SEARCH · Search NASA

Results for “thompson”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Interfacial Strong Coupling and Negative Dispersion of Propagating Polaritons in Freestanding Oxide Membranes

Membranes of complex oxides like perovskite SrTiO3 extend the multi-functional promise of oxide electronics into the nanoscale regime of 2D materials. Here, it is demonstrated that freestanding oxide membranes supply a reconfigurable platform for nano-photonics based on propagating surface phonon polaritons. Infrared near-field imaging and spectroscopy enabled by a tunable ultrafast laser are applied to study pristine nano-thick SrTiO3 membranes prepared by hybrid molecular beam epitaxy. As predicted by coupled mode theory, it is found that strong coupling of interfacial polaritons realizes symmetric and antisymmetric hybridized modes with simultaneously tunable negative and positive group velocities. By resolving reflection of these propagating modes from membrane edges, defects, and substrate structures, their dispersion is quantified with position-resolved nano-spectroscopy. Remarkably, polariton negative dispersion is found to be both robust and tunable through choice of membrane dielectric environment and thickness, and proposes a novel design for in-plane Veselago lensing harnessing this control. This work lays the foundation for tunable transformation optics at the nanoscale using polaritons in a wide range of freestanding complex oxide membranes.

freestanding oxide membranes↗

DOE OSTI2025

Deformation Behaviors in Single BCC‐Phase Refractory Multi‐Principal Element Alloys under Dynamic Conditions

The mechanical behavior and microstructural evolution of a BCC-phase NbTaTiV refractory multi-principal element alloy (RMPEA) is studied over a wide range of strain rates (10 −3 to 10 3 s −1 ) and temperatures (room temperature to 850 °C). The mechanical property of present RMPEA shows less strain-rate dependence and strong resistance to softening at high temperatures. Under high strain-rate loading, the formation of thin type-I twins is observed, which could lead to an increase in strain-hardening rates. However, this hardening mechanism competes with adiabatic heating effects, resulting in the deterrence of strain-hardening behaviors. In contrast, substantial strain-hardening occurs at cryogenic temperatures due to the formation of twins, which act as stronger barriers to dislocation motion and interact with each other. To further understand the different strain-hardening behaviors, density functional theory (DFT) calculations predict relatively low stacking fault energies and high twinning stress for the NbTaTiV RMPEA.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Manipulation of Emergent Collective Excitations via Composition Control in Mixed MPX 3 Correlated 2D Antiferromagnets

Transition metal (i.e., Mn, Fe, Cr) and chalcogen (Se) substituents are introduced into single-crystalline NiPS 3 , and the evolution of the two emergent quasi-particle excitations characteristic to the XXZ correlated antiferromagnetism of NiPS 3 (i.e., spin orbit entangled exciton (SOX) and two-magnon scattering (2M )) are investigated as functions of substituent concentration through comprehensive room- and low-temperature photoluminescence (PL) and Raman spectroscopy studies. These findings are further correlated with the magnetic properties of the same set of compounds reported in prior studies. The work revealed that the SOX emission intensities and linewidths are mainly controlled by the magnetic anisotropy and spin orientations, and are strongly suppressed by the introduction of substituents. The suppression depends on the type of substituent, with Fe affecting the SOX emission more than Mn and Cr. The 2 M scattering is linked to short-range correlations and exhibits greater resiliency against metal atom substitution. While the 2M peak at low temperature gets suppressed and red-shifted in frequency with increasing concentrations of all the substituents, Fe induces the weakest suppression compared to all other substituents. Altogether, these findings revealed the introduction of substituents as a powerful route to control the emergent collective excitations in NiPS 3 and mixed-MPX 3 materials.

2D magnet↗

DOE OSTI2021

Sulfurization Engineering of One–Step Low–Temperature MoS 2 and WS 2 Thin Films for Memristor Device Applications

2D materials have been of considerable interest as new materials for device applications. Non-volatile resistive switching applications of MoS 2 and WS 2 have been previously demonstrated; however, these applications are dramatically limited by high temperatures and extended times needed for the large-area synthesis of 2D materials on crystalline substrates. The experimental results demonstrate a one-step sulfurization method to synthesize MoS 2 and WS 2 at 550 °C in 15 min on sapphire wafers. Furthermore, a large area transfer of the synthesized thin films to SiO 2 /Si substrates is achieved. Following this, MoS 2 and WS 2 memristors are fabricated that exhibit stable non-volatile switching and a satisfactory large on/off current ratio (10 3 –10 5 ) with good uniformity. Tuning the sulfurization parameters (temperature and metal precursor thickness) is found to be a straightforward and effective strategy to improve the performance of the memristors. Furthermore, the demonstration of large-scale MoS 2 and WS 2 memristors with a one-step low-temperature sulfurization method with simple strategy to tuning can lead to potential applications such as flexible memory and neuromorphic computing.

36 MATERIALS SCIENCE↗

DOE OSTI2022

CO 2 absorption intensification using three-dimensional printed dynamic polarity packing in a bench-scale integrated CO 2 capture system

Postcombustion carbon capture using a chemical absorbent is a promising technology to reduce CO 2 emission. However, the overall construction and operating costs remain a major challenge. In order to intensify the absorption process and to reduce these costs, a novel dynamic polarity structured packing (DP packing) with alternate patterns of surface polarity has been developed to enhance local macro-scale turbulence within the advanced viscous solvent to reduce the mass transfer diffusion resistance. Here, three DP structured packings that incorporate multiple polymeric materials were fabricated using three-dimensional printing technique and evaluated through parametric testing using a bench-scale integrated CO 2 capture unit with 76.2 mm ID absorber. At optimized operating conditions, the DP packing showed a relative 22.7% increase in absorption and 20.0% decrease in energy penalty.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2023

Carbonic anhydrase textile structured packing for efficient CO 2 absorption in methyldiethanolamine solvent

Carbonic anhydrase (CA) is an attractive biodegradable catalyst for CO 2 absorption in solvent–based CO 2 capture. However, maintaining the stability of CA as a homogeneous component of the solvents is a challenge. Solvent regeneration temperature typically exceeds the enzyme thermal tolerance, which leads to CA deactivation. To reduce the need for frequent CA replenishment and to avoid inactive CA accumulation in the solvent, this work shows the benefits of an immobilization strategy where CA is fixed in a second–generation design of textile structured packing (CATSP–2) modules. The enzyme–immobilized packing showed 1.5 times better performance in CO 2 separation compared with traditional structured packing with a corresponding increased CO 2 loading in the rich solvent. The modules exhibited good CA activity retention of ~80% during the tests without any CA replenishment. As a result, applying CATSP–2 could potentially decrease the packing height and absorber column size for a lower cost per amount of CO 2 captured.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Magnetic nanoparticle‐induced sorbent regeneration for direct air capture

Direct air capture (DAC) is a promising technology for decarbonization through the removal of CO 2 from the atmosphere. In many DAC processes, the regeneration energy used to restore the capture capacity of sorbents accounts for a significant fraction of the energy required by the whole process. Here we report an effective and scalable sorbent regeneration method for liquid DAC solvents based on magnetic nanoparticles (MNPs) heating with AC magnetic fields. MNPs can be directly heated to provide uniform and rapid volumetric heating, as we demonstrate by promoting the release of captured CO 2 from an aqueous solution of potassium sarcosinate. Our results showed that 90% of the solvent can be regenerated within 7.5 min of heating through proposed technique. The MNPs and solvent are found to be stable during the regeneration process and the MNPs showed long-term stability in the CO 2 -saturated solvent. Cyclic experiments showed that the nanoparticles can be reused for multiple cycles without performance deterioration. The process is operated in a noncontact mode through electromagnetic waves, making it an adoptable approach for existing carbon capture systems. The MNPs heating provides an effective regeneration strategy for liquid solvents used in carbon capture processes, in particular for DAC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Foaming prediction in pure liquids from dimensionless numbers inspired by the theory of fluid behavior for drops

Foaming prediction is critical for selecting materials and designing processes in industries such as bioprocessing and gas processing. Existing models lack the generality needed for a wide range of materials and overlook the foaming behavior in pure liquids. Here, this work presents a novel method for predicting foaming in pure liquids based on their density, surface tension, and viscosity, using Reynolds ( Re ) and Ohnesorge ( Oh ) numbers. A foaming prediction map, leveraging the theory of fluid drop behavior, was developed by plotting these numbers. This map delineates distinct non-foaming and foaming regions, functioning as a binary classifier for foaming predictions. The map was fitted and validated through shake test experiments on 46 liquids, demonstrating reliable predictions, except for a specific region characterized by small Oh and large Re numbers. This region corresponded to relatively low foam stability and high turbulence, making foaming predictions challenging for liquids in this category.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Association of clonal hematopoiesis mutations with clinical outcomes: A systematic review and meta-analysis

Clonal hematopoiesis (CH) mutations are common among individuals without known hematologic disease. CH mutations have been associated with numerous adverse clinical outcomes across many different studies. We systematically reviewed the available literature for clinical outcomes associated with CH mutations in patients without hematologic disease. We searched PubMed, EMBASE, and Scopus for eligible studies. Three investigators independently extracted the data, and each study was verified by a second author. Risk of bias was assessed using the Newcastle-Ottawa Scale. We identified 32 studies with 56 cohorts that examine the association between CH mutations and clinical outcomes. We conducted meta-analyses comparing outcomes among individuals with and without detectable CH mutations. We conducted meta-analyses for cardiovascular diseases (nine studies; HR = 1.61, 95% CI = 1.26–2.07, p = .0002), hematologic malignancies (seven studies; HR = 5.59, 95% CI = 3.31–9.45, p < .0001), therapy-related myeloid neoplasms (four studies; HR = 7.55, 95% CI = 4.3–13.57, p < .001), and death (nine studies; HR = 1.34, 95% CI = 1.2–1.5, p < .0001). The cardiovascular disease analysis was further stratified by variant allele fraction (VAF) and gene, which showed a statistically significant association only with a VAF of ≥ 10% (HR = 1.42, 95% CI = 1.24–1.62, p < .0001), as well as statistically significant associations for each gene examined with the largest magnitude of effect found for CH mutations in JAK2 (HR = 3.5, 95% CI = 1.84–6.68, p < .0001). Analysis of the association of CH mutations with hematologic malignancy demonstrated a numeric stepwise increase in risk with increasing VAF thresholds. This analysis strongly supports the association of CH mutations with a clinically meaningful increased risk of adverse clinical outcomes among individuals without hematologic disease, particularly with increasing VAF thresholds.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

Systems Analysis and Optimization of Circular PET Packaging Supply Chains in the United States: Environmental and Socioeconomic Impacts

Many actions are underway at global, national, and local levels to address the plastic waste problem and transition toward a circular economy of plastics. Studies evaluating environmental and socioeconomic impacts of such a transition are lacking. Here, the purpose of this study is to conduct a national systems analysis of polyethylene terephthalate (PET) packaging supply chains in the United States. Material flow data was combined with environmental and socioeconomic indicators to evaluate and compare the sustainability of the linear PET packaging supply chain, current (2019) supply chain, and possible future circular supply chain options in the United States. Environmentally optimal circular US PET packaging material flows showed 31% and 38% savings of GHG emissions and energy demand, respectively, with a circularity of 77% when compared with a linear supply chain. Additionally, the environmentally optimal system showed higher employment (29%) and wages (31%) than a linear system, but with a 5% decrease in revenue generation. A socioeconomically optimal circular PET supply chain showed increased employment (by 52%), wages (by 67%), and revenues (by 1%), with a circularity of 59% when compared with the linear system. However, it showed 14% higher GHG emissions than a linear system, indicating a trade-off between environmentally and socioeconomically optimal circular PET packaging systems. Overall, linear-to-circular material flow transition may not necessarily lead to increased revenues and decreased environmental impacts of the entire system, but it does benefit society due to increased employment and wages. Future systems analysis work should focus on improving data quality for environmental and socioeconomic dimensions.

PET↗

DOE OSTI2020

Polymer Zwitterions for Stabilization of CsPbBr 3 Perovskite Nanoparticles and Nanocomposite Films

Abstract Functional polymers with sulfobetaine or phosphorylcholine zwitterions as pendent groups are demonstrated as both ligands and host matrices for CsPbBr 3 perovskite nanoparticles (PNPs). These polymers produce nanocomposite films with excellent NP dispersion, optical transparency, and impressive resistance to NP degradation upon exposure to water. Multidentate interactions of the zwitterion‐containing copolymers with the PNPs induce dispersed or weakly aggregated nanocomposite morphologies, depending on the extent of zwitterionic functionality in the polymer. Incorporating additional functionality into the polymers, such as benzophenone pendent groups, yields lithographically patternable films, while time‐resolved photoluminescence measurements provide insight into the electronic impact of PNPs in zwitterionic polymer matrices.

Kim, Hyunki↗

DOE OSTI2024

Catalytically Active Site Mapping Realized through Energy Transfer Modeling

Abstract The demands of a sustainable chemical industry are a driving force for the development of heterogeneous catalytic platforms exhibiting facile catalyst recovery, recycling, and resilience to diverse reaction conditions. Homogeneous‐to‐heterogeneous catalyst transitions can be realized through the integration of efficient homogeneous catalysts within porous matrices. Herein, we offer a versatile approach to understanding how guest distribution and evolution impact the catalytic performance of heterogeneous host–guest catalytic platforms by implementing the resonance energy transfer (RET) concept using fluorescent model systems mimicking the steric constraints of targeted catalysts. Using the RET‐based methodology, we mapped condition‐dependent guest (re)distribution within a porous support on the example of modular matrices such as metal–organic frameworks (MOFs). Furthermore, we correlate RET results performed on the model systems with the catalytic performance of two MOF‐encapsulated catalysts used to promote CO 2 hydrogenation and ring‐closing metathesis. Guests are incorporated using aperture‐opening encapsulation, and catalyst redistribution is not observed under practical reaction conditions, showcasing a pathway to advance catalyst recyclability in the case of host–guest platforms. These studies represent the first generalizable approach for mapping the guest distribution in heterogeneous host–guest catalytic systems, providing a foundation for predicting and tailoring the performance of catalysts integrated into various porous supports.

Thompson, William J.↗

DOE OSTI2025

Sequential Infiltration Synthesis of Cadmium Sulfide Discrete Atom Clusters

Abstract Exposure of soft material templates to alternating volatile chemical precursors can produce inorganic deposition within the permeable template (e.g. a polymer thin film) in a process akin to atomic layer deposition (ALD). While such sequential infiltration synthesis (SIS) processes have now been demonstrated for many metal oxides, we report an SIS process for a transition metal sulfide – CdS. Gas phase dimethyl cadmium and hydrogen sulfide precursors infiltrated into poly(4‐vinylpyridine) thin films result in the 3D‐nucleation of clusters consistent with a cubane‐type Cd 4 S 4 core that are variably terminated with methyl, thiol and hydroxy capping ligands. First principles models and simulation of few‐atom Cd‐based clusters are consistent with electronic and vibrational spectroscopy and grazing‐incidence total X‐ray scattering measurements of 3D‐cluster‐arrays synthesized at 80 °C. The direct synthesis of few‐atom transition metal sulfide clusters within polymer thin films will provide a versatile new route to precision architectures for light‐absorbing materials including solar energy harvesting and conversion applications.

Jayaweera, Nuwanthaka P. [Material Science Divisio↗

DOE OSTI2025

Protein–Protein Complex Stability Controls Substrate Scope in a β‐Ketoacyl‐ACP Reductase Specific for Medium Chains

Assembly-line enzymes carry out multistep synthesis of important metabolites by using acyl carrier proteins (ACPs) to shuttle intermediates along defined sequences of active sites. Despite longstanding interest in reprogramming these systems for metabolic engineering and biosynthetic chemistry, the mechanisms underlying their reaction order remain poorly understood and difficult to control. In this work, we describe a β-ketoacyl-ACP reductase from Pseudomonas putida (PpFabG4) with an unusual selectivity for medium chains and use it to explore the molecular basis of substrate specificity in enzymes that pull intermediates from fatty acid synthesis, a common route to specialized products. X-ray crystallography shows no obvious barriers to short-chain binding. Molecular simulations and supporting mutational analyses indicate that substrate preference arises instead from a weak enzyme–ACP interaction that is stabilized by medium acyl chains but not by short chains. Indeed, mutations that strengthen this interaction for PpFabG4 or weaken it for EcFabG, an Escherichia coli β-ketoacyl-ACP reductase with a broad substrate specificity, can enhance or reduce activity on short-chain substrates by over 100-fold. Our findings show how the stability of enzyme-ACP interactions can control substrate scope in promiscuous enzymes and guide the exchange of intermediates between (and within) assembly-line systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Polymer Zwitterions for Stabilization of CsPbBr 3 Perovskite Nanoparticles and Nanocomposite Films

Functional polymers with sulfobetaine or phosphorylcholine zwitterions as pendent groups are demonstrated as both ligands and host matrices for CsPbBr 3 perovskite nanoparticles (PNPs). These polymers produce nanocomposite films with excellent NP dispersion, optical transparency, and impressive resistance to NP degradation upon exposure to water. Multidentate interactions of the zwitterion-containing copolymers with the PNPs induce dispersed or weakly aggregated nanocomposite morphologies, depending on the extent of zwitterionic functionality in the polymer. Incorporating additional functionality into the polymers, such as benzophenone pendent groups, yields lithographically patternable films, while time-resolved photoluminescence measurements provide insight into the electronic impact of PNPs in zwitterionic polymer matrices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Structural and Dynamic Analysis of Sulphur Dioxide Adsorption in a Series of Zirconium-Based Metal–Organic Frameworks

We report reversible high capacity adsorption of SO 2 in robust Zr-based metal–organic framework (MOF) materials. Zr-bptc (H 4 bptc=biphenyl-3,3',5,5'-tetracarboxylic acid) shows a high SO 2 uptake of 6.2 mmol g -1 at 0.1 bar and 298 K, reflecting excellent capture capability and removal of SO 2 at low concentration (2500 ppm). Dynamic breakthrough experiments confirm that the introduction of amine, atomically-dispersed Cu II or heteroatomic sulphur sites into the pores enhance the capture of SO 2 at low concentrations. The captured SO 2 can be converted quantitatively to a pharmaceutical intermediate, aryl N-aminosulfonamide, thus converting waste to chemical values. In situ X-ray diffraction, infrared micro-spectroscopy and inelastic neutron scattering enable the visualisation of the binding domains of adsorbed SO 2 molecules and host–guest binding dynamics in these materials at the atomic level. Refinement of the pore environment plays a critical role in designing efficient sorbent materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Catalytically Active Site Mapping Realized through Energy Transfer Modeling

Thompson, William J.↗

DOE OSTI2025

Sequential Infiltration Synthesis of Cadmium Sulfide Discrete Atom Clusters

Exposure of soft material templates to alternating volatile chemical precursors can produce inorganic deposition within the permeable template (e.g. a polymer thin film) in a process akin to atomic layer deposition (ALD). While such sequential infiltration synthesis (SIS) processes have now been demonstrated for many metal oxides, we report an SIS process for a transition metal sulfide – CdS. Gas phase dimethyl cadmium and hydrogen sulfide precursors infiltrated into poly(4-vinylpyridine) thin films result in the 3D-nucleation of clusters consistent with a cubane-type Cd 4 S 4 core that are variably terminated with methyl, thiol and hydroxy capping ligands. First principles models and simulation of few-atom Cd-based clusters are consistent with electronic and vibrational spectroscopy and grazing-incidence total X-ray scattering measurements of 3D-cluster-arrays synthesized at 80 °C. The direct synthesis of few-atom transition metal sulfide clusters within polymer thin films will provide a versatile new route to precision architectures for light-absorbing materials including solar energy harvesting and conversion applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗