Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermoelectric materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

New Thermoelectric Materials and Devices for Terrestrial Power Generators

The development of new, more efficient, materials and devices is the key to expand the range of appplications of thermoelectric generators. New potential terrestrial applications have been recently described in the literature. There exists a wide range of heat source temperatures for these applications. Recent results on novel materials have demonstrated that ZT values significantly larger that 1.0 could be obtained in the 475 to 975K temperature range. These materials are excellent candidates to be used in terrestrial thermoelectric power generators using waste heat or liquid fuels.

thermoelectric↗
NASA NTRS2015

Analysis of Advanced Thermoelectric Materials and Their Functional Limits

The world's demand for energy is increasing dramatically, but the best energy conversion systems operate at approximately 30% efficiency. One way to decrease energy loss is in the recovery of waste heat using thermoelectric (TE) generators. A TE generator is device that generates electricity by exploiting heat flow across a thermal gradient. The efficiency of a TE material for power generation and cooling is determined by the dimensionless Figure of Merit (ZT): ZT = S(exp. 2)sigmaT/κ: where S is the Seebeck coefficient, sigma is the electrical conductivity, T is the absolute temperature, and κ is the thermal conductivity. The parameters are not physically independent, but intrinsically coupled since they are a function of the transport properties of electrons. Traditional research on TE materials has focused on synthesizing bulk semiconductor-type materials that have low thermal conductivity and high electrical conductivity affording ZT values of 1. The optimization of the σ/κ ratio is difficult to achieve using current material formats, as these material constants are complementary. Recent areas of research are focusing on using nanostructural artifacts that introduce specific dislocations and boundary conditions that scatter the phonons. This disrupts the physical link between thermal (phonon) and electrical (electron) transport. The result is that κ is decreased without decreasing σ. These material formats give ZT values of up to 2 which represent approximately 18% energy gain from waste heat recovery. The next challenge in developing the next generation of TE materials with superior performance is to tailor the interconnected thermoelectric physical parameters of the material system. In order to approach this problem, the fundamental physics of each parameter S, sigma, and κ need to be physically understood in their context of electron/phonon interaction for the construction of new high ZT thermoelectric devices. Is it possible to overcome the physical limit imposed by of the effect of phonon lattice oscillation and energetic electrons towards thermal conductivity? Is the Seebeck coefficient, based on the difference in voltage over temperature gradient ( deltaV/deltaT), an intrinsic parameter of each material? All these parameters were manipulated using nano-bridge and twin-lattice structural concepts at the NASA Langley Research Center. This talk will review the current trend of TE research to optimize the ZT and discuss about new approaches on increasing ZT within functional limits of each parameter.

Kim, Hyun Jung↗
DOE OSTI2023

Elastic Moduli: a Tool for Understanding Chemical Bonding and Thermal Transport in Thermoelectric Materials

Abstract The elastic behavior of a material can be a powerful tool to decipher thermal transport. In thermoelectrics, measuring the elastic moduli—directly tied to sound velocity—is critical to understand trends in lattice thermal conductivity, as well as study bond anharmonicity and phase transitions, given the sensitivity of elastic moduli to the chemical bonding. In this review, we introduce the basics of elasticity and explain the origin of high‐temperature lattice softening from a bonding perspective. We then review elasticity data throughout classes of thermoelectrics, and explore trends in sound velocity, anharmonicity, and thermal conductivity. We reveal how experimental sound velocities can improve the accuracy of common thermal conductivity models and present a critical discussion of Grüneisen parameter estimates from elastic moduli. Readers will be equipped with tools to leverage elasticity measurements or calculations to accurately interpret thermal transport trends.

Isotta, Eleonora↗
DOE OSTI2023

Elastic Moduli: a Tool for Understanding Chemical Bonding and Thermal Transport in Thermoelectric Materials

Abstract The elastic behavior of a material can be a powerful tool to decipher thermal transport. In thermoelectrics, measuring the elastic moduli—directly tied to sound velocity—is critical to understand trends in lattice thermal conductivity, as well as study bond anharmonicity and phase transitions, given the sensitivity of elastic moduli to the chemical bonding. In this review, we introduce the basics of elasticity and explain the origin of high‐temperature lattice softening from a bonding perspective. We then review elasticity data throughout classes of thermoelectrics, and explore trends in sound velocity, anharmonicity, and thermal conductivity. We reveal how experimental sound velocities can improve the accuracy of common thermal conductivity models and present a critical discussion of Grüneisen parameter estimates from elastic moduli. Readers will be equipped with tools to leverage elasticity measurements or calculations to accurately interpret thermal transport trends.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1980

Refractory thermoelectric materials

The Seebeck coefficient and electrical resistivity of boron-carbon (B-C) and boron-carbon-silicon (B-C-Si)) P-type alloys are reported for temperatures up to 500 C. Using available literature values for the thermal conductivity of B-C alloys, thermoelectric figure-of-merit values of 1.37 x 10 to the -5th and 1.20 x 10 to the -4th/deg C are calculated for 100 and 500 C, respectively. Sulfur-deficient rare earth sesquisulfide N-type alloys exhibit Seebeck coefficients which are relatively insensitive to alloy composition over the composition range investigated but are very sensitive to fabrication parameters.

Elsner, N. B.↗
DOE OSTI2020

All-Inorganic Halide Perovskites as Potential Thermoelectric Materials: Dynamic Cation off-Centering Induces Ultralow Thermal Conductivity

Halide perovskites are anticipated to impact next generation high performance solar cells because of their extraordinary charge transport and optoelectronic properties. However, their thermal transport behavior has received limited attention. In this work, we studied the thermal transport and thermoelectric properties of the CsSnBr 3–x I x perovskites. We find a strong correlation between lattice dynamics and an ultralow thermal conductivity for series CsSnBr 3–x I x reaching 0.32 Wm –1 K –1 at 550 K. The CsSnBr 3–x I x also possess a decent Seebeck coefficient and controllable electrical transport properties. The crystallography data and theoretical calculations suggest the Cs atom deviates from its ideal cuboctahedral geometry imposed by the perovskite cage and behaves as a heavy atom rattling oscillator. This off-center tendency of Cs, together with the distortion of SnX 6 (X = Br or I) octahedra, produces a highly dynamic and disordered structure in CsSnBr 3–x I x , which gives rise to a very low Debye temperature and phonon velocity. Moreover, the low temperature heat capacity data suggests strong coupling between the low frequency optical phonons and heat carrying acoustical phonons. In conclusion, this induces strong phonon resonance scattering that induces the ultralow lattice thermal conductivity of CsSnBr 3–x I x .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1971

Adavanced RTG and thermoelectric materials study

A comprehensive, generalized two-dimensional RTG analysis computer program was developed. This program is capable of analyzing any specified RTG design under a wide range of transient as well as steady-state operating conditions. The feasibility of a new concept for the design of segmented (or single-phase) thermoelectric couples was demonstrated. A SiGe-PbTe segmented couple involving pressure contacted junctions at the intermediate- and hot-junction temperatures was successfully encapsulated in a hermetically sealed bellows enclosure. This bellows-encapsulated couple was operated between a hot- and cold-junction temperature of 1200 K and 450 K, respectively, with a measured energy conversion efficiency of 7.6 + or - .5 per cent. An experimental study of selected sublimation barrier schemes revealed that a significant reduction in the sublimation rate of p-type PbTe could be achieved by using multiple layers of SiO2 fibers. A comparison of the barrier effectiveness is given for three different barrier designs.

Eggers, P. E.↗
DOE OSTI2020

A plausible method of preparing the ideal p-n junction interface of a thermoelectric material by surface doping

Recent advances in two-dimensional (2D) crystals make it possible to realize an ideal interface structure that is required for device applications. Specifically, a p-n junction made of 2D crystals is predicted to exhibit an atomically well-defined interface that will lead to high device performance. Using angle-resolved photoemission spectroscopy, a simple surface treatment was shown to allow the possible formation of such an interface. Furthermore, Ta adsorption on the surface of a p-doped SnSe shifts the valence band maximum towards the higher binding energy due to the charge transfer from Ta to SnSe that is highly localized at the surface due to the layered structure of SnSe. As a result, the charge carriers of the surface are changed from holes of its bulk characteristics to electrons, while the bulk remains as a p-type semiconductor. This observation suggests that the well-defined interface of a p-n junction with an atomically thin n-region is formed between Ta-adsorbed surface and bulk.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Zintl pnictides Yb10CdSb9 and Yb14CdSb11: New candidate thermoelectric materials

The synthesis of new materials is the lifeline of solid-state science, and it continues to offer us unique opportunities for testing various theoretical formulations and models on a practical material. Such an avenue, therefore, provides a breeding ground for technological innovations and advancements that can completely revolutionize our world. Here, we report the results of our exploratory syntheses in the Yb–Cd–Sb compositional space that lead to the identification of two new Zintl antimonides, namely, Yb10CdSb9 and Yb14CdSb11. Their crystal structures were established via single-crystal X-ray diffraction methods; the basic electronic and transport properties of the new materials were also characterized. Yb10CdSb9 crystallizes in a disordered variant of the tetragonal Ca10LiMgSb9 structure type with unit cell parameters a = 11.8473(8) Å and c = 17.1302(12) Å (space group P42/mnm). Yb14CdSb11 crystallizes in the tetragonal Ca14AlSb11 structure type with unit cell parameters: a = 16.605(3) Å and c = 12.144(7) Å (space group I41/acd). Although the structures of both compounds can be rationalized within the framework of the Zintl formalism, based on the partitioning of the valence electrons in the much disordered Yb10CdSb9 phase, the charge is indicative of a slightly electron-rich composition. Electronic structure calculations in both cases support the notion of intrinsic semiconductor behavior, as expected for a Zintl phase. The temperature dependence of the electrical resistivity of a single crystal of Yb10CdSb9 is in line with that, and the evolution of the Seebeck coefficient indicates an electron-dominated transport mechanism, and a respectable power factor of 0.71 μW/cm K2 at 460 K can be calculated for Yb10CdSb9. The electrical resistivity of Yb14CdSb11, however, evolves in a semimetallic manner, which could suggest an overdoped sample or degenerate semiconducting behavior.

Ogunbunmi, Michael O. (ORCID:0000000253409198)↗