Search NASA⌕ Search

SEARCH · Search NASA

Results for “wide band gap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Fast Growth of Ga2O3 on Highly Offcut (100)-Oriented Substrates

Beta-Ga2O3 has emerged as a leading candidate for next-generation power electronics, radio frequency (RF) switches, and extreme environment electronics due to a wide band gap (4.6 - 4.9 eV), high dopability (approximately 40 meV activation energy for an isolated silicon donor), and melt growth characteristics resulting in commercially available 4-inch substrates and commercial demonstrations of 6-inch substrates by multiple techniques. The (100) surface of Ga2O3 is highly desirable from a device and epitaxy standpoint - bulk growth of (100) material is more scalable than (010), the surface is nearly lattice-matched to p-type partner NiO, and Al2O3 incorporates at higher concentrations without phase separation. More importantly, the impact ionization coefficients along the [100] direction are low, leading to the highest possible critical fields. This is advantageous compared to the current state of the art, (001), due to reduced surface defects and increased possible breakdown voltage. However, the epitaxial growth rate on (100) surfaces is less than 10% of other faces due to weak bonding and favorable desorption, and on-axis (100) growth easily forms twin domains. Recent demonstrations have shown growth rate improvements from 0.4 nm/min to 1.5 nm/min by growing on (100) wafers that are offcut 6 degrees in the -c direction. These films show step-flow growth from (20-1) step-edges and high electron mobility due to suppressed twins. Despite these exciting results, offcuts greater than 6 degrees have not been explored due to the waste associated with grinding and polishing large offcuts. In this talk we will discuss the molecular beam epitaxy (MBE) growth and properties of Beta-Ga2O3 grown on (100) substrates offcut in the -c direction up to 13.4 degrees. These large offcuts are enabled by edge-fed film-defined growth (EFG) where the offcut is grown into the surface by pulling the crystal through the EFG die with the seed crystal rotated by the desired offcut angle. We will demonstrate that 13.4 degrees offcut substrates still exhibit a terraced (100) surface, and that a >10x increase (>5 nm/min) in growth rate is achieved. As previously reported on lower offcuts, we observe reversal of substrate twin domains around the (001) direction at the substrate-epilayer interface. We will discuss electrical properties including record-low (by MBE) unintentional doping densities of < 5E15 cm-3 and critical breakdown field in Schottky barrier diodes comparable with state-of-the-art (001) Ga2O3 without edge termination.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Smart Silicon Carbide Power Module With Pulse Width Modulation Over Wi-Fi and Wireless Power Transfer-Enabled Gate Driver, Featuring Onboard State of Health Estimator and High-Voltage Scaling Capabilities: Preprint

A wide range of utility applications require controllable switches with features such as high-voltage (HV) blocking and high-current carrying capacity especially at high pulse width modulation (PWM) frequency. Low and medium voltage utility applications such as motor drives and flexible AC transmission systems (FACTS) as well as solid state transformers (SST) could also benefit from a low-cost HV switching module. Wide band gap (WBG) semiconductors such as SiC and GaN MOSFETs are considered to be the present and next generation device choices, although they have their own limitations. For relatively HV applications with demanding thermal management, SiC is still the only choice, and GaN dominates the low voltage regime. This manuscript proposes a new half bridge power MOSFET module that is suitable for conventional H-bridge of multilevel configurations used in HV applications. Constructed from bare SiC dies, this half bridge module takes advantage of (1) optimized MOSFET placement inside the module, (2) customized heat exchanger, manifold and cooling, (3) integrated gate driver module with PWM over wi-fi to eliminate the need for low voltage signals, (4) wireless power transfer (WPT) enabled gate driver and other ancillary circuits, (5) and the option to incorporate an onboard state of health (SOH) estimator module onboard. The entire architecture has been designed and built at National Renewable Energy Laboratory (NREL), Golden, CO.

baseplate design↗
DOE OSTI2020

Wannier–Koopmans method calculations for transition metal oxide band gaps

The widely used density functional theory (DFT) has a major drawback of underestimating the band gaps of materials. Wannier–Koopmans method (WKM) was recently developed for band gap calculations with accuracy on a par with more complicated methods. WKM has been tested for main group covalent semiconductors, alkali halides, 2D materials, and organic crystals. Here we apply the WKM to another interesting type of material system: the transition metal (TM) oxides. TM oxides can be classified as either with d 0 or d 10 closed shell occupancy or partially occupied open shell configuration, and the latter is known to be strongly correlated Mott insulators. We found that, while WKM provides adequate band gaps for the d0 and d10 TM oxides, it fails to provide correct band gaps for the group with partially occupied d states. This issue is also found in other mean-field approaches like the GW calculations. We believe that the problem comes from a strong interaction between the occupied and unoccupied d-state Wannier functions in a partially occupied d-state system. We also found that, for pseudopotential calculations including deep core levels, it is necessary to remove the electron densities of these deep core levels in the Hartree and exchange–correlation energy functional when calculating the WKM correction parameters for the d-state Wannier functions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Quaternary MgSiN 2 -GaN alloy semiconductors for deep UV applications

Ultrawide direct band gap semiconductors hold great promise for deep ultraviolet optoelectronic applications. Here we evaluate the potential of MgSiN 2 -GaN alloys for this purpose. Although MgSiN 2 itself has an indirect gap ~0.4 eV below its direct gap of ~6.5 eV, its different sign lattice mismatch from GaN in two different basal plane directions could avoid the tensile strain which limits Al x Ga 1–x N on GaN for high x. Two octet-rule-preserving structures (with space groups Pmn2 1 and P1n1) of a 50% alloy of MgSiN 2 and GaN are investigated and are both found to have gaps larger than 4.75 eV using quasiparticle self-consistent GW calculations. Both are nearly direct gap in the sense that the indirect gap is less than 0.1 eV lower than the direct gap. Furthermore, their mixing energies are positive yet small, with values of 8 (31) meV/atom for Pmn2 1 (P1n1), indicating only a small driving force toward phase separation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Band gap predictions of double perovskite oxides using machine learning

Abstract The compositional and structural variety inherent to oxide perovskites spawn wide-ranging applications. In perovskites, the band gap E g , a key material parameter for these applications, can be optimally controlled by varying the composition. Here, we implement a hierarchical screening process in which two cross-validated and predictive machine learning models for band gap classification and regression, trained using exhaustive datasets that span 68 elements of the periodic table, are applied sequentially. The classification model separates wide band gap materials, with E g ≥ 0.5 eV, from materials which have zero or relatively small band gaps, namely E g < 0.5 eV, and the second regression model quantitatively predicts the gap value of the wide band gap compounds. The study down-selects 13,589 cubic oxide perovskite compositions that are predicted to be experimentally formable, thermodynamically stable, and have a wide band gap. Of these, a subset of 310 compounds, which are predicted to be stable and formable with a confidence greater than 90%, are identified for further investigation. Our models are methodically analyzed via performance metrics and inter-dependence of model features to gain physical insight into the band gap prediction problem. Design maps to identify the variation of band gap with substitution of different elements are also presented.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Electrothermal Modeling and Analysis of Gallium Oxide Power Switching Devices: Preprint

Gallium oxide is an emerging wide band-gap material that has the potential to penetrate the power electronics market in the near future. In this paper, a finite-element gallium oxide semiconductor model is presented that can predict the electrical and thermal characteristics of the device. The finite element model of the two-dimensional device architecture is developed inside the Sentaurus environment. A vertical FinFET device architecture is employed to assess the device's behavior and its static and dynamic behavior. Enhancement-mode device operation is realized with this type of device architecture without the need for any selective area doping. The dynamic thermal behavior of the device is characterized through its short-circuit behavior. Based on the device static and dynamic behavior, it is envisioned that reliable vertical transistors can be fabricated for the power electronics applications.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Theoretical study of the electronic, thermodynamic, and thermo-conductive properties of y-LiAlO2 with 6Li isotope substitutions for tritium production

Lithium aluminate has attracted researchers’ interests due to its wide applications. The structural, electronic, optical, lattice phonon thermodynamic, and thermo-conductive properties of ?-LiAlO2 with 6Li-isotope substitution are investigated by density functional theory and lattice phonon dynamics. The calculated results show that ?-LiAlO2 possesses a wide band-gap of 4.63 eV. The valence band is mainly formed by p orbitals of Li, O, and Al. The calculated lattice thermal conductivity of ?-LiAlO2 is found to be in good agreement over a wide range of temperatures with the available experimental data. The calculated dielectric matrix shows anisotropic behavior along z and x (or y) axes. Due to the wide band-gap, the optical conductivity of ?-LiAlO2 is mainly contributed from the electron hopping between valence-conduction bands. Substitution of 7Li with 6Li isotope in ?-LiAlO2 leads to observable differences in the lattice phonon frequencies at higher frequencies (>8THz) and to slight changes in corresponding thermal conductivity and the infrared and Raman spectra which are in good agreement with the measured data. The relevance of these properties for tritium production through 6Li absorbing neutron in nuclear reactors is discussed.

ab initio thermodynamics, ?-LiAlO2 and 6Li-isotope↗
DOE OSTI2021

Light-driven permanent transition from insulator to conductor

The transition from insulator to conductor can be realized in some materials but requires modification of both the arrangement of atoms and their electronic configurations. This is often achieved by doping. Here we reveal a different mechanism the lattice may adopt to induce such a transition. Experiments showed the surprising finding that limited exposure to subband-gap light caused a permanent transition from an insulator state to a conductor state in the insulating oxide Ga 2 O 3 , with a nine orders of magnitude increase in electronic conduction. Furthermore, annealing up to 400 °C did not suppress or decrease the induced conductivity. Photoexcitation by light-induced modification in the charge state of defects and subsequent lattice distortion around them was suggested to be the underlying mechanism behind this transition. Density functional theory calculations confirmed that modifying the charge state of defects leads to redistribution of the localized electrons and massive structural distortion in the surrounding lattice, causing large shifts in the density of states and introducing new states with shallower energy levels. Both experimental and theoretical results revealed the introduction of stable shallow energy levels, explaining the mechanism behind the transition from an insulator to a conductor state by light. We suggest that this mechanism may occur in other wide band-gap metal oxides leading to drastic modification in their electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Formation Pathway of Wurtzite-like Cu 2 ZnSnSe 4 Nanocrystals

Cu 2 ZnSnSe 4 is a direct band gap semiconductor composed of Earth-abundant elements, making it an attractive material for thin film photovoltaic technologies. Cu 2 ZnSnSe 4 crystallizes in the kesterite structure type as a bulk material, but it can also crystallize in a metastable wurtzite-like crystal structure when synthesized on the nanoscale. The wurtzite-like polymorph introduces unique and useful properties to Cu 2 ZnSnSe 4 materials, including widely tunable band gaps and superior composi-tional flexibility as compared to kesterite Cu 2 ZnSnSe 4 . Here, we investigate the formation pathway of colloidally prepared wurtzite-like Cu 2 ZnSnSe 4 nanocrystals. We show that this quaternary material forms through a chain of reactions, starting with binary Cu 3 Se 2 nanocrystals that, due to both kinetic and thermodynamic reasons, preferentially react with tin to yield hexagonal copper tin selenide intermediates. Furthermore, these ternary intermediates then react with zinc to form the resulting wurtzite-like Cu 2 ZnSnSe 4 nanocrystals. Based on this formation pathway, we suggest synthetic methods that may prevent the for-mation of unwanted impurity phases that are known to hamper the efficiency of Cu 2 ZnSnSe 4 -based optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

First-principles modeling of conductivity at the (001), (110), and (111) SrTiO 3 /LaAlO 3 heterointerfaces

Here, the complex polar oxide heterojunction of SrTiO 3 /LaAlO 3 (STO/LAO) is of great interest due to the emergent physical phenomena observed at the interface. STO and LAO separately are wide band-gap insulators. However, upon joining them at the 001, 110, and 111 crystallographic planes, the interface undergoes a transition to a conductive state. Although first-principles modeling of the 001 plane interface has been widely studied, there is a lack of reports regarding the 110 and 111. This paper expands the theoretical model of the STO/LAO heterointerface to the three crystallographic planes (001, 110, and 111) where the conductivity has been experimentally reported. The calculations showed that whereas at the 001 interface the conductivity appears at a critical thickness of 4 monolayers of LAO, the 110 and 111 planes have no clear critical thickness; these two interfaces were always conductive. Nevertheless, the number of conductive electrons per unit cell increases with the thickness of the LAO layer in the 110 and 111 interfaces. This is related to the energy levels downshifting due to the electrostatic potential buildup (which was in the opposite direction respect to the 001 interface), increasing the number of conductive sates below the Fermi level. Given the absence of a critical thickness and the fact that chemical intermixing and oxygen vacancies at the interface were not considered, the main mechanism responsible for the conductivity in the 110 and 111 planes was attributed to the large structure reconstruction that locally changes the energy levels at the interface causing charge transfer and accumulation at the layers close to the interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Isolation of Single Donors in ZnO

The shallow donor in zinc oxide (ZnO) is a promising semiconductor spin qubit with optical access. Single indium donors are isolated in a commercial ZnO substrate using plasma focused ion beam (PFIB) milling. Quantum emitters are identified optically by spatial and frequency filtering. The indium donor assignment is based on the optical bound exciton transition energy and magnetic dependence. The emission stability of these single donors in terms of both intensity and frequency, alongside their transition linewidths less than twice the lifetime limit, highlight the promise of single In donors as optically accessible spin qubits. Here, the optical stability of single donors after FIB fabrication is promising for optical device integration required for scalable quantum technologies based on single donors in direct band gap semiconductors.

42 ENGINEERING↗
DOE OSTI2021

Theoretical study of intrinsic defects in cubic silicon carbide 3C-SiC

Using the local moment counter charge (LMCC) method to accurately represent the asymptotic electrostatic boundary conditions within density functional theory supercell calculations, we present a comprehensive analysis of the atomic structure and energy levels of point defects in cubic silicon carbide (3C-SiC). Finding that the classical long-range dielectric screening outside the supercell induced by a charged defect is a significant contributor to the total energy. we describe and validate a modified Jost screening model to evaluate this polarization energy. This leads to bulk-converged defect levels in finite size supercells. With the LMCC boundary conditions and a standard Perdew-Burke-Ernzerhof (PBE) exchange correlation functional, the computed defect level spectrum exhibits no band gap problem: the range of defect levels spans ~2.4 eV, an effective defect band gap that agrees with the experimental band gap. Comparing with previous literature, our LMCC-PBE defect results are in consistent agreement with the hybrid-exchange functional results of Oda et al. [J. Chem. Phys. 139, 124707 (2013)] rather than their PBE results. The difference with their PBE results is attributed to their use of a conventional jellium approximation rather than the more rigorous LMCC approach for handling charged supercell boundary conditions. The difference between standard dft and hybrid functional results for defect levels lies not in a band gap problem but rather in solving a boundary condition problem. The LMCC-PBE entirely mitigates the effect of the band gap problem on defect levels. The more computationally economical PBE enables a systematic exploration of 3C-SiC defects, where, most notably, we find that the silicon vacancy undergoes Jahn-Teller-induced distortions from the previously assumed T d symmetry, and that the divacancy, like the silicon vacancy, exhibits a site-shift bistability in p -type conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Quasiparticle self-consistent GW band structures and phase transitions of LiAlO 2 in tetrahedrally and octahedrally coordinated structures

In this work, a first-principles computational study is presented of various phases of LiAlO 2 . The relative total energies and equations of state of the α, β, and γ phases are determined after structural relaxation of each phase. The β and γ tetrahedral phases are found to be very close in energy and lattice volume with the γ phase having the lowest energy. The octahedral α phase is a high-pressure phase and the transition pressure from the γ and β phases to α is determined to be about 1 GPa. The electronic band structures of each phase at their own equilibrium volume are determined using the quasiparticle self-consistent (QS) GW method as well as using the 0.8 Σ approach in which the QS GW self-energy is reduced by a factor of 0.8 to correct for the underscreening of W in QS GW. The effective masses of the band edges and the nature of the band gaps are presented. The lowest energy γ phase is found to have a pseudodirect gap of 7.69 eV. The gap is direct at Γ but corresponds to a dipole forbidden transition. The imaginary part of the dielectric function and the absorption coefficient are calculated in the long-wavelength limit and the random phase approximation, without local field or electron-hole interaction effects for each phase, and their anisotropies are discussed. Si doping on the Al site is investigated as a possible n-type dopant in γ-LiAlO 2 using a 128-atom supercell corresponding to 3.125% Si on the Al sublattice in the generalized gradient approximation and a smaller 16-atom cell with 25% Si in the QS GW approximation. The Si is found to significantly perturb the conduction band and lower the gap but a clearly separated deep donor defect level is not found. However, the donor binding energy is still expected to be relatively deep, on the order of a few tenths eV in the hydrogenic effective mass approximation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Persistent Room-Temperature Photodarkening in Cu-Doped β - Ga 2 O 3

β–Ga 2 O 3 is an ultrawide band gap semiconductor with emerging applications in power electronics. Here, the introduction of acceptor dopants yields semi-insulating substrates necessary for thin-film devices. In the present work, exposure of Cu-doped β–Ga 2 O 3 to UV light > 4 eV is shown to cause large, persistent photo-induced darkening at room temperature. Electron paramagnetic resonance spectroscopy indicates that light exposure converts Cu 2+ to Cu 3+ , a rare oxidation state that is responsible for the optical absorption. The photodarkening is accompanied by the appearance of O–H vibrational modes in the infrared spectrum. Hybrid function calculations show that Cu acceptors can favorably complex with hydrogen donors incorporated as interstitial (Hi) or substitutional (HO) defects. When Cu Ga –HO complexes absorb light, hydrogen is released, contributing to the observed Cu 3+ species and O–H modes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

First-principles study of quantum defect candidates in beryllium oxide

Beryllium oxide (BeO) is a promising host for quantum defects because of its ultrawide band gap. We conducted comprehensive first-principles investigations of the native point defects in BeO using density functional theory with a hybrid functional. We found that the beryllium and oxygen vacancies are the most stable defects, whereas other native defects such as interstitials or antisites have high formation energies. We investigate the point defects as candidates for quantum defects by examining spin states and internal optical transitions. Here, the oxygen vacancy ($V$$^{+}_{O}$) emerges as a suitable spin qubit or single-photon emitter; we also find its stability can be enhanced by forming a (V O – Li Be ) 0 complex with a Li acceptor. The $O$$^{–}_{Be}$ antisite also has desirable optical and spin properties. Overall, because of its desirable properties as a host material, BeO could be an excellent host for quantum defects, with $V$$^{+}_{O}$, (V O – Li Be ) 0 , and $O$$^{–}_{Be}$ as prime candidates.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Comparison of interband related optical transitions and excitons in ZnGeN 2 and GaN

The optical dielectric function of ZnGeN 2 is calculated from the interband transitions using the energy bands calculated in the quasiparticle self-consistent (QS)GW^ method using two different levels of approximation: the independent particle approximation (IPA) and the Bethe-Salpeter Equation (BSE) approach. The first allows us to relate peaks in ε 2 to specific bands and k-points but does not include electron-hole interaction effects. The second includes electron-hole interaction or excitonic effects. The corresponding changes in the shape of ε 2 (ω) are found to be similar to those in GaN. The screened Coulomb interaction W^ is here calculated including electron-hole interactions in the polarization function and gives a band structure already going beyond the random phase approximation. The static dielectric constants including only electronic screening, commonly referred to as ε∞ , were calculated separately by extrapolating the wave vector dependent macroscopic dielectric function in the long-wavelength limit. Below the quasiparticle gap, we find three bound excitons optically active for different polarization. The convergence of these bound excitons with respect to the density of the k-mesh used in the BSE is studied and found to require a fine mesh. It is also found that these bound excitons originate from only the lowest conduction band and the top three valence bands. To incorporate the lattice screening, we include a scaling factor (ε∞/ε 0 ) 2 , which allows us to obtain exciton binding energies of the correct order of magnitude similar to those in GaN. Here, the excitons are related to each of the three fold split valence bands and the splittings of the latter are also studied as function of strain. Finally, a relation between the anisotropic effective masses and the valence band splitting is pointed out and explained.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon

Stacking solar cells with decreasing band gaps to form tandems presents the possibility of overcoming the single-junction Shockley-Queisser limit in photovoltaics. The rapid development of solution-processed perovskites has brought perovskite single-junction efficiencies >20%. However, this process has yet to enable monolithic integration with industry-relevant textured crystalline silicon solar cells. We report tandems that combine solution-processed micrometer-thick perovskite top cells with fully textured silicon heterojunction bottom cells. To overcome the charge-collection challenges in micrometer-thick perovskites, we enhanced threefold the depletion width at the bases of silicon pyramids. Moreover, by anchoring a self-limiting passivant (1-butanethiol) on the perovskite surfaces, we enhanced the diffusion length and further suppressed phase segregation. These combined enhancements enabled an independently certified power conversion efficiency of 25.7% for perovskite-silicon tandem solar cells. These devices exhibited negligible performance loss after a 400-hour thermal stability test at 85°C and also after 400 hours under maximum power point tracking at 40°C.

14 SOLAR ENERGY↗