Search NASA⌕ Search

SEARCH · Search NASA

Results for “transit method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Lack of superconductivity in the phase diagram of single-crystalline Eu ( F e 1 - x C o x ) 2 A s 2 grown by transition metal arsenide flux

Here, the interplay of magnetism and superconductivity (SC) has been a focus of interest in condensed matter physics for decades. EuFe 2 As 2 has been identified as a potential platform to investigate interactions between structural, magnetic, and electronic effects as well as the coexistence of magnetism and SC with similar transition temperatures. However, there are obvious inconsistencies in the reported phase diagrams of Eu(Fe 1–x Co x ) 2 As 2 crystals grown by different methods. For transition metal arsenide (TMA)-flux-grown crystals, even the existence of SC is uncertain. Here we reexamine the phase diagram of single-crystalline Eu(Fe 1–x Co x ) 2 As 2 grown by TMA flux. We found that the lattice parameter c shrinks linearly with Co doping, almost twice as fast as that of the tin-flux-grown crystals. With Co doping, the spin-density-wave (SDW) order of the Fe sublattice is quickly suppressed, being detected only up to x=0.08. The magnetic ordering temperature of the Eu 2+ sublattice ( T Eu ) shows a systematic evolution with Co doping, first going down and reaching a minimum at x=0.08, then increasing continuously up to x=0.24. Over the whole composition range investigated, no signature of SC is observed above 1.8 K.

36 MATERIALS SCIENCE↗

On Achieving High Accuracy in Quantum Chemical Calculations of 3 d Transition Metal-Containing Systems: A Comparison of Auxiliary-Field Quantum Monte Carlo with Coupled Cluster, Density Functional Theory, and Experiment for Diatomic Molecules

According to the article, the bond dissociation energies of a set of 44 3d transition metal-containing diatomics are computed with phaseless auxiliary-field quantum Monte Carlo (ph-AFQMC) utilizing a correlated sampling technique. We investigate molecules with H, N, O, F, Cl, and S ligands, including those in the 3dMLBE20 database first compiled by Truhlar and co-workers with calculated and experimental values that have since been revised by various groups. In order to make a direct comparison of the accuracy of our ph-AFQMC calculations with previously published results from 10 DFT functionals, CCSD(T), and icMR-CCSD(T), we establish an objective selection protocol which utilizes the most recent experimental results except for a few cases with well-specified discrepancies. With the remaining set of 41 molecules, we find that ph-AFQMC gives robust agreement with experiment superior to that of all other methods, with a mean absolute error (MAE) of 1.4(4) kcal/mol and maximum error of 3(3) kcal/mol (parentheses account for reported experimental uncertainties and the statistical errors of our ph-AFQMC calculations). In comparison, CCSD(T) and B97, the best performing DFT functional considered here, have MAEs of 2.8 and 3.7 kcal/mol, respectively, and maximum errors in excess of 17 kcal/mol (for the CoS diatomic). While a larger and more diverse data set would be required to demonstrate that ph-AFQMC is truly a benchmark method for transition metal systems, our results indicate that the method has tremendous potential, exhibiting unprecedented consistency and accuracy compared to other approximate quantum chemical approaches.

Chemistry↗

Defense mechanism for non-volatile memory based main memory

A method includes receiving a write request for writing incoming data to a target memory line and, in response to the write request, comparing the incoming data with existing data in the target memory line to determine a number of a first type of state transition. The method further includes, in response to determining that the number of the first type of state transition for the write request exceeds a threshold, prior to writing the incoming data to the target memory line, storing adjacent data from each of a set of memory lines adjacent to the target memory line, and after writing the incoming data to the target memory line, writing the stored data to the set of adjacent memory lines.

SeyedzadehDelcheh, SeyedMohammad↗

Exascale granular microstructure reconstruction in 3D volumes of arbitrary geometries with generative learning

Reconstructing 3D granular microstructures within volumes of arbitrary geometries from limited 2D image data is crucial for predicting the material properties, as well as performances of structural components accounting for material microstructural effects. We present a novel generative learning framework that enables exascale reconstruction of granular microstructures within complex 3D geometric volumes. Building upon existing transfer learning techniques using pre-trained convolutional neural networks (CNN), we introduce several key innovations to overcome the difficulties inherent in arbitrary geometries. Our framework incorporates periodic boundary conditions using circular padding techniques, ensuring continuity and representativeness of the reconstructed microstructures. We also introduce a novel seamless transition reconstruction (STR) method that creates statistically equivalent transition zones to integrate multiple pre-existing 3D microstructure volumes. Based on STR, we propose a cost-effective strategy for reconstructing microstructures within complex geometric volumes, minimizing computational waste. Validation through numerical experiments using kinetic Monte Carlo simulations demonstrates accurate reproduction of grain statistics, including grain size distributions and morphology. A case study involving the reconstruction of a 4-blade propeller microstructure illustrates the method’s capability to efficiently handle complex geometries. In conclusion, the proposed framework significantly reduces computational demands while maintaining high reconstruction quality, paving the way for scalable microstructure reconstruction in materials design and analysis.

36 MATERIALS SCIENCE↗

Population transfer HMQC for half-integer quadrupolar nuclei

This work presents a detailed analysis of a recently proposed nuclear magnetic resonance method [Wang et al., Chem. Commun. 49(59), 6653-6655 (2013)] for accelerating heteronuclear coherence transfers involving half-integer spin quadrupolar nuclei by manipulating their satellite transitions. This method, called Population Transfer Heteronuclear Multiple Quantum Correlation (PT-HMQC), is investigated in details by combining theoretical analyses, numerical simulations, and experimental investigations. We find that compared to instant inversion or instant saturation, continuous saturation is the most practical strategy to accelerate coherence transfers on half-integer quadrupolar nuclei. We further demonstrate that this strategy is efficient to enhance the sensitivity of J-mediated heteronuclear correlation experiments between two half-integer quadrupolar isotopes (e.g., {sup 27}Al-{sup 17}O). In this case, the build-up is strongly affected by relaxation for small T{sub 2}′ and J coupling values, and shortening the mixing time makes a huge signal enhancement. Moreover, this concept of population transfer can also be applied to dipolar-mediated HMQC experiments. Indeed, on the AlPO{sub 4}-14 sample, one still observes experimentally a 2-fold shortening of the optimum mixing time albeit with no significant signal gain in the {sup 31}P-({sup 27}Al) experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PREDICTION OF CHARACTERISTIC LENGTH AND FRACTURE TOUGHNESS IN DUCTILE-BRITTLE TRANSITION

Finite element method was used to analyze the three-point bend experimental data of A533B-1 pressure vessel steel obtained by Sherry, Lidbury, and Beardsmore [1] from -160 to -45 C within the ductile-brittle transition regime. As many researchers have shown, the failure stress ({sigma}{sub f}) of the material could be approximated as a constant. The characteristic length, or the critical distance (r{sub c}) from the crack tip, at which {sigma}{sub f} is reached, is shown to be temperature dependent based on the crack tip stress field calculated by the finite element method. With the J-A{sub 2} two-parameter constraint theory in fracture mechanics, the fracture toughness (J{sub C} or K{sub JC}) can be expressed as a function of the constraint level (A{sub 2}) and the critical distance r{sub c}. This relationship is used to predict the fracture toughness of A533B-1 in the ductile-brittle transition regime with a constant {sigma}{sub f} and a set of temperature-dependent r{sub c}. It can be shown that the prediction agrees well with the test data for wide range of constraint levels from shallow cracks (a/W= 0.075) to deep cracks (a/W= 0.5), where a is the crack length and W is the specimen width.

36 MATERIALS SCIENCE↗

FOAM: NOVEL DELIVERY TECHNOLOGY FOR REMEDIATION OF VADOSE ZONE ENVIRONMENTS

Deep vadose zone environments can be a primary source and pathway for contaminant migration to groundwater. These environments present unique characterization and remediation challenges that necessitate scrutiny and research. The thickness, depth, and intricacies of the deep vadose zone, combined with a lack of understanding of the key subsurface processes (e.g., biogeochemical and hydrologic) affecting contaminant migration, make it difficult to create validated conceptual and predictive models of subsurface flow dynamics and contaminant behavior across multiple scales. These factors also make it difficult to design and deploy sustainable remedial approaches and monitor long-term contaminant behavior after remedial actions. Functionally, the methods for addressing contamination must remove and/or reduce transport of contaminants. This problem is particularly challenging in the arid western United States where the vadose zone is hundreds of feet thick, rendering transitional excavation methods exceedingly costly and ineffective. Delivery of remedial amendments is one of the most challenging and critical aspects for all remedy-based approaches. The conventional approach for delivery is through injection of aqueous remedial solutions. However, heterogeneous deep vadose zone environments present hydrologic and geochemical challenges which limit the effectiveness. Because the flow of solution infiltration is dominantly controlled by gravity and suction, injected liquid preferentially percolates through highly permeable pathways, by-passing low-permeability zones which frequently contain the majority of contamination. Moreover, the wetting front can readily mobilize and enhance contaminant transport to the underlying aquifer prior to stabilization. Development of innovative, in-situ technologies may be the only way to meet remedial action objectives and long-term stewardship goals. Surfactants can be used to lower the liquid surface tension and create stabile foams, which readily penetrate low permeability zones. Although surfactant foams have been utilized for subsurface mobilization efforts in the oil and gas industry, so far, the concept of using foams as a delivery mechanism for transporting remedial amendments into deep vadose zone environments to stabilize metal and long-lived radionuclide contaminants has not been explored. Foam flow can be directed by pressure gradients, rather than being dominated by gravity; and, foam delivery mechanisms limit the volume of water (< 5% vol.) required for remedy delivery and emplacement, thus mitigating contaminant mobilization. We will present the results of a numerical modeling and integrated laboratory- / intermediate-scale investigation to simulate, develop, demonstrate, and monitor (i.e. advanced geophysical techniques and advanced predictive biomarkers) foam-based delivery of remedial amendments to remediate metals and radionuclides in vadose zone environments.

Environmental Molecular Sciences Laboratory↗

Advanced Remedial Methods for Metals and Radionuclides in Vadose Zone Environments

Functionally, the methods for addressing contamination must remove and/or reduce transport or toxicity of contaminants. This problem is particularly challenging in arid environments where the vadose zone can be up to hundreds of feet thick, rendering transitional excavation methods exceedingly costly and ineffective. Delivery of remedial amendments is one of the most challenging and critical aspects for all remedy-based approaches. The conventional approach for delivery is through injection of aqueous remedial solutions. However, heterogeneous vadose zone environments present hydrologic and geochemical challenges that limit the effectiveness. Because the flow of solution infiltration is dominantly controlled by gravity and suction, injected liquid preferentially percolates through highly permeable pathways, by-passing low-permeability zones which frequently contain the majority of the contamination. Moreover, the wetting front can readily mobilize and enhance contaminant transport to underlying aquifers prior to stabilization. Development of innovative, in-situ technologies may be the only way to meet remedial action objectives and long-term stewardship goals. Shear-thinning fluids (i.e., surfactants) can be used to lower the liquid surface tension and create stabile foams, which readily penetrate low permeability zones. Although surfactant foams have been utilized for subsurface mobilization efforts in the oil and gas industry, so far, the concept of using foams as a delivery mechanism for transporting reactive remedial amendments into deep vadose zone environments to stabilize metal and long-lived radionuclide contaminants has not been explored. Foam flow can be directed by pressure gradients, rather than being dominated by gravity; and, foam delivery mechanisms limit the volume of water (< 20% vol.) required for remedy delivery and emplacement, thus mitigating contaminant mobilization. We will present the results of a numerical modeling and integrated laboratory-/ intermediate-scale investigation to simulate, develop, demonstrate, and monitor (i.e. advanced geophysical techniques and advanced predictive biomarkers) foam-based delivery of remedial amendments to remediate metals and radionuclides in vadose zone environments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Advanced Remedial Methods for Metals and Radionuclides in Vadose Zone Environments

Functionally, the methods for addressing contamination must remove and/or reduce transport or toxicity of contaminants. This problem is particularly challenging in arid environments where the vadose zone can be up to hundreds of feet thick, rendering transitional excavation methods exceedingly costly and ineffective. Delivery of remedial amendments is one of the most challenging and critical aspects for all remedy-based approaches. The conventional approach for delivery is through injection of aqueous remedial solutions. However, heterogeneous vadose zone environments present hydrologic and geochemical challenges that limit the effectiveness. Because the flow of solution infiltration is dominantly controlled by gravity and suction, injected liquid preferentially percolates through highly permeable pathways, bypassing low-permeability zones which frequently contain the majority of the contamination. Moreover, the wetting front can readily mobilize and enhance contaminant transport to underlying aquifers prior to stabilization. Development of innovative, in-situ technologies may be the only way to meet remedial action objectives and long-term stewardship goals. Shear-thinning fluids (i.e., surfactants) can be used to lower the liquid surface tension and create stabile foams, which readily penetrate low permeability zones. Although surfactant foams have been utilized for subsurface mobilization efforts in the oil and gas industry, so far, the concept of using foams as a delivery mechanism for transporting reactive remedial amendments into deep vadose zone environments to stabilize metal and long-lived radionuclide contaminants has not been explored. Foam flow can be directed by pressure gradients rather than being dominated by gravity, and, foam delivery mechanisms limit the volume of water (< 20% vol.) required for remedy delivery and emplacement, thus mitigating contaminant mobilization. We will present the results of an integrated laboratory- / intermediate-scale investigation to simulate, develop, demonstrate, and monitor (using advanced geophysical techniques and natural marker monitoring) foam-based delivery of remedial amendments to stabilize metals and radionuclides in vadose zone environments.

Foam Delivery↗

Determination of electric-dipole matrix elements in K and Rb from Stark shift measurements

Stark shifts of potassium and rubidium D1 lines have been measured with high precision by Miller et al. [Phys. Rev. A 49, 5128 (1994)]. In this work, we combine these measurements with our all-order calculations to determine the values of the electric-dipole matrix elements for the 4p{sub j}-3d{sub j{sup '}} transitions in K and the 5p{sub j}-4d{sub j{sup '}} transitions in Rb to high precision. The 4p{sub 1/2}-3d{sub 3/2} and 5p{sub 1/2}-4d{sub 3/2} transitions contribute on the order of 90% to the respective polarizabilities of the np{sub 1/2} states in K and Rb, and the remaining 10% can be accurately calculated using the relativistic all-order method. Therefore, the combination of the experimental data and theoretical calculations allows us to determine the np-(n-1)d matrix elements and their uncertainties. We compare these values with our all-order calculations of the np-(n-1)d matrix elements in K and Rb for a benchmark test of the accuracy of the all-order method for transitions involving nd states. Such matrix elements are of special interest for many applications, such as determination of ''magic'' wavelengths in alkali-metal atoms for state-insensitive cooling and trapping, and determination of blackbody radiation shifts in optical frequency standards with ions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Digital signal processing in coupled photonic crystal waveguides and its application to an all-optical AND logic gate

The realization of all-optical AND logic gates for pulsed signal operation based on the photonic bandgap transmission phenomenon is proposed. We are using realistic planar air-hole type coupled photonic crystal waveguides (C-PCWs) with Kerr-type nonlinear background medium. The novelty of our analysis is that the proposed AND logic gate operates with the temporal solitons, which maintain a stable envelope propagating in the nonlinear C-PCWs, enabling true ultrafast full-optical digital signal processing in the time-domain. The bandgap transmission takes place when the operating frequency is chosen at the very edge of the dispersion curve of one of the supermodes in the C-PCWs. In this regard, our original fast and accurate method is used to efficiently calculate the supermodes of the C-PCW system. The underlying semi-analytical full-wave modal analysis is based on the evaluation of the lattice sums for complex wavenumbers using the transition-matrix method in combination with the generalized reflection-matrix approach. As a proof of concept successful pulse operation of the all-optical AND logic gate is demonstrated in the framework of extensive full-wave finite-difference time-domain electromagnetics analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamic Functions and Electrical Resistivity of Fluid Lead in the Metal–Nonmetal Transition Range

A dynamic method is used to measure the thermodynamic functions and the electrical resistivity of fluid lead for a wide range of specific volume and pressure. The measurements errors have been reduced to a level comparable to those of stationary methods. It is found that the transition of the fluid from the metallic state to a nonmetallic state occurs when its specific volume increases 2.7 times relative to the normal value. In each individual experiment the transition occurred at almost a constant pressure, and was detected by the change in sign of the isochoric temperature coefficient of resistance determined for the entire series of the experiments. In the pressure range of 0.6–5 GPa, the specific volume at which the metal–nonmetal transition occurs is found to be independent of pressure, and therefore, the transition line is close to an isochore. For the whole range of states of fluid lead investigated here, the speed of sound and the Grüneisen coefficient have been determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transitions and unusual behavior of heat capacity in metal organic framework compound Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6}

Thermodynamic properties of high-porous metal-organic framework (MOF) compound Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6} were studied in the temperature range 8.9–300 K using low-temperature adiabatic calorymetry and DSC methods. Phase transitions were observed at ∼15, ∼60, and ∼135 K. It is shown that specific heat of the compound obeys the classical Debye law C{sub p}∼T{sup 3} only below 15 K, whereas above 15 K it is proportional to the first degree of temperature, C{sub p}∼T, to indicate a strong anisotropy of crystal vibrations corresponding to 1D continuum. It is shown that the strong anisotropy can be related to coordination interaction of Zn{sup 2+} and N{sub 2}(CH{sub 2}){sub 6} ligands in the specific structure of compound Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6}. - Graphical abstract: Specific heat C{sub p} is proportional to the first degree of temperature showing a strong anisotropy of crystal vibrations corresponding to 1D continuum in Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6.} - Highlights: • Specific heat capacity of Zn{sub 2}(C{sub 8}H{sub 4}O{sub 4}){sub 2}·N{sub 2}(CH{sub 2}){sub 6} was first studied at 8.9–300 K. • Phase transitions were observed at ∼15, ∼60, and ∼135 K. • The heat capacity is proportional to the first degree of temperature above 15 K. • The discovered dependency corresponds to a one-dimensional vibration continuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Mesh-Free Method to Predictively Simulate Solid-to-Liquid Phase Transitions in Abnormal Thermal Environments

Particle methods in computational physics are useful for modeling the motion of fluids and solids subject to large deformations. Under these conditions, mesh-based approaches often fail due to decreasing element quality leading to inaccuracy and instability. The developed software package called Moab investigates and prototypes next-generation particle methods, focusing on rigorous error analysis and active error minimization strategies during the computation. The present work discusses examples calculations representative of real engineering problems with quantified and maximized accuracy while demonstrating the potential for meeting engineering performance requirements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ANALYTIC DESCRIPTION OF THE ROSSITER-MCLAUGHLIN EFFECT FOR TRANSITING EXOPLANETS: CROSS-CORRELATION METHOD AND COMPARISON WITH SIMULATED DATA

We obtain analytical expressions for the velocity anomaly due to the Rossiter-McLaughlin (RM) effect, for the case when the anomalous radial velocity is obtained by cross-correlation with a stellar template spectrum. In the limit of vanishing width of the stellar absorption lines, our result reduces to the formula derived by Ohta et al., which is based on the first moment of distorted stellar lines. Our new formula contains a term dependent on the stellar line width, which becomes important when rotational line broadening is appreciable. We generate mock transit spectra for four existing exoplanetary systems (HD 17156, TrES-2, TrES-4, and HD 209458) following the procedure of Winn et al., and find that the new formula is in better agreement with the velocity anomaly extracted from the mock data. Thus, our result provides a more reliable analytical description of the velocity anomaly due to the RM effect, and explains the previously observed dependence of the velocity anomaly on the stellar rotation velocity.

79 ASTRONOMY AND ASTROPHYSICS↗

On the dosimetric effect and reduction of inverse consistency and transitivity errors in deformable image registration for dose accumulation

Purpose: Deformable image registration (DIR) is necessary for accurate dose accumulation between multiple radiotherapy image sets. DIR algorithms can suffer from inverse and transitivity inconsistencies. When using deformation vector fields (DVFs) that exhibit inverse-inconsistency and are nontransitive, dose accumulation on a given image set via different image pathways will lead to different accumulated doses. The purpose of this study was to investigate the dosimetric effect of and propose a postprocessing solution to reduce inverse consistency and transitivity errors. Methods: Four MVCT images and four phases of a lung 4DCT, each with an associated calculated dose, were selected for analysis. DVFs between all four images in each data set were created using the Fast Symmetric Demons algorithm. Dose was accumulated on the fourth image in each set using DIR via two different image pathways. The two accumulated doses on the fourth image were compared. The inverse consistency and transitivity errors in the DVFs were then reduced. The dose accumulation was repeated using the processed DVFs, the results of which were compared with the accumulated dose from the original DVFs. To evaluate the influence of the postprocessing technique on DVF accuracy, the original and processed DVF accuracy was evaluated on the lung 4DCT data on which anatomical landmarks had been identified by an expert. Results: Dose accumulation to the same image via different image pathways resulted in two different accumulated dose results. After the inverse consistency errors were reduced, the difference between the accumulated doses diminished. The difference was further reduced after reducing the transitivity errors. The postprocessing technique had minimal effect on the accuracy of the DVF for the lung 4DCT images. Conclusions: This study shows that inverse consistency and transitivity errors in DIR have a significant dosimetric effect in dose accumulation; Depending on the image pathway taken to accumulate the dose, different results may be obtained. A postprocessing technique that reduces inverse consistency and transitivity error is presented, which allows for consistent dose accumulation regardless of the image pathway followed.

61 RADIATION PROTECTION AND DOSIMETRY↗

Observation of a 2D Bose Gas: From Thermal to Quasicondensate to Superfluid

We present experimental results on a Bose gas in a quasi-2D geometry near the Berezinskii, Kosterlitz, and Thouless (BKT) transition temperature. By measuring the density profile after time of flight and the coherence length, we identify different states of the gas. We observe that the gas develops a bimodal distribution without long range order. In this regime, the gas presents a longer coherence length than the thermal cloud; it is quasicondensed but is not superfluid. Experimental evidence indicates that we also observe the superfluid transition (BKT transition). For a sufficiently long time of flight, we observe a trimodal distribution when the gas has developed a superfluid component.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗