Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coating processes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Atomic-scale analyses of Nb 3 Sn on Nb prepared by vapor diffusion for superconducting radiofrequency cavity applications: a correlative study

We report on atomic-scale analyses of the microstructure of an Nb 3 Sn coating on Nb, prepared by a vapor diffusion process for superconducting radiofrequency (SRF) cavity applications using transmission electron microscopy, electron backscatter diffraction and first-principles calculations. Epitaxial growth of Nb 3 Sn on a Nb substrate is found and four types of orientation relationships (ORs) at the Nb 3 Sn/Nb interface are identified by electron diffraction or high-resolution scanning transmission electron microscopy (HR-STEM) analyses. Thin Nb 3 Sn grains are observed in regions with a low Sn flux and they have a specific OR: Nb 3 Sn (1$\bar{2}$0) //Nb ($\bar{1}$11) and Nb 3 Sn (002) //Nb (0$\bar{1}$1) The Nb 3 Sn/Nb interface of thin grains has a large lattice mismatch, 12.3%, between Nb(0$\bar{1}$1) and Nb 3 Sn (002) and a high density of misfit dislocations as observed by HR-STEM. Based on our microstructural analyses of the thin grains, we conclude that the thin regions are probably a result of a slow interfacial migration with this particular OR. The Sn-deficient regions are seen to form initially at the Nb 3 Sn/Nb interface and remain in the grains due to the slow diffusion of Sn in bulk Nb 3 Sn. The formation of Sn-deficient regions and the effects of interfacial energies on the formation of Sn-deficient regions at different interfaces are estimated by first-principles calculations. The finding of ORs at the Nb 3 Sn/Nb interface provides important information about the formation of imperfections in Nb 3 Sn coatings, such as large thin-regions and Sn-deficient regions, which are critical to the performance of Nb 3 Sn SRF cavities for accelerators.

43 PARTICLE ACCELERATORS↗

High-κ TiO{sub 2} thin film prepared by sol-gel spin-coating method

High-k TiO{sub 2} thin film on p-type silicon substrate was fabricated by a combined sol-gel and spin coating method. Thus deposited titania film had anatase phase with a small grain size of 16 nm and surface roughness of ≅ 0.6 nm. The oxide capacitance (C{sub ox}), flat band capacitance (C{sub FB}), flat band voltage (V{sub FB}), oxide trapped charge (Q{sub ot}), calculated from the high frequency (1 MHz) C-V curve were 0.47 nF, 0.16 nF, − 0.91 V, 4.7x10{sup −12} C, respectively. As compared to the previous reports, a high dielectric constant of 94 at 1 MHz frequency was observed in the devices investigated here and an equivalent oxide thickness (EOT) was 4.1 nm. Dispersion in accumulation capacitance shows a linear relationship with AC frequencies. Leakage current density was found in acceptable limits (2.1e-5 A/cm{sup 2} for −1 V and 5.7e-7 A/cm{sup 2} for +1 V) for CMOS applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of nanocrystalline ZnO:Al films by sol-gel spin coating method

Nanocrystalline ZnO films doped with aluminium by sol-gel spin coating method have been investigated using optical transmittance UV-Vis and X-ray diffraction (X-RD) measurements. ZnO films were prepared using zinc acetate dehydrate (Zn(CH{sub 3}COO){sub 2}@@‡2H{sub 2}O), ethanol, and diethanolamine (DEA) as a starting material, solvent, and stabilizer, respectively. For doped films, AlCl{sub 3} was added to the mixture. The ZnO:Al films were deposited on a transparent conductive oxide (TCO) substrate using spin coating technique at room temperature with a rate of 3000 rpm in 30 sec. The deposited films were annealed at various temperatures from 400°C to 600°C during 60 minutes. The transmittance UV-Vis measurement results showed that after annealing at 400°C, the energy band gap profile of nanocrystalline ZnO:Al film was a blue shift. This indicated that the band gap of ZnO:Al increased after annealing due to the increase of crystalline size. As the annealing temperature increased the bandgap energy was a constant. In addition to this, there was a small oscillation occurring after annealing compared to the as–grown samples. In the case of X-RD measurements, the crystalinity of the films were amorphous before annealing, and after annealing the crystalinity became enhance. Also, X-RD results showed that structure of nanocrystalline ZnO:Al films were hexagonal polycrystalline with lattice parameters are a = 3.290 Å and c = 5.2531 Å.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Potentiodynamic studies of Ni-P-TiO{sub 2} nano-composited coating on the mild steel deposited by electroless plating method

Now a days, corrosion studies are important for reducing the wastage of metals. The importance of corrosion studies is two folds i.e. first is economic, including the reduction of material losses resulting from the wasting away or sudden failure of materials and second is conservation Electroless process is an autocatalytic reduction method in which metallic ions are reduced in the solution. Nanocomposite coatings of Ni-P-TiO{sub 2} on mild steel are deposited by varying volume of TiO{sub 2} nano-powder by electroless method from Ni-P plating bath containing Nickel Sulphate as a source of nickel ions, sodium hypophosphite as the reducing agent, lactic acid as a complexing agents and TiO{sub 2} nano powder. Electroless Ni-P-TiO{sub 2} coating have been widely used in the chemical process industries, mechanical industries, electronic industries and chloroalkali industries due to their excellent corrosion with mechanical properties. In the present work, deposition of Ni-P alloy coating and Ni-P-TiO{sub 2} nanocomposited coatings were done on the mild steel and corrosion properties were studied with Potentio-dynamic polarization measurements method in 3.5 wt% sodium chloride solution. It showed in the experiments that Ni-P-TiO{sub 2} nanocomposited coating has better corrosion resistance as comparedthan Ni-P alloy coating. Morphological studies were done by field emission scanning electron microscopy (FESEM), energy–dispersive analysis of X-ray (EDAX) and X-ray diffraction (XRD). These studies confirmed the deposition of Ni-P alloy coating and Ni-P-TiO{sub 2} nanocomposited coating.

36 MATERIALS SCIENCE↗

Ceramic thick film humidity sensor based on MgTiO{sub 3} + LiF

Graphical abstract: - Highlights: • The fabricated sensor based on MgTiO{sub 3} + LiF materials used the spin coating technology. • The response time is 70 s to detect variation between 5 and 95% relative humidity. • The addition of Scleroglucan controls the viscosity and decreases the roughness of thick film surface. • This humidity sensor is a promising, low-cost, high-quality, reliable ceramic films, that is highly sensitive to humidity. - Abstract: The feasibility of humidity sensor, consisting of a thick layer of MgTiO{sub 3}/LiF materials on alumina substrate, was studied. The thermal analysis TGA-DTGA and dilatometric analysis worked out to confirm the sintering temperature. An experimental plan was applied to describe the effects of different parameters in the development of the thick film sensor. Structural and microstructural characterizations of the developed thick film were made. Rheological study with different amounts of a thickener (scleroglucan “sclg”), showing the behavior variation, as a function of sclg weight % was illustrated and rapprochement with the results of thickness variation as a function of angular velocity applied in the spin coater. The electrical and dielectric measurements confirmed the sensitivity of the elaborated thick film against moisture, along with low response time.

36 MATERIALS SCIENCE↗

Synthesis and electrochemical characterizations of nano-La{sub 2}O{sub 3}-coated nanostructure LiMn{sub 2}O{sub 4} cathode materials for rechargeable lithium batteries

LiMn{sub 2}O{sub 4} spinel cathode materials were coated with 1.0, 2.0 and 3.0 wt.% of La{sub 2}O{sub 3} by polymeric process, followed by calcinations at 850 {sup o}C for 6 h in air. The surface coated LiMn{sub 2}O{sub 4} cathode materials were physically characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy and XPS. XRD patterns of La{sub 2}O{sub 3}-coated LiMn{sub 2}O{sub 4} revealed that the coating did not affect the crystal structure and space group Fd3m of the cathode materials, compared to the uncoated LiMn{sub 2}O{sub 4}. The surface morphology and particle agglomeration were investigated using scanning electron microscopy and the TEM image showed a compact coating layer on the surface of the core materials that had average thickness of about 100 nm. XPS data illustrated that the La{sub 2}O{sub 3} was completely coated over the surface of the LiMn{sub 2}O{sub 4} core cathode materials. The galvanostatic charge and discharge of the uncoated and La{sub 2}O{sub 3}-coated LiMn{sub 2}O{sub 4} cathode materials were carried out in the potential range of 3.0 and 4.5 V at 30 {sup o}C and 60 {sup o}C. Among them, 2.0 wt.% of La{sub 2}O{sub 3}-coated spinel LiMn{sub 2}O{sub 4} cathode has improved the structural stability, high reversible capacity and excellent electrochemical performances of the rechargeable lithium batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, magnetic and optical properties of a dilute magnetic semiconductor based on Ce{sub 1−x}Co{sub x}O{sub 2} thin film grown on LaAlO{sub 3}

Highlights: • Co doped CeO{sub 2} was grown on LaAlO{sub 3} (0 0 1) via a modified sol–gel spin-coating technique. • The concentration of the Co ions was varied from 1 to 15 at.%. • The incorporation of 5 at.% of Mn ions was found to provide formation of exceptionally magnetic moment. • This amount demonstrated a giant magnetic moment of 1.09 μ{sub B}/Co. • This amount reduced the optical band gap and enhanced the optical performance. - Abstract: The enhancement of the room temperature ferromagnetism and optical properties of the dilute magnetic metal oxides is a crucial clue to construct spin-based optoelectronic devices. In this work, Ce{sub 1−x}Co{sub x}O{sub 2} (0.01 ≤ x ≤0.15) thin films were prepared via ethylene glycol modified sol–gel spin coating technique on the LaAlO{sub 3} (0 0 1) substrate to enhance their room temperature ferromagnetism and optical properties. The structures, magnetic and optical properties of the prepared films were characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, SQUID magnetometer, X-ray photoelectron spectroscopy and UV–vis spectrophotometer. The results demonstrated that a single phase cubic structure was formed, implying the substitution of Co ions into the Ce ions sites. The prepared films showed room temperature ferromagnetism with saturation magnetic moment of 1.09 μ{sub B}/Co was achieved for 5 at.% Co-doped CeO{sub 2}. This film exhibited high optical transparency of 85% and low optical band energy gap of 3.39 eV. The improved magnetic and optical properties are argued to the increase of the density of the oxygen vacancies into the cerium oxide crystal structure due to the incorporation of Co ions.

36 MATERIALS SCIENCE↗

Characterizing the combined impact of nucleation-driven precipitation and secondary passivation on carbon mineralization

The evolution of mineral reactive surface area is one of the primary phenomena controlling the progression and extent of mineral carbonation. The CO 2 mineralization begins with nucleation of crystals that provide initial surface area for subsequent growth of the mineral. However, many reactive transport models (RTMs) for CO 2 mineralization do not include the nucleation process. The few RTMs that do include it are yet to be validated against experimental data. Similarly, many RTMs ignore passivating effects of the secondary mineral, which coats the surface of the dissolving mineral, slow down the reaction process, and reduce the total extent of carbonation. Furthermore, the combined impact of nucleation and passivation on carbon mineralization is yet to be properly characterized. In this study, we consider the coupled effects of passivation and nucleation on the mineralization extent. The nucleation-driven precipitation model relies on the formation of nuclei to provide a surface area for crystal growth, while a new model is proposed to account for passivation effects. Our analysis shows that (i) omission of nucleation leads to overestimation of extent of mineralization, and (ii) omission of passivation leads to overestimation of host rock reactivity. The model was evaluated via comparison with CO 2 mineralization data from the literature and models that ignore these processes. We observed that including nucleation and passivation lead to closer predictions of the CO 2 mineralization extent. Therefore, this study highlights the importance of including the coupled nucleation-driven precipitation and secondary passivation in RTMs. Here, the findings from the study can be applied in various scientific and engineering applications such as petroleum production, cement carbonation, CO 2 sequestration, chemical weathering, and concrete degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluating the Upset Protrusion Joining (UPJ) Method to Join magnesium Castings to Dissimilar Metals

This presentation discusses advantages and best practices for incorporating magnesium in automotive component applications to achieve substantial mass reduction, as well as some of the key challenges with respect to joining, coating, and galvanic corrosion, before providing an introduction and status update of the U.S. Department of Energy and Department of Defense jointly sponsored Upset Protrusion Joining (UPJ) process development and evaluation project. This update includes sharing performance results of a benchmark evaluation of the self-pierce riveting (SPR) process for joining dissimilar magnesium (Mg) to aluminum (Al) materials in four unique coating configurations before introducing the UPJ concept and comparing performance results of the joints made with the UPJ process to those made with the SPR process.

36 MATERIALS SCIENCE↗

Time-Dependent 600 °C Post-Weld Heat Treatment Response of Laser-Wire-Directed Energy Deposited Austenitic Stainless Steel Claddings on Carbon Steel

Austenitic stainless steel overlay claddings are often used to protect nuclear reactor pressure vessels from corrosion. Arc welding processes are traditionally employed, which require a high heat input to bond the dissimilar metals, creating a large heat-affected zone and high residual stress that demands a lengthy stress-relieving post-weld heat treatment, up to 48 hours. High energy beam (e.g., laser, electron beam) directed energy deposition-based overlay cladding processes show promise for fabricating claddings with superior performance compared to arc welded ones because of their localized heat input; however, their necessity and time of post-weld heat treatment are currently unclear. In this research, we investigate the time dependence of a 600 C stress-relieving post-weld heat treatment of austenitic stainless steel clad on low carbon steel by laser-wire-directed energy deposition, comparing the microstructure and mechanical properties of the as-fabricated condition to 2-, 10-, and 48-hour heat treatment times. Diffusion simulations and microscopy show a gradual carburization of the stainless steel cladding and decarburization of the heat-affected zone/base metal. Nanoindentation testing shows up to a 1.8–2.69 embrittlement in the cladding and a 0.33 to 0.69 softening in the heat-affected zone after the 48-hour post-weld heat treatment. Tensile testing of the cladding composites reveals that increasing post-weld heat treatment time raises clad cracking susceptibility due to intergranular carbide formation and shows that laser-wire-directed energy deposition claddings may not require post-weld heat treatment.

Coating↗

ZrN coatings deposited by high power impulse magnetron sputtering and cathodic arc techniques

Zirconium nitride (ZrN) coatings were deposited on 1 μm finish high speed steel and 316L stainless steel test coupons. Cathodic Arc (CA) and High Power Impulse Magnetron Sputtering (HIPIMS) + Unbalanced Magnetron Sputtering (UBM) techniques were utilized to deposit coatings. CA plasmas are known to be rich in metal and gas ions of the depositing species as well as macroparticles (droplets) emitted from the arc sports. Combining HIPIMS technique with UBM in the same deposition process facilitated increased ion bombardment on the depositing species during coating growth maintaining high deposition rate. Prior to coating deposition, substrates were pretreated with Zr{sup +} rich plasma, for both arc deposited and HIPIMS deposited coatings, which led to a very high scratch adhesion value (L{sub C2}) of 100 N. Characterization results revealed the overall thickness of the coatings in the range of 2.5 μm with hardness in the range of 30–40 GPa depending on the deposition technique. Cross-sectional transmission electron microscopy and tribological experiments such as dry sliding wear tests and corrosion studies have been utilized to study the effects of ion bombardment on the structure and properties of these coatings. In all the cases, HIPIMS assisted UBM deposited coating fared equal or better than the arc deposited coatings, the reasons being discussed in this paper. Thus H+U coatings provide a good alternative to arc deposited where smooth, dense coatings are required and macrodroplets cannot be tolerated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fission Products Distribution in TRISO Coated Fuel Particles Irradiated to 3.22 x 1021 n/cm2 Fast Fluence at 1092°C

Mechanisms by which fission products (especially Ag) migrate across the intact coating layers of tristructural isotropic (TRISO) coated fuel particles designed for next generation nuclear reactors have been the subject of numerous studies but remain poorly understood. This paper presents results obtained from the electron microscopic examination of selected irradiated tristructural isotropic (TRISO) coated particles (CPs) taken from fuel Compact 3-1-1 irradiated in Advanced Gas Reactor (AGR) experiment AGR-1. Studying this particles are of specific interest as it was fabricated using a different carrier gas composition ratio for the SiC layer deposition compared with the baseline fuel coated particles reported previously. These fabrication parameters are expected to reduce defects in the SiC layers resulting from uranium dispersion and potentially reducing the SiC layer permeability for metallic fission products. Basic scanning electron microscopy (SEM) and SEM montage investigations of the particles indicate that the number density of fission products in the inner pyrolytic carbon (IPyC) layer is far higher than that in the SiC layer, and that the number density of fission products in the SiC layer is far lower than the corresponding value for compacts with baseline fuel. Preliminary comparative fission product distribution montages suggest that the SiC layers of particles in Compact 1-3-1 are less permeable to fission products than those in compacts with baseline fuel. Transmission electron microscopy (TEM) samples were sectioned by focused ion beam (FIB) technique from the IPyC layer, the SiC layer and the IPyC-SiC interlayer of the particle. Detailed TEM and scanning transmission electron microscopy (STEM) coupled with energy dispersive X-ray spectroscopy (EDS) or electron energy loss spectroscopy (EELS) were performed to identify fission products and characterize their distribution across the IPyC and the SiC layers. Based on the distribution of the fission products, transport mechanisms are discussed and proposed, with emphasis placed on Ag. Our study contributes to enhancing the understanding of fission product transport mechanisms in TRISO coated fuel particles with SiC layer possessing reduced concentration of processing defects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fabrication of CuAl{sub 1−x}M{sub x}O{sub 2} (M = Fe, Cr)/Ni film delafossite compounds using spin coating and their microstructure and dielectric constant

The discovery of delafossite compound has encouraged more rapid technological developments particularly in transparent electronic devices. Copper oxide-based transparent thin films delafossite semiconductor recently give much attention in the field of optoelectronic technology, after the discovery of p-type CuAlO{sub 2}. The potential applications of a p-type semiconductor transparent conductive oxides (TCO) have been applied in broad field of optoelectronics. To explore a broad physical properties interms of magnetic conducting subtitution is understudied. In this work we report the fabrication of delafossite film on Ni substrate and their characterization of CuAl{sub 1−x}M{sub x}O{sub 2} delafossite compounds doped with Cr{sup 3+} and Fe{sup 3+} from the raw material of Cu(NO{sub 3}){sub 2}@@‡3H{sub 2}O, Al(NO{sub 3}){sub 3}@@‡9H{sub 2}O, Fe(NO{sub 3}){sub 3}@@‡9H{sub 2}O and Cr(NO{sub 3}){sub 3}@@‡9H{sub 2}O. The films were prepared using spin coating through a sol-gel technique at various concentrations of x = 0, 0.03, 0.04, and 0.05 for chromium and x = 0, 0.02, 0.04, 0.06, and 0.08 for iron doped. Crystal and microstructure were characterized by means of Cu-Kα Bragg-Brentano X-RD followed by High Score Plus and SEM-EDAX. The dielectric constants of the films were characterized using LCR meter. It was found that the CuAl{sub 1−x}M{sub x}O{sub 2}/Ni delafossite films were successfully fabricated. The CuAl{sub 1−x}Fe{sub x}O{sub 2} compound crystallized with lattice parameters of a = b ranged from 2.8603 Å to 2.8675 Å and c ranged from 16.9576 to 17.0763 Å. The increase of the dopant give rise to the increase of the lattice parameters. Since iron has bigger ionic radius (69 pm) than original site of Al{sup 3+} with radius of 53 pm the crystal volume lattice also increase. Further analyses of increasing volume of the crystal, as expected, affected to the decreasing of its dielectric constant. The similar trends also shown by Cr{sup 3+} doped of CuAl{sub 1−x}Cr{sub x}O{sub 2} films with smaller effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Cr doping in the microstructure, electrical and magnetic properties of In{sub 2−x}Cr{sub x}O{sub 3} system (x=0.1 and x=0.2)

In this paper a sol-gel method followed by a spin coating technique have been used to fabricate In{sub 2−x}Cr{sub x}O{sub 3} thin films with x=0.1 and 0.2. The structural analysis using an x-ray diffractometer showed that films have bixibyte cubic structure with good orientations to (222) directions. Microstructure analysis using atomic force microscope showed that sample with x=0.1 has clear pores and the particles tend to agglomerate and collect together with some holes seen on surface at x=0.2. The structure analysis using transmission electron microscope showed that the average grain size is 7.9 nm and 5.6 nm for samples x=0.1 and 0.2, respectively. The electrical measurements were carried out using Hall effect measurement system. The resistivity, carrier concentration and mobility for sample with x=0.1 is 27ohm.cm, 8.1×1016 cm{sup −3} and 1.9 cm{sup 2}V{sup −1}S{sup −1}, respectively and for higher dopant the film became insulator. The film with x=0.1 has metallic like behavior at 80-165K while semiconducting like behavior observed at 170-300K. Thermal activated conduction band and hoping conduction models have been used to estimate conducting mechanism in semiconducting part. Both samples show magnetic behavior at room temperature. The magnetic moment decreased from 6.7 emu/cm{sup 3} for x=0.1 to 2.8 emu/cm{sup 3} for x=0.2 while the coercivity increased from 85 Oe for x=0.1 to 120 Oe for x=0.2.

36 MATERIALS SCIENCE↗

DLTS analysis of amphoteric interface defects in high-TiO{sub 2} MOS structures prepared by sol-gel spin-coating

High-κ TiO{sub 2} thin films have been fabricated from a facile, combined sol – gel spin – coating technique on p and n type silicon substrate. XRD and Raman studies headed the existence of anatase phase of TiO{sub 2} with a small grain size of 18 nm. The refractive index ‘n’ quantified from ellipsometry is 2.41. AFM studies suggest a high quality, pore free films with a fairly small surface roughness of 6 Å. The presence of Ti in its tetravalent state is confirmed by XPS analysis. The defect parameters observed at the interface of Si/TiO{sub 2} were studied by capacitance – voltage (C – V) and deep level transient spectroscopy (DLTS). The flat – band voltage (V{sub FB}) and the density of slow interface states estimated are – 0.9, – 0.44 V and 5.24×10{sup 10}, 1.03×10{sup 11} cm{sup −2}; for the NMOS and PMOS capacitors, respectively. The activation energies, interface state densities and capture cross – sections measured by DLTS are E{sub V} + 0.30, E{sub C} – 0.21 eV; 8.73×10{sup 11}, 6.41×10{sup 11} eV{sup −1} cm{sup −2} and 5.8×10{sup −23}, 8.11×10{sup −23} cm{sup 2} for the NMOS and PMOS structures, respectively. A low value of interface state density in both P- and N-MOS structures makes it a suitable alternate dielectric layer for CMOS applications. And also very low value of capture cross section for both the carriers due to the amphoteric nature of defect indicates that the traps are not aggressive recombination centers and possibly can not contribute to the device operation to a large extent.

36 MATERIALS SCIENCE↗

Porous Chromatographic Materials as Substrates for Preparing Synthetic Nuclear Explosion Debris Particles

In this study, we investigated several porous chromatographic materials as synthetic substrates for preparing surrogate nuclear explosion debris particles. The resulting synthetic debris materials are of interest for use in developing analytical methods. Eighteen metals, including some of forensic interest, were loaded onto materials by immersing them in metal solutions (556 mg/L of each metal) to fill the pores, applying gentle heat (110°C) to drive off water, and then treating them at high temperatures (up to 800°C) in air to form less soluble metal species. High-boiling-point metals were uniformly loaded on spherical controlled-pore glass to emulate early fallout, whereas low-boiling-point metals were loaded on core-shell silica to represent coated particles formed later in the nuclear fallout-formation process. Analytical studies were applied to characterize solubility, material balance, and formation of recalcitrant species. Dissolution experiments indicated loading was 1.5 to 3 times higher than expected from the pore volume alone, a result attributed to surface coating. Analysis of load solutions before and after filling the material pores revealed that most metals were passively loaded; that is, solutions filled the pores without active metal discrimination. However, niobium and tin concentrations were lower in solutions after pore filling, and were found in elevated concentrations in the final products, indicating some metals were selectively loaded. High-temperature treatments caused reduced solubility of several metal species, and loss of some metals (rhenium and tellurium) because volatile species were formed. Sample preparation reproducibility was high (the inter-batch relative standard deviation was 7.8%, and the intra-batch relative standard deviation was 0.84%) indicating that this material is suitable for use as a working standard for analytical methods development. We anticipate future standardized radionuclide-loaded materials will find use in radioanalytical methods development and/or serve as a starting material for the synthesis of more complex forms of nuclear explosion debris (e.g., Trinitite).

36 MATERIALS SCIENCE↗

High Temperature Oxidation Behavior of Aluminized Haynes 230

The effect of reactive air aluminizing (RAA) on the high-temperature oxidation behavior of the H230 superalloy is studied at 850 °C for 600 hours. Mass gain values are measured and microstructure is studied by XRD, SEM, and EDX. Post oxidation mass gain for the aluminized alloy is reduced compared to wrought alloy. A three-zone microstructure of diffusion coating is observed in RAA H230. Formation and growth of alumina scale during RAA process and oxidation is attributed to the complementary roles of ß-NiAl + ?'-Ni3Al phases in the composite coating.

Rashidi, S↗

Ice nucleation activity of diesel soot particles at Cirrus relevant conditions: Effects of hydration, secondary organics coating, hydration, soot morphology, and coagulation

The role of atmospheric relevant soot particles that are processed in the atmosphere toward ice nucleation at cirrus cloud condition is poorly understood. In this study, the ice nucleating properties of diesel soot particles subjected to various physical and chemical aging treatments were investigated at temperatures ranging from -40 to -50 °C. We show that bare soot particles nucleate ice in deposition mode, but coating with secondary organics suppresses the heterogeneous ice nucleation potential of soot particles requiring homogeneous freezing threshold conditions. However, the ice nucleation efficiency of soot particles coated with an aqueous organic layer was similar to bare soot particles. Hydration of bare soot particles slightly enhanced the ice nucleation efficiency, and the IN abilities of compact soot particles (roundness = ~ 0.6) were similar to bare lacey soot particles (roundness = ~ 0.4). These results indicate that ice nucleation properties are sensitive to the various aging treatments.

Environmental Molecular Sciences Laboratory↗