Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Geometrical quasi-ballistic effects on thermal transport in nanostructured devices

In this work, we employ thermoreflectance thermal imaging to directly measure the steady-state two-dimensional (2D) temperature field generated by nanostructured heat sources deposited on silicon substrate with different geometrical configurations and characteristic sizes down to 400nm. The analysis of the results using Fourier’s law not only breaks down as size scales down, but it also fails to capture the impact of the geometry of the heat source. The substrate effective Fourier thermal conductivities fitted to wire-shaped and circular-shaped structures with identical characteristic lengths are found to display up to 40% mismatch. Remarkably, a hydrodynamic heat transport model reproduces the observed temperature fields for all device sizes and shapes using just intrinsic Si parameters, i.e., a geometry and size-independent thermal conductivity and nonlocal length scale. The hydrodynamic model provides insight into the observed thermal response and of the contradictory Fourier predictions. We discuss the substantial Silicon hydrodynamic behavior at room temperature and contrast it to InGaAs, which shows less hydrodynamic effects due to dominant phonon-impurity scattering.

42 ENGINEERING↗
DOE OSTI2020

Molecular tail chemistry controls thermal transport in fullerene films

Herein we report on the thermal conductivities of alkyl- and indene-group functionalized fullerene derivative thin films as measured via time domain thermoreflectance and steady state thermoreflectance. The thermal conductivities vary from 0.064 ± 0.007 W m – 1 K – 1 for [6,6]-phenyl C 61 -butyric acid methyl ester (PCBM) to 0.15 ± 0.017 W m – 1 K – 1 for indene- C 60 bisadduct at room temperature and do not exhibit significant temperature dependence from 300 to 375 K. In comparison to the thermal conductivity of PCBM, increasing the length of the alkyl chain, as in the case of [6,6]-phenyl C 61 -butyric acid butyl ester, and [6,6]-phenyl C 61 -butyric acid octyl ester leads to higher thermal conductivities. Likewise, increasing the number of alkyl chains attached to the fullerenes as in the case of bisadduct PCBM leads to a higher thermal conductivity compared to that of PCBM. We present atomistic insights into the role of chemical functionalization on the overall heat transfer in these fullerene derivatives by conducting molecular dynamics simulations and lattice dynamics calculations. The thermal conductivities predicted via our atomistic simulations qualitatively agree with the experimental trends for our fullerene derivatives. Lattice dynamics calculations reveal that one of the main factors dictating the ultralow thermal conductivities in fullerene derivatives is the large reduction in modal diffusivities in the molecular crystals as calculated from the Allen-Feldman model, thus providing an explanation for their largely reduced thermal conductivities as compared to that of C 60 crystals. The low diffusivities result from high degrees of localization of Einstein-like vibrations in fullerene derivatives due to the molecular side chains, providing the ability to dial-in the properties of these low thermal conductivity solids via molecular engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Vibrational properties and thermal transport in quaternary chalcogenides: The case of Te-based compositions

Vibrational thermal properties of CuZn 2 InTe 4 , AgZn 2 InTe 4 , and Cu 2 CdSnTe 4 , derived from binary II-VI zinc-blendes, are reported based on first-principles calculations. While the chalcogenide atoms in these materials have the same lattice positions, the cation atom arrangements vary, resulting in different crystal symmetries and subsequent properties. The compositional differences have important effects on the vibrational thermal characteristics of the studied materials, which demonstrate that low-frequency optical phonons hybridize with acoustic phonons and lead to enhanced phonon-phonon scattering and low lattice thermal conductivities. The phonon density of states, mode Grüneisen parameters, and phonon scattering rates are also calculated, enabling deeper insight into the microscopic thermal conduction processes in these materials. Compositional variations drive differences among the three materials considered here; nonetheless, their structural similarities and generally low thermal conductivities (0.5–4 W/m K at room temperature) suggest that other similar II-VI zinc-blende derived materials will also exhibit similarly low values, as also corroborated by experimental data. Finally, this, combined with the versatility in designing a variety of motifs on the overall structure, makes quaternary chalcogenides interesting for thermal management and energy conversion applications that require low thermal conductivity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interfacial thermal transport in spin caloritronic material systems

Interfaces often govern the thermal performance of nanoscale devices and nanostructured materials. As a result, accurate knowledge of thermal interface conductance is necessary to model the temperature response of nanoscale devices or nanostructured materials to heating. Here, we report the thermal boundary conductance between metals and insulators that are commonly used in spin-caloritronic experiments. We use time-domain thermoreflectance to measure the interface conductance between metals such as Au, Pt, Ta, Cu, and Al with garnet and oxide substrates, e.g., NiO, yttrium iron garnet (YIG), thulium iron garnet (TmIG), Cr 2 O 3 , and sapphire. We find that, at room temperature, the interface conductance in these types of material systems range from 50 to 300 MW m –2 K –1 . Furthermore, we also measure the interface conductance between Pt and YIG at temperatures between 80 and 350 K. At room temperature, the interface conductance of Pt/YIG is 170 MW m –2 K –1 and the Kapitza length is ~40 nm. A Kapitza length of 40 nm means that, in the presence of a steady-state heat current, the temperature drop at the Pt/YIG interface is equal to the temperature drop across a 40-nm-thick layer of YIG. At 80 K, the interface conductance of Pt/YIG is 60 MW m –2 K –1 , corresponding to a Kapitza length of ~300 nm.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Nanocrystal-to-Ligand Interfacial Thermal Transport: Plasmonic Indium Tin Oxide to Perylene Diimide Adsorbates

The generation and dissipation of heat in nanocrystals upon optical excitation is a process which may either limit or enhance their performance in certain applications. Using transient absorption spectroscopy, we tracked the flow of heat from plasmonic tin-doped indium oxide (ITO) nanocrystals to surface adsorbed perylenediimide (PDI) molecules upon excitation of the ITO near-infrared plasmon resonance. Here, we rationalize the derivative line shapes observed in the transient absorption bleach features are the result of thermal transfer from the ITO core to surface ligands based on temperature-dependent static absorption studies of the PDI molecules adsorbed on plasmonic ITO. Through a series of pump power dependent measurements, we demonstrate that the PDI heating time is largely fluence independent at the powers measured, while the overall recovery time increases. Elucidating thermal transfer rates at the nanocrystal and organic ligand interface is key for applications such as plasmon mediated photocatalysis, where heating may obfuscate hot carrier transfer processes.

heat dissipation↗
DOE OSTI2020

Thermal transport in compensated semimetals: Effect of electron-electron scattering on Lorenz ratio

It is well known that the electronic thermal conductivity of clean compensated semimetals can be greatly enhanced over the electric conductivity by the availability of an ambipolar mechanism of conduction, whereby electrons and holes flow in the same direction experiencing negligible Coulomb scattering as well as negligible impurity scattering. This enhancement—resulting in a breakdown of the Wiedemann-Franz law with an anomalously large Lorenz ratio—has been recently observed in two-dimensional monolayer and bilayer graphene near the charge neutrality point. In contrast to this, three-dimensional compensated semimetals such as WP 2 and Sb are typically found to show a reduced Lorenz ratio. Here, we investigate the reasons for this difference, focusing on the low-temperature regime where the electron-electron scattering is expected to dominate over other scattering mechanisms. We show that the different regimes of Fermi statistics (nondegenerate electron-hole liquid in graphene versus degenerate electron-hole liquid in compensated semimetals) are not sufficient to explain the reduction of the Lorenz ratio in the latter. We propose that the solution of the puzzle lies in the large separation of electron and hole pockets in momentum space, which allows compensated semimetals to sustain sizable regions of electron-hole accumulation near the contacts. These accumulations suppress the ambipolar conduction mechanism and effectively split the system into two independent electron and hole conductors. We present a quantitative theory of the crossover from ambipolar to unipolar conduction as a function of the size of the electron-hole accumulation regions, and show that it naturally leads to a sample-size-dependent thermal conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Grain Boundary-Limited Thermal Transport in Suspended Thin Graphite across an Unexplored Thickness Regime

Here, we present systematic thermal conductivity (κ) measurements of suspended thin graphite ribbons, 234–527 nm thick, using a four-probe 3ω method. Unlike recent reports of phonon hydrodynamics and exceptionally high κ in micrometer-thick graphite ( Science, 2020), we observe significantly lower κ and no signatures of collective phonon flow in this intermediate thickness regime. Instead, our measured κ lies between few-layer graphene and bulk graphite. These results agree with a first-principles-informed Peierls–Boltzmann transport model with spatially resolved Monte Carlo sampling. Additionally, the temperature for the peak κ shifts lower with increasing thickness, due to the interplay of phonon-boundary and phonon-isotope scattering. Incorporating grain boundary scattering into simulations is necessary to replicate the experimental trends. These findings delineate the boundary between ballistic, hydrodynamic, and diffusive transport regimes in graphite and underscore the dominant role of disorder and geometry in phonon transport in quasi-two-dimensional materials, offering insights for nanoscale thermal management.

Boltzmann transport model↗
DOE OSTI2022

Thermal transport properties and some hydrodynamic-like behavior in three-dimensional topological semimetal $\mathrm{ZrTe}_5$

We report hydrodynamic fluidity in condensed matter physics has been experimentally demonstrated only in a limited number of compounds due to the stringent conditions that must be met. Herein, we performed thermal and electrical transport experiments in three-dimensional topological semimetal ZrTe 5 . By measuring the thermal properties in a wide temperature range, two representative experimental evidences of the hydrodynamics are observed in temperature window between the ballistic and diffusive regimes: a faster evolution of the thermal conductivity than in the ballistic regime and the non-monotonic temperature-dependent effective quasiparticle mean-free-path. In addition, magneto-thermal conductivity results indicate that charged quasiparticles, as well as phonons, may also play an important role in this hydrodynamic-like flow in ZrTe 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Microscopic mechanism of unusual lattice thermal transport in TlInTe 2

We investigate the microscopic mechanism of ultralow lattice thermal conductivity (κ l ) of TlInTe 2 and its weak temperature dependence using a unified theory of lattice heat transport, that considers contributions arising from the particle-like propagation as well as wave-like tunneling of phonons. While we use the Peierls–Boltzmann transport equation (PBTE) to calculate the particle-like contributions (κ l (PBTE)), we explicitly calculate the off-diagonal (OD) components of the heat-flux operator within a first-principles density functional theory framework to determine the contributions (κ l (OD)) arising from the wave-like tunneling of phonons. At each temperature, T, we anharmonically renormalize the phonon frequencies using the self-consistent phonon theory including quartic anharmonicity, and utilize them to calculate κ l (PBTE) and κ l (OD). With the combined inclusion of κ l (PBTE), κ l (OD), and additional grain-boundary scatterings, our calculations successfully reproduce the experimental results. Our analysis shows that large quartic anharmonicity of TlInTe 2 (a) strongly hardens the low-energy phonon branches, (b) diminishes the three-phonon scattering processes at finite T, and (c) recovers the weaker than T –1 decay of the measured κ l .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ion thermal transport in the H-mode edge transport barrier on DIII-D

The power balance ion heat flux in the pedestal region on DIII-D increases and becomes increasingly anomalous (above conventional neoclassical) in experiments with higher temperature and lower density pedestals where the ion collisionality ($v^*_i$) is lowered toward values expected on ITER. Direct measurements of the main-ion temperature are shown to be essential on DIII-D when calculating the ion heat flux due to differences between the temperature of $D^+$ and the more commonly measured $C^{6+}$ impurity ions approaching the separatrix. Neoclassical transport calculations from NEO and non-linear gyrokinetic calculations using CGYRO are consistent with these observations and show that while neoclassical transport plays an important role, the turbulent ion heat flux due to ion scale electrostatic turbulence is significant and can contribute similar or larger ion heat fluxes at lower collisionality. Beam emission spectroscopy and Doppler backscattering measurements in the steep gradient region of the H-mode pedestal reveal increased broadband, long-wavelength ion scale fluctuations for the low $v^*_i$ discharges at the radius where the non-linear CGYRO simulations were run. Taken together, increased fluctuations, power balance calculations, and gyrokinetic simulations show that the above neoclassical ion heat fluxes, including the increases at lower $v^*_i$, are likely due to weakly suppressed ion scale electrostatic turbulence. These new results are based on world first inferred ion and electron heat fluxes in the pedestal region of deuterium plasmas using direct measurements of the deuterium temperature for power balance across ion collisionalities covering an order of magnitude from high $v^*_i$ values of 1.3 down to ITER relevant $v^*_i$ ~0.1.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Significant phase-space-driven thermal transport suppression in BC8 silicon

The BC8 silicon allotrope has a lattice thermal conductivity 1–2 orders of magnitude lower than that of diamond-cubic silicon. In the current work, the phonon density of states, phonon dispersion, and lattice thermal conductivity are investigated by inelastic neutron scattering measurements and first-principles calculations. Flat phonon bands are found to play a critical role in the reduction of lattice thermal conductivity in BC8–Si. Such bands in the low-energy range enhance the phonon scattering between acoustic and low-energy optical phonons, while bands in the intermediate-energy range act as a scattering bridge between the high- and low-energy optical phonons. Further, they significantly enlarge the phonon-phonon scattering phase space and reduces the lattice thermal conductivity in this novel silicon allotrope. This work provides insights into the significant reduction of the lattice thermal conductivity in BC8–Si, thus expanding the understanding of novel silicon allotropes and their development for electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Lattice instabilities and phonon thermal transport in TlBr

Materials with simple crystal structure usually exhibit substantial lattice thermal conductivity ( κ latt ) due to a scarcity of strong phonon-phonon scattering channels. Yet here we find simple CsCl-structure TlBr to have an extremely low room temperature κ latt ~ 0.5 W / m-K , while at low temperature we find a high κ latt of 155 W / m-K . This extreme range of conductivity behavior results from lattice-instability-related anharmonicity, effective only at temperatures above ~ 30 K . Manipulating these instabilities (e.g., pressure, strain) may yield a pathway to ultralow thermal conductivity via intrinsic phonon resistance in similar materials.

36 MATERIALS SCIENCE↗
NASA NTRS2014

Precision Control of Thermal Transport in Cryogenic Single-Crystal Silicon Devices

We report on the diffusive-ballistic thermal conductance of multi-moded single-crystal silicon beams measured below 1 K. It is shown that the phonon mean-free-path is a strong function of the surface roughness characteristics of the beams. This effect is enhanced in diffuse beams with lengths much larger than, even when the surface is fairly smooth, 510 nm rms, and the peak thermal wavelength is 0.6 microns. Resonant phonon scattering has been observed in beams with a pitted surface morphology and characteristic pit depth of 30 nm. Hence, if the surface roughness is not adequately controlled, the thermal conductance can vary significantly for diffuse beams fabricated across a wafer. In contrast, when the beam length is of order, the conductance is dominated by ballistic transport and is effectively set by the beam cross-sectional area. We have demonstrated a uniformity of +/-8% in fractional deviation for ballistic beams, and this deviation is largely set by the thermal conductance of diffuse beams that support the micro-electro-mechanical device and electrical leads. In addition, we have found no evidence for excess specific heat in single-crystal silicon membranes. This allows for the precise control of the device heat capacity with normal metal films. We discuss the results in the context of the design and fabrication of large-format arrays of far-infrared and millimeter wavelength cryogenic detectors.

multi-moded single-crystal silicon beams↗
DOE OSTI2025

High-throughput computational framework for high-order anharmonic thermal transport in cubic and tetragonal crystals

Accurate first-principles prediction of lattice thermal conductivity (κL) remains challenging in identifying materials with extreme thermal behavior. While the harmonic approximation with three-phonon scattering (HA + 3ph) is now routine, reliable κL prediction often requires higher-order anharmonic effects, including self-consistent phonon renormalization, three- and four-phonon scattering, and off-diagonal heat flux (SCPH + 3, 4ph + OD). We present a state-of-the-art high-throughput workflow that unifies these effects and apply it to 773 cubic and tetragonal crystals spanning diverse chemistries and structures. From 562 dynamically stable compounds, we assess the hierarchical impacts of higher-order anharmonicity. For around 60% of materials, HA + 3ph predictions closely match those from SCPH + 3, 4ph + OD. SCPH generally increases κ L , by over 8 times in extreme cases, whereas four-phonon scattering universally suppresses κ L , sometimes to 15% of the HA + 3ph value. Off-diagonal contributions are negligible in high-κ L systems but can rival diagonal terms in highly anharmonic low-κ L compounds. We highlight four case studies, Rb 2 TlAlH 6 , Cu 3 VSe 4 , CuBr, and KTlCl 4 , that exhibit distinct extreme behaviors. This work delivers not only a robust workflow for high-fidelity κL dataset but also a quantitative framework to determine when higher-order effects are essential. The hierarchy of κ L results, from the HA + 3ph to SCPH + 3, 4ph + OD level, offers a scalable, interpretable route to discovering next-generation extreme thermal materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Accurate and Efficient Parametric Model-Order Reduction for Turbulent Thermal Transport

This project produced new algorithms and software for low-cost exploration of turbulent thermal-fluids behavior under parametric variation by using reduced-order models (ROMs). The ROMs numerically solve the governing equations for fluid motion by using a small set of basis functions (typically, N=20-200 modes) to represent the solution. The base modes are computed as optimal combinations of solutions from expensive high-fidelity "anchor-point" solutions involving millions of unknowns, which are typically generated by solving the full Navier-Stokes equations on a supercomputer. The ROM solution is itself a combination of the base modes, where the basis coefficients are determined by evolving an NxN system of nonlinear equations. The overarching idea is to use the inexpensive ROM to predict solutions under conditions where the parameters differ from the anchor-point conditions. Several ingredients are required to make ROMs useful for thermal hydraulics analysis. These include: a stable and accurate ROM that is capable of reproducing the large-scale dynamics of turbulent flow, error indicators than can guide the choice of anchor points, and low-cost mechanisms for evaluating nonlinear terms in the reduced equations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

First-principles determination of the phonon-point defect scattering and thermal transport due to fission products in ThO 2

This work presents the first-principles calculations of the lattice thermal conductivity degradation due to point defects in thorium dioxide using an iterative solution of the Pierels-Boltzmann transport equation. We have used the non perturbative Green’s function methodology to compute the phonon- point defect scattering rates that consider the local distortion around the point defect, including the mass difference changes, interatomic force constants, and structural relaxation near the point defects. The point defects considered in this work include the vacancy of thorium ($V$ $TH$ ) and oxygen ($V$ $O$ ), substitutions of helium ($He$ $Th$ ), krypton ($Kr$ $Th$ ), zirconium ($Zr$ $Th$ ), iodine ($I$ $Th$ ) and xenon ($Xe$ $Th$ ) in the thorium site, and the three different configurations of the Schottky defects. The results of the phonon-defect scattering rate reveal that, among all the considered intrinsic defects, the thorium vacancy and helium substitution in the thorium site scatter the phonon most due to the substantial changes in the force constant and structural distortions. The scattering of phonons due to the substitutional defects unveils that the zirconium atom scatters phonons the least, followed by xenon, iodine, krypton, and helium. This is contrary to the intuition that the scattering strength follows $He$ $Th$ > $Kr$ $Th$ > $Zr$ $Th$ > $I$ $Th$ > $Xe$ $Th$ based on the mass difference. This striking difference in the zirconium phonon scattering is due to the local chemical environment changes. Zirconium is an electropositive element with valency similar to thorium and, therefore, can bond with the oxygen atoms, thus creating less force constant variance compared to iodine, an electronegative element noble gas helium, xenon, and krypton. In conclusion, these results can serve as the benchmark for the analytical models and help the engineering-scale modeling effort for nuclear design.

36 MATERIALS SCIENCE↗
NASA NTRS1989

The effect of ballooning modes on thermal transport and magnetic field diffusion in the solar corona

Presently favored mechanisms of coronal heating (current sheet dissipation and Alfven wave resonant heating) deposit heat in thin layers. Classical thermal conduction cannot explain how heat is transported across the magnetic field. If heating occurs in thin layers, large pressure gradients can be created which can give rise to ballooning modes. These instabilities are caused by the pressure gradient and the curvature of the magnetic field, and are stabilized by magnetic tension. The modes are broad band in wavelength and should produce turbulence. A mixing length expression for the turbulent heat transport shows that it is more than adequate to rapidly convect heat into much broader layers. Furthermore, the turbulent resistivity implies that heating occurs over most of the width of these broadened layers. The broadening also implies that much shorter time scales are required for heating. The beta values in the corona suggest that 1-10 turbulent layers are formed in typical loop or arch structures.

Strauss, H. R.↗
DOE OSTI2020

GaN thermal transport limited by the interplay of dislocations and size effects

Measurements and first-principles calculations probe the temperature-dependent thermal conductivity (k) of GaN films with large densities of highly oriented dislocations. We demonstrate that phonon-dislocation scattering is weaker than suggested by previous measurements, likely due to sample and experiment size effects. Nonetheless, dislocation-limited k is observed in samples with large dislocation densities and at lower temperatures where k anisotropy is also observed. Combination of experiment and theory give insights into the interplay of thermal resistance mechanisms limiting GaN functionalities and suggest pathways for tuning k via defect engineering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗