Search NASA⌕ Search

SEARCH · Search NASA

Results for “vector fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Full potential methods for analysis/design of complex aerospace configurations

The steady form of the full potential equation, in conservative form, is employed to analyze and design a wide variety of complex aerodynamic shapes. The nonlinear method is based on the theory of characteristic signal propagation coupled with novel flux biasing concepts and body-fitted mapping procedures. The resulting codes are vectorized for the CRAY XMP and the VPS-32 supercomputers. Use of the full potential nonlinear theory is demonstrated for a single-point supersonic wing design and a multipoint design for transonic maneuver/supersonic cruise/maneuver conditions. Achievement of high aerodynamic efficiency through numerical design is verified by wind tunnel tests. Other studies reported include analyses of a canard/wing/nacelle fighter geometry.

Shankar, Vijaya↗

The NASA OBPG 2020 On-Orbit Calibration of SNPP VIIRS for Ocean Color Applications

The NASA Ocean Biology Processing Group (OBPG) has continued monitoring the SNPP VIIRS on-orbit calibration for bands M1-M11 over its mission to optimize the calibration for ocean color applications. The OBPG has recently implemented several changes to the calibration scheme: using solar-derived f-factors to detrend the lunar observations; using long-term exponentials of time as basis vectors (along with libration angles) for radiometric fits to any resulting lunar temporal drifts; deriving gain adjustments to the solar f-factors from these exponentials; and deriving gain adjustments due to modulated RSRs outside of the solar/lunar calibration using TOA reference spectra. These calibration changes minimize the impact of uncertainties in any one component of the calibration on the derived f-factors. The final f-factors incorporate VIIRS solar diffuser measurements, h-factor BRDF corrections, lunar-derived gains, and modulated RSR gains. The combined BRDF corrections, lunar gain adjustments, and mRSR gain adjustments define effective h-factors for each band. The improvements in the on-orbit calibration are validated by evaluation of globally-derived anomaly plots of remote sensing reflectance for the ocean color bands. The ultimate goal of the OBPG calibration effort is incorporation of a consistent SNPP VIIRS ocean color data set into the NASA multi-mission ocean color climate data record.

VIIRS↗

Combined effective field theory interpretation of Higgs boson, electroweak vector boson, top quark, and multijet measurements

Constraints on Wilson coefficients (WCs) corresponding to dimension-6 operators of the standard model effective field theory (SMEFT) are determined from a simultaneous fit to seven sets of CMS measurements probing Higgs boson, electroweak vector boson, top quark, and multijet production. Measurements of electroweak precision observables are also included and provide complementary constraints to those from the CMS experiment. The CMS measurements, using LHC proton-proton collision data at $\sqrt{s}=13\,\text {Te}\text {V} $, corresponding to integrated luminosities of 36.3 or 138$\,\text {fb}^{-1}$, are chosen to provide sensitivity to a broad set of operators, for which consistent SMEFT predictions can be derived. These are primarily measurements of differential cross sections which are parameterized as functions of the WCs. In measurements targeting ${\text {t}} (\bar{\textrm{t}})\text {X} $ production, SMEFT effects are modelled at the detector level. Individual constraints on 64 WCs, and constraints on 43 linear combinations of WCs, are obtained.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Adjoint Methods for Adjusting Three-Dimensional Atmosphere and Surface Properties to Fit Multi-Angle Multi-Pixel Polarimetric Measurements

This paper derives an efficient procedure for using the three-dimensional (3D) vector radiative transfer equation (VRTE) to adjust atmosphere and surface properties and improve their fit with multi-angle/multi-pixel radiometric and polarimetric measurements of scattered sunlight. The proposed adjoint method uses the 3D VRTE to compute the measurement misfit function and the adjoint 3D VRTE to compute its gradient with respect to all unknown parameters. In the remote sensing problems of interest, the scalar-valued misfit function quantifies agreement with data as a function of atmosphere and surface properties, and its gradient guides the search through this parameter space. Remote sensing of the atmosphere and surface in a three-dimensional region may require thousands of unknown parameters and millions of data points. Many approaches would require calls to the 3D VRTE solver in proportion to the number of unknown parameters or measurements. To avoid this issue of scale, we focus on computing the gradient of the misfit function as an alternative to the Jacobian of the measurement operator. The resulting adjoint method provides a way to adjust 3D atmosphere and surface properties with only two calls to the 3D VRTE solver for each spectral channel, regardless of the number of retrieval parameters, measurement view angles or pixels. This gives a procedure for adjusting atmosphere and surface parameters that will scale to the large problems of 3D remote sensing. For certain types of multi-angle/multi-pixel polarimetric measurements, this encourages the development of a new class of three-dimensional retrieval algorithms with more flexible parametrizations of spatial heterogeneity, less reliance on data screening procedures, and improved coverage in terms of the resolved physical processes in the Earth׳s atmosphere.

adjoint methods↗

Robust Recovery of Temporally Smooth Signals From Under-Determined Multiple Measurements

In this study, we consider the problem of recovering jointly sparse vectors from underdetermined measurements that are corrupted by both additive noise and outliers. This can be viewed as the robust extension of the Multiple Measurement Vector (MMV) problem. To solve this problem, we propose two general approaches. As a benchmark, the first approach preprocesses the input for outlier removal and then employs state-of-the-art technologies for signal recovery. The second approach, as the main contribution of this paper, is based on formulation of an innovative regularized fitting problem. By solving the regularized fitting problem, we jointly remove outliers and recover the sparse vectors. Furthermore, by exploiting temporal smoothness among the sparse vectors, we improve noise robustness of the proposed approach and avoid the problem of over-fitting. Extensive numerical results are provided to illustrate the excellent performance of the proposed approach.

47 OTHER INSTRUMENTATION↗

Field-theoretic parametrization of low-energy nucleon form factors

A field-theoretic parametrization is proposed for nucleon electromagnetic form factors at momentum transfer less than 600 MeV. The parametrization is part of a larger effective field theory Lagrangian that is Lorentz covariant and chirally symmetric and that has been used to successfully describe bulk and single-particle properties of medium- to heavy-mass nuclei. The parametrization is based on vector meson dominance and a derivative expansion of nucleon couplings to the electromagnetic fields. At lowest order in the expansion, it is possible to fit all four parameters to modern data on the rms radii of the nucleon form factors. At next-to-leading order it is possible to fit the form factors to within a few percent up to momentum transfers of 600 MeV. The vector meson dominance contributions are crucial in this fit, because a simple expansion in powers of momentum transfer would require many terms to achieve comparable accuracy. The ability to fit single-nucleon form factors up to 600 MeV momentum transfer makes possible the study of two-body electromagnetic exchange currents within this effective field theory framework.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Flavor structure of supersymmetric SO(10) GUTs with extended matter sector

We discuss in detail the flavor structure of the supersymmetric SO(10) grand unified models with the three traditional 16-dimensional matter spinors mixed with a set of extra ten-dimensional vector multiplets which can provide the desired sensitivity of the standard model matter spectrum to the grand unified theory symmetry breakdown at the renormalizable level. We put the qualitative argument that a successful fit of the quark and lepton data requires an active participation of more than a single vector matter multiplet on a firm, quantitative ground. We find that the strict no-go obtained for the fits of the charged-sector observables in case of a single active matter 10 is relaxed if a second vector multiplet is added to the matter sector and excellent, though nontrivial, fits can be devised. Exploiting the unique calculable part of the neutrino mass matrix governed by the SU(2){sub L} triplet in the 54-dimensional Higgs multiplet, a pair of genuine predictions of the current setting is identified: a nonzero value of the leptonic 1-3 mixing close to the current 90% C.L. limit and a small leptonic Dirac CP phase are strongly preferred by all solutions with the global-fit {chi}{sup 2} values below 50.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Geometric phase for collinear conical intersections. I. Geometric phase angle and vector potentials

We present a method for properly treating collinear conical intersections in triatomic systems. The general vector potential (gauge theory) approach for including the geometric phase effects associated with collinear conical intersections in hyperspherical coordinates is presented. The current study develops an introductory method in the treatment of collinear conical intersections by using the phase angle method. The geometric phase angle, {eta}, in terms of purely internal coordinates is derived using the example of a spin-aligned quartet lithium triatomic system. A numerical fit and thus an analytical form for the associated vector potentials are explicitly derived for this triatomic A{sub 3} system. The application of this methodology to AB{sub 2} and ABC systems is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A fan beam model for radio pulsars. I. Observational evidence

We propose a novel beam model for radio pulsars based on the scenario that the broadband and coherent emission from secondary relativistic particles, as they move along a flux tube in a dipolar magnetic field, form a radially extended sub-beam with unique properties. The whole radio beam may consist of several sub-beams, forming a fan-shaped pattern. When only one or a few flux tubes are active, the fan beam becomes very patchy. This model differs essentially from the conal beam models with respect to the beam structure and predictions on the relationship between pulse width and impact angle β (the angle between the line of sight and the magnetic pole) and the relationship between emission intensity and beam angular radius. The evidence for this model comes from the observed patchy beams of precessional binary pulsars and three statistical relationships found for a sample of 64 pulsars, of which β were mostly constrained by fitting polarization position angle data with the rotation vector model. With appropriate assumptions, the fan beam model can reproduce the relationship between 10% peak pulse width and |β|, the anticorrelation between the emission intensity and |β|, and the upper boundary line in the scatter plot of |β| versus pulsar distance. An extremely patchy beam model with the assumption of narrowband emission from one or a few flux tubes is studied and found unlikely to be a general model. The implications of the fan beam model for the studies on radio and gamma-ray pulsar populations and radio polarization are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of 7 TeV and 8 TeV, corresponding to an integrated luminosity of about 25 fb-1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Geometric accuracy assessment of Landsat-4 Thematic Mapper p-tapes

An analysis was performed on the P-format computer compatible tapes for the Landsat-4 Thematic Mapper (TM) scene 40109-15140 acquired November 2, 1982 over Washington, D.C. and environs. Three tests of sensor geometry were undertaken: (1) band-to-band registration, (2) line-to-line registration between swaths, and (3) geometric correction of sensor and spacecraft/ephemeris characteristics. The band-to-band and line-to-line registration was measured at one hundred pixel spacings along a line using the phase correlation image alignment method developed by Kuglin and Hines and adapted to a one-dimensional FFT correlation technique. The sensor and spacecraft geometric calibration analysis was checked by identifying 75 ground control points in the TM scene and on 1:24,000 topographic maps. A least squares fit of the gaps was computed and the vector offsets of the residuals was tabulated and plotted.

Bryant, N. A.↗

Strong decays of radially excited mesons in a chiral approach

We study radial excitations of pseudoscalar and vector qq mesons within a chiral approach. We derive a general form for a chiral Lagrangian describing processes involving excited pseudoscalar and vector mesons. The parameters of the chiral Lagrangian are fitted using data and previous calculations in the framework of the {sup 3}P{sub 0} model. Finite-width effects are examined and predictions for mesons previously not discussed are given. Available experimental data is analyzed whenever possible. Possible hints for exotic mesons and open interpretation issues are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Drug Resistance in Filarial Parasites Does Not Affect Mosquito Vectorial Capacity

Parasite drug resistance presents a major obstacle to controlling and eliminating vector-borne diseases affecting humans and animals. While vector-borne disease dynamics are affected by factors related to parasite, vertebrate host and vector, research on drug resistance in filarial parasites has primarily focused on the parasite and vertebrate host, rather than the mosquito. However, we expect that the physiological costs associated with drug resistance would reduce the fitness of drug-resistant vs. drug-susceptible parasites in the mosquito wherein parasites are not exposed to drugs. Here we test this hypothesis using four isolates of the dog heartworm (Dirofilaria immitis)—two drug susceptible and two drug resistant—and two vectors—the yellow fever mosquito (Aedes aegypti) and the Asian tiger mosquito (Ae. albopictus)—as our model system. Our data indicated that while vector species had a significant effect on vectorial capacity, there was no significant difference in the vectorial capacity of mosquitoes infected with drug-resistant vs. drug-susceptible parasites. Consequently, contrary to expectations, our data indicate that drug resistance in D. immitis does not appear to reduce the transmission efficiency of these parasites, and thus the spread of drug-resistant parasites in the vertebrate population is unlikely to be mitigated by reduced fitness in the mosquito vector.

59 BASIC BIOLOGICAL SCIENCES↗

Measurement of the $M_A^{QE}$ parameter using multiple quasi-elastic dominated sub-samples in the minos near detector

The Main Injector Neutrino Oscillation Search (MINOS) is a two detector, long baseline neutrino oscillation experiment. The MINOS near detector is an ironscintillator tracking/sampling calorimeter and has recorded the world’s largest data set of neutrino interactions in the 0-5 GeV region. This high statistics data set is used to make precision measurements of neutrino interaction cross-sections on iron. The Q 2 dependence in charged current quasi-elastic (CCQE) scattering probes the axial and vector structure (form factor) of the nucleon/nuclear target, and nuclear effects in neutrino scattering. Presented here is a study of the MINOS Data that will introduce a method that improves the existing MINOS CCQE analysis. This analysis uses an additional CCQE dominated sub-sample from a different kinematic region to reduce correlations between fit parameters in the existing MINOS CCQE analysis. The measured value of the axial-vector mass is M QE A = 1.312 +0.037 -0.038 (fit) +0.123 -0.265 (syst.) GeV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Neutrino neutral-current elastic scattering on {sup 12}C

The neutral-current elastic scattering of neutrinos on carbon and CH{sub 2} targets is computed using the relativistic distorted-wave impulse approximation with a relativistic optical potential. Results for exclusive and inclusive neutrino reactions on a {sup 12}C target are presented. We show that the nuclear effects on the shape of the four-momentum transferred squared distribution d{sigma}/dQ{sub QE}{sup 2} in neutrino neutral-current and charged-current quasielastic scattering are similar. We also calculate the flux-averaged neutral-current elastic differential cross section d{sigma}/dQ{sub QE}{sup 2} for neutrino scattering from CH{sub 2}, as well as the neutral-current to charged-current cross section ratio as functions of Q{sub QE}{sup 2}. The axial mass M{sub A} is extracted from a fit of the d{sigma}/dQ{sub QE}{sup 2} cross section measured in the MiniBooNE experiment. The extracted value of M{sub A}=1.28{+-}0.05 GeV is consistent within errors with the MiniBooNE result. Additionally, for proton kinetic energies above the Cherenkov threshold, the strange-quark contribution to the neutral-current axial vector form factor at Q{sub QE}{sup 2}=0, {Delta}s, was extracted from a fit to MiniBooNE data for the {nu}p{yields}{nu}p to {nu}N{yields}{nu}N cross section ratio. This value is found to be {Delta}s=-0.11{+-}0.36

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Numerically Integrated Orbits of the Major Saturnian Satellites fit to Earthbased Observations

We have fit numerically integrated orbits of the eight major satellites of Saturn to all available astrometric and meridian circle observations for the period of 1971 to 1992. The integration was carried out in cartesian coordinates in the J2000 system. The force model included the gravitational effects of the oblate primary, the mutual perturbations of the satellites, and perturbations due to Jupiter and the Sun. Values of the gravitational parameters of the Saturnian system, e.g. planet and satellite masses, were taken from Campbell, et. al., 1989, only the epoch state vectors of the satellites were adjusted to obtain orbits which fit the observations. All astrometric data was processed in the form of satellite relative positions which were weighted according to observer and opposition to reflect the varying data quality...

Jacobson, R. A.↗

The direct and indirect effects of copper on vector-borne disease dynamics

Metal pollution is a growing concern that affects the health of humans and animals globally. Copper is an essential insect micronutrient required for respiration, pigmentation and oxidative stress protection but can also act as a potentially toxic trace element. While several studies have focused on the negative fitness effects of copper on the aquatic larvae of mosquitoes, the effects of larval copper exposure on adult mosquito fitness (i.e., survival and fecundity) and their ability to transmit parasites (i.e., vector competence) remains unclear. Here, using a well-studied model vector-parasite system, the mosquito Aedes aegypti and parasite Dirofilaria immitis, we show that sublethal copper exposure in larval mosquitoes alters adult female fecundity and vector competence. Specifically, mosquitoes exposed to copper had a hormetic fecundity response and mosquitoes exposed to 600 μg/L of copper had significantly fewer infective parasite larvae than control mosquitoes not exposed to copper. Therefore, exposure of mosquito larvae to copper levels far below EPA-mandated safe drinking water limits (1300 μg/L) can impact vector-borne disease dynamics not only by reducing mosquito abundance (through increased larval mortality), but also by reducing parasite transmission risk. Our results also demonstrated that larval copper is retained through metamorphosis to adulthood in mosquitoes, indicating that these insects could transfer copper from aquatic to terrestrial foodwebs, especially in urban areas where they are abundant. To our knowledge this is the first study to directly link metal exposure with vector competence (i.e., ability to transmit parasites) in any vector-parasite system. Additionally, it also demonstrates unequivocally that mosquitoes can transfer contaminants from aquatic to terrestrial ecosystems. These results have broad implications for public health because they directly linking contaminants and vector-borne disease dynamics, as well as linking mosquitoes and contaminant dynamics.

54 ENVIRONMENTAL SCIENCES↗

Dispersion relation for hadronic light-by-light scattering: two-pion contributions

In our third paper of a series dedicated to a dispersive treatment of the hadronic light-by-light (HLbL) tensor, we derive a partial-wave formulation for two-pion intermediate states in the HLbL contribution to the anomalous magnetic moment of the muon (g - 2) μ , including a detailed discussion of the unitarity relation for arbitrary partial waves. We show that obtaining a final expression free from unphysical helicity partial waves is a subtle issue, which we thoroughly clarify. As a by-product, we obtain a set of sum rules that could be used to constrain future calculations of γ*γ* → ππ. We validate the formalism extensively using the pion-box contribution, defined by two-pion intermediate states with a pion-pole left-hand cut, and demonstrate how the full known result is reproduced when resumming the partial waves. Using dispersive fits to high-statistics data for the pion vector form factor, we provide an evaluation of the full pion box, a$π-box\atop{μ}$ =-15.9(2) × 10 -11 . As an application of the partial-wave formalism, we present a first calculation of ππ-rescattering effects in HLbL scattering, with γ*γ* → ππ helicity partial waves constructed dispersively using ππ phase shifts derived from the inverse-amplitude method. In this way, the isospin-0 part of our calculation can be interpreted as the contribution of the f0(500) to HLbL scattering in (g - 2) μ . We also argue that the contribution due to charged-pion rescattering implements corrections related to the corresponding pion polarizability and show that these are moderate. Our final result for the sum of pion-box contribution and its S-wave rescattering corrections reads a$π-box\atop{μ}$ + a$ππ, π-pole LHC\atop{μ, J=0}$ = -24(1) × 10 -11 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗