Search NASA⌕ Search

SEARCH · Search NASA

Results for “time scale separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Absolute Timing of the Crab Pulsar with RXTE

We have monitored the phase of the main X-ray pulse of the Crab pulsar with the Rossi X-ray Timing Explorer (RXTE) for almost eight years, since the start of the mission in January 1996. The absolute time of RXTE's clock is sufficiently accurate to allow this phase to be compared directly with the radio profile. Our monitoring observations of the pulsar took place bi-weekly (during the periods when it was at least 30 degrees from the Sun) and we correlated the data with radio timing ephemerides derived from observations made at Jodrell Bank. We have determined the phase of the X-ray main pulse for each observation with a typical error in the individual data points of 50 microseconds. The total ensemble is consistent with a phase that is constant over the monitoring period, with the X-ray pulse leading the radio pulse by 0.01025 plus or minus 0.00120 period in phase, or 344 plus or minus 40 microseconds in time. The error estimate is dominated by a systematic error of 40 microseconds, most likely constant, arising from uncertainties in the instrumental calibration of the radio data. The statistical error is 0.00015 period, or 5 microseconds. The separation of the main pulse and interpulse appears to be unchanging at time scales of a year or less, with an average value of 0.4001 plus or minus 0.0002 period. There is no apparent variation in these values with energy over the 2-30 keV range. The lag between the radio and X-ray pulses ma be constant in phase (i.e., rotational in nature) or constant in time (i.e., due to a pathlength difference). We are not (yet) able to distinguish between these two interpretations.

Rots, Arnold H.↗

Benefits Assessment for Single-Airport Tactical Runway Configuration Management Tool (TRCM)

The System-Oriented Runway Management (SORM) concept was developed as part of the Airspace Systems Program (ASP) Concepts and Technology Development (CTD) Project, and is composed of two basic capabilities: Runway Configuration Management (RCM), and Combined Arrival/Departure Runway Scheduling (CADRS). RCM is the process of designating active runways, monitoring the active runway configuration for suitability given existing factors, and predicting future configuration changes; CADRS is the process of distributing arrivals and departures across active runways based on local airport and National Airspace System (NAS) goals. The central component in the SORM concept is a tool for taking into account all the various factors and producing a recommendation for what would be the optimal runway configuration, runway use strategy, and aircraft sequence, considering as many of the relevant factors required in making this type of decision, and user preferences, if feasible. Three separate tools were initially envisioned for this research area, corresponding to the time scale in which they would operate: Strategic RCM (SRCM), with a planning horizon on the order of several hours, Tactical RCM (TRCM), with a planning horizon on the order of 90 minutes, and CADRS, with a planning horizon on the order of 15-30 minutes[1]. Algorithm development was initiated in all three of these areas, but the most fully developed to date is the TRCM algorithm. Earlier studies took a high-level approach to benefits, estimating aggregate benefits across most of the major airports in the National Airspace Systems (NAS), for both RCM and CADRS [2]. Other studies estimated the benefit of RCM and CADRS using various methods of re-sequencing arrivals to reduce delays3,4, or better balancing of arrival fixes5,6. Additional studies looked at different methods for performing the optimization involved in selecting the best Runway Configuration Plan (RCP) to use7-10. Most of these previous studies were high-level or generic in nature (not focusing on specific airports), and benefits were aggregated for the entire NAS, with relatively low fidelity simulation of SORM functions and aircraft trajectories. For SORM research, a more detailed benefits assessment of RCM and CADRS for specific airports or metroplexes is needed.

Oseguera-Lohr, Rosa↗

Radiative tearing - Magnetic reconnection on a fast thermal-instability time scale

Two energy modification mechanisms which are known to occur in sheared magnetic fields are the tearing and thermal instabilities. These processes can be studied separately with formalisms incorporating just the effective driving mechanism of interest (finite resistivity for the tearing mode and unstable radiation for the thermal mode). A model which includes both effects, and a temperature-dependent resistivity, indicates that modified forms of these two instabilities may coexist for identical physical conditions. When they are isolated computationally, one can show that their limiting growth rates are approximately those of the uncoupled instabilities. The spatial structure and energy content of these two new hybrid processes are then individually examined and are found to differ considerably from those obtained from separate treatments of the driving mechanisms. The faster radiative instability, which has a hydromagnetically scaled growth rate like the condensation mode of the thermal instability, is shown to involve a substantial amount of magnetic field reconnection. This can be partially explained by a large temperature drop (or resistivity rise) at the X-point. The island width of the Coulomb-coupled radiative mode is 30 percent of that produced by a comparable level of the slower tearing instability. In addition, the perturbed magnetic energy in the radiative instability is 5 times that of the perturbed thermal energy, indicating an appreciable modification of the initial magnetic structure.

Steinolfson, R. S.↗

The instability of a horizontal magnetic field in an atmosphere stable against convection

The theoretical problem posed by the buoyant escape of a magnetic field from the interior of a stably stratified body bears directly on the question of the present existence of primordial magnetic fields in stars. This paper treats the onset of the Rayleigh-Taylor instability of the upper boundary of a uniform horizontal magnetic field in a stably stratified atmosphere. The calculations are carried out in the Boussinesq approximation and show the rapid growth of the initial infinitesimal perturbation of the boundary. This result is in contrast to the extremely slow buoyant rise of a separate flux tube in the same atmosphere. Thus for instance, at a depth of 1/3 of a solar radius beneath the surface of the sun, a field of 100 G develops ripples over a scale of 1000 km in a characteristic time of 50 years, whereas the characteristic rise time of the same field in separate flux tubes with the same dimensions is 10 billion years. Thus, the development of irregularities proceeds quickly, soon slowing, however, to a very slow pace when the amplitude of the irregularities becomes significant. Altogether, the calculations show the complexity of the question of the existence of remnant primordial magnetic fields in stellar interiors.

Parker, E. N.↗

HEAO 1 observations of high-energy X-rays from the Seyfert I galaxy Mkn 509

The results of observations of the Seyfert I galaxy Mkn 509 at high X-ray energies (14-140 keV) with the UCSD/MIT instrument aboard HEAO 1 are reported. The source is detected at energies above 40 keV, and the spectrum is consistent with an extrapolation of the power-law spectrum obtained at lower X-ray energies. Observations on four separate days in 1978 October indicate that the source is varying on a time scale of days.

Dil, S.↗

Coastal Land Change Due to Tectonic Processes and Implications for Relative Sea-Level Rise in the Samoan Islands

Of the major coastal land change mechanisms responsible for relative sea-level change, tectonic subsidence is generally quoted as ranging from < mm/yr to 1 cm/yr. However, we documented coseismic and ongoing post-earthquake surface displacements from continuous GPS and tide gauge/altimetry data that indicated rapid subsidence on two of the major Samoan Islands of 12 - 20 cm during and following the 8.1 2009 Tonga-Samoa earthquake. Earlier results and our modeling of GRACE-derived gravimetric data provided a preliminary forecast of future relative sea-level rise through rapid land subsidence [Han et al., 2019]. Of course these numerical forecasts of time-dependent deformation are only as good as our input observations and our assumed rheological models. As part of our current NASA Earth Surface and Interior study, we are obtaining a wider range of data to constrain and test alternate models of ongoing postseismic deformation across American Samoa and Upolu, Samoa: (1) times series of altimetry plus tide gauge data processed to complement the cGPS data available to provide high-temporal resolution, point measurements of uplift/subsidence, (2) InSAR derived observations of surface deformation across the highly vegetated Samoan Islands, (3) evaluating and using NASA satellite lidar data (ICESat-I & ICESat-II, GEDI) for fusion with multi-source topographic data sets and for estimating topographic change on the decadal time scale. We are evaluating and using these new observations to better understand and separate out local, island-wide, and multi-island subsidence patterns and to evaluate the high impact of rising sea-level in a tectonically active region.

Jeanne Sauber-Rosenberg↗

Investigation of the flow between a pair of circular cylinders in the flopping regime

The wakes of a pair of circular cylinders are grossly unsteady when the cylinders are separated in a direction normal to the approaching flow by less than one cylinder diameter. The wakes flop randomly between two asymmetric states. The time-scale for the flopping is several orders of magnitude longer than the timescale of vortex shedding, and also several orders of magnitude longer than the timescale for instability of the separating shear layers. When a splitter plate is positioned suitably on the centerline of the cylinders, the flopping can be stopped and the flow made to assume either of the asymmetric states, or a symmetric steady state. For a range of plate positions a new, periodic oscillation occurs. Acoustic excitation can also destroy the flopping mean flow, replacing it by a symmetric flow.

Kim, H. J.↗

Challenges in Measuring External Currents Driven by the Solar Wind-Magnetosphere Interaction

In studying the Earth's geomagnetism, it has always been a challenge to separate magnetic fields from external currents originating from the ionosphere and magnetosphere. While the internal magnetic field changes very slowly in time scales of years and more, the ionospheric and magnetospheric current systems driven by the solar wind -magnetosphere interaction are very dynamic. They are intimately controlled by the ionospheric electrodynamics and ionospheremagnetosphere coupling. Single spacecraft observations are not able to separate their spatial and temporal variations, and thus to accurately describe their configurations. To characterize and understand the external currents, satellite observations require both good spatial and temporal resolutions. This paper reviews our observations of the external currents from two recent LEO satellite missions: Space Technology 5 (ST-5), NASA's first three-satellite constellation mission in LEO polar orbit, and Communications/Navigation Outage Forecasting System (C/NOFS), an equatorial satellite developed by US Air Force Research Laboratory. We present recommendations for future geomagnetism missions based on these observations.

WIND-MAGNETOSPHERE↗

Aerospace plane guidance using time-scale decomposition - A geometric approach

A method is proposed for developing the necessary guidance logic to steer single-stage vehicles into orbit. The minimum-fuel ascent problem is first considered to analyze the effects of dynamic pressure, acceleration, and heating constraints on guidance systems to thereby develop the guidance logic. The optimal solution consists of behavior with two time scales, and the control law is used to develop near-optimal guidance. The solution uses the slow manifold to delineate the control for minimum-fuel reduced-order trajectory and a separate control for tracking the optimal reduced-order trajectory. A family of fast manifolds is then employed to resolve the tracking problem via the feedback linearization methodology from nonlinear geometric control theory. The two-time-scale decomposition is found to produce a near-optimal ascent by tracking the applicable state-constraint boundary, as well as to simplify the control-design task.

Van Buren, Mark A.↗

Cloud Scaling Properties and Cloud Parameterization

Cloud liquid and cloud traction variability is studied as a function of horizontal scale in the ECMWF forecast model during several 10-day runs at the highest available model resolution, recently refined from approximately 60 km (T213) down to approximately 20 km (T639). At higher resolutions, model plane-parallel albedo biases are reduced, so that models may be tuned to have larger, more realistic, cloud liquid water amounts, However, the distribution of cloud liquid assumed -within- each gridbox, for radiative and thermodynamic computations, depends on ad hoc assumptions that are not necessarily consistent with observed scaling properties, or with scaling properties produced by the model at larger scales. To study the larger-scale cloud properties, ten locations on the Earth are chosen to coincide with locations having considerable surface data available for validation, and representing a variety of climatic regimes, scaling exponents are determined from a range or scales down to model resolution, and are re-computed every three hours, separately for low, medium and high clouds, as well as column-integrated cloudiness. Cloud variability fluctuates in time, due to diurnal, synoptic and other' processes, but scaling exponents are found to be relatively stable. various approaches are considered for applying computed cloud scaling to subgrid cloud distributions used for radiation, beyond simple random or maximal overlap now in common use. Considerably more work is needed to compare model cloud scaling with observations. This will be aided by increased availability of high-resolution surface, aircraft and satellite data, and by the increasing resolution of global models,

Cahalan, R. F.↗

3D computational analyses for SSME internal flows

Two qualities of the turbulent flow of hot gases in liquid fueled rocket engines that affect the selection and performance of turbulence models used in computational fluid analyses of the flow are curvature of the flow passages and rotation of the flow. Three configurations which represent these conditions and for which experimental data are available are subjected to three dimensional computational analyses using both the standard k - epsilon and a multiple-time-scale turbulence models. It is found that the multiple-time-scale model is better able to predict overall flow features, especially where regions of separated flow are present.

Chen, C. P.↗

Sensing propagation events and fade statistics at C-band for two over-water, line-of-sight propagation paths over a one year period

We examine signal fading statistics over a year period corresponding to two over-water, line-of-site, propagation links in the mid-Atlantic coast of the US. These links are comprised of a transmitter on a tower at Parramore Island, VA operating at 4.7 GHz sending simultaneous cw signals to two receiver systems located on a lighthouse and a lookout tower on Assateague Beach, VA at distances of 44 and 39 km, respectively. The receiving sites are separated by approximately 5 km. Cumulative fade distributions corresponding to yearly, monthly, and diurnal time scales were derived. Fade duration statistics correspond to sustained attenuation events were also derived. These events, which were arbitrarily defined as having fades relative to free space powers in excess of 20 dB for durations of two hours or more, are believed to be generally due to subrefraction. Analysis of synoptic weather conditions and nearby rawindsonde data during two sustained deep fading periods showed atmospheric conditions consistent with extreme subrefraction, where the refractivity-height profile had a positive lapse rate. The efficacy of employing the links as indicators of real time conditions of atmospheric propagation was also demonstrated by a telephone call-up procedure which enabled displays of time series of the fading at remote locations to be generated.

Goldhirsh, Julius↗

Reduction in Computational Cost of Progressive Failure Analysis of Composite Structures

Designing aircraft structures requires efficient modeling approaches to iterate on multiple structural configurations to achieve an optimal design. Typically, damage tolerance is not considered at the design stage because of the high computational cost in its implementation within a finite element modeling approach. Therefore, analytical or empirical approaches are often used to size critical damage-tolerant structures once an optimal design is determined. In this study, the Progressive Release eXplicit Virtual Crack-Closure Technique (PRX-VCCT) is assessed for its capability to cost-effectively evaluate skin stringer separation of a blade-stiffened panel that is subjected to seven point bend loads. An initial verification study was performed to evaluate PRX VCCT to accurately simulate skin-stringer separation with respect to existing cohesive element approaches. Furthermore, the influence of element size, ranging from 0.10 in. to 0.40 in., on the total computational time using the PRX-VCCT is investigated. The results indicate that the PRX-VCCT can be used to accurately simulate skin stringer separation using large element lengths (0.40 in.). Additionally, a significant reduction in the computational time to simulate skin stringer separation is observed using the PRX-VCCT. Large-scale progressive damage analysis using PRX-VCCT can be implemented early in the design cycle of composite structures without requiring a global-to-local modeling approach.

Composites↗

A Numerical Study of Low-Reynolds-Number Separation Bubbles

The present study uses two dimensional numerical simulations to study unsteady low-Reynolds-number separation bubbles. The numerical study is in two parts: (1) a two dimensional time-accurate Navier-Stokes solver is used to simulate flows over the APEX airfoil, and (2) a numerical procedure is developed for localized simulations of transitional separation bubbles. The 2-D computations of flow over the APEX airfoil show that the flow is unsteady with periodic vortex shedding. A linear stability analysis of the separated flow shows that the vortex shedding is caused due to the instability of the separated flow. For transonic flows over the APEX airfoil the vortex shedding is additionally influenced by the presence of shocks. The flowfield has two characteristic time scales, one corresponding to the vortex shedding and another corresponding to the movement of the shocks. The two dimensional (2-D) airfoil simulations also showed the presence of nonlinear effects in the separated region. To better understand the characteristics of separation bubbles a numerical procedure has been developed for localized separation bubble calculations. This procedure is used to perform computations for a flat plate separation bubble test case. The separation bubble is induced by specifying a velocity gradient in the freestream. The growth of disturbances in the separation bubble is analyzed by introducing disturbances upstream of the separation bubble.

Tatineni, Mahidhar↗

Stratospheric ozone and temperature responses to short-term solar ultraviolet variations - Reproducibility of low-latitude response measurements

Two independent 22-month time intervals of NIMBUS 7 solar backscattered UV (SBUV) ozone and stratospheric and mesospheric sounder (SAMS) temperature measurements for the upper stratosphere at low latitudes are analyzed to calculate mean responses to observed changes in solar ultraviolet spectral irradiance occurring on the time scale of the solar rotation period. Average cross-correlation functions of both SBUV ozone and SAMS temperature versus the solar 205 nm flux are in substantial agreement for these two intervals. Linear regression methods are applied to estimate response amplitudes or sensitivities. The derived sensitivities and phase lags relative to the 205 nm flux are also in approximate agreement for the two separate intervals although the temperature response measurements exhibit larger deviations. These results support the validity of previously reported measurements on the 27-day time scale, and impose firmer constraints on proposed theoretical models for the response of the stratosphere to solar UV forcing on both short and long time scales.

Hood, L. L.↗

Spatially and Temporally-Resolved Multi-Parameter Interferometric Rayleigh Scattering

A novel approach to simultaneously measure the translational temperature, bulk velocity, and density in gases by collecting, referencing, and analyzing nanosecond time-scale Rayleigh scattered light from molecules is described. A narrow-band pulsed laser source is used to probe two largely separated measurement locations, one of which is used for reference. The elastically scattered photons containing information from both measurement locations are collected at the same time and analyzed spectrally using a planar Fabry - Perot interferometer. A practical means of referencing the measurement of velocity using the laser frequency, and the density and temperature using the information from the reference measurement location maintained at constant properties is described. To demonstrate the technique single-shot spectra of elastic scattered light are obtained in a near zero velocity H2-air Hencken burner flame and simultaneously in an N2-filled gas cell. A simplified Gaussian distribution model to the scattered light spectra is used to obtain the flame properties. Corrections to this model are applied at lower gas temperatures when the simplified Gaussian approximation is no longer suitable. The near-zero measured velocity as a function of the measured flame temperature, and a comparison of the measured flame density and temperature with the perfect gas law are presented.

Bivolaru, Daniel↗

Spatially-and Temporally-Resolved Multi-Parameter Interferometric Rayleigh Scattering System and Method

A system that simultaneously measures the translational temperature, bulk velocity, and density in gases by collecting, referencing, and analyzing nanosecond time-scale Rayleigh scattered light from molecules is described. A narrow-band pulsed laser source is used to probe two largely separated measurement locations, one of which is used for reference. The elastically scattered photons containing information from both measurement locations are collected at the same time and analyzed spectrally using a planar Fabry-Perot interferometer. A practical means of referencing the measurement of velocity using the laser frequency, and the density and temperature using the information from the reference measurement location maintained at constant properties is provided.

Bivolaru, Daniel↗

Surface-pressure fluctuations associated with aerodynamic noise on the space shuttle launch configuration at transonic and supersonic speeds

A 0.035-scale space shuttle model was recently tested at Ames Research Center to define the fluctuating surface pressures during the launch phase of the full-scale vehicle. A 120-channel data acquisition and reduction system was employed to obtain fluctuating pressure measurements from 240 pressure transducers in two separate data passes. Time histories from all transducers were recorded on four 32-track FM tape recorders. A minicomputer was used to compute and record on-line rms values, the fluctuating pressure coefficient, and full-scale dB levels. The minicomputer also partially controlled the test conditions and fully controlled all data acquisition sequences, thus greatly improving the efficiency of test operations. This paper presents details of the tests and illustrates the fluctuating pressures that will occur on the space shuttle and launch vehicle.

Hanly, R. D.↗