Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A comparative assessment of R. M. Young and tipping bucket rain gauges

Rain rates as derived from standard tipping bucket rain gauges have variable integration times corresponding to the interval between bucket tips. For example, the integration time for the Weathertronics rain gauge is given by delta(T) = 15.24/R (min), where R is the rain rate expressed in mm/h and delta(T) is the time between tips expressed in minutes. It is apparent that a rain rate of 1 mm/h has an integration time in excess of 15 minutes. Rain rates larger than 15.24 mm/h will have integration times smaller than 1 minute. The integration time is dictated by the time it takes to fill a small tipping bucket where each tip gives rise to 0.254 mm of rainfall. Hence, a uniform rain rate of 1 mm/h over a 15 minute period will give rise to the same rain rate as 0 mm/h rainfall over the first 14 minutes and 15 mm/h between 14 to 15 minutes from the reference tip. Hence, the rain intensity fluctuations may not be captured with the tipping bucket rain gauge for highly variable rates encompassing lower and higher values over a given integration time. The objective of this effort is to provide an assessment of the features of the R. M. Young capacitive gauge and to compare these features with those of the standard tipping bucket rain gauge. A number of rain rate-time series derived from measurements with approximately co-located gauges are examined.

Goldhirsh, Julius↗

Data Analysis for Explosive Firesets [Poster]

I analyzed the data from various detonators at different initial voltages to find the RLC values (resistance, inductance, capacitance) of the fireset. The data I was given contained a current and voltage for each time value taken on nanosecond intervals. From this, I was able to make plots of several variables to try and find which if any of variables correlated with a burst or a go. These results will allow us to fully understand what is required to achieve a burst in the bridgewire so that we can know what is safe or what will never cause detonation. We may also be able to predict the outcome of using the same fireset with different detonators or with different sizes or materials of bridgewire.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

A Systems Approach to Increasing Carbon Flux to Seed Oil for Biofuels and Bioproducts Production in Camelina sativa (Final Report)

To combat climate change and alleviate the dependency of the United States on fossil fuels, the transition to biofuel crops has long been proposed as a crucial part of the long-term solution. Camelina sativa has emerged as one of the leading commercially viable options for biofuel and bioproduct production for the U.S. Camelina has the advantages of low agronomic inputs and natural resistance to diverse biotic and abiotic stresses relative to other oilseed crops, and Camelina oil-based blends have been tested and approved as liquid transportation fuels. A major limitation in the widespread adoption of Camelina as a viable industrial oilseed crop is its modest oil yields. This project directly investigated possible paths towards increasing oil, by employing tissue-specific and whole plant systems approaches to identify major regulatory bottlenecks. We developed a new high-throughput method for the identification of multi-gene transformants in polyploid species like Camelina sativa and used this to determine that, contrary to what mathematical models suggested, introduction of the microbial Entner-Doudoroff (ED) pathway into Camelina sativa did not result in significant seed oil increases. We developed flux maps providing accurate and statistically robust models of central carbon metabolism in Camelina, including of cultured Camelina embryos. This knowledge was used in the capacitation of a number of junior researchers in gaining knowledge on approaches used for quantitative flux map analyses. We identified several novel Camelina transcription factor genes regulating fatty acid biosynthesis that showed variable effects on seed oil accumulation in transgenic plants. Among a number of community resources, we also developed a knowledge base web resource (CamRegBase) to integrate Camelina gene regulatory information. Together, research outcomes from this project have contributed to a much better understanding of the regulation and bottlenecks to engineer seed oil production in Camelina.

09 BIOMASS FUELS↗

High-frequency measurements of multilayer ceramic capacitors

A resonant coaxial transmission line, short circuited at one end and open circuited at the other, whose fundamental resonant frequency and Q factor are known, is perturbed with a test capacitor connected either in series at the shorted end of the line, or in shunt at the open end. Measuring the Q factor of the system with the delta f technique yields the effective series resistance, capacitance, and the Q factor of the test specimen. This method of measurement has the advantage that there are no adjustable elements to alter circuit conditions in an unprescribed way, the only variable is the frequency which can be measured with an uncertainty of less than 1 ppm, the loss of the line as a function of frequency is quite predictable, and the Q factor of the line can be made sufficiently high to support accurate measurements of low loss capacitors.

Lafferty, R. E.↗

Effect of the resonant growth of harmonics on the electron density in capacitively coupled plasma

The growth of harmonics is known to occur under the condition of plasma series resonance (PSR). In an actual plasma process chamber, the external circuit also affects the PSR. We experimentally demonstrated the resonant growth of the third and fourth harmonics by tuning a variable capacitor attached to the electrode, and investigated the influence of the growth on the electron density. We observed significant increases in electron density as the amplitude of harmonics grows. The result clearly shows that nonlinear electron resonance heating actually takes place.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Lunar Seismic Detector to Advance the Search for Strange Quark Matter

Detection of small seismic signals on the Moon are needed to study lunar internal structure and to detect possible signals from Strange Quark m&er transit events. The immediate objective is to create a prototype seismic detector using a tunnel diode oscillator with a variable capacitor attached to a proof mass. The device is designed to operate effectively on the Moon, which requires a low power consumption to operate through lunar night, while preserving sensitivity. The goal is capacitance resolution of better than 1 part in 10' and power consumption of less than 1 watt.

Galitzki, Nicholas B.↗

Study of the Design and Characteristics of a Modified Pulsed Plasma Thruster with Graphite and Tungsten Trigger Electrodes

The paper presents experimental results for a modified pulsed plasma thruster (PPT) with solid propellant, using a coaxial anode–cathode design. Graphite from pencil leads served as propellant, and a tungsten trigger electrode was tested to reduce carbonization effects. Experiments were performed in a vacuum chamber at 0.001 Pa, employing diagnostics such as discharge current/voltage recording, power measurement, ballistic pendulum, time-of-flight (TOF) method, and a Faraday cup. Current and voltage waveforms matched an oscillatory RLC circuit with variable plasma channel resistance. Key discharge parameters were measured, including current pulse duration/amplitude and plasma channel formation/decay dynamics. Impulse bit values, obtained with a ballistic pendulum, reached up to 8.5 μN·s. Increasing trigger capacitor capacitance reduced thrust due to unstable “pre-plasma” formation and partial pre-discharge energy loss. Using TOF and Faraday cup diagnostics, plasma front velocity, ion current amplitude, current density, and ion concentration were determined. Tungsten electrodes produced lower charged particle concentrations than graphite but offered better adhesion resistance, minimal carbonization, and stable long-term performance. The findings support optimizing trigger electrode materials and PPT operating modes to extend lifetime and stabilize thrust output.

Faraday cup↗

Performance analysis and comparison of data-driven models for predicting indoor temperature in multi-zone commercial buildings

Building thermal models, which characterize the properties of a building’s envelope and thermal mass, are essential for accurate indoor temperature and cooling/heating demand prediction. Because of their flexibility and ease of use, data-driven models are increasingly used. Here, this study compared and analyzed the performance of gray-box (resistance-capacitance) and black-box (recurrent neural network) models for predicting indoor air temperature in a real multi-zone commercial building. The developed resistance-capacitance model served as a benchmark model for which full sets of temporal data and building information were used as inputs. The recurrent neural network models were trained and tested assuming various available types and amounts of temporal data and known building physical information to investigate the effects of data and information availability. Feature importance analysis was conducted to select the key variables for different prediction targets under different scenarios. This research provides guidance in selecting an appropriate building thermal response modeling method based on the measured data availability, building physical information, and application.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Ultra-High-Frequency Capacitive Displacement Sensor

Improved class of compact, high-resolution capacitive displacement sensors operates at excitation frequency of 915 MHz and measures about 7.5 by 4 by 2 centimeters. Contains commercially available 915-MHz oscillator and transmission-line resonator. Resonator contains stripline inductor in addition to variable capacitor. Ultrahigh excitation frequency offers advantages of resolution and frequency response. Not deleteriously affected by mechanical overdriving, or contact between electrodes.

Vanzandt, Thomas R.↗

Coordination and Control of Flexible Building Loads for Renewable Integration; Demonstrations using VOLTTRON

Renewable energy resources such as wind and solar power have a high degree of uncertainty. Large-scale integration of these variable generation sources into the grid is a big challenge for power system operators. Buildings, in which we live and work, consume about 75% of the total electricity in the United States. They also have a large capacity of power flexibility due to their massive thermal capacitance. Therefore, they present a great opportunity to help the grid to manage power balance. In this report, we study coordination and control of flexible building loads for renewable integration. We first present the motivation and background, and conduct a literature review on building-to-grid integration. We also compile a catalog of flexible building loads that have great potential for renewable integration, and discuss their characteristics. We next collect solar generation data from a photovoltaic panel on Pacific Northwest National Laboratory campus, and conduct data analysis to study their characteristics. We find that solar generation output has a strong uncertainty, and the uncertainty occurs at almost all time scales. Additional data from other sources are also used to verify our study. We propose two transactive coordination strategies to manage flexible building loads for renewable integration. We prove the theories that support the two transactive coordination strategies and discuss their pros and cons. In this report, we select three types of flexible building loads—air-handling unit, rooftop unit, and a population of WHs—for which we demonstrate control of the flexible load to track a dispatch signal (e.g., renewable generation fluctuation) using experiment, simulation, or hardware-in-the-loop study. More specifically, we present the system description, model identification, controller design, test bed setup, and experiment results for each demonstration. We show that coordination and control of flexible loads has a great potential to integrate variable generation sources. The flexible loads can successfully track a power dispatch signal from the coordinator, while having little impact on the quality of service to the end-users.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Application of the macrohomogeneous line model for the characterization of carbon aerogel electrodes in capacitive deionization

Capacitive deionization (CDI) is a conceivable alternative desalination technology. Among the carbon materials studied as the deionizing electrode, carbon aerogels are a promising material due to their high surface area, structural designability and low resistivity. When evaluating carbons for CDI, their electrochemical properties are a crucial variable making the characterization of such properties vital. We apply a macrohomogenous model to evaluate carbon aerogels activated with CO 2 for various periods and varying Resorcinol/Catalyst, R/C, ratios during synthesis for estimation of their effective surface areas and pore sizes from an electrochemical standpoint. The porosities and structural properties of carbon aerogels were evaluated by nitrogen porosimetry, STEM, SEM and Electrochemical Impedance Spectroscopy (EIS). Results showed that the effective electrochemical surface areas calculated from the EIS were a small fraction of the areas estimated by nitrogen porosimetry, indicating that primarily the mesoporosity was utilized for deionization. Characteristic pore sizes calculated by the model were also close to the mesopore sizes estimated by the nitrogen adsorption isotherms, STEM and SEM measurements. Such results demonstrate the validity and value of the macrohomogenous model for evaluating effective electrochemical properties important for CDI applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epidermal Impedance Sensing Sheets for Precision Hydration Assessment and Spatial Mapping

This paper presents a class of hydration monitor that uses ultrathin, stretchable sheets with arrays of embedded impedance sensors for precise measurement and spatially multiplexed mapping. The devices contain miniaturized capacitive electrodes arranged in a matrix format, capable of integration with skin in a conformal, intimate manner due to the overall skin-like physical properties. These “epidermal” systems noninvasively quantify regional variations in skin hydration, at uniform or variable skin depths. Experimental results demonstrate that the devices possess excellent uniformity, with favorable precision and accuracy. Theoretical models capture the underlying physics of the measurement and enable quantitative interpretation of the experimental results. Furthermore, these devices are appealing for applications ranging from skin care and dermatology, to cosmetology and health/wellness monitoring, with the additional potential for combined use with other classes of sensors for comprehensive, quantitative physiological assessment via the skin.

42 ENGINEERING↗

Transient analysis and energy optimization of solar heating and cooling systems in various configurations

In this paper, a transient simulation model of solar-assisted heating and cooling systems (SHC) is presented. A detailed case study is also discussed, in which three different configurations are considered. In all cases, the SHC system is based on the coupling of evacuated solar collectors with a single-stage LiBr-H{sub 2}O absorption chiller, and a gas-fired boiler is also included for auxiliary heating, only during the winter season. In the first configuration, the cooling capacity of the absorption chiller and the solar collector area are designed on the basis of the maximum cooling load, and an electric chiller is used as the auxiliary cooling system. The second layout is similar to the first one, but, in this case, the absorption chiller and the solar collector area are sized in order to balance only a fraction of the maximum cooling load. Finally, in the third configuration, there is no electric chiller, and the auxiliary gas-fired boiler is also used in summer to feed the absorption chiller, in case of scarce solar irradiation. The simulation model was developed using the TRNSYS software, and included the analysis of the dynamic behaviour of the building in which the SHC systems were supposed to be installed. The building was simulated using a single-lumped capacitance model. An economic model was also developed, in order to assess the operating and capital costs of the systems under analysis. Furthermore, a mixed heuristic-deterministic optimization algorithm was implemented, in order to determine the set of the synthesis/design variables that maximize the energy efficiency of each configuration under analysis. The results of the case study were analyzed on monthly and weekly basis, paying special attention to the energy and monetary flows of the standard and optimized configurations. The results are encouraging as for the potential of energy saving. On the contrary, the SHC systems appear still far from the economic profitability: however, this is notoriously true for the great majority of renewable energy systems. (author)

14 SOLAR ENERGY↗

Optimization principles and the figure of merit for triboelectric generators

Energy harvesting with triboelectric nanogenerators is a burgeoning field, with a growing portfolio of creative application schemes attracting much interest. Although power generation capabilities and its optimization are one of the most important subjects, a satisfactory elemental model that illustrates the basic principles and sets the optimization guideline remains elusive. We use a simple model to clarify how the energy generation mechanism is electrostatic induction but with a time-varying character that makes the optimal matching for power generation more restrictive. By combining multiple parameters into dimensionless variables, we pinpoint the optimum condition with only two independent parameters, leading to predictions of the maximum limit of power density, which allows us to derive the triboelectric material and device figure of merit. We reveal the importance of optimizing device capacitance, not only load resistance, and minimizing the impact of parasitic capacitance. Optimized capacitances can lead to an overall increase in power density of more than 10 times.

36 MATERIALS SCIENCE↗

Effects of macroparticle weighting in axisymmetric particle-in-cell Monte Carlo collision simulations

In this paper, the effects of macroparticle (MP) weighting on the plasma discharge, particularly near the centerline, are investigated using a two-dimensional axisymmetric particle-in-cell Monte Carlo collision (PIC/MCC) model. A variable MP weight according to the radial position of the MPs is employed to maintain sufficient number of MPs near the centerline of the plasma source. Finally, the plasma density obtained from the PIC/MCC simulations for low-pressure (25–100 mTorr) capacitively coupled plasmas is found to be artificially large when the MP weight near the centerline is not well resolved, demonstrating the need for particle convergence studies for axisymmetric PIC/MCC simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characteristics Of A Dielectric Barrier Discharge In Atmospheric Air

Parallel plate dielectric barrier discharges consisting of two electrodes with glass (epsilon{sub r} = 7.5) and alumina (epsilon{sub r} = 9.0) as the dielectric barrier were constructed. The system is powered by a variable 20 kV high voltage supply which is capable of delivering unipolar voltage pulses at frequency of 0.1-2.5 kHz and sinusoidal voltages at 6.5 kHz and above. At atmospheric pressure, the discharges exhibit either diffuse or filamentary appearance depending on parameters which include the series capacitance established by the electrodes with the dielectric barrier and varying air gap, dielectric material, and frequency of the supply voltages. This DBD system is built for the study of bacterial sterilization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of the Variable Emittance Thermal Suite for the Space Technology 5 Microsatellite

The advent of very small satellites, such as nano and microsatellites, logically leads to a requirement for smaller thermal control subsystems. In addition, the thermal control needs of the smaller spacecraft/instrument may well be different from more traditional situations. For example, power for traditional heaters may be very limited or unavailable, mass allocations may be severely limited, and fleets of nano/microsatellites will require a generic thermal design as the cost of unique designs will be prohibitive. Some applications may require significantly increased power levels while others may require extremely low heat loss for extended periods. Small spacecraft will have low thermal capacitance thus subjecting them to large temperature swings when either the heat generation rate changes or the thermal sink temperature changes. This situation, combined with the need for tighter temperature control, will present a challenging situation during transient operation. The use of "off-the-shelf" commercial spacecraft buses for science instruments will also present challenges. Older thermal technology, such as heaters, thermostats, and heat pipes, will almost certainly not be sufficient to meet the requirements of these new spacecraft/instruments. They are generally too heavy, not scalable to very small sizes, and may consume inordinate amounts of power. Hence there is a strong driver to develop new technology to meet these emerging needs. Variable emittance coatings offer an exciting alternative to traditional control methodologies and are one of the technologies that will be flown on Space Technology 5, a mission of three microsatellites designed to validate "enabling" technologies. Several studies have identified variable emittance coatings as applicable to a wide range of spacecraft, and to potentially offer substantial savings in mass and/or power over traditional approaches. This paper discusses the development of the variable emittance thermal suite for ST-5. More specifically, it provides a description of and the infusion and validation plans for the variable emittance coatings.

Douglas, Donya M.↗

Capacitated p -hub approach for park-and-ride facility location problem under nested logit demand function: polyhedral approaches

By generalizing the unconstrained p-hub approach for the park-and-ride (P&R) facility location problem under the multinomial logit demand function, the capacitated p-hub approach for the problem under the nested logit demand function captures a broader range of real-world cases. To solve this problem optimally, we introduce a mixed-integer linear program and accelerate its solution by enhancing the branch-and-cut procedure. To address the problem at a large scale, we introduce two other polyhedral approaches: variable neighborhood search (VNS) and adaptive randomized rounding (ARR). Downtown areas in Seoul have a high modal share of public transportation and congested road traffic, yet P&R has not been widely implemented. Therefore, we apply the ARR procedure to solve a real-world problem using traffic and geographic data from the Seoul metropolitan area. ARR performs better than VNS and addresses real-world cases. The solutions obtained by ARR present a phased expansion plan that encourages policymakers to start installing a small number of P&Rs immediately.

Capacitated p-hub approach↗