SEARCH · Search NASA

Results for “uniformity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Influence of discharge polarity on streamer breakdown criterion of ambient air in a non-uniform electric field

Streamer breakdown of atmospheric air with non-uniform dc electric field in a needle-to-plate electrode configuration is studied using a semi-analytic model and experimental measurements. A high voltage (either positive or negative) is applied to a hollow needle with 0.51 mm outer diameter and 0.25 mm inner diameter separated from a planar ground electrode by a gap distance of 0.1–1.4 cm. Breakdown voltages are recorded for both positive and negative discharge polarities. Empirical relations between the critical avalanche size for streamer breakdown and the gap distance are proposed. Using these empirical relations, a semi-analytic model based on Meek's criterion for streamer breakdown is developed to accurately predict the measured breakdown voltages. It is found that for pd > 380 Torr cm (or d > 0.5 cm at one atmosphere) streamer breakdown of ambient air occurs at a lower applied voltage for a positively biased needle compared to that with a negatively biased needle, referred as the polarity effect. For pd < 380 Torr cm breakdown is attained at a lower applied voltage with a negatively biased needle compared to that with a positively biased needle, and breakdown mode transits from the polarity effect to the so called inverted polarity effect.

42 ENGINEERING↗

DOE OSTI2020

Chapter 17: Residential Behavior Evaluation Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures, September 2011 - August 2020

This document has been updated in August 2020. This document was developed for the U.S. Department of Energy Uniform Methods Project (UMP). The UMP provides model protocols for determining energy and demand savings that result from specific energy-efficiency measures implemented through state and utility programs. In most cases, the measure protocols are based on a particular option identified by the International Performance Verification and Measurement Protocol; however, this work provides a more detailed approach to implementing that option. Each chapter is written by technical experts in collaboration with their peers, reviewed by industry experts, and subject to public review and comment. The protocols are updated on an as-needed basis. The UMP protocols can be used by utilities, program administrators, public utility commissions,evaluators, and other stakeholders for both program planning and evaluation. To learn more about the UMP, visit the website, https://energy.gov/eere/about-us/ump-home, or download the UMP introduction document at http://www.nrel.gov/docs/fy17osti/68557.pdf.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

The Uniform Methods Project: Smart Thermostat Evaluation Protocol

A smart thermostat is an internet-connected device that controls home heating, ventilation, and air-conditioning (HVAC) equipment and can automatically adjust temperature set points to optimize performance and achieve energy savings. Smart thermostat features often include two way communication, occupancy detection (such as geofencing and occupancy sensors), schedule learning, and seasonal optimization algorithms. Smart thermostats can control most conventional HVAC systems, including central air conditioners, heat pumps, and forced air furnaces. Several types of residential utility programs offer smart thermostats as replacements measures. Working with smart thermostat vendors, utilities can offer separate optimization programs to produce energy savings beyond those achieved by installing a smart thermostat. From an evaluation perspective, smart thermostat programs have several noteworthy features. First, the energy savings from a smart thermostat may change over the life of the device. As a smart thermostat is connected to the internet, original equipment manufacturers can update the thermostat software to improve the thermostat's energy efficiency. Likewise, users can adjust the thermostat settings and schedules over time in response to changes in weather, thermal comfort, energy prices, or preferences for energy efficiency. Additionally, many thermostat manufacturers offer seasonal optimization programs that recommend changes or make minor, automated adjustments to the thermostat settings to improve energy efficiency. These opt-in programs are now standard offerings for many smart thermostat manufacturers and provided at no additional cost to users. The potential for software updates and continuous optimization and the evolving nature of user interactions mean future energy savings may differ from first-year savings and the energy savings of smart thermostats may need to be evaluated more than once. Second, smart thermostats often have small unit energy savings relative to a home's total energy consumption, especially in comparison to whole- home retrofit programs. This can make it difficult to detect the smart thermostat savings in billing or advanced metering infrastructure (AMI) meter consumption data. For example, as cooling loads in many regions average about 20% of annual electricity consumption, smart thermostat savings of 10% of cooling energy use would equate to a 2% reduction in home electricity consumption. Evaluators should use regression analysis of whole-home billing consumption or advanced metering infrastructure (AMI) meter consumption data to evaluate smart thermostat savings because, as explained at greater length below , these data are usually available to evaluators and regression can control for the impacts of weather and other potentially confounding factors on a home's energy consumption. Finally, as with other energy efficiency programs, participation in smart thermostat programs is self-selective. As discussed at greater length below , smart thermostat participants tend to be, among other things, younger, higher-income, and more likely to adopt electric vehicles (EVs) and internet connected devices than nonparticipants. These differences are often unobservable to the evaluator and correlated with a home's energy consumption, creating the potential for bias in estimating savings. Due to the small unit savings of thermostats, errors and biases from self-selection that may not be very consequential when evaluating a whole- home retrofits (e.g., ±2% of home electricity consumption) can have a major impact when evaluating the savings and cost-effectiveness of smart thermostat programs. A percentage point change in the estimated savings could affect the cost-effectiveness of a program. This means it is important for evaluators to assess and to minimize the potential for error from selection bias in estimating smart thermostat program savings. The Uniform Methods Project provides model protocols for determining energy savings and demand reductions that result from specific energy efficiency measures implemented through state and utility programs. In most cases, the measure protocols are based on a particular option identified by the International Performance Verification and Measurement Protocol ; however, this work provides a more detailed approach to implementing that option. Each chapter is written by technical experts in collaboration with their peers, reviewed by industry experts, and subject to public review and comment. The UMP protocols can be used by utilities, program administrators, public utility commissions, evaluators, and other stakeholders for both program planning and evaluation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2026

Uniform Methods Project: History and Updates [Slides]

This presentation provides an overview of the 2026 update effort and summarizes the drivers and history of the Uniform Methods Project (UMP). The presentation will be used in a public webinar to facilitate stakeholder participation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2021

Deriving Simulation Parameters for Storage-Type Water Heaters Using Ratings Data Produced from the Uniform Energy Factor Test Procedure: Preprint

Building energy modeling (BEM) is commonly used to estimate the energy usage of residential buildings. Uses for BEM include calculating home energy ratings, demonstrating compliance with performance-based energy codes, and establishing whether designs meet voluntary program requirements, such as ENERGY STAR® qualified homes. BEM requires simulating subsystems within the building, including storage-type water heaters. To properly simulate the in-situ performance of residential storage water heaters, it is necessary to determine key water heater parameters, including the overall heat loss coefficient (UA) and conversion efficiency (?c) of the water heater, based on the rated efficiency of the water heater. The testing procedure and rating standard for residential water heaters have recently changed: the new rating standard provides a Uniform Energy Factor (UEF) rather than the Energy Factor (EF) used previously. This paper discusses how to derive the necessary model parameters from the ratings data produced from the latest test procedure.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2021

Torrefaction of Sorted MSW Pellets for Uniform Biopower Feedstock

The project objective is to use advanced compositional and thermophysical characterization methods from INL to support the evaluation of new production pathways (partnered with MTU) to biopower applications under the guidance of an industrial partner operating the in U.S. power sector (CE). Ultimately, this project aims to create a uniform feedstock from non-recyclable wastes that can be used in bioenergy and biomaterials, which torrefaction and preprocessing strategies are critical to achieving this goal.

09 BIOMASS FUELS↗

DOE OSTI2025

Verification of the Uniformly-Ordered Binary Decision Algorithm in Correlated-Benchmark Whisper Calculations

Whisper is a nuclear criticality safety code package that aids analysts in validation exercises by computing upper subcritical limits (USL) for applications of interest. To obtain statistically meaningful, significant, and conservative USLs, the analyst must ensure that Whisper selects a sufficient number of benchmarks that are neutronically similar to the application. Many of the available benchmarks are correlated but are currently treated as independent, leading to an artificially small sample size, as their individual information contributions will be overestimated. To aid the analyst in obtaining a sufficient sample size, prior work [2] demonstrated application of the Uniformly-Ordered Binary Decision (UOBD) algorithm in adjusting benchmark weights to account for benchmark correlations. This work provides verification of the Whisper implementation and considers the impact of updated benchmark correlations compared to those available previously. We demonstrate that the UOBD algorithm performs as expected with an analytic example. With HEU-SOL-THERM-001 cases 1 through 10 as the applications, we compare the USLs computed with benchmark correlations available in the Whisper 1.1 release only to those computed with additional benchmark correlations from DICE 2023 and demonstrate substantive differences.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

In Situ Construction of Uniform and Robust Cathode–Electrolyte Interphase for Li-Rich Layered Oxides

The high-energy-density Li-rich layered oxides (LLOs) as promising cathodes for Li-ion batteries suffer from the dissolution of transition metals (especially manganese) and severe side reactions in conventional electrolytes, which greatly deteriorate their electrochemical performance. Herein, an in situ “anchoring + pouring” synergistic cathode-electrolyte interphase (CEI) construction is realized by using 1,3,6-hexanetricarbonitrile (HTCN) and tris(trimethylsilyl) phosphate (TMSP) electrolyte additives to alleviate the challenges of an LLO (Li 1.13 Mn 0.517 Ni 0.256 Co 0.097 O 2 ). HTCN with three nitrile groups can tightly anchor transition metals by coordinative interaction to form the CEI framework, and TMSP will electrochemically decompose to reshape the CEI layer. The uniform and robust in situ constructed CEI layer can suppress the transition metal dissolution, shield the cathode against diverse side reactions, and significantly improve the overall electrochemical performance of the cathode with a discharge voltage decay of only 0.5 mV/cycle -1 . Further investigations based on a series of experimental techniques and theoretical calculations have revealed the composition of in situ constructed CEI layers and their distribution, including the enhanced HTCN anchoring effect after lattice densification of LLOs. Finally, this study provides insights into the in situ CEI construction for enhancing the performance of high-energy and high-voltage cathode materials through effective, convenient and economical electrolyte approaches.

25 ENERGY STORAGE↗

DOE OSTI2024

Evolution of Surface Chemistry in Two‐Dimensional MXenes: From Mixed to Tunable Uniform Terminations

Abstract Surface chemistry of MXenes is of great interest as the terminations can define the intrinsic properties of this family of materials. The diverse and tunable terminations also distinguish MXenes from many other 2D materials. Conventional fluoride‐containing reagents etching approaches resulted in MXenes with mixed fluoro‐, oxo‐, and hydroxyl surface groups. The relatively strong chemical bonding of MXenes’ surface metal atoms with oxygen and fluorine makes post‐synthetic covalent surface modifications of such MXenes unfavorable. In this minireview, we focus on the recent advances in MXenes with uniform surface terminations. Unconventional methods, including Lewis acidic molten salt etching (LAMS) and bottom‐up direct synthesis, have been proven successful in producing halide‐terminated MXenes. These synthetic strategies have opened new possibilities for MXenes because weaker surface chemical bonds in halide‐terminated MXenes facilitate post‐synthetic covalent surface modifications. Both computational and experimental results on surface termination‐dependent properties are summarized and discussed. Finally, we offer our perspective on the opportunities and challenges in this exciting research field.

Jiang, Mengni↗

DOE OSTI2024

Evolution of Surface Chemistry in Two‐Dimensional MXenes: From Mixed to Tunable Uniform Terminations

Jiang, Mengni↗

DOE OSTI2022

Poly(acrylic acid) Enabling the Synthesis of Highly Uniform Silica Nanoparticles of sub-100 nm

Robust synthesis of small colloidal silica (SiO 2 ) nanoparticles with narrow size distributions (<5%) is challenging because the possible involvement of continuous nucleation and growth of SiO 2 in the widely used Stöber process usually results in silica nanoparticles with large sizes and broad size distributions. Promoting heterogeneous nucleation and growth of silica is promising to tackle the challenges by in-situ forming transient colloidal seeds that provide nucleation surfaces for silica condensate. Here in this work, poly(acrylic acid) (PAA) is introduced to the Stöber synthesis solutions, which are usually composed of ethanol (containing a trace amount of water), tetraethyl orthosilicate (TEOS), and ammonia, to mediate the nucleation of TEOS hydrolysates and growth of SiO 2 nanoparticles. PAA reacts with ammonia to form soft PAA-NH 3 complex colloids that serve as transient seeds to facilitate heterogeneous nucleation and growth of SiO 2 nanoparticles after adding TEOS to the synthesis solution. The number of PAA-NH 3 complex colloidal particles, which strongly depends on the molar ratio of PAA and ammonia, determines the number of the resulting SiO 2 nanoparticles and thus the size of the SiO 2 nanoparticles correspondingly according to the supply of TEOS. Highly uniform SiO 2 nanoparticles with finely tuned diameters in the sub-100 region have been successfully synthesized, and the synthesis protocol is feasible to be scaled up while maintaining the high quality of SiO 2 nanoparticles.

heterogeneous nucleation and growth of nanoparticl↗

DOE OSTI2022

The fluid definition of the ‘waters of the United States’: Non-uniform effects of regulation on US wetland protections

Recent revisions to the definition of the ‘waters of the United States’ (WOTUS) have considerably altered how wetlands are federally regulated under the Clean Water Act. The two most recent modifications to WOTUS, the Clean Water Rule (CWR) and the Navigable Waters Protection Rule (NWPR), represent two opposing approaches to the federal wetland policy. The impacts of these two rules on the regulation of wetlands have as of yet been poorly characterized at broad spatial scales. Using New York State (NYS) as a case study, we evaluated the jurisdictional statuses of more than 253 000 wetlands under the CWR and the NWPR to assess the landscape-scale effects of WOTUS re-definitions. Here, we found that statewide and within each of NYS's hydrologic regions, the NWPR protects fewer wetlands and less total wetland area than the CWR. The efficacy of the two regulations varied considerably in space across NYS, highlighting the need for comprehensive, nationwide assessments of wetland policy outcomes. We also observed that both rules produced non-uniform patterns in jurisdiction across a range of landscape positions and wetland sizes, preferentially protecting large wetlands close to the stream network. This effect was particularly pronounced under the NWPR, which excludes all geographically isolated wetlands from protection. Our findings in NYS emphasize the existence of unique patterns in protected wetlands across spatial scales, highlighting the value in applying geospatial analyses to evaluate environmental policy.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

On the competition between mixing rate and uniformity in a coaxial hydrodynamic focusing mixer

Fast microfluidic mixers for use with line-of-sight integrating detection schemes pose unique challenges. Such detectors typically cannot discriminate signal from slow moving (e.g. near internal walls) and fast-moving portions of the fluid stream. This convolves reaction rate dynamics with fluid flow residence time dynamics. Further, the small cross sections of typical three-dimensional hydrodynamic focusing devices lead to lower detection signals. The current study focuses on achieving both small time scales of mixing and homogenous residence times. This is achieved by injecting sample through a center capillary and hydrodynamically focusing using a sheath flow within a tapered second capillary. The current design also features a third, larger coaxial capillary. The mixed stream flows into the large cross-section of this third capillary to decelerate and expand the stream by up to 14-fold to improve line-of-sight signal strength of reaction products. Hydrodynamic focusing, mixing, and expansion are studied using analytical and numerical models and also studied experimentally using a fluorescein-iodide quenching reaction. The experimentally validated models are used to explore trade-offs between mixing rate and uniformity. For the first time, this work presents detailed analysis of the Lagrangian time history of species transport during mixing inside coaxial capillaries to measure mixing nonuniformity. The mixing region enables order 100 μs mixing times and residence time widths of the same order (140 μs).

42 ENGINEERING↗

DOE OSTI2023

Constructing uniform oxygen defect engineering on primary particle level for high-stability lithium-rich cathode materials

Lithium-rich layered cathode materials are considered to be research focus of cathode candidates for next generation lithium-ion batteries due to their high specific capacity and low cost. However, lattice deoxidation associated with elemental migration and internal local shrinkage usually results in deteriorated cyclic performance and notorious voltage attenuation, severely limiting its application. In this paper, we have successfully injected uniform oxygen defects into surface region of Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 primary particles under the high-pressure and weak carbonate environment. Various experimental investigations indicate that the injected robust oxygen defects can not only mitigate detrimental interfacial reactions but also suppress unfavorable lattice variation and particle breakage. More importantly, theoretical calculations unravel the critical roles of oxygen defects in regulating energy band structure for strengthened anionic reversibility. Owing to stabilization effects of unique oxygen defect engineering, the modified Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 cathode has harvested dramatically enhanced electrochemical performance including a high initial coulombic efficiency of 96.6%, an outstanding capacity retention of 91.96% (1C, 200 cycles) and suppressed voltage decay of only 1.62 mV per cycle. Therefore, this facile and effective defect engineering strategy could establish new guidance for promoting practical application of Li-rich Mn-based cathode material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

An implicit, conservative and asymptotic-preserving electrostatic particle-in-cell algorithm for arbitrarily magnetized plasmas in uniform magnetic fields

Here, we introduce a new electrostatic particle-in-cell algorithm capable of using large timesteps compared to particle gyro-period under a uniform external magnetic field. The algorithm extends earlier electrostatic fully implicit PIC implementations with a new asymptotic-preserving particle-push scheme that allows timesteps much larger than particle gyroperiods. In the large-timestep limit, the integrator preserves all particle drifts, while recovering the full orbit for small timesteps. The scheme allows for a seamless, efficient treatment of particles with coexisting magnetized and unmagnetized species, and conserves energy and charge exactly without spoiling implicit solver performance. We demonstrate by numerical experiment with several problems of variable species magnetization (diocotron instability, modified two-stream instability, and drift instability) that orders of magnitude wall-clock-time speedups vs. the standard fully implicit electrostatic PIC algorithm are possible without sacrificing solution accuracy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Physical and thermal property changes under uniform oxidation in nuclear graphite

Material property changes of fine- and medium-grain nuclear graphite grades were measured after subjection to uniform oxidation. The cores of high temperature reactors are composed of large nuclear graphite block components. Here, these large core components are designed to provide neutron moderation and reflection, create a large thermal sink to assist in operational control, and form the solid core structure containing the nuclear fuel, coolant channels, and the safety critical channels for control rod insertion. Oxidation is a principle degradation mechanism affecting all aspects of the nuclear graphite component functions. This study addresses the underlying physical property changes of nuclear-graphite components for oxidized mass loss ranges beyond the current recommended ASME code rule limits to ensure structural integrity within the graphite components (a maximum mass loss = 10%).

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2023

Necessary and sufficient conditions for quadratic stabilizability of switched systems on non-uniform time domains

In this paper, we consider the quadratic stabilizability via state feedback for a particular class of switched systems that evolve on a non-uniform time domain by introducing time scales theory. The system considered switches between a continuous-time subsystem with variable lengths and a discrete-time subsystem with variable discrete step sizes. Necessary and sufficient conditions are derived to guarantee the quadratic stability of this class of switched systems via a switching state feedback law based on the existence of a common positive definite matrix satisfying the quadratic stabilizability condition by considering that the two subsystems are unstable. By state feedback, we mean that the switching among subsystems depends on the system states. Current results for this kind of state switching feedback control are derived only for switched systems evolving on a continuous time domain or a discrete time domain with fixed step’s size. These results are not applicable for the particular class of switched systems where there is a mixing between the continuous and discrete dynamics. This motivates the derivation of a new and more general state feedback control law for switched systems in this work. Here, a numerical example illustrating the results is presented.

42 ENGINEERING↗

DOE OSTI2023

Using 3D position sensitivity to reveal response non-uniformities in CdZnTe, TlBr, and CsPbBr 3 detectors

Position sensitivity enables the correction of response non-uniformities in room-temperature semiconductor detectors caused by crystal defects and other factors. It can also be used to pinpoint the exact location of crystal defects responsible for the response variations. This work describes a technique for revealing and visualizing the detector regions affecting the charge collection efficiency in CdZnTe (CZT), TlBr, and CsPbBr 3 detectors configured as position-sensitive virtual Frisch-grid (VFG) devices. The technique correlates the photopeak events in energy spectra with their spatial distributions inside the detectors using the position information. By selecting the events from narrow energy intervals within a photopeak, we can visualize the detector volumes with particular charge collection efficiencies, which, in turn, correlate with the locations of electrode and crystal defects. Here, we demonstrate this technique in several examples. Columnar structures in the volume plots (position distribution maps) are consistent with signal losses near or at the anode in selected samples of CZT and TlBr. Structures exhibiting a distinct depth dependence are consistent with grain boundaries or other crystal defects.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗