except I5 at 0.07%). Based on the current performance, VIIRS is expected to meet its calibration requirements throughout its design lifetime.
Among the most important discoveries made during the Mars Global Surveyor (MGS) mission was that the rocky materials of Mars are broadly divisible into two distinct rock types. The geological significance of this finding is dependent on the mineralogy of these rock types as well as their geographic and stratigraphic positions. Much work has yet to be done to understand these relationships and the small-scale variability of these units. For now, it is worth considering various scenarios that could have resulted in Mars global-scale mineralogical dichotomy. Such work will make clearer what must be looked for in Thermal Emission Spectrometer (TES) and Thermal Imaging Spectrometer (THEMIS) data, what to test with other data sets, and what geological processes can be considered or ruled out as we advance with interpreting Martian geologic history. Here, we suggest that exogenic coatings of secondary silica on basaltic rocks may provide a plausible explanation for the newly discovered distribution of rock types.
Establishing the calibration consistency between satellite measurements is an essential step in the implementation of a long-term global monitoring plan, which often leads to sensor calibration improvements. The Suomi National Polar-Orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) is a polar-orbiting Earth remote sensing instrument built with a strong Moderate Resolution Imaging Spectroradiometer (MODIS) heritage. The center wavelengths of all VIIRS thermal emissive bands (TEBs) match well with those of MODIS with the exception of VIIRS TEB M15 (10.7μm). Previous work from the MODIS Characterization Support Team (MCST) at the NASA/GSFC used specific Earth surface targets to track the long-term consistency,stability, and relative bias between the two MODIS instruments onboard the Terra and Aqua satellites. Using similar methodologies, this paper evaluates the TEB calibration consistency between the MODIS instruments and S-NPP VIIRS over Dome Concordia (Dome-C). The Dome-C site is uniformly snow-covered and the atmospheric effects are small in the surrounding area. Near-surface air temperature measurements from an Automatic Weather Station (AWS) are used as a reference to track each sensor’s calibration stability and determine the relative bias between the MODIS and VIIRS instruments. The results of this study provide a quantitative assessment of the S-NPP VIIRS TEB mission-long performance.
The Visible Infrared Imaging Radiometer Suite (VIIRS) sensor aboard the NOAA-20 (previously JPSS-1) spacecraft has successfully operated since its launch in November, 2017. Similar to the rst VIIRS instrument on the Suomi-National Polar-orbiting Partnership (SNPP) spacecraft, the data are collected in 22 spectral bands that are calibrated by a set of onboard calibrators. This paper provides an overview of the NOAA-20 VIIRS on-orbit operation and calibration, with a particular focus on the thermal emissive bands (TEBs). The results presented in this paper include the on-orbit changes in the TEB spectral band responses, detector noise characterization, and key calibration parameters, such as the nonlinear coefcients derived from the blackbody warm-up cool-down cycles. Other issues, such as the early mission long-wave infrared (LWIR) response degradation due to icing on the dewar window, and their impact on sensor calibration are also discussed. Since launch, the VIIRS instrument temperature has been stable to within ±0.8 K and the cold focal plane temperatures are well controlled with variations less than 40 mK. With the exception of the early degradation observed in the LWIR bands, the TEB gains have been stable to within 0.04% (except I5 at 0.07%). Based on the current performance, VIIRS is expected to meet its calibration requirements throughout its design lifetime.
The thermal emission of two palagonitic soils, common visible and near infrared spectral analogs for bright soils on Mars, was measured over the wavelength range of 5 to 25 microns (2000 to 400 cm(exp -1) for several particle size separates. All spectra exhibit emissivity features due to vibrations associated with H2O and SiO. The maximum variability of emissivity is approx. = 20% in the short wavelength region (5 to 6.5 microns, 2000 to 1500 cm(exp -1)), and is more subdued, < 4%, at longer wavelengths. The strengths of features present in infrared spectra of Mars cannot be solely provided by emissivity variations of palagonite; some other material or mechanism must provide additional absorption(s).
We present two algorithms for the separation of spectral features caused by atmospheric and surface components in Thermal Emission Spectrometer (TES) data. One algorithm uses radiative transfer and successive least squares fitting to find spectral shapes first for atmospheric dust, then for water-ice aerosols, and then, finally, for surface emissivity. A second independent algorithm uses a combination of factor analysis, target transformation, and deconvolution to simultaneously find dust, water ice, and surface emissivity spectral shapes. Both algorithms have been applied to TES spectra, and both find very similar atmospheric and surface spectral shapes. For TES spectra taken during aerobraking and science phasing periods in nadir-geometry these two algorithms give meaningful and usable surface emissivity spectra that can be used for mineralogical identification.
This paper compares the calibration consistency of the spectrally-matched thermal emissive bands (TEB) between the Suomi National Polar-orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) and the Aqua Moderate Resolution Imaging Spectroradiometer (MODIS), using observations from their simultaneous nadir overpasses (SNO). Nearly-simultaneous hyperspectral measurements from the Aqua Atmospheric Infrared Sounder(AIRS) and the S-NPP Cross-track Infrared Sounder (CrIS) are used to account for existing spectral response differences between MODIS and VIIRS TEB. The comparison uses VIIRS Sensor Data Records (SDR) in MODIS five-minute granule format provided by the NASA Land Product and Evaluation and Test Element (PEATE) and Aqua MODIS Collection 6 Level 1 B (L1B) products. Each AIRS footprint of 13.5 km (or CrIS field of view of 14 km) is co-located with multiple MODIS (or VIIRS) pixels. The corresponding AIRS- and CrIS-simulated MODIS and VIIRS radiances are derived by convolutions based on sensor-dependent relative spectral response (RSR) functions. The VIIRS and MODIS TEB calibration consistency is evaluated and the two sensors agreed within 0.2 K in brightness temperature.Additional factors affecting the comparison such as geolocation and atmospheric water vapor content are also discussed in this paper.
Measurements of the spatial distribution of 100 micrometers emission are presented for NGC 1275, the central galaxy in the Perseus cluster. The emission is clearly resolved on a kiloparsec level, and has the same flux density as seen by IRAS at an epoch when the nonthermal emission was a factor of 10 higher. This emission which traces the greater part of the luminosity of this galaxy, is thus identified as thermal emission from dust. The emission appears to be distributed more nearly like the low-velocity H-alpha filaments in the core of this galaxy than the starlight, extended nonthermal radio, X-ray emission, or high velocity gas. While the dust might be heated by a star-formation region that is fed by the cooling flow in this cluster, the intracluster gas also appears to be energetically capable of this as well, in which case the dust would be, at least at the present time, the dominant cooling mechanism for the hot gas. The large quantity of dust in NGC 1275 is unlikely to have been created within the galaxy, or in the cooling flow, but was probably accreted from a recent galactic interloper.
Multiple emission angle observations taken by MGS-TES have been used to derive atmospheric opacities and surface temperatures and emissivities with increased accuracy and wavelength coverage. Martian high albedo region surface spectra have now been isolated. Additional information is contained in the original extended abstract.