Search NASA⌕ Search

SEARCH · Search NASA

Results for “wing aerodynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Elastic deformation effects on aerodynamic characteristics for a high-aspect-ratio supercritical-wing model

The results of an investigation of the deformations of a high-aspect-ratio, force/pressure, supercritical-wing model during wind tunnel tests and the effects these deformations have on the wing aerodynamics are presented. A finite element model of the wing was developed, and then, for conditions corresponding to wind tunnel test points, experimental aerodynamic loads and theoretical aerodynamic loads were applied to the finite element model. Comparisons were made between the results of these load conditions for changes in structural deflections and for changes in aerodynamic characteristics. The results show that the deformations are quite small and that the pressure data are not significantly affected by model deformation.

Watson, J. J.↗
NASA NTRS1988

Constructing Gloved wings for aerodynamic studies

Recently, two aircraft from the Dryden Flight Research Facility were used in the general study of natural laminar flow (NLF). The first, an F-14A aircraft on short-term loan from the Navy, was used to investigate transonic natural laminar flow. The second, an F-15A aircraft on long-term loan from the Air Force, was used to examine supersonic NLF. These tests were follow-on experiments to the NASA F-111 NLF experiment conducted in 1979. Both wings of the F-14A were gloved, in a two-phased experiment, with full-span(upper surface only) airfoil shapes constructed primarily of fiberglass, foam, and resin. A small section of the F-15A right wing was gloved in a similar manner. Each glove incorporated provisions for instrumentation to measure surface pressure distributions. The F-14A gloves also had provisions for instrumentation to measure boundary layer profiles, acoustic environments, and surface pitot pressures. Discussions of the techniques used to construct the gloves and to incorporate the required instrumentation are presented.

Bohn-Meyer, Marta R.↗
NASA NTRS2011

Analysis of Asymmetric Aircraft Aerodynamics Due to an Experimental Wing Glove

Aerodynamic analysis on a business jet with a wing glove attached to one wing is presented and discussed. If a wing glove is placed over a portion of one wing, there will be asymmetries in the aircraft as well as overall changes in the forces and moments acting on the aircraft. These changes, referred to as deltas, need to be determined and quantified to make sure the wing glove does not have a drastic effect on the aircraft flight characteristics. TRANAIR, a non-linear full potential solver was used to analyze a full aircraft, with and without a glove, at a variety of flight conditions and angles of attack and sideslip. Changes in the aircraft lift, drag and side force, along with roll, pitch and yawing moment are presented. Span lift and moment distributions are also presented for a more detailed look at the effects of the glove on the aircraft. Aerodynamic flow phenomena due to the addition of the glove and its fairing are discussed. Results show that the glove used here does not present a drastic change in forces and moments on the aircraft, but an added torsional moment around the quarter-chord of the wing may be a cause for some structural concerns.

Hartshorn, Fletcher↗
NASA NTRS1976

Some recent developments in the aerodynamics of wings for high speeds

The items discussed are: (1) a recently proposed correction formula for the effect of compressibility in two dimensional subsonic flow; (2) the equivalence rule and the area rule for transonic speeds; (3) reciprocal relations in linearized wing theory; and (4) some general results connected with the problem of minimum wave resistance. The paper concludes with an example showing indentation of the fuselage to obtain favorable interference with the wing at supersonic speeds.

Jones, R. T.↗
NASA NTRS1978

Utilization of the wing-body aerodynamic analysis program

The analysis program was used to investigate several aircraft characteristics. The studies performed included vehicle stability analysis, determination of upwash angle, identification of nonpotential flow, launch dynamics, and wake vortex upset loads. The techniques and are discussed. When possible, computed results are compared with experimental data.

Curry, R. E.↗
NASA NTRS1987

Fixed wing CCW aerodynamics with and without supplementary thrust deflection

The concept of circulation control was successfully demonstrated in flight using an A-6 aircraft. Circulation control can provide an aircraft with STOL performance of heavy lift capability. For ship based Naval aircraft the lower takeoff and landing velocities result in reduced deck gear and wind over the deck requirements. Circulation control airfoils can be mechanically less complex and lightweight compared to multi-element high lift airfoils.

Nichols, J. H.↗
NASA NTRS1992

The appliation of potential CFD methods to helicopter hover flows

Fixed-wing code development is now aimed primarily at the solution of problems dominated by separation--based on the assumptions that the ability to solve such problems implies the ability to solve all other problems and that present inviscid method are already adequate for most other problems. Neither of the above assumptions are correct for rotary wing problems. This is because of the unique and overriding importance of wake modeling to rotor problems and also due to the well-known numerical diffusion problems which convectional Eulerian Computational fluid dynamics (CFD) method encounter when called on to convect strong vortical regions for long distances. The need for accurate wake analyses is probably the most fundamental difference between rotory and fixed-wing aerodynamics. In addition, rotary wing complexity requires a much more intimate relationship between test and analysis than is common in fixed-wing work. With these issues in mind, this paper will review some of our recent experience in using a unique-Eulerian-Lagrangian Computational fluid dynamics (CFC) method for the solution of a critical rotor-wake problem--the prediction of hover performance.

Caradonna, F. X.↗
NASA NTRS2015

F-16XL Hybrid Reynolds-Averaged Navier-Stokes/Large Eddy Simulation on Unstructured Grids

This study continues the Cranked Arrow Wing Aerodynamics Program, International (CAWAPI) investigation with the FUN3D and USM3D flow solvers. CAWAPI was established to study the F-16XL, because it provides a unique opportunity to fuse fight test, wind tunnel test, and simulation to understand the aerodynamic features of swept wings. The high-lift performance of the cranked-arrow wing planform is critical for recent and past supersonic transport design concepts. Simulations of the low speed high angle of attack Flight Condition 25 are compared: Detached Eddy Simulation (DES), Modi ed Delayed Detached Eddy Simulation (MDDES), and the Spalart-Allmaras (SA) RANS model. Iso- surfaces of Q criterion show the development of coherent primary and secondary vortices on the upper surface of the wing that spiral, burst, and commingle. SA produces higher pressure peaks nearer to the leading-edge of the wing than flight test measurements. Mean DES and MDDES pressures better predict the flight test measurements, especially on the outer wing section. Vorticies and vortex-vortex interaction impact unsteady surface pressures. USM3D showed many sharp tones in volume points spectra near the wing apex with low broadband noise and FUN3D showed more broadband noise with weaker tones. Spectra of the volume points near the outer wing leading-edge was primarily broadband for both codes. Without unsteady flight measurements, the flight pressure environment can not be used to validate the simulations containing tonal or broadband spectra. Mean forces and moment are very similar between FUN3D models and between USM3D models. Spectra of the unsteady forces and moment are broadband with a few sharp peaks for USM3D.

Park, Michael A.↗
NASA NTRS1963

PARAWING AERODYNAMICS

Application of the tension structure concept for flexible wings to be used in spacecraft recovery and landing, emphasizing para-wing aerodynamics

FLEXIBLE WING↗
NASA NTRS1992

Integrated aerodynamic-structural-control wing design

The aerodynamic-structural-control design of a forward-swept composite wing for a high subsonic transport aircraft is considered. The structural analysis is based on a finite-element method. The aerodynamic calculations are based on a vortex-lattice method, and the control calculations are based on an output feedback control. The wing is designed for minimum weight subject to structural, performance/aerodynamic and control constraints. Efficient methods are used to calculate the control-deflection and control-effectiveness sensitivities which appear as second-order derivatives in the control constraint equations. To suppress the aeroelastic divergence of the forward-swept wing, and to reduce the gross weight of the design aircraft, two separate cases are studied: (1) combined application of aeroelastic tailoring and active controls; and (2) aeroelastic tailoring alone. The results of this study indicated that, for this particular example, aeroelastic tailoring is sufficient for suppressing the aeroelastic divergence, and the use of active controls was not necessary.

Rais-Rohani, M.↗
NASA NTRSDate not supplied

Study of Mach 0.8 Transonic Truss-Braced Wing Aircraft Wing-Strut Interference Effects

This paper presents computational study of transonic wing-strut interference effects of the Mach 0.8 Transonic Truss-Braced Wing (TTBW) aircraft using the high-fidelity CFD solver FUN3D. The study is conducted for the wing-strut and the wing-alone configurations at design Mach number0.8 and Reynolds number14.0 ́106.The interference effects are calculated by comparing the wing aerodynamics along the spanwise direction between the wing-strut and the wing-alone configurations. The presence of the strut underneath the wing induces a suction peak on the lower surface of the wing, which causes changes in aerodynamic forces and moments. The interference effects of the Mach 0.8 TTBW aircraft are compared with the Mach 0.745 TTBW aircraft. A transonic wing-strut interference aerodynamic correction model is developed for use in a lower-fidelity tool, VSPAERO, for rapid aerodynamic analysis of the Mach 0.8 TTBW aircraft.

TTBW↗
NASA NTRS2019

Investigation of Transonic Truss-Braced Wing Aircraft Transonic Wing-Strut Interference Effects Using FUN3D

This paper presents a computational study of transonic wing-strut interference effects of Transonic Truss-Braced Wing (TTBW) aircraft using the high-fidelity CFD (Computational Fluid Dynamics) code FUN3D (Fully Unstructured Navier-Stokes Three Dimensional). The study is conducted for the wing-strut and the wing-alone configurations at different Mach numbers and Reynolds numbers. The interference effects are calculated by comparing the wing aerodynamics along the spanwise direction between the wing-strut and the wing-alone configurations. The presence of the strut underneath the wing induces a suction peak on the lower surface of the wing, which causes changes in aerodynamic forces and moments, as well as the aerodynamic center location. The interference effects become more pronounced as the Mach number increases. The Reynolds number has less impact on the interference effects. A transonic wing-strut interference aerodynamic correction method is developed for use in a lower-fidelity tool, VSPAERO [a vortex lattice flow solver], coupled to a finite-element model for rapid flutter analysis.

Xiong, Juntao↗