Search NASA⌕ Search

SEARCH · Search NASA

Results for “Climate Model Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Determining the impact of a severe dry to wet transition on watershed hydrodynamics in California, USA with an integrated hydrologic model

With the onset of climate change, regions relied upon for water supply are increasingly subject to end-member fluctuations between periods of severe drought followed by extreme precipitation. The impacts of these extreme conditions on watershed hydrodynamics in water-resource sensitive regions such as California are unknown despite their great importance for resilience and water management purposes. Understanding these impacts requires high-resolution physically based models to capture sharp variations of topography, land use, wetting fronts, etc. Here, an integrated hydrologic model was used in a high-performance computing framework to study the complex nonlinear dynamics occurring at a representative Californian watershed. The Cosumnes Watershed, one of the last major rivers in California without a dam, offers a rare opportunity to isolate the effects of water management from climate extremes. Here, we show model validation with comparisons between model outputs and local measurements in addition to various satellite-based products including (1) Snow Water Equivalent (SWE) with Snow Data Assimilation System (SNODAS) and a reconstruction method by Bair and co-authors, (2) soil moisture with Soil Moisture Active Passive (SMAP), and (3) evapotranspiration (ET) with Mapping Evapotranspiration at high Resolution with Internalized Calibration (METRIC). To assess changes in hydrodynamic behavior during climate extremes and their transitions, a simulation spanning a recent drought followed by the highest precipitation year on record (2015–2017) is discussed. From these simulations, we are able to highlight regions that are the most sensitive to climate extremes, which depend on many factors including hydrologic connectivity, geology and topography. These analyses provide a better understanding of the physical phenomena occurring in the watershed, strengthening our knowledge of how the system may respond to extreme conditions which might become the “new normal.”

54 ENVIRONMENTAL SCIENCES↗

Mapping Post-Climate Change Biogeographical Regions with Deep Latent Variable Models

Forecasting future changes to biodiversity due to shifts in climate is challenging due to nonlinear interactions between species as recorded in their presence/absence data. This work proposes using variational autoencoders with environmental covariates to identify low-dimensional structure in species’ joint co-occurrence patterns and leveraging this simplified representation to provide multivariate predictions of their habitat extent under future climate scenarios. We pursue a latent space clustering approach to map biogeographical regions of frequently co-occurring species and apply this methodology to a dataset from northern Belgium, generating predictive maps illustrating how these regions may expand or contract with changing temperature under a future climate scenario.

Krapu, Chris↗

Study of Multi-Scale Cloud Processes Over the Tropical Western Pacific Using Cloud-Resolving Models Constrained by Satellite Data

Clouds in the tropical western Pacific are an integral part of the large scale environment. An improved understanding of the multi-scale structure of clouds and their interactions with the environment is critical to the ARM (Atmospheric Radiation Measurement) program for developing and evaluating cloud parameterizations, understanding the consequences of model biases, and providing a context for interpreting the observational data collected over the ARM Tropical Western Pacific (TWP) sites. Three-dimensional cloud resolving models (CRMs) are powerful tools for developing and evaluating cloud parameterizations. However, a significant challenge in using CRMs in the TWP is that the region lacks conventional data, so large uncertainty exists in defining the large-scale environment for clouds. This project links several aspects of the ARM program, from measurements to providing improved analyses, and from cloud-resolving modeling to climate-scale modeling and parameterization development, with the overall objective to improve the representations of clouds in climate models and to simulate and quantify resolved cloud effects on the large-scale environment. Our objectives will be achieved through a series of tasks focusing on the use of the Weather Research and Forecasting (WRF) model and ARM data. Our approach includes: - Perform assimilation of COSMIC GPS radio occultation and other satellites products using the WRF Ensemble Kalman Filter assimilation system to represent the tropical large-scale environment at 36 km grid resolution. This high-resolution analysis can be used by the community to derive forcing products for single-column models or cloud-resolving models. - Perform cloud-resolving simulations using WRF and its nesting capabilities, driven by the improved regional analysis and evaluate the simulations against ARM datasets such as from TWP-ICE to optimize the microphysics parameters for this region. A cirrus study (Mace and co-authors) already exists for TWP-ICE using satellite and ground-based observations. - Perform numerical experiments using WRF to investigate how convection over tropical islands in the Maritime Continent interacts with large-scale circulation and affects convection in nearby regions. - Evaluate and apply WRF as a testbed for GCM cloud parameterizations, utilizing the ability of WRF to run on multiple scales (from cloud resolving to global) to isolate resolution and physics issues from dynamical and model framework issues. Key products will be disseminated to the ARM and larger community through distribution of data archives, including model outputs from the data assimilation products and cloud resolving simulations, and publications.

54 ENVIRONMENTAL SCIENCES↗

Assessment of rainfall variability and future change in Brazil across multiple timescales

Abstract Rainfall variability change under global warming is a crucial issue that may have a substantial impact on society and the environment, as it can directly impact biodiversity, agriculture, and water resources. Observed precipitation trends and climate change projections over Brazil indicate that many sectors of society are potentially highly vulnerable to the impacts of climate change. The purpose of this study is to assess model projections of the change in rainfall variability at various temporal scales over sub‐regions of Brazil. For this, daily data from 30 CMIP5 models for historical (1900–2005) and future (2050–2100) experiments under a high‐emission scenario are used. We assess the change in precipitation variability, applying a band‐pass filter to isolate variability on daily, weekly, monthly, intra‐seasonal, and El Nino Southern Oscillation (ENSO) time scales. For historical climate, simulated precipitation is evaluated against observations to establish model reliability. The results show that models largely agree on increases in variability on all timescales in all sub‐regions, except on ENSO timescales where models do not agree on the sign of future change. Brazil will experience more rainfall variability in the future that is, drier or more frequent dry periods and wetter wet periods on daily, weekly, monthly, and intra‐seasonal timescales, even in sub‐regions where future changes in mean rainfall are currently uncertain. This may provide useful information for climate change adaptation across, for example, the agriculture and water resource sectors in Brazil.

Alves, Lincoln M.↗

An Enhanced Engineering Perspective of Global Climate Systems and Statistical Formulation of Terrestrial CO2 Exchanges

This paper designs a comprehensive approach based on the engineering machine/system concept, to model, analyze, and assess the level of CO2 exchange between the atmosphere and terrestrial ecosystems, which is an important factor in understanding changes in global climate. The focus of this article is on spatial patterns and on the correlation between levels of CO2 fluxes and a variety of influencing factors in eco-environments. The engineering/machine concept used is a system protocol that includes the sequential activities of design, test, observe, and model. This concept is applied to explicitly include various influencing factors and interactions associated with CO2 fluxes. To formulate effective models of a large and complex climate system, this article introduces a modeling technique that will be referred to as Stochastic Filtering Analysis of Variance (SFANOVA). The CO2 flux data observed from some sites of AmeriFlux are used to illustrate and validate the analysis, prediction and globalization capabilities of the proposed engineering approach and the SF-ANOVA technology. The SF-ANOVA modeling approach was compared to stepwise regression, ridge regression, and neural networks. The comparison indicated that the proposed approach is a valid and effective tool with similar accuracy and less complexity than the other procedures.

54 ENVIRONMENTAL SCIENCES↗

High-resolution Hindcasts for U.S. Wave Energy Resource Characterization

The marine and hydrokinetic (MHK) industry is at an early stage of development and has the potential to play a significant role in diversifying the U.S. energy portfolio and reducing the U.S. carbon footprint. Wave energy is the largest among all the U.S. MHK energy resources, which include wave energy, ocean current, tidal-instream, ocean thermal energy conversion, and river-instream. Wave resource characterization is an essential step for regional wave energy assessments, Wave Energy Converter (WEC) project development, site selection and WEC design. The present paper provides an overview of a joint modelling effort by the Pacific Northwest National Laboratory and Sandia National Laboratories on high-resolution wave hindcasts to support the U.S. Department of Energy’s Water Power Technologies Office’s program of wave resource characterization, assessment and classifications in all US coastal regions. Topics covered include the modelling approach, model input requirements, model validation strategies, high performance computing resource requirements, model outputs and data management strategies. Examples of model setup and validation for different regions are provided along with application to development of classification systems, and analysis of regional wave climates. Lessons learned and technical challenges of the long-term, high-resolution regional wave hindcast are discussed.

Yang, Zhaoqing↗

Final report for DOE Award # DE- SC0010039*: Carbon dynamics of forest recovery under a changing climate: Forcings, feedbacks, and implications for earth system modeling

To advance understanding of C dynamics of forests globally, we compiled a new database, the Forest C database (ForC-db), which contains data on ground-based measurements of ecosystem-level C stocks and annual fluxes along with disturbance history. This database currently contains 18,791 records from 2009 sites, making it the largest and most comprehensive database of C stocks and flows in forest ecosystems globally. The tropical component of the database will be published in conjunction with a manuscript that is currently under review (Anderson-Teixeira et al., in review). Database development continues, and we hope to maintain a dynamic instance of the entire (global) database.

54 ENVIRONMENTAL SCIENCES↗

CORRIGENDUM to Figures S3-S4 of "Quasi-stationary Planetary Scale Waves in Modern Climate Models"

In addition to fixing the color-coding legend, the new figures plot Fourier phase in a more easily recognizable format: polar coordinates rather than Cartesian coordinates. The same phase data is displayed—indicating the position of the first ridge to the east of the prime meridian—but the new plots avoid unphysical jumps, e.g. from +180° to -180° as longitude increases across the International Dateline. A slight disadvantage of the new format is that each hemisphere requires a separate plot. The wavenumber-1 Northern Hemisphere phase plots give, in effect, a view from above the North Pole, with Eurasia at the top and North America at the bottom. Wavenumber-1 Southern Hemisphere plots give an analogous view from the South Pole. Plots for higher wavenumbers, however, wrap around at fractions of 360° (180°, 120°, ...) and cannot be interpreted as a geographical view.

54 ENVIRONMENTAL SCIENCES↗

A Holocene East Asian winter monsoon record at the southern edge of the Gobi Desert and its comparison with a transient simulation

The East Asian winter monsoon (EAWM) exhibits significant variability on intraseasonal, interannual, and interdecadal time scales and the variability can be extended to Holocene centennial and millennial scales. Previous Holocene EAWM proxy data records, which were mostly located in Central, Eastern and Southern China, did not show a consistent Holocene EAWM history. Therefore, it is difficult to provide insights into mechanisms of the long-term winter monsoon variability on the basis of the records. Eolian sediments at the southern edge of the Gobi Desert, Western China, are sensitive to the EAWM changes and less affected by the East Asian summer monsoon due to an obstruction of the Qinghai–Tibet Plateau. Here, this paper presents a comparison between a well-dated Holocene EAWM record and coupled climate model simulations, so as to explore physical processes and influencing factors of the Holocene EAWM. Sediment samples from two Holocene eolian sedimentary sections [Huangyanghe (a) and Huangyanghe (b)] were acquired at the southern edge of the Gobi Desert. Chronologies were established based on twenty bulk organic matter AMS 14 C ages and five pollen concentrates AMS 14 C ages. Proxy data, including grain-size, total organic carbon, magnetic susceptibility and carbonate content were obtained from the two eolian sections. The grain-size standard deviation model was applied to determine components sensitive to variability of the Holocene EAWM. After a comparison of environmentally-sensitive grain-size components and proxy data, the 20–200 μm component at the Huangyanghe (a) and the 20–159 μm component at the Huangyanghe (b) section were selected as indicators of the Holocene EAWM, which show a strong early Holocene winter monsoon and a decline of the winter monsoon since the mid-Holocene. We also present equilibrium and transient simulations of the climate evolution for the Holocene using a state-of-art coupled climate model: the Community Climate System Model version 3 (CCSM3). Indices for the Holocene EAWM were calculated and are consistent with the reconstructed Holocene EAWM intensity. The simulations indicate that orbital forcing effects on the land-sea temperature and sea level pressure contrast can account for the observed EAWM trends. Other forcings that were present in the early Holocene, including the remnant Laurentide ice sheet and meltwater forcing in the North Atlantic, were not responsible for the Holocene trends.

54 ENVIRONMENTAL SCIENCES↗

Climate Science for a Sustainable Energy Future Atmospheric Radiation Measurement Best Estimate (CSSEFARMBE)

The Climate Science for a Sustainable Energy Future (CSSEF) project is working to improve the representation of the hydrological cycle in global climate models, critical information necessary for decision-makers to respond appropriately to predictions of future climate. In order to accomplish this objective, CSSEF is building testbeds to implement uncertainty quantification (UQ) techniques to objectively calibrate and diagnose climate model parameterizations and predictions with respect to local, process-scale observations. In order to quantify the agreement between models and observations accurately, uncertainty estimates on these observations are needed. The DOE Atmospheric Radiation Measurement (ARM) program takes atmospheric and climate related measurements at three permanent locations worldwide. The ARM VAP called the ARM Best Estimate (ARMBE) [Xie et al., 2010] collects a subset of ARM observations, performs quality control checks, averages them to one hour temporal resolution, and puts them in a standard format for ease of use by climate modelers. ARMBE has been widely used by the climate modeling community as a summary product of many of the ARM observations. However, the ARMBE product does not include uncertainty estimates on the data values. Thus, to meet the objectives of the CSSEF project and enable better use of this data with UQ techniques, we created the CSSEFARMBE data set. Only a subset of the variables contained in ARMBE is included in CSSEFARMBE. Currently only surface meteorological observations are included, though this may be expanded to include other variables in the future. The CSSEFARMBE VAP is produced for all extended facilities at the ARM Southern Great Plains (SGP) site that contain surface meteorological equipment. This extension of the ARMBE data set to multiple facilities at SGP allows for better comparison between model grid boxes and the ARM point observations. In the future, CSSEFARMBE may also be created for other ARM sites. As each site has slightly different instrumentation, this will require additional development to understand the uncertainty characterization associated with instrumentation at those sites. The uncertainty assignment process is implemented into the ARM program’s new Integrated Software Development Environment (ISDE) so that many of the key steps can be used in the future to screen data based on ARM Data Quality Reports (DQRs), propagate uncertainties when transforming data from one time scale into another, and convert names and units into NetCDF Climate and Forecast (CF) standards. These processes are described in more detail in the following sections.

atmospheric↗

Estimating coccidioidomycosis endemicity while accounting for imperfect detection using spatio - temporal occupancy modeling

Coccidioidomycosis, or Valley fever, is an infectious disease caused by inhaling Coccidioides fungal spores. Incidence has risen in recent years, and it is believed the endemic region for Coccidioides is expanding in response to climate change. While Valley fever case data can help us understand trends in disease risk, using case data as a proxy for Coccidioides endemicity is not ideal because case data suffers from imperfect detection, including false positives (e.g., travel-related cases reported outside of endemic area) and false negatives (e.g., misdiagnosis or underreporting). Here we proposed a Bayesian, spatio-temporal occupancy model to relate monthly, county-level presence/absence data on Valley fever cases to latent endemicity of Coccidioides, accounting for imperfect detection. We used our model to estimate endemicity in the western United States. We estimated high probability of endemicity in southern California, Arizona, and New Mexico, but also in regions without mandated reporting, including western Texas, eastern Colorado, and southeastern Washington. We also quantified spatio-temporal variability in detectability of Valley fever, given an area is endemic to Coccidioides. We estimated an inverse relationship between lagged 3- and 9-month precipitation and case detection, and a positive association with agriculture. This work can help inform public health surveillance needs and identify areas that would benefit from mandatory case reporting.

60 APPLIED LIFE SCIENCES↗

A simple model for estimating changes in rainfall erosivity caused by variations in rainfall patterns

Highlights: • A simple relationship was developed for predicting daily erosivity in changing climates. • The relationship depends on precipitation amount and maximum 0.5-h intensity I{sub 0.5} . • The relationship was calibrated using measured climate data and had a R{sup 2} of 0.99. • Simulated daily and annual erosivities were predicted with a R{sup 2} of 0.99 using the relationship. • The relationship was tested using I{sub 24}, showing a R{sup 2} of 0.78 for the simulated data. A major challenge when coupling soil loss models with precipitation forecasts from Global Circulation Models (GCMs) is that their time resolutions do not generally agree. Precipitation forecasts from GCM must be scaled down; however, the distribution of the rainfall intensity, which can affect soil loss as much as precipitation amounts, is usually not considered in this process. Therefore, the objective of this study was to develop a statistical equation for computing event-based rainfall erosivity under changing precipitation patterns using the least amount of information possible. For this purpose, an empirical equation for predicting event-based rainfall erosivity was developed using the product of the total precipitation P and the maximum 0.5-h rainfall intensity, I{sub 0.5}. This equation was calibrated using measured precipitation data from 28 sites in Central Chile and then tested with simulated data with different rainfall patterns from the CLIGEN (CLImate GENerator) weather generator. More than 53,000 rainfall events were analyzed, where the equation consistently provided R{sup 2} values of 0.99 for every dataset used, revealing its robustness when used in potential climate change scenarios in the study site. However, because computing I{sub 0.5} requires estimating precipitation at a high time resolution, the relationship was recalibrated and tested using 1 through 24-h maximum rainfall intensities. Using these intensities, the equation provided erosivity estimates with R{sup 2} ranging from 0.78 to 0.99, where better results were obtained as the resolution of the data increased. This study provides the methodology for building and testing the proposed equation and discusses its advantages and limitations.

54 ENVIRONMENTAL SCIENCES↗

Web tools concerning performance analysis and planning support for solar energy plants starting from remotely sensed optical images

We present innovative web tools, developed also in the frame of the FP7 ENDORSE (ENergy DOwnstReam SErvices) project, for the performance analysis and the support in planning of solar energy plants (PV, CSP, CPV). These services are based on the combination between the detailed physical model of each part of the plants and the near real-time satellite remote sensing of incident solar irradiance. Starting from the solar Global Horizontal Irradiance (GHI) data provided by the Monitoring Atmospheric Composition and Climate (GMES-MACC) Core Service and based on the elaboration of Meteosat Second Generation (MSG) satellite optical imagery, the Global Tilted Irradiance (GTI) or the Beam Normal Irradiance (BNI) incident on plant's solar PV panels (or solar receivers for CSP or CPV) is calculated. Combining these parameters with the model of the solar power plant, using also air temperature values, we can assess in near-real-time the daily evolution of the alternate current (AC) power produced by the plant. We are therefore able to compare this satellite-based AC power yield with the actually measured one and, consequently, to readily detect any possible malfunctions and to evaluate the performances of the plant (so-called “Controller” service). Besides, the same method can be applied to satellite-based averaged environmental data (solar irradiance and air temperature) in order to provide a Return on Investment analysis in support to the planning of new solar energy plants (so-called “Planner” service). This method has been successfully applied to three test solar plants (in North, Centre and South Italy respectively) and it has been validated by comparing satellite-based and in-situ measured hourly AC power data for several months in 2013 and 2014. The results show a good accuracy: the overall Normalized Bias (NB) is − 0.41%, the overall Normalized Mean Absolute Error (NMAE) is 4.90%, the Normalized Root Mean Square Error (NRMSE) is 7.66% and the overall Correlation Coefficient (CC) is 0.9538. The maximum value of the Normalized Absolute Error (NAE) is about 30% and occurs for time periods with highly variable meteorological conditions. - Highlights: • We developed an online service (Controller) dedicated to solar energy plants real-time monitoring • We developed an online service (Planner) that supports the planning of new solar energy plants • The services are based on the elaboration of satellite optical imagery in near real-time • The validation with respect to in-situ measured hourly AC power data for three test solar plants shows good accuracy • The maximum value of the Normalized Absolute Error is about 30% and occurs for highly variable meteorological conditions.

14 SOLAR ENERGY↗

Complementing Dynamical Downscaling With Super‐Resolution Convolutional Neural Networks

Despite advancements in Artificial Intelligence (AI) methods for climate downscaling, significant challenges remain for their practicality in climate research. Current AI-methods exhibit notable limitations, such as limited application in downscaling Global Climate Models (GCMs), and accurately representing extremes. To address these challenges, we implement an AI-based methodology using super-resolution convolutional neural networks (SRCNN), trained and evaluated on 40 years of daily precipitation data from a reanalysis and a high-resolution dynamically downscaled counterpart. The dynamical downscaled simulations, constrained using spectral nudging, enable the replication of historical events at a higher resolution. This allows the SRCNN to emulate dynamical downscaling effectively. Modifications, such as incorporating elevation data and data pre-processing enhances overall model performance, while using exponential and quantile loss functions improve the simulation of extremes. Our findings show SRCNN models efficiently and skillfully downscale precipitation from GCMs. Future work will expand this methodology to downscale additional variables for future climate projections.

54 ENVIRONMENTAL SCIENCES↗

Advancing a Model-Validated Statistical Method for Decomposing the Key Oceanic Drivers of Regional Climate: Focus on Northern and Tropical African Climate Variability in the Community Earth System Model (CESM)

This study advances the practicality and stability of the traditional multivariate statistical method, generalized equilibrium feedback assessment (GEFA), for decomposing the key oceanic drivers of regional atmospheric variability, especially when available data records are short. An advanced stepwise GEFA methodology is introduced, in which unimportant forcings within the forcing matrix are eliminated through stepwise selection. Method validation of stepwise GEFA is performed using the CESM, with a focused application to northern and tropical Africa (NTA). First, a statistical assessment of the atmospheric response to each primary oceanic forcing is carried out by applying stepwise GEFA to a fully coupled control run. Then, a dynamical assessment of the atmospheric response to individual oceanic forcings is performed through ensemble experiments by imposing sea surface temperature anomalies over focal ocean basins. Finally, to quantify the reliability of stepwise GEFA, the statistical assessment is evaluated against the dynamical assessment in terms of four metrics: the percentage of grid cells with consistent response sign, the spatial correlation of atmospheric response patterns, the area-averaged seasonal cycle of response magnitude, and consistency in associated mechanisms between assessments. In CESM, tropical modes, namely El Niño–Southern Oscillation and the tropical Indian Ocean Basin, tropical Indian Ocean dipole, and tropical Atlantic Niño modes, are the dominant oceanic controls of NTA climate. In complementary studies, stepwise GEFA is validated in terms of isolating terrestrial forcings on the atmosphere, and observed oceanic and terrestrial drivers of NTA climate are extracted to establish an observational benchmark for subsequent coupled model evaluation and development of process-based weights for regional climate projections.

54 ENVIRONMENTAL SCIENCES↗