SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Engineering developments in plasma probes, ionized gas, electron emission, electrochemical fuel cells, solar-thermal energy conversion, and nonlinear heat transfer phenomena
The analysis of porosity and pore structure of shale rocks has received special attention in the last decades as unconventional reservoir hydrocarbons have become a larger parcel of the oil and gas market. A variety of techniques are available to provide a satisfactory description of these porous media. Some techniques are based on saturating the porous rock with a fluid to probe the pore structure. In this sense, gases have played an important role in porosity and pore structure characterization, particularly for the analysis of pore size and shapes and storage or intake capacity. In this review, we discuss the use of various gases, with emphasis on N2 and CO2, for characterization of shale pore architecture. We describe the state of the art on the related inversion methods for processing the corresponding isotherms and the procedure to obtain surface area and pore-size distribution. The state of the art is based on the collation of publications in the last 10 years. Limitations of the gas adsorption technique and the associated inversion methods as well as the most suitable scenario for its application are presented in this review. Finally, we discuss the future of gas adsorption for shale characterization, which we believe will rely on hybridization with other techniques to overcome some of the limitations.
Hydraulic fracturing of unconventional oil/gas shales has changed the energy landscape of the U.S.. Recovery of hydrocarbons from tight, hydraulically fractured shales is a highly inefficient process, with estimated recoveries of < 25% for natural gas and < 5% for oil. This review focuses on the complex chemical interactions of additives in hydraulic fracturing fluid (HFF) with minerals and organic matter in oil/gas shales. These interactions are intended to increase hydrocarbon recovery by increasing porosities and permeabilities of tight shales. However, fluid-shale interactions result in the dissolution of shale minerals and the release and transport of chemical components. They also result in mineral precipitation in the shale matrix, which can reduce permeability, porosity, and hydrocarbon recovery. Competition between mineral dissolution and mineral precipitation processes influences the amounts of oil and gas recovered. We review the temporal/spatial origins and distribution of unconventional oil/gas shales from mudstones and shales, followed by discussion of their global and U.S. distributions and compositional differences from different U.S. sedimentary basins. We discuss the major types of chemical additives in HFF with their intended purposes, including drilling muds. Fracture distribution, porosity, permeability, and the identity and molecular-level speciation of minerals and organic matter in oil/gas shales throughout the hydraulic fracturing process are discussed. Also discussed are analysis methods used in characterizing oil/gas shales before and after hydraulic fracturing, including permeametry and porosimetry measurements, X-ray diffraction/Rietveld refinement, X-ray computed tomography, scanning/transmission electron microscopy, and laboratory- and synchrotron-based imaging/spectroscopic methods. Reactive transport and spatial scaling are discussed in some detail in order to relate fundamental molecular-scale processes to fluid transport. Furthermore, our review concludes with a discussion of potential environmental impacts of hydraulic fracturing and important knowledge gaps that must be bridged to achieve improved mechanistic understanding of fluid transport in oil/gas shales.
Understanding the formation of pore space, especially in low porosity shales (as source rocks and as unconventional resources), is critical to the oil and gas industry, since pores control the space available for hydrocarbon and participate in hydrocarbon transport. We examined 87 Ordovician and Silurian mudstone samples collected from four wells located in the Pomeranian part of the Baltic Basin (northern Poland), one of the primary Polish targets for hydrocarbon exploration. These samples represent the Pelplin, the Paslek, the Jantar, the Prabuty, and the Sasino Formations, which still requires more detailed porosity studies. Our study aimed to identify factors controlling porosity development, by applying bulk techniques (organic petrology and TOC analyses, quantitative mineralogy, and porosimetry) as well as nano- to microscale techniques (thin section petrography, electron microscopy). The studied samples are mainly argillaceous mudstones. The results of porosimetry measurements, combined with image analysis, indicate that the pores of all studied rocks are dominated by micropores (pores < 2 nm in diameter), mesopores (2-50 nm in diameter) and small macropores. The SEM images showed three main pore types: a) voids related to clay mineral aggregates, b) pores inside organic matter particles, and c) pores between other mineral grains. In the Jantar and Sasino mudstones, the organic matter content and its thermal maturity control porosity. The occurrence of solid bitumen in the rocks from these formations reduces samples’ mesoporosity because of the pore-clogging effect. In contrast, in the Paslek and Prabuty Formations, there is low organic matter content and specific surface area and the volume of mesopores increase with clay minerals content. In the Pelplin mudstones, there are no prevailing factors controlling porosity. As a result, we suggest that a combination of SEM image analysis and dual liquid porosity (DLP) measurements is a powerful method to assess porosity available for petroleum flow in mudstones.
What if an experiment could combine the power of cycloaddition and cross-coupling with the in situ formation of an aromatic molecule in a single collision? Crossed molecular beam experiments augmented with electronic structure and statistical calculations provided compelling evidence on a novel radical route involving 1,3-butadiynyl (HCCCC; X 2 Σ + ) radicals synthesizing (substituted) arylacetylenes in the gas phase upon reactions with 1,3-butadiene (CH 2 CHCHCH 2 ; X 1 Ag) and 2-methyl-1,3-butadiene (isoprene; CH 2 C(CH 3 )CHCH 2 ; X 1 A'). Furthermore, this elegant mechanism de facto merges two previously disconnected concepts of cross-coupling and cycloaddition–aromatization in a single collision event via the formation of two new C(sp 2 )–C(sp 2 ) bonds and bending the 180° moiety of the linear 1,3-butadiynyl radical out of the ordinary by 60° to 120°. In addition to its importance to fundamental organic chemistry, this unconventional mechanism links two previously separated routes of gas-phase molecular mass growth processes of polyacetylenes and polycyclic aromatic hydrocarbons (PAHs), respectively, in low-temperature environments such as in cold molecular clouds like the Taurus Molecular Cloud (TMC-1) and in hydrocarbon-rich atmospheres of planets and their moons such as Titan, what revises the established understanding of low-temperature molecular mass growth processes in the Universe.
The present investigation is concerned with a miniature metastable ionization detector featuring an unconventional electrode configuration, whose performance characteristics parallel those of traditional design. The ionization detector is to be incorporated in a flight gas chromatograph (GC) for use in the Space Shuttle. The design of the detector is discussed, taking into account studies which verified the sensitivity of the detector. The triaxial design of the detector is compared with a flat-plate style. The obtained results show that the principal goal of developing a miniature, highly sensitive ionization detector for flight applications was achieved. Improved fabrication techniques will utilize glass-to-metal seals and brazing procedures.
Technological advancements have led to impressive growth in hydrocarbon (HC) production from unconventional shale reservoirs. However, major limiting factors in shale gas development are i) low recovery of gas in place (<20%), (ii) a rapid decline in well productivity, iii) release of contaminants, despite the use of advanced hydraulic fracturing fluids and multiple fracturing stages. This is mainly due to a lack of understanding of the nanoscale physicochemical properties of shales, especially that of kerogen, the macromolecule that is not only the source of the majority of the HC’s in shales but also holds most of the HC’s in adsorbed state. Over the last few years, a large number of studies have been published on simulating the physicochemical properties of shale utilizing molecular models of kerogen. However, the molecular models of kerogen input into these simulations are based on the kerogen “type” derived from a very limited number of shale samples. In this paper, we examine the variations that can exist in kerogen structure within a particular kerogen “type” across different shale basins and single shale basin at similar thermal maturity levels. We propose that using kerogen “type” based structural models for molecular simulations could lead to inaccurate estimation of HC reserves, HC recovery, HC production, frackability, and quantity and quality of produced water. Our study highlights the need for developing a better classification of kerogen based on its “molecular structure” instead of “type” for a more accurate prediction of physicochemical properties of shales.
Transition-metal dichalcogenide (TMD) bilayers are a new class of tunable moiré systems attracting interest as quantum simulators of strongly interacting electrons in two dimensions. In particular, recent theory predicts that the correlated insulator observed in WSe 2 /WS 2 at half filling is a charge-transfer insulator similar to cuprates and, upon further hole doping, exhibits a transfer of charge from anionlike to cationlike orbitals at different locations in the moiré unit cell. In this work, we demonstrate that in this doped charge-transfer insulator, tightly bound charge-2$\textit{e}$ excitations can form to lower the total electrostatic repulsion. This composite excitation, which we dub a trimer, consists of a pair of holes bound to a charge-transfer exciton. When the bandwidth of doped holes is small, trimers crystallize into insulating pair density waves at a sequence of commensurate doping levels. Further, when the bandwidth becomes comparable to the pair binding energy, itinerant holes and charge-2$\textit{e}$ trimers interact resonantly, leading to unconventional superconductivity similar to superfluidity in an ultracold Fermi gas near Feshbach resonance. Our theory is broadly applicable to strongly interacting charge-transfer insulators, such as WSe 2 /WS 2 or TMD homobilayers under an applied electric field.
Abstract By harnessing both hypothetical, synthetic basin and gas hydrate (GH) system models and real‐world models of well‐studied salt diapir‐associated GH sites at Green Canyon (Gulf of Mexico) and Blake Ridge (U.S. Atlantic coast), we propose and demonstrate salt movement (and in particular, diapirism) to be a new mechanism for the recycling of marine GH. At Green Canyon, for example, we show that by considering this newly proposed diapir‐driven recycling mechanism in conjunction with previously proposed lithological control on sandy‐reservoir‐hosted hydrate at the base of the GH stability zone (BGHSZ; ∼bottom‐simulating reflector, BSR), modeled GH saturations match drilling data. Overall, salt diapir movement‐induced GH recycling provides a temperature‐driven mechanism by which GH saturations at the BGHSZ may reach >90 vol. % and by which GH volumes near and free gas volumes beneath the BGHSZ may be increased significantly through time. Interestingly, comparison of salt diapir‐driven recycling and sediment burial‐driven recycling scenarios suggests notably higher rates of recycling via diapir‐driven versus burial‐driven processes. Our results suggest that GH and associated free gas accumulations above salt diapir crests represent particularly attractive targets for unconventional and conventional hydrocarbon resource exploration and for scientific and academic drilling expeditions aimed at exploiting GH systems. Salt basins containing GH systems—including passive margin basins of the Gulf of Mexico, southeastern Brazil, and southwestern Africa—are therefore compelling localities for studying salt‐driven GH recycling and for salt diapir‐associated natural gas exploration.
V/STOL aircraft rely on their propulsion systems to provide lift and attitude control moments during hover and low-speed flight. For lift-fan powered V/STOL aircraft, two unconventional propulsion system types have been proposed. The first type uses fans connected by hot gas ducting, and the second type uses fans connected by cross shafting. This paper presents results of an analytical study which identifies the basic steady-state and dynamic characteristics for each type of system. For the gas-coupled system, the control concepts analyzed were variable-area fan turbines and throttling valves in the ducting. For the shaft-coupled system, the control concepts analyzed were variable-pitch fans and variable fan inlet guide vanes. All of these concepts are shown to be capable of meeting V/STOL aircraft control moment and transient response requirements when appropriate propulsion controls are used. Each type of system has unique problem areas which require an integrated approach to aircraft/propulsion control design.
A concept is described for using a very fuel-rich partial oxidation process as the first stage of a two-stage combustion system for onboard processing of broadened specification fuels to improve their combustion characteristics. Results of an initial step in the experimental verification of the concept are presented, where the basic benefits of H2 enrichment are shown to provide extended lean-combustion limits and permit simultaneous achievement of ultralow levels of NOx, CO, and HC emissions. The H2 required to obtain these results is within the range available from a partial oxidation precombustion stage. Operation of a catalytic partial oxidation reactor using a conventional aviation turbine fuel (JP5) and an unconventional fuel (blend of JP5/xylene) is shown to produce a 'fuel gas' stream with near-theoretical equilibrium H2 content. However, a number of design considerations indicate that the precombustion stage should be incorporated as a thermal reaction.
Flaring is widely practiced in the oil, gas, and petrochemical sectors to ensure safety during upsets and maintenance but emits large amounts of GHGs, causing energy and economic losses. In the U.S., about one-third of Bakken gas (~250 MMSCFD) and ~100 MMSCFD from Eagle Ford are flared. Recovering this gas is essential for sustainability. Existing recovery methods—compression and reinjection (EOR), conversion to NGL, LNG/CNG, GTL, and GTW—are often limited by flowrate, composition, and variability, especially in unconventional wells. This study develops a microwave-assisted dehydroaromatization (DHA) process to convert flare gas into benzene, toluene, ethylene, and naphthalene. A laboratory reactor model is scaled up into a modular plant-wide system. Techno-economic (TEA) and life-cycle (LCA) analyses evaluate performance and sustainability, with sensitivity studies on plant capacity, electricity cost, and catalyst price confirming strong economic potential.
Shale is characterized by the predominant presence of nanometer-scale (1-100 nm) pores. The behavior of fluids in those pores directly controls shale gas storage and release in shale matrix and ultimately the wellbore production in unconventional reservoirs. Recently, it has been recognized that a fluid confined in nanopores can behave dramatically differently from the corresponding bulk phase due to nanopore confinement. CO 2 and H 2 O, either preexisting or introduced, are two major components that coexist with shale gas (predominately CH 4 ) during hydrofracturing and gas extraction. Note that liquid or supercritical CO 2 has been suggested as an alternative fluid for subsurface fracturing such that CO 2 enhanced gas recovery can also serve as a CO 2 sequestration process. Limited data indicate that CO 2 may preferentially adsorb in nanopores (particularly those in kerogen) and therefore displace CH 4 in shale. Similarly, the presence of water moisture seems able to displace or trap CH 4 in shale matrix. Therefore, fundamental understanding of CH 4 -CO 2 -H 2 O behavior and their interactions in shale nanopores is of great importance for gas production and the related CO 2 sequestration. This project focuses on the systematic study of CH 4 -CO 2 -H 2 O interactions in shale nanopores under high-pressure and high temperature reservoir conditions. The proposed work will help develop new stimulation strategies to enable efficient resource recovery from fewer and less environmentally impactful wells.
Model-based optimization for real-time forecasting in unconventional reser-voirs requires novel methods and work?ows since the strategies and work?ows used in conventional reservoirs are either inapplicable, or prohibitively expen-sive and time-consuming. Insu?cient site data and computational expense of high-?delity simulations mean that work?ows with high-?delity simulations are not ideal for usage in comprehensive uncertainty quanti?cation stud-ies that require 1000s of forward model runs. We present an alternative, novel work?ow for unconventional reservoirs, based on the interplay between reduced-order models and machine-learning. Our physics-informed machine-learning (PIML) work?ow addresses the challenges to real-time reservoir management in uncoventionals, namely lack of data (the time-frame for which the wells have been producing), and computational expense of high-?delity modeling. We use the machine-learning paradigm of transfer-learning to bind together fast but less accurate reduced-order models with slow, but accurate high-?delity models and circumvent the di?culties inherent in the current state-of-the-art for unconventionals. Such a PIML work?ow, grounded in physics, is a viable candidate for real-time history matching and production forecasting in a fractured shale gas reservoir. The signi?cance of our approach is that while it is developed for a particu-lar well and site in the Marcelus Shale gas reservoir of the Appalachian basin (MSEEL), it is not wedded to it. We expect the same work?ow can be ap-plied to other shale formations (e.g., Woodford, Barnett, Utica, EagleFord) should site-data become available, using the same set of machine-learning techniques from transfer learning. Some ?ne-tuning (or minimal retraining of the neural networks) will be required to transfer knowledge across shale gas sites/formations but it is a clearly superior alternative to developing a new machine-learning model altogether when considering a di?erent site.
Fiber Optic monitoring in unconventional reservoirs has proven to be an invaluable diagnostic tool for assessing both near-wellbore stimulation effectiveness and to help describe the far-field frac geometries created by hydraulic fracture stimulation. Unfortunately, gaining any detailed qualitative and quantitative understanding of the near-wellbore frac geometry or cluster/stage productivity during production via Fiber Optic (FO) has proven to be more difficult, particularly in wells producing liquids. A new FO diagnostic method, Distributed Strain Sensing based on Rayleigh Frequency Shift (DSS-RFS), first demonstrated for oil and gas applications in the Hydraulic Test Site 2 (HFTS2) provides new insights about the characteristics of near-wellbore-region (NWR) during production. DSS-RFS is different from other FO strain measurements because it relies on accurate measurement of frequency shifts of Rayleigh backscattered spectrum obtained by scanning the fiber with a coherent optical time-domain reflectometer with a range of laser frequencies using a tunable-wavelength laser system. Changes in strain are measured with an extremely high spatial resolution of 20 cm and with high signal-to-noise ratios over long distances. In HFTS2, strain changes for the entire wellbore have been measured twice during scheduled shut-in and reopening operations (February 2020 and September 2020). After removing temperature effects, consistent strain changes have been observed at the location of most perforation clusters. These are caused by near wellbore fracture aperture changes due to pressure increases during shut-in within the near-wellbore fracture network. The strain-change patterns from the DSS-RFS during shut-in correlate very well with the location of clusters and allow for the definition of extending intervals with positive strain signals at each cluster and slightly compressing intervals with negative strain signals between the clusters and in the non stimulated intervals. The locations of the measured positive strain peaks also show good correspondence to DAS acoustic intensity measurements acquired during the stimulation. The geometry and magnitude of the strain changes differ significantly between the two tested completion designs in the same well. During shut in and reopening each cluster exhibit its own strain-change / pressure path. In addition, the September 2020 dataset also revealed the existence of small but measurable strain changes as consequence of pressure decline during production. These strain changes also correlate well with the presence of producing clusters, but the strain-rate signals are opposite to that obtained during shut-in and reopening operations. Although Downloaded from http://onepetro.org/URTECONF/proceedings-pdf/21URTC/2-21URTC/D021S031R002/2477551/urtec-2021-5408-ms.pdf/1 by Carol Worster on 28 February 2022 URTeC 5408 2 we are still in the early stages of exploring the potential of this novel FO technique, we believe that the highly detailed information contained in the measurement of strain changes using DSS-RFS during production can significantly improve our understanding of near-wellbore hydraulic fracture characteristics and the relationships between stimulation and production from unconventional oil and gas wells.
Two-dimensional (2D) superconductors with spin-textured Fermi surfaces can be a platform for realizing unconventional pairing states and are of substantial interest in the context of quantum information science and superconducting spintronics/orbitronics. We observed an unusual in-plane uniaxial anisotropy in the superconducting 2D electron gas (2DEG) formed at EuOx/KTaO3 (110) interfaces. This anisotropy is not evident in AlOx/KTaO3 (110) where the overlayer is nonmagnetic. Our results are consistent with a highly anisotropic “half-Rashba” spin-textured Fermi surface in 2DEGs formed at the KTaO3 (110) interface that is hidden from external magnetic fields due to a near cancellation between orbital and spin moments but revealed by exchange interactions of the electrons in the 2DEG with Eu moments near the EuOx/KTaO3 (110) interface. The interactions between the uniaxial spin texture and the magnetic overlayer offer previously unexplored ways to explore the interplay between magnetism and 2D superconductivity.
Unitized regenerative fuel cells (URFC) convert electrical energy to and from chemical bonds in hydrogen. URFCs have the potential to provide economical means for efficient long-term, seasonal, energy storage and on-demand conversion back to electrical energy. We first optimize the catalyst layer for discrete electrolyzer and fuel cell and then configure the URFC. The goal is to identify a cost competitive configuration for URFCs, and demonstrate it in terms of upper limit of round trip efficiencies (RTEs). Two possible configurations of URFCs are compared via experiments and techno-economic analysis (TEA), which emphasize the advantages of the unconventional constant-electrode (CE) URFC over the traditional constant-gas (CG) configuration. We also study the stability via accelerated stress tests (ASTs) and demonstrate steady state operation in a daily cycle for day to night energy shifting. From the investigations, the optimum composition of the URFC anode catalyst layer is 90 at% Ir-black balanced by Pt-black for both CE and CG configurations. At 80 °C and 1 A cm -2 , the optimized CE URFC achieves 57% and 60% RTE with air and O 2 as the reductant gases, respectively. We then evaluated the differences in durability using an AST over 10k charge–discharge cycles; the results reveal that the wider potential window at the anode in CE (0.05–1.55 V) has minimal effect on catalyst layer stability compared to CG (0.55–1.55 V). Furthermore, there was no degradation up to the range of 2k–5k cycles; beyond that the fuel cell (discharge) performance degraded while the electrolyzer (charge) performance was still stable. Finally, the observations here indicate substantial potential to employ URFCs as efficient and cost-effective bidirectional energy-conversion devices within energy storage and utilization systems after appropriate technological and operational optimizations.
Summary The development and production of unconventional reservoirs, such as the Bakken Formation, have become a resolved mystery for operators in North America since the arrival and advancement of horizontal drilling and hydraulic fracturing technologies. As a result, unconventional reservoir assets became the central focus of the oil and gas industry at the state, national, and global levels. The produced water from these activities in the Bakken Formation have high salt contents (110,000–350,000 ppm) total dissolve solids (TDS) and can pose significant challenges to the environment if not treated. Deep injection into disposal wells is the routine method used to get rid of the Bakken produced water. However, there have been some concerns that unrestrained injections, in addition to polluting the groundwater, could potentially lead to seismic activities either at the time of injection or in the near future. To diminish the environmental impacts that may be associated with induced seismicity, including the reduction of the costs of water acquisition, the produced water can be treated and reused in the hydraulic fracturing processes. Also, the treated water could be used for irrigation purposes, for power generation, and coal mining operations. The issues of waste water and residual oil high in TDS are challenges yet to be effectively addressed despite preceding research and studies on advancing produced water technologies. The goal of this study is to explore all applicable ways by which the produced water from the Bakken Formation can serve as a replacement base fluid for use with polymers like the high-viscosity friction reducers (HVFRs) to create hydraulic fracturing fluids that can be stable with reservoir conditions and also be able to minimize environmental impacts and cost of operations. Experimental investigations using the high-salinity produced water from the Bakken Formation with HVFRs were carried out. The studies included a base case that served as a bench mark for comparing the effectiveness of the other scenarios. The results indicate that the Bakken hyper-saline produced water can withstand effect of heavy metals, salinity, hardness and remain stable through different shear rates (66–330 s−1) when treated with higher dosages [4–8 gal/1,000 gal (gpt)] of HVFRs. Filtration and dilution were the only methods used on the Bakken Formation produced wate for this research