SEARCH · Search NASA

Results for “total volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1990

Miniaturized, 9-12 micron heterodyne spectrometer with space qualifiable design features

A demonstration-prototype CO2-laser heterodyne spectrometer operating at 9-12 microns and suitable for long-term space missions is described and illustrated with extensive diagrams, drawings, photographs, and graphs of test performance data. The spectrometer has total volume 0.63 cu m, mass 30 kg, and power requirement 60-70 W, compatible with miniature-class Space Shuttle experiment payload specifications. It comprises three modules: (1) an optical front end with reflecting optics, a 2-GHz BW HgCdTe photomixer, and a 0-2-GHz 40-dB RF preamplifier; (2) a local oscillator with an RF-excited waveguide CO2 laser, a 75-percent-efficiency RF amplifier, a stepper-driven grating mode selector, and an etalon stabilized for over 30,000 h of use; and (3) an RF-filter-bank spectral-line receiver with a 25-MHz RF channel, 1.6-GHz IF spectral coverage, onboard instrument control, a serial link to the host computer, and highly integrated design.

Glenar, D. A.↗

NASA NTRS1992

Achieving and documenting closure in plant growth facilities

As NASA proceeds with its effort to develop a Controlled Ecological Life Support System (CELSS) that will provide life support to crews during long duration space missions, it must address the question of facility and system closure. The concept of closure as it pertains to CELSS and engineering specifications, construction problems and monitoring procedures used in the development and operation of a closed plant growth facility for the CELSS program are described. A plant growth facility is one of several modules required for a CELSS. A prototype of this module at Kennedy Space Center is the large (7m tall x 3.5m diameter) Biomass Production Chamber (BPC), the central facility of the CELSS Breadboard Project. The BPC is atmospherically sealed to a leak rate of approximately 5 percent of its total volume per 24 hours. This paper will discuss the requirements for atmospheric closure in the facility, present CO2 and trace gas data from initial tests of the BPC with and without plants, and describe how the chamber was sealed atmospherically. Implications that research conducted in this type of facility will have for the CELSS program are discussed.

Knott, W. M.↗

NASA NTRS1992

Magma reservoirs and neutral buoyancy zones on Venus - Implications for the formation and evolution of volcanic landforms

The production of magma reservoirs and neutral buoyancy zones (NBZs) on Venus and the implications of their development for the formation and evolution of volcanic landforms are examined. The high atmospheric pressure on Venus reduces volatile exsolution and generally serves to inhibit the formation of NBZs and shallow magma reservoirs. For a range of common terrestrial magma-volatile contents, magma ascending and erupting near or below mean planetary radius (MPR) should not stall at shallow magma reservoirs; such eruptions are characterized by relatively high total volumes and effusion rates. For the same range of volatile contents at 2 km above MPR, about half of the cases result in the direct ascent of magma to the surface and half in the production of neutral buoyancy zones. NBZs and shallow magma reservoirs begin to appear as gas content increases and are nominally shallower on Venus than on earth. For a fixed volatile content, NBZs become deeper with increasing elevation: over the range of elevations treated in this study (-1 km to +4.4 km) depths differ by a factor of 2-4. Factors that may account for the low height of volcanoes on Venus are discussed.

Head, James W.↗

NASA NTRS1992

Impactites from Popigai Crater

Impactites (tagamites and suevites) from Popigai impact crater, whose diameter is about 100 km, are distributed over an area of 5000 sq km. The continuous sheet of suevite overlies the allogenic polymict breccia and partly authogenic breccia, and may also be observed in lenses or irregular bodies. The thickness of suevites in the central part of the crater is more than 100 m. Suevites may be distinguished by content of vitroclasts, lithoclasts, and crystalloclasts, by their dimensions, and by type of cementation, which reflects the facial settings of ejection of crushed and molten material, its sedimentation and lithification. Tagamites (impact melt rocks) are distributed on the surface predominantly in the western sector of the crater. The most characteristic are thick sheetlike bodies overlying the allogenic breccia and occurring in suevites where minor irregular bodies are widespread. The maximal thickness of separate tagamite sheets is up to 600 m. Tagamites, whose matrix is crystallized to a different degree, include fragments of minerals and gneiss blocks, among them shocked and thermally metamorphosed ones. Tagamite sheets have a complex inner structure; separate horizontal zones distinguish in crystallinity and fragment saturation. Differentiation in the impact melt in situ was not observed. The average chemical compositions of tagamites and suevites are similar, and correspond to the composition of biotite-garnet gneisses of the basement. According to the content of supplied Ir, Ni, and other siderophiles, impact melt was contaminated by 5 percent cosmic matter of collided body, probably ordinary chondrite. The total volume of remaining products of chilled impact melt is about 1750 cu km. Half this amount is represented by tagamite bodies. Though impact melt was in general well homogenized, the trend analysis showed that the concentric zonation is distribution of SiO2, MgO, and Na2O and the bandlike distribution of FeO and Al2O3 content testifies to a certain inheritance and heterogeneity in country rock composition laterally and vertically in the melting zone.

Masaitis, V. L.↗

NASA NTRS1992

Basaltic impact melts in the Apollo collections: How many impacts and which events are recorded?

Many of the rocks in the Apollo collections from the lunar highlands are impact melt breccias of basaltic bulk composition. They are known by a variety of names including low-K Fra Mauro basalt, VHA basalt, and basaltic impact melts. These rocks have been studied to understand the compositional nature of the lunar crust, to decipher the processes of large body impact, and to comprehend the record of impact bombardment of the Moon. Study of terrestrial craters has led to a model for impact melt generation whereby target lithologies are totally melted during impact. The impact melt makes up a few percent of the total volume of crater material; superheated silicate liquids of the impact melt have extremely low viscosities and mix intimately. This mixing thoroughly homogenizes the melt chemically during the excavation of the crater. Colder, unmelted debris is overridden by the melt sheet as the crater cavity grows. Incorporation of these cold clasts rapidly chills the melt, with zones of greater and lesser amounts of clasts being primarily responsible for modestly differing thermal regimes. The net effect of this process is the production of a suite of rocks that have extreme chemical homogeneity, but wide petrographic diversity. Strict application of this model to the petrogenesis of basaltic impact melts from the Moon has some fairly significant consequences for how we interpret early lunar history. The consequences are briefly discussed.

Spudis, Paul D.↗

NASA NTRS1991

Mechanisms of voids formation during cooldown and freezing of lithium in SP-100 type systems

The mechanisms of void formation during the cooldown and freezing of lithium coolant within the primary loop of SP-100 type systems are investigated. These mechanisms are: (a) homogeneous nucleation, (b) heterogeneous nucleation, (c) normal segregation of helium gas dissolved in liquid lithium, and (d) shrinkage of lithium during freezing. To evaluate the void formation potential due to segregation, a numerical scheme that couples the freezing and mass diffusion processes in both the solid and liquid regions is developed. The results indicated that the formation of He bubbles is unlikely by either homogeneous or heterogeneous nucleation during the cooldown process. However, homogeneous nucleation of He bubbles following the segregation of dissolved He in liquid Lithium ahead of the solid-liquid interface is likely to occur. Results also show that total volume of He void is insignificant when compared to that of shrinkage voids.

Yang, Jae Y.↗

NASA NTRS1993

Numerical study of the transient flow in the driven tube and the nozzle section of a shock tunnel

The initial flow in a shock tunnel was examined numerically using computational fluid dynamics (CFD). A finite-volume total variation diminishing (TVD) scheme was used to calculate the transient flow in a shock tunnel. Both viscous and inviscid, chemically nonreacting flows were studied. The study consisted of two parts, the first dealt with the transient flow in the driven-tube/nozzle interface region (inviscid calculations). The effects of varying the geometry in this region was examined. The second part of the study examined the transient flow in the nozzle (viscous calculations). The results were compared to experimental data.

Tokarcik-Polsky, Susan↗

NASA NTRS1957

Minimum Wave Drag for Arbitrary Arrangements of Wings and Bodies

Studies of various arrangements of wings and bodies designed to provide favorable wave interference at supersonic speeds lead to the problem of determining the minimum possible valve of the wave resistance obtainable by any disposition of the elements of an aircraft within a definitely prescribed region. Under the assumptions that the total lift and the total volume of the aircraft are given, conditions that must be satisfied if the drag is to be a minimum are found. The report concludes with a discussion of recent developments of the theory which lead to an improved understanding of the drag associated with the production of lift.

Jones, Robert T↗

NASA NTRS1993

Hydrological consequences of ponded water on Mars

Although geomorphological evidence for ancient highly active water cycling has long been obvious for Mars, geochemical analyses have only recently been found to be consistent with this fact. One approach to understanding the geomorphological evidence has been to estimate the total volume of the Martian hydrosphere. I will discuss an approach focused on the history of changing water processes on the planet, and on the understanding of those processes in a global sense.

Baker, V. R.↗

NASA NTRS1994

Minuteman 2 launched small satellite

The goal of LEOSat Industries' Spring 1994 project was to design a small satellite that has a strong technology demonstration or scientific justification and incorporates a high level of student involvement. The satellite is to be launched into low earth orbit by the converted Minuteman 2 satellite launcher designed by Minotaur Designs, Inc. in 1993. The launch vehicle shroud was modified to a height of 90 inches, a diameter of 48 inches at the bottom and 35 inches at the top for a total volume of 85 cubic feet. The maximum allowable mass of the payload is about 1100 lb., depending on the launch site, orbit altitude, and inclination. The satellite designed by LEOSat Industries is TerraSat, a remote-sensing satellite that will provide information for use in space-based earth studies. It will consist of infrared and ultraviolet/visible sensors similar to the SDI-developed sensors being tested on Clementine. The sensors will be mounted on the Defense Systems, Inc. Standard Satellite-1 spacecraft bus. LEOSat has planned for two satellites orbiting the Earth with trajectories similar to that of LANDSAT 5. The semi-major axis is 7080 kilometers, the eccentricity is 0, and the inclination is 98.2 degrees. The estimated mass of TerraSat is 145 kilograms and the estimated volume is 1.8 cubic meters. The estimated cost of TerraSat is $13.7 million. The projected length of time from assembly of the sensors to launch of the spacecraft is 13 months.

Chan, Sunny↗

NASA NTRS1994

Dust deposits on Mars: The 'parna' analog

Parna is an Autralian aboriginal word meaning 'sandy dust'. It has been applied to deposits of clay, silt, and sand which were initially transported by the wind as aggregates, or pellets, of sand size. Parna is distinguished by its silt and clay content, which in some cases exceeds 85% of the total volume of the deposit. Much of the fine-grained playa silt and clay is incorporated into the parna as sand-sized aggregates, which greatly facilitate their transportation and reworking by the wind. Rain following aggregate emplacement can cause their disintegration, rendering the parna immobile by the wind, yet some pellets can survive several wetting/drying episodes. Parna deposits on Earth occur both as dune forms and as sheet deposits which mantle older terrains. In both cases the deposits are typically derived from lacustrine (lake) beds, such as playas. There is substantial evidence to suggest that bodies of water existed on Mars in the past. Thus, the potential is high for lacustrine deposits and the formation of parna on Mars. Although no parna dunes have been identified, it is suggested that the deposits derived from White Rock (-8 deg, 335 deg W), near Mamers Valles (34 deg, 343 deg W), and elsewhere on Mars may represent sheet parna. Data obtained from Mars-94/96 missions and potential landed spacecraft may provide additional evidence for the existence of parna on Mars.

Greeley, Ronald↗

NASA NTRS1995

Magnetic reconnection in the presence of sheared flow and density asymmetry: Applications to the Earth's magnetopause

Classical models of magnetic reconnection consist of a small diffusion region bounded by two symmetric slow shocks, across which the plasma is accelerated. Asymmetries often present in space plasmas are sheared plasma flow and dissimilar plasma densities on the two sides of current sheets. In this paper, we investigate magnetic reconnection in the presence of a shear flow and an asymmetric density across the current sheet using two-dimensional magnetohydrodynamic (MHD) simulations. The results demonstrate that magnetic reconnection can occur only for a plasma flow velocity (in the frame of the X line) which is below the Alfven speed in each inflow region. This limits the velocity of the X line to a certain range for a given flow shear and provides an upper limit to the total velocity shear at which reconnection ceases to operate. Depending on the direction of the flow in the adjacent inflow region, the effects from the sheared flow and from the density asymmetry will compete with or enhance each other in respect to the magnitude and location of the currents which bound the outflow regions. The results are applied to the dayside and flank regions of the magnetosphere. For the dayside region where the magnetosheath flow is slow, the magnetic field transition region is thin and the accelerated flow is earthward of the sharp current layer (magnetopause). At the flanks tailward of the X line, shear flow and density asymmetry effects compete making the magnetic field transition layer broad with the high-speed flow contained within the transition region which explains corresponding observations. At the flanks sunward of the X line, shear flow and density asymmetry effects enhance each other and lead to a strong current sheet on the magnetosheath side of the accelerated flow. The total volume affected by magnetic reconnection is much larger than the steady state region. A large bulge region precedes the steady state region. Qualitatively, the bulge and the steady state region have similar signatures and both can explain observations. We provide criteria in order to distinguish between the bulge and the steady state region in observations.

La Belle-Hamer, A. L.↗

NASA NTRS1996

NASDA's earth observation satellite data archive policy for the earth observation data and information system (EOIS)

NASDA's new Advanced Earth Observing Satellite (ADEOS) is scheduled for launch in August, 1996. ADEOS carries 8 sensors to observe earth environmental phenomena and sends their data to NASDA, NASA, and other foreign ground stations around the world. The downlink data bit rate for ADEOS is 126 MB/s and the total volume of data is about 100 GB per day. To archive and manage such a large quantity of data with high reliability and easy accessibility it was necessary to develop a new mass storage system with a catalogue information database using advanced database management technology. The data will be archived and maintained in the Master Data Storage Subsystem (MDSS) which is one subsystem in NASDA's new Earth Observation data and Information System (EOIS). The MDSS is based on a SONY ID1 digital tape robotics system. This paper provides an overview of the EOIS system, with a focus on the Master Data Storage Subsystem and the NASDA Earth Observation Center (EOC) archive policy for earth observation satellite data.

Sobue, Shin-ichi↗

NASA NTRS1995

Evidence for Regional Basin Formation in Early Post-Tessera Venus History: Geology of the Lavinia Planitia Area (V55)

On Venus, global topography shows the presence of highs and lows including regional highly deformed plateaus (tesserae), broad rifted volcanic rises, linear lows flanking uplands, and more equidimensional lowlands (e.g. Lavinia and Atalanta planitiae) Each of these terrain types on Venus has relatively distinctive characteristics, but origins are uncertain in terms of mode of formation, time of formation, and potential evolutionary links. There is a high level of uncertainty about the formation and evolution of lowlands on Venus. We have undertaken the mapping of a specific lowlands region of Venus to address several of these major questions. Using geologic mapping we have tried to establish: What is the sequence of events in the formation and evolution of large-scale equidimensional basins on Venus? When do the compressional features typical of basin interiors occur? What is the total volume of lava that occurs in the basins and is this similar to other non-basin areas? How much subsidence and downwarping has occurred after the last major plains units? WE have undertaken an analysis of the geology of the V55 Lavinia Planitia quadrangle in order to address many of these issues and we report on the results here.

Head, J. W.↗

NASA NTRS1999

Performance and Application of Parallel OVERFLOW Codes on Distributed and Shared Memory Platforms

The presentation discusses recent studies on the performance of the two parallel versions of the aerodynamics CFD code, OVERFLOW_MPI and _MLP. Developed at NASA Ames, the serial version, OVERFLOW, is a multidimensional Navier-Stokes flow solver based on overset (Chimera) grid technology. The code has recently been parallelized in two ways. One is based on the explicit message-passing interface (MPI) across processors and uses the _MPI communication package. This approach is primarily suited for distributed memory systems and workstation clusters. The second, termed the multi-level parallel (MLP) method, is simple and uses shared memory for all communications. The _MLP code is suitable on distributed-shared memory systems. For both methods, the message passing takes place across the processors or processes at the advancement of each time step. This procedure is, in effect, the Chimera boundary conditions update, which is done in an explicit "Jacobi" style. In contrast, the update in the serial code is done in more of the "Gauss-Sidel" fashion. The programming efforts for the _MPI code is more complicated than for the _MLP code; the former requires modification of the outer and some inner shells of the serial code, whereas the latter focuses only on the outer shell of the code. The _MPI version offers a great deal of flexibility in distributing grid zones across a specified number of processors in order to achieve load balancing. The approach is capable of partitioning zones across multiple processors or sending each zone and/or cluster of several zones into a single processor. The message passing across the processors consists of Chimera boundary and/or an overlap of "halo" boundary points for each partitioned zone. The MLP version is a new coarse-grain parallel concept at the zonal and intra-zonal levels. A grouping strategy is used to distribute zones into several groups forming sub-processes which will run in parallel. The total volume of grid points in each group are approximately balanced. A proper number of threads are initially allocated to each group, and in subsequent iterations during the run-time, the number of threads are adjusted to achieve load balancing across the processes. Each process exploits the multitasking directives already established in Overflow.

Djomehri, M. Jahed↗

NASA NTRS2000

Latest Results from the Mars Orbiter Laser Altimeter (MOLA)

The first MOLA data were acquired in Sept. 1997 shortly after the arrival of Mars Global Surveyor (MGS) at Mars and before the start of aerobraking. Subsequently, data were obtained during several months in the spring and summer of 1998. All these data were obtained over the northern hemisphere. At the beginning of March 1999 the mapping phase of the MGS mission began in the designed 400 km near circular, near polar orbit and MOLA began collecting continuous global data. By the end of 1999 MOLA had acquired over 250 million altimeter measurements of the radius of the planet at accuracies of the order of a few meters radially and about 100 meters horizontally. These observations revealed the detailed structure of the Martian surface, the form of the polar caps, as well as the shape of the planet. The early results provided a unique view of the north polar cap and subsequently of the south polar cap from which an estimate of the total volume of present-day surface water ice of 3.2 to 4.7 million cubic km was obtained. To obtain full coverage of the polar caps it was necessary for MOLA to be pointed off nadir approximately 20 degrees and on several occasions MGS has performed a roll maneuver to make these observations. It is hoped that these off-nadir observations of the central region of the cap (MGS only reaches to latitudes plus or minus 86.5) will assist in the detection of the seasonal deposition of CO2 since it is believed that these high latitudes regions may be the accumulation zone.

Smith, David E.↗

NASA NTRS1998

Lessons Learned During Implementation and Early Operations of the DS1 Beacon Monitor Experiment

A new approach to mission operations will be flight validated on NASA's New Millennium Program Deep Space One (DS1) mission which launched in October 1998. The Beacon Monitor Operations Technology is aimed at decreasing the total volume of downlinked engineering telemetry by reducing the frequency of downlink and the volume of data received per pass. Cost savings are achieved by reducing the amount of routine telemetry processing and analysis performed by ground staff. The technology is required for upcoming NASA missions to Pluto, Europa, and possibly some other missions. With beacon monitoring, the spacecraft will assess its own health and will transmit one of four beacon messages each representing a unique frequency tone to inform the ground how urgent it is to track the spacecraft for telemetry. If all conditions are nominal, the tone provides periodic assurance to ground personnel that the mission is proceeding as planned without having to receive and analyze downlinked telemetry. If there is a problem, the tone will indicate that tracking is required and the resulting telemetry will contain a concise summary of what has occurred since the last telemetry pass. The primary components of the technology are a tone monitoring technology, AI-based software for onboard engineering data summarization, and a ground response system. In addition, there is a ground visualization system for telemetry summaries. This paper includes a description of the Beacon monitor concept, the trade-offs with adapting that concept as a technology experiment, the current state of the resulting implementation on DS1, and our lessons learned during the initial checkout phase of the mission. Applicability to future missions is also included.

Sherwood, Rob↗

NASA NTRS1999

Chemical Analysis and Water Recovery Testing of Shuttle-Mir Humidity Condensate

Humidity condensate collected and processed in-flight is an important component of a space station drinking water supply. Water recovery systems in general are designed to handle finite concentrations of specific chemical components. Previous analyses of condensate derived from spacecraft and ground sources showed considerable variation in composition. Consequently, an investigation was conducted to collect condensate on the Shuttle while the vehicle was docked to Mir, and return the condensate to Earth for testing. This scenario emulates an early ISS configuration during a Shuttle docking, because the atmospheres intermix during docking and the condensate composition should reflect that. During the STS-89 and STS-91 flights, a total volume of 50 liters of condensate was collected and returned. Inorganic and organic chemical analyses were performed on aliquots of the fluid. Tests using the actual condensate were then conducted with scaled-down elements of the Russian condensate recovery system to determine the quality of water produced. The composition and test results are described, and implications for ISS are discussed.

Mudgett, Paul D.↗