Search NASA⌕ Search

SEARCH · Search NASA

Results for “utility managed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Effects of Home Energy Management Systems on Distribution Utilities and Feeders Under Various Market Structures: Preprint

The combination of distributed energy resources (DER) and retail tariff structures to provide benefits to both utility consumers and the utilities is poorly understood. To improve understanding, an Integrated Energy System Model (IESM) is being developed to simulate the physical and economic aspects of DER technologies, the buildings where they reside, and feeders servicing them. The IESM was used to simulate 20 houses with home energy management systems on a single feeder under a time of use tariff to estimate economic and physical impacts on both the households and the distribution utilities. HEMS reduce consumers’ electric bills by precooling houses in the hours before peak electricity pricing. Household savings are greater than the reduction utility net revenue indicating that HEMS can provide a societal benefit providing tariffs are structured so that utilities remain solvent. Utilization of HEMS reduce peak loads during high price hours but shifts it to hours with off-peak and shoulder prices and resulting in a higher peak load.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Electric Utility Communications Standards Landscape 2025 Edition

Historically, challenges to managing electric utility data exchange have been addressed through dedicated communication solutions, enabling the transmission of data with both speed and security. Protocols have been deployed in a relatively uniform fashion; for example, field communications for Supervisory Control and Data Acquisition (SCADA) are commonly implemented using IEEE 1815 (DNP3).

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2015

Utility maximizing dynamic resource management in an oversubscribed energy-constrained heterogeneous computing system

The need for greater performance in high performance computing systems combined with rising costs of electricity to power these systems motivates the need for energy-efficient resource management. Driven by the requirements of the Extreme Scale Systems Center at Oak Ridge National Laboratory, our study addresses the problem of scheduling dynamically-arriving tasks to machines in an oversubscribed and energy-constrained heterogeneous distributed computing environment. Our goal is to maximize total “utility” earned by the system, where the utility of a task is defined by a monotonically-decreasing function that represents the value of completing that task at different times. To address this problem, we design four energy-aware resource allocation heuristics and compare their performance to heuristics from the literature. For our given energy-constrained environment, we also design an energy filtering technique that helps some heuristics regulate their energy consumption by allowing tasks to only consume up to an estimated fair-share of energy. Extensive sensitivity analyses of the heuristics in environments with different levels of heterogeneity show that heuristics with the ability to balance both energy consumption and utility exhibit the best performance because they save energy for use by future tasks.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Software defined grid energy storage

Today, consumer battery installations are isolated, physical devices. Virtual power plants (VPPs) allow consumer devices to aggregate for grid services, but they are are vertically integrated, vendor controlled systems (e.g., Tesla’s VPP). Consumer batteries are therefore unable to participate in energy markets or other grid services outside what their vendor provides. We describe a software system that provides software control of multiple, networked battery energy storage systems in the electric grid. The system introduces two new ideas that enable flexible and dependable management of energy storage. The first is a virtual battery, which can either partition a battery or aggregate multiple batteries. The second is a reservation-based API which allows asynchronous control of batteries to meet contractual guarantees in a safe and dependable manner. Virtual batteries and a reservation-based API address the unique challenges of achieving high and efficient utilization of energy storage systems, including heterogeneity of battery systems such as varying C-rates, participation in energy markets, utility bill management systems, community resource sharing, and reliability. Using a testbed comprised of sonnen Inc. storage units installed in several homes and a lab, we demonstrate that virtualized batteries can seamlessly replace physical batteries, flexibly manage energy storage resources, isolate multiple clients using a shared battery, and create new energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2014

Zonetool

Zonetool is a utility for managing signed DNS zones and managing DNSSEC keys. It maintains the state of managed DNS zones and uses the BIND utilities to actually perform key generation, zone signing, and validation. DNS administrators will use Zonetool to initially deploy and further maintain a signed DNS zone.

Deccio, Casey↗
DOE OSTI2016

Aggregate modeling of fast-acting demand response and control under real-time pricing

This paper develops and assesses the performance of a short-term demand response (DR) model for utility load control with applications to resource planning and control design. Long term response models tend to underestimate short-term demand response when induced by prices. This has two important consequences. First, planning studies tend to undervalue DR and often overlook its benefits in utility demand management program development. Second, when DR is not overlooked, the open-loop DR control gain estimate may be too low. This can result in overuse of load resources, control instability and excessive price volatility. Our objective is therefore to develop a more accurate and better performing short-term demand response model. We construct the model from first principles about the nature of thermostatic load control and show that the resulting formulation corresponds exactly to the Random Utility Model employed in economics to study consumer choice. The model is tested against empirical data collected from field demonstration projects and is shown to perform better than alternative models commonly used to forecast demand in normal operating conditions. The results suggest that (1) existing utility tariffs appear to be inadequate to incentivize demand response, particularly in the presence of high renewables, and (2) existing load control systems run the risk of becoming unstable if utilities close the loop on real-time prices.

Aggregate Modeling↗
NASA NTRS1973

A Multidisciplinary Survey for the Management of Alaskan Resources Utilizing ERTS Imagery

The application of ERTS-1 imagery for a multidisciplinary study of Alaskan resources is discussed. ERTS-1 data form a politically neutral base from which resource surveys can be made without arousing suspicions from groups which have mutually confliciting goals. The specific use of ERTS-1 imagery for monitoring migratory animals, pipeline locations, road construction, snow cover, and vegetation growth is reported. Maps, illustrations, and photographs are provided to support the data.

Miller, J. M.↗
DOE OSTI2025

Exploiting Kubernetes to Simplify the Deployment and Management of the Multi-purpose CMS Pilot Job Factory

GlideinWMS, a widely utilized workload management system in high-energy physics (HEP) research, serves as the backbone for efficient job provisioning across distributed computing resources. It is utilized by various experiments and organizations, including CMS, OSG, Dune, and FIFE, to create HTCondor pools as large as 600k cores. In particular, a shared factory service historically deployed at UCSD has been configured to interface with more than 500 routes to compute clusters. As part of our team’s initiative to modernize infrastructure and enhance scalability, we undertook the migration of the GlideinWMS factory service into the Kubernetes environment. Leveraging the flexibility and orchestration capabilities of Kubernetes, we successfully deployed the factory service within the OSG Tiger Kubernetes cluster. The major benefits Kubernetes gives us is it streamlines the management and monitoring of the factory infrastructure, and improves fault tolerance through its resilient deployment strategies. Through this case study, we aim to share insights, challenges, and best practices encountered during the migration process. Our experience underscores the benefits of embracing containerization and Kubernetes orchestration for HEP computing infrastructure, paving the way for scalability and resilience in distributed computing environments.

Dost, Jeffrey Michael [UC, San Diego (main)]↗
DOE OSTI2020

Optimal Energy Dispatch of Distributed PVs for the Next Generation of Distribution Management Systems

Advanced Distribution Management Systems (ADMS) are being widely adopted by electric utilities for managing and optimizing the operations of their distribution systems. Distributed photovoltaic (DPV) systems with smart inverters can be controlled to adjust active power and reactive power outputs, and they are envisioned to become a part of (centrally or distributed) controllable assets managed by the ADMS for optimizing grid operations. This paper proposes an optimal energy dispatch strategy controlling DPV systems for regulating distribution voltages and achieving conservation voltage reduction. A convex optimization model is proposed with the use of linearized power flow, and the gradient projection algorithm is used to solve the optimal active power and reactive power outputs of smart inverters. The proposed optimal energy dispatch is implemented using an open-source ADMS platform, and simulation results have demonstrated the effectiveness of the proposed approach on improving distribution grid operations.

42 ENGINEERING↗
DOE OSTI2022

NREL's Advanced Distribution Management System (ADMS) Test Bed

Transform utility electric distribution management systems to enable the integration and management of all assets and functions across the utility enterprise regardless of vendor or technology. Four program areas: Platform: Develop an open-source platform; evaluate advanced applications. Test bed: Build a vendor-neutral test bed to evaluate existing and future advanced distribution management system (ADMS) functionalities in a realistic setting. Applications: Develop an initial suite of ADMS applications. Advanced control: Develop new integrated optimization and control solutions.

ADMS test bed↗
DOE OSTI2021

Peak Load Management in Distribution Systems Using Legacy Utility Equipment and Distributed Energy Resources

The ability to perform peak load management in distribution systems has several benefits for utilities, including reduced demand charges and improved reliability, efficiency, and utilization of the network infrastructure. This paper demonstrates the coordinated operation of an advanced distribution management system (ADMS) and a distributed energy resource management system (DERMS) to achieve peak load management using a realistic laboratory test bed. A commercial ADMS reduces the peak demand by reducing system voltages using a dynamic voltage regulation (DVR) application. A prototype DERMS-based on real-time optimal power flow-controls distributed battery energy storage systems to further reduce the feeder power. Results from the experiments conducted using a model of a real distribution feeder show that the coordinated operation of the ADMS and DERMS is effective in accomplishing peak load management.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗