Search NASA⌕ Search

SEARCH · Search NASA

Results for “wind field campaign”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A Bottom-up Approach to Improve the Representation of Deep Convective Clouds in Weather and Climate Models (Final Report)

A fundamental yet outstanding question about deep cumulus convection regards how convective updrafts, downdrafts, and surface-based cold pools are inter-related within organized storms, and how these three convective components are modulated by external and internal factors. We considered this question through numerical model simulations as well as data collected during the MC3E field campaign. One of our basic hypotheses was that deep cold pools are forced by wide downdrafts which arise from wide updrafts. This “bottom-up” perspective required consideration of the external controls on updraft width, and then the internal controls on cold-pool characteristics including depth. Model experiments showed that environmental vertical wind shear (an external factor) exerts a particularly strong control on updraft width; analyses of linear and nonlinear dynamic pressure forcing readily explain this control. The experiments also showed that increases in updraft width are accompanied by corresponding increases in downdraft width and cold-pool depth. The updraft–downdraft connection is through precipitation: the wide area of precipitation that will be initiated in a wide updraft will in turn lead to a wide downdraft. The downdraft–cold pool connection is through mass continuity: at the downdraft terminus, the large downdraft mass flux through a wide downdraft must lead to a deep cold pool. Model experiments also showed that the cold-pool depth and other characteristics can be significantly modulated by microphysical processes (internal factors). Specifically, the cold-pool expansion rate, depth, and intensity was found to depend most strongly on the amount of rain evaporation near the ground. However, the sustenance of the cold pool itself depended upon the downdrafts strengthened by sublimation of graupel higher in the storm. Finally, field campaign data revealed compelling inter-relationships between the cold-pool characteristics, and downdraft transience in terms of the microphysics. For example, pulses of hail and graupel (also internal factors) within downdrafts resulted in short-lived increases in the cold-pool depth. However, the cold-pool speed appeared to be relatively independent of the cold-pool depth and intensity, suggesting limitations of density current theory to convective cold pools in nature.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of ARM tethered-balloon system instrumentation for supercooled liquid water and distributed temperature sensing in mixed-phase Arctic clouds

A tethered-balloon system (TBS) has been developed and is being operated by Sandia National Laboratories (SNL) on behalf of the U.S. Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) User Facility in order to collect in situ atmospheric measurements within mixed-phase Arctic clouds. Periodic tethered-balloon flights have been conducted since 2015 within restricted airspace at ARM's Advanced Mobile Facility 3 (AMF3) in Oliktok Point, Alaska, as part of the AALCO (Aerial Assessment of Liquid in Clouds at Oliktok), ERASMUS (Evaluation of Routine Atmospheric Sounding Measurements using Unmanned Systems), and POPEYE (Profiling at Oliktok Point to Enhance YOPP Experiments) field campaigns. The tethered-balloon system uses helium-filled 34 m 3 helikites and 79 and 104 m 3 aerostats to suspend instrumentation that is used to measure aerosol particle size distributions, temperature, horizontal wind, pressure, relative humidity, turbulence, and cloud particle properties and to calibrate ground-based remote sensing instruments. Supercooled liquid water content (SLWC) sondes using the vibrating-wire principle, developed by Anasphere Inc., were operated at Oliktok Point at multiple altitudes on the TBS within mixed-hase clouds for over 200 h. Sonde-collected SLWC data were compared with liquid water content derived from a microwave radiometer, Ka-band ARM zenith radar, and ceilometer at the AMF3, as well as liquid water content derived from AMF3 radiosonde flights. The in situ data collected by the Anasphere sensors were also compared with data collected simultaneously by an alternative SLWC sensor developed at the University of Reading, UK; both vibrating-wire instruments were typically observed to shed their ice quickly upon exiting the cloud or reaching maximum ice loading. Temperature sensing measurements distributed with fiber optic tethered balloons were also compared with AMF3 radiosonde temperature measurements. Combined, the results indicate that TBS-distributed temperature sensing and supercooled liquid water measurements are in reasonably good agreement with remote sensing and radiosonde-based measurements of both properties. From these measurements and sensor evaluations, tethered-balloon flights are shown to offer an effective method of collecting data to inform and constrain numerical models, calibrate and validate remote sensing instruments, and characterize the flight environment of unmanned aircraft, circumventing the difficulties of in-cloud unmanned aircraft flights such as limited flight time and in-flight icing.

47 OTHER INSTRUMENTATION↗

Measurements of TRACER pre-convective conditions and mesoscale circulations using small unmanned aircraft systems (sUAS)

Improved comprehension of the physical processes governing convective cloud formation and lifecycle are of critical importance for understanding and predicting future climate states. The influence of these clouds on the planetary energy budget, including on precipitation, is significant. Things are particularly complex in coastal regimes, where gradients in aerosol particle properties, localized circulations such as sea breezes, and large population centers are found. To date, numerical models struggle to accurately represent these critical clouds and are therefore challenged to provide a realistic view on the planetary energy budget. Through the proposed research, we deployed two uncrewed aircraft systems (UAS) equipped with a variety of instruments alongside sensors deployed by the US Department of Energy Atmospheric Radiation Measurement (ARM) program for the TRACER (Tracking Aerosol Convection Interactions Experiment) field campaign. The two small UAS platforms consisted of a CU RAAVEN fixed-wing airplane and an OU CopterSonde system, with the copter collecting frequent vertical profiles of thermodynamic and kinematic variables such as temperature, pressure, wind and humidity. At the same time, the fixed-wing captured horizontal gradients of these quantities and aerosol size distribution. These systems were deployed south of the Houston metro area, in an area that is impacted by the Gulf of Mexico sea breeze on a daily basis. These observations offer enhanced and complementary perspectives to those provided by the DOE ARM Mobile Facility (AMF) which is was deployed in southeast Houston, and an ancillary site in a more rural location west of the urban Houston area. Quality-controlled versions of the UAS data were collected and posted on the DOE ARM data archive after the conclusion of the campaign where they are accessible by the research community and general public. The UAS perspective offers revolutionary insight into key spatial and temporal effects that have not been evaluated previously.

54 ENVIRONMENTAL SCIENCES↗

A thermal-driven graupel generation process to explain dry-season convective vigor over the Amazon

Large-eddy simulations (LESs) are conducted for each day of the intensive observation periods (IOPs) of the Green Ocean Amazon (GoAmazon) field campaign to characterize the updrafts and microphysics within deep convective cores while contrasting those properties between Amazon wet and dry seasons. Mean Doppler velocity (V dop ) values simulated using LESs are compared with 2-year measurements from a radar wind profiler (RWP) as viewed by statistical composites separated according to wet- and dry-season conditions. In the observed RWP and simulated LES V dop composites, we find more intense low-level updraft velocity, vigorous graupel generation, and intense surface rain during the dry periods compared with the wet periods. To investigate coupled updraft–microphysical processes further, single-day golden cases are selected from the wet and dry periods to conduct detailed cumulus thermal tracking analysis. Tracking analysis reveals that simulated dry-season environments generate more droplet-loaded low-level thermals than wet-season environments. This tendency correlates with seasonal contrasts in buoyancy and vertical moisture advection profiles in large-scale forcing. Employing a normalized time series of mean thermal microphysics, the simulated cumulus thermals appear to be the primary generator of cloud droplets. When subsequent thermals penetrate the ice crystal layer, droplets within the thermals interact with entrained ice crystals, which enhances riming in the thermals. This appears to be a production pathway of graupel/hail particles within simulated deep convective cores. In addition, less-diluted dry-case thermals tend to be elevated higher, and graupel grows further during sedimentation after spilling out from thermals. Therefore, greater concentrations of low-level moist thermals likely result in more graupel/hail production and associated dry-season convective vigor.

54 ENVIRONMENTAL SCIENCES↗

Advanced Precipitation and Boundary Layer Data Products Derived from ARM Radar Wind Profilers

This research project was successful in delivering on four main objectives. First, software was developed to accurately calculate 915-MHz radar wind profiler (RWP) spectrum moments from the recorded Doppler velocity power spectra. Second, software was developed to calibrate the RWP reflectivity factor using collocated surface disdrometer observations. Third, the Python processing code was documented and given to the ARM Infrastructure to produce ARM ‘b level’ calibrated RWP products. Fourth, calibrated RWP products were uploaded to the ARM Archive as PI Products for 10 years of SGP RWP observations and for GoAmazon and TRACER field campaign RWP observations. In addition to working with RWP observations, this research project also worked with KAZR observations to distinguish insects from boundary layer clouds to help improve the ARSCL cloud mask product. The PI worked with senior and early career ARM funded scientists at BNL exploring how to include calibrated RWP moments into future versions of the ARSCL product.

54 ENVIRONMENTAL SCIENCES↗

The Observed Effects of Cold Pools on Convection Triggering and Organization during DYNAMO/AMIE

Cold pools that form from existing convection can generate new clouds nearby, a process that has been suggested to contribute to cloud organization. However, some disagreement exists on the role of cold pools in cloud organization over tropical oceans, and much remains to be understood on how this role depends on the state of large-scale disturbances such as the Madden-Julian Oscillation (MJO). Here, this study addresses this question by examining the intraseasonal variability in the properties of cold pools and their effects on convection triggering using observations. The unique set of surface meteorology data and ground-based radars deployed during the DYNAMO/AMIE field campaign are used to identify cold pools and the associated spatiotemporal evolution of rainfall. The results suggest that cold pools enhance rainfall at their expected speed of 3–8 m s –1 , which includes the Doppler-shifting effect by the background wind. The cold pools also enhance rainfall mainly within a 20 km radius, especially in the direction of boundary-layer vertical wind shear. However, gravity waves appear to contribute predominantly to the propagation of convection over a wider range of distances due to their faster propagation speeds. The interface of convection triggering and propagation at different speeds of cold pools and gravity waves seems to contribute to cloud organization. The effectiveness of cold pools and gravity waves on cloud organization also depends highly on the MJO due to the combined effects of changes in environmental humidity and boundary to lower-tropospheric wind.

54 ENVIRONMENTAL SCIENCES↗

Mesoscale to Microscale Simulations over Complex Terrain with the Immersed Boundary Method in the Weather Research and Forecasting Model

Improvements to the Weather Research and Forecasting (WRF) Model are made to enable multiscale simulations over highly complex terrain with dynamically downscaled boundary conditions from the mesoscale to the microscale. Over steep terrain, the WRF Model develops numerical errors that are due to grid deformation of the terrain-following coordinates. An alternative coordinate system, the immersed boundary method (IBM), has been implemented into WRF, allowing for simulations over highly complex terrain; however, the new coordinate system precluded nesting within mesoscale simulations using WRF’s native terrain-following coordinates. Here, the immersed boundary method and WRF’s grid-nesting framework are modified to seamlessly work together. This improved framework for the first time allows for large-eddy simulation over complex (urban) terrain with IBM to be nested within a typical mesoscale WRF simulation. Simulations of the Joint Urban 2003 field campaign in Oklahoma City, Oklahoma, are performed using a multiscale five-domain nested configuration, spanning horizontal grid resolutions from 6 km to 2 m. These are compared with microscale-only simulations with idealized lateral boundary conditions and with observations of wind speed/direction and SF 6 concentrations from a controlled release from intensive observation period 3. The multiscale simulation, which is configured independent of local observations, shows similar model skill predicting wind speed/direction and improved skill predicting SF 6 concentrations when compared with the idealized simulations, which require use of observations to set mean flow conditions. Use of this improved multiscale framework shows promise for enabling large-eddy simulation over highly complex terrain with dynamically downscaled boundary conditions from mesoscale models.

42 ENGINEERING↗

An Unmanned Aerial System (UAS) for concurrent measurements of solar-induced chlorophyll fluorescence and hyperspectral reflectance toward improving crop monitoring

Unmanned aerial system (UAS)-based remote sensing can provide high spatial- and temporal-resolution crop monitoring for precision management. Existing crop monitoring UAS primarily use conventional techniques such as multi-spectral broadband vegetation indices (VIs) to track canopy structure/biomass. Recently developed lightweight hyperspectral sensors can track crop physiology and performance via complementary signals such as solar-induced chlorophyll fluorescence (SIF) and photochemical reflectance index (PRI) that can be derived from hyperspectral reflectance. However, few existing UAS can acquire high-quality SIF and hyperspectral reflectance. Here, we designed a novel UAS that simultaneously captures far-red SIF and hyperspectral reflectance, using a single bifurcated fiber and motorized arm to measure downwelling and upwelling irradiance. The UAS was tested over (1) a heterogeneous corn field with spatially varying crop yield potential and (2) a set of soybean and corn plots under differing nutrient treatments. Our UAS can maintain stability under low-to-moderate winds (2–3 m/s) with <0.4 m geolocation accuracy, <0.1 m altitude drift, and <1.5° error of the fiber optic from nadir position during scanning. Weekly seasonal campaigns reveal that SIF outperforms conventional VIs such as the normalized difference vegetation index (NDVI) for distinguishing plots with different crop yield potential, especially after canopy closure when NDVI tends to saturate. The UAS can capture the diurnal dynamics of SIF and PRI for both corn and soybean. At the seasonal scale, SIF acquired from the UAS correlates well with that from a fixed SIF tower system ( R 2 = 0.81), which measured the same target albeit with different footprints, demonstrating the capability of UAS in characterizing the seasonal progression of crop activity. In conclusion, our newly developed UAS provides high-quality SIF and hyperspectral reflectance, facilitating mechanistic understanding of the physiological control on photosynthesis dynamics. Our findings also imply that this UAS could enable extension of fixed tower-based systems to monitor multiple targets from diurnal to seasonal scales and improve monitoring of heterogeneous fields.

59 BASIC BIOLOGICAL SCIENCES↗

Measurements and Model Improvement: Insight into NWP Model Error Using Doppler Lidar and Other WFIP2 Measurement Systems

Abstract Doppler-lidar wind-profile measurements at three sites were used to evaluate NWP model errors from two versions of NOAA’s 3-km-grid HRRR model, to see whether updates in the latest version 4 reduced errors when compared against the original version 1. Nested (750-m grid) versions of each were also tested to see how grid spacing affected forecast skill. The measurements were part of the field phase of the Second Wind Forecasting Improvement Project (WFIP2), an 18-month deployment into central Oregon–Washington, a major wind-energy-producing region. This study focuses on errors in simulating marine intrusions, a summertime, 600–800-m-deep, regional sea-breeze flow found to generate large errors. HRRR errors proved to be complex and site dependent. The most prominent error resulted from a premature drop in modeled marine-intrusion wind speeds after local midnight, when lidar-measured winds of greater than 8 m s −1 persisted through the next morning. These large negative errors were offset at low levels by positive errors due to excessive mixing, complicating the interpretation of model “improvement,” such that the updates to the full-scale versions produced mixed results, sometimes enhancing but sometimes degrading model skill. Nesting consistently improved model performance, with version 1’s nest producing the smallest errors overall. HRRR’s ability to represent the stages of sea-breeze forcing was evaluated using radiation budget, surface-energy balance, and near-surface temperature measurements available during WFIP2. The significant site-to-site differences in model error and the complex nature of these errors mean that field-measurement campaigns having dense arrays of profiling sensors are necessary to properly diagnose and characterize model errors, as part of a systematic approach to NWP model improvement. Significance Statement Dramatic increases in NWP model skill will be required over the coming decades. This paper describes the role of major deployments of accurate profiling sensors in achieving that goal and presents an example from the Second Wind Forecast Improvement Program (WFIP2). Wind-profile data from scanning Doppler lidars were used to evaluate two versions of HRRR, the original and an updated version, and nested versions of each. This study focuses on the ability of updated HRRR versions to improve upon predicting a regional sea-breeze flow, which was found to generate large errors by the original HRRR. Updates to the full-scale HRRR versions produced mixed results, but the finer-mesh versions consistently reduced model errors.

Meteorology & Atmospheric Sciences↗

Near-Cloud Atmospheric Ingredients for Deep Convection Initiation

A lack of routine environmental observations located near deepening cumulus congestus clouds limits verification of important theorized and simulated updraft–environment interaction processes occurring during deep convection initiation (CI). We analyze radiosonde profiles collected during several hundred CI events near a mountain range in central Argentina during the CACTI field campaign. Statistical analyses illustrate environmental conditions supporting radar-observed CI outcomes that span a spectrum of convective cell depths, widths, and durations, as well as events lacking precipitating convection. Tested environmental factors include a large variety of sounding-derived measurements of CAPE, CIN, moisture, terrain-relative winds, vertical shear, and lifted parcel properties, with supplemental model reanalysis of background larger-scale vertical motion. CAPE and CIN metrics do not consistently differentiate CI success from failure. Only a few environmental factors contain consistent monotonic relationships among the spectrum of cloud depths achieved during CI: (i) the depth and strength of background ascent, and (ii) the component of low-level flow oriented parallel to the ridgeline. These metrics suggest that the ability of the surrounding flow to lift parcels to their LFC and terrain-modified flow are consistently relevant processes for CI. Low- to midlevel relative humidity strongly discriminated between CI and non-CI events, likely reflecting entrainment-driven dilution processes. However, we could not confidently conclude that relative humidity similarly discriminated robust from marginal CI events. Circumstantial evidence was found linking cell width, an important cloud property governing the probability of CI, to LCL height, boundary layer depth, depth and magnitude of the CIN layer, and ambient wind shear.

Storm environments↗

Grand-scale Atmospheric Imaging Apparatus (GAIA) and Wind LiDAR Multi-scale Measurements in the Atmospheric Surface Layer

Understanding the organization and dynamics of turbulence structures in the atmospheric surface layer (ASL) is important for fundamental and applied research in different fields, including weather prediction, snow settling, particle and pollutant transport, and wind energy. The main challenges associated with probing and modeling turbulence in the ASL are: i) the broad range of turbulent scales associated with the different eddies present in high Reynolds-number boundary layers ranging from the viscous scale ($\mathcal{O}$(mm)) up to large energy-containing structures ($\mathcal{O}$(km)); ii) the non-stationarity of the wind conditions and the variability associated with the daily cycle of the atmospheric stability; iii) the interactions among eddies of different sizes populating different layers of the ASL, which contribute to momentum, energy, and scalar turbulent fluxes. Creative and innovative measurement techniques are required to probe near-surface turbulence by generating spatio-temporally-resolved data in the proximity of the ground and, at the same time, covering the entire ASL height with large enough streamwise extent to characterize the dynamics of larger eddies evolving aloft. To this aim, the U.S. National Science Foundation sponsored the development of the Grand-scale Atmospheric Imaging Apparatus (GAIA) enabling super-large snow particle image velocimetry (SLPIV) in the near-surface region of the ASL. This inaugural version of GAIA provides a comprehensive measuring system by coupling SLPIV and two scanning Doppler LiDARs to probe the ASL at an unprecedented resolution. A field campaign performed in 2021–2022 and its preliminary results are presented herein elucidating new research opportunities enabled by the GAIA measuring system.

17 WIND ENERGY↗

A Surface Radiation Balance Dataset from Siple Dome in West Antarctica for Atmospheric and Climate Model Evaluation

Abstract A field campaign at Siple Dome in West Antarctica during the austral summer 2019/20 offers an opportunity to evaluate climate model performance, particularly cloud microphysical simulation. Over Antarctic ice sheets and ice shelves, clouds are a major regulator of the surface energy balance, and in the warm season their presence occasionally induces surface melt that can gradually weaken an ice shelf structure. This dataset from Siple Dome, obtained using transportable and solar-powered equipment, includes surface energy balance measurements, meteorology, and cloud remote sensing. To demonstrate how these data can be used to evaluate model performance, comparisons are made with meteorological reanalysis known to give generally good performance over Antarctica (ERA5). Surface albedo measurements show expected variability with observed cloud amount, and can be used to evaluate a model’s snowpack parameterization. One case study discussed involves a squall with northerly winds, during which ERA5 fails to produce cloud cover throughout one of the days. A second case study illustrates how shortwave spectroradiometer measurements that encompass the 1.6- μ m atmospheric window reveal cloud phase transitions associated with cloud life cycle. Here, continuously precipitating mixed-phase clouds become mainly liquid water clouds from local morning through the afternoon, not reproduced by ERA5. We challenge researchers to run their various regional or global models in a manner that has the large-scale meteorology follow the conditions of this field campaign, compare cloud and radiation simulations with this Siple Dome dataset, and potentially investigate why cloud microphysical simulations or other model components might produce discrepancies with these observations. significance statement Antarctica is a critical region for understanding climate change and sea level rise, as the great ice sheets and the ice shelves are subject to increasing risk as global climate warms. Climate models have difficulties over Antarctica, particularly with simulation of cloud properties that regulate snow surface melting or refreezing. Atmospheric and climate-related field work has significant challenges in the Antarctic, due to the small number of research stations that can support state-of-the-art equipment. Here we present new data from a suite of transportable and solar-powered instruments that can be deployed to remote Antarctic sites, including regions where ice shelves are most at risk, and we demonstrate how key components of climate model simulations can be evaluated against these data.

54 ENVIRONMENTAL SCIENCES↗

Aircraft observations in a tropical supercluster over the equatorial Indian Ocean during MISO-BOB field campaign

The Monsoon Intra-Seasonal Oscillations in the Bay of Bengal (MISO-BOB) field campaign was conducted in the Indian Ocean during the 2018 and 2019 summer monsoon seasons. WC-130J aircraft of the 53rd Weather Reconnaissance Squadron of the US Air Force participated in the campaign in June 2018. The dropsonde observations across a tropical supercluster showed zonal wind variations in association with the structure of the convectively coupled Kelvin wave (CCKW). Within the supercluster, easterlies (westerlies) were observed in the upper (lower) troposphere; this transformation occurred just below the 0° C level. The cold pool had an easterly component throughout, and it was coldest (by 2.5° C) at the center of the supercluster, deepest (~ 1000 m) at its rear/western end, and shallowest (~ 300 m) at the front/eastern end. The level of free convection (LFC) at the front end was at 897 m altitude. At the eastern flank of the supercluster, zonal convergence in the lower troposphere occurred between 500-1500 m levels above the surface between the westerlies within the supercluster and opposing ambient easterlies. Thus, the uplifting of conditionally unstable air parcels above LFC to the east of the supercluster was likely to occur due to this convergence rather than the cold pool influence. Conversely, the western flank of the supercluster had low-level zonal divergence. These observations support the notion of ‘self-similarity’ among the mesoscale convective systems and large-scale waves.

54 ENVIRONMENTAL SCIENCES↗

The Surface Atmosphere Integrated Field Laboratory (SAIL) Campaign

The science of mountainous hydrology spans the atmosphere through the bedrock and inherently crosses physical and disciplinary boundaries: land-atmosphere interactions in complex terrain enhance clouds and precipitation, while watersheds retain and release water over a large range of spatial and temporal scales. Limited observations in complex terrain challenge efforts to improve predictive models of the hydrology in the face of rapid changes. The Upper Colorado River exemplifies these challenges, especially with ongoing mismatches between precipitation, snowpack, and discharge. Consequently, the U.S. Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) user facility has deployed an observatory to the East River Watershed near Crested Butte, Colorado between September 2021 and June 2023 to measure the main atmospheric drivers of water resources, including precipitation, clouds, winds, aerosols, radiation, temperature and humidity. This effort, called the Surface Atmosphere Integrated Field Laboratory (SAIL), is also working in tandem with DOE-sponsored surface and subsurface hydrologists and other federal, state, and local partners. SAIL data can be benchmarks for model development by producing a wide range of observational information on precipitation and its associated processes, including those processes that impact snowpack sublimation and redistribution, aerosol direct radiative effects in the atmosphere and in the snowpack, aerosol impacts on clouds and precipitation, and processes controlling surface fluxes of energy and mass. Preliminary data from SAIL’s first year showcase the rich information content in SAIL’s many data-streams and support testing hypotheses that will ultimately improve scientific understanding and predictability of Upper Colorado River hydrology in 2023 and beyond.

54 ENVIRONMENTAL SCIENCES↗

Rapid and Temporary Deployment of Fiber-Optic Arrays to Measure Surface Chemical Explosion Series with Distributed Acoustic Sensing

Rapid and temporary distributed acoustic sensing (DAS) deployments are crucial for accurately capturing the seismic wavefield following major events, such as earthquakes, or in anticipation of known events of interest, such as chemical explosions. We provide an overview of two DAS campaigns conducted in May and October 2024 to record the seismoacoustic waves generated by two series of surface chemical explosions in New Mexico, United States, involving 1- and 10-ton trinitrotoluene-equivalent charges. In both campaigns, we deployed approximately 2 km of fiber-optic cables in a dry riverbed, about 12 km east of the explosion sites. For the October campaign, seven geophones and two anemometers were collocated with the fiber. We describe the field deployments and present preliminary results from the recorded signals. Specifically, we cross analyze the data recorded in May and October, validate the DAS data with geophone measurements, and highlight the benefits of burying fibers to reduce wind noise and improve signal-to-noise ratios. This study demonstrates the potential of DAS to record the seismoacoustic waves generated by surface chemical explosions of varying sizes at distances of approximately 10 km from the source.

58 GEOSCIENCES↗

Flower‐Type Organized Trade‐Wind Cumulus: A Multi‐Day Lagrangian Large Eddy Simulation Intercomparison Study

Shallow cumulus cloud fields in subtropical marine trade wind environments, particularly over the tropical Atlantic Ocean, show distinct organizational patterns. Among these, Flower‐type clouds are characterized by expansive stratiform cloud patches surrounded by regions of scattered convection. The objectives of this study were (a) to construct a case study of a time period during the EUREC 4 A/ATOMIC field campaign when Flower‐type organization was observed, (b) to evaluate the fidelity of a multi‐model ensemble of large eddy simulations of that case, and (c) to analyze the interaction between cloud and precipitation processes and mesoscale organization in the simulations. The simulations follow a quasi‐Lagrangian trajectory, allowing mesoscale features to develop over time in a domain that follows the boundary‐layer airmass. The results show a broad agreement in simulated thermodynamic properties across different LES codes, with Flower‐type cloud patches appearing within hours of each other. The consensus among models is consistent with observations made during the EUREC 4 A/ATOMIC field campaign on the specific day of interest. The cloud structure reveals three distinct peaks in the joint probability densities of cloud base and cloud top height, with the dominant peak at any given time influenced by the stage of cloud organization. The simulated cloud system evolution reveals consistent occurrence of maxima in liquid water path and rain rate before Flower reaches its maximum length scale. Targeted sensitivity tests reveal a weak relationship between Cloud Droplet Number concentration and the extent/degree/type of organization.

EUREC4A↗

The Impact of Constrained Data Assimilation on the Forecasts of Three Convection Systems During the ARM MC3E Field Campaign

A constrained data assimilation (CDA) system based on the ensemble variational (EnVar) method and physical constraints of mass and water conservations is evaluated through three convective cases during the Midlatitude Continental Convective Clouds Experiment (MC3E) of the Atmospheric Radiation Measurement (ARM) program. Compared to the original data assimilation (ODA), the CDA is shown to perform better in the forecasted state variables and simulated precipitation. The CDA is also shown to greatly mitigate the loss of forecast skills in observation denial experiments when radar radial winds are withheld in the assimilation. Modifications to the algorithm and sensitivities of the CDA to the calculation of the time tendencies in the constraints are described.

54 ENVIRONMENTAL SCIENCES↗

How Generalizable is a Machine-Learning Approach for Modeling Hub-Height Turbulence Intensity?

Hub-height turbulence intensity is essential for a variety of wind energy applications. However, simulating it is a challenging task. Simple analytical models have been proposed in the literature, but they all come with significant limitations. Even state-of-the-art numerical weather prediction models, such as the Weather Research and Forecasting model, currently struggle to predict hub-height turbulence intensity. Here, we propose a machine-learning-based approach to predict hub-height turbulence intensity from other hub-height and ground-level atmospheric measurements, using observations from the Perdigao field campaign and the Southern Great Plains atmospheric observatory. We consider a random forest regression model, which we validate first at the site used for training and then under a more robust round-robin approach, and compare its performance to a multivariate linear regression. The random forest successfully outperforms the linear regression in modeling hub-height turbulence intensity, with a normalized root-mean-square error as low as 0.014 when using 30-minute average data. In order to achieve such low root-mean-square error values, the knowledge of hub-height turbulence kinetic energy (which can instead be modeled in the Weather Research and Forecasting model) is needed. Interestingly, we find that the performance of the random forest generalizes well when considering a round-robin validation (i.e., when the algorithm is trained at one site such as Perdigao or Southern Great Plains) and then applied to model hub-height turbulence intensity at the other location.

17 WIND ENERGY↗