Search NASA⌕ Search

SEARCH · Search NASA

Results for “Core Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Understanding improved cycling and thermal stability of compositionally graded Ni-rich layered LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode materials

The concentration gradient is a strategic design, adjusting the distribution of Ni, typically with a higher Ni content in the core and a higher Mn content toward the surface. This design leverages the pivotal role of the Ni/Mn ratio, seeking to optimize cathode performance by balancing Ni's high capacity with Mn's stabilizing effects, particularly at the surface where degradation commonly occurs during cycling. Here, our study delves into the intricate structural and chemical transformations within concentration gradient cathode materials during electrochemical cycling. Utilizing advanced synchrotron X-ray techniques, including hard and soft X-ray absorption spectroscopy (hXAS, sXAS), and nanoscale X-ray imaging, we investigate buried changes in concentration gradient LiNi 0.6 Mn 0.2 Co 0.2 O 2 (CG NMC622). Contrary to conventional assumptions, our findings challenge the notion that cycling stability relies solely on Mn stability. Unraveling the roles of Ni and Mn, we uncover how their individual and collective contributions impact the cathode's overall performance. This investigation transcends established paradigms, shedding light on the crucial mechanisms governing the enhanced cycling stability of Nirich layered cathode materials.

25 ENERGY STORAGE↗

Carbazole-substituted benzobisoxazoles: near-UV fluorescent emitters and ambipolar hosts for organic light-emitting diodes

The design of organic light emitting diode (OLED) materials with the potential for exhibiting thermally-activated delayed fluorescence (TADF) is reported. Using computational methods (DFT/TD-DFT) as a guiding tool, six materials with a benzobisoxazole (BBO) core and donor–acceptor–donor architectures were designed by changing the conjugation position of carbazole-substituted phenyl substituents and the type of BBO isomer (cis- vs. trans-). Experimental steady-state and transient absorption spectroscopic techniques were utilized to probe the TADF activity of these molecules. Each material was then used in host–guest OLED devices as either near-UV dopants or host with low singlet-triplet energy differences. The electroluminescent properties show that when used as dopants these materials provide near-UV emission (CIE y < 0.06 and CIE x = 0.16), whereas when used as hosts, these materials show reduced operating voltages and increased performance efficiencies when compared to commercial materials.

36 MATERIALS SCIENCE↗

CELLULAR COFFERDAMS AS PERMANENT HYDROPOWER DAM STRUCTURES

This paper presents the results of a comprehensive study on the potential use of cellular cofferdams as basis for the design and construction of water retaining structures to sustainably and cost-effectively harness hydropower. Previously, cellular cofferdams have been widely used mainly as temporary water exclusion devices to permit dry construction of in-water structures such as dams, locks, bridge footings and piers, and hydroelectric power plants. Design and construction requirements for cellular cofferdams are less stringent than for hydropower dams. To make cellular cofferdams suitable for permanent hydropower use, different design concepts that utilize cellular cofferdams as the main or core element of the water-retaining dam structure are proposed. One particular key design concept is the so-called “dry construction technique” in which the granular fill in cofferdam cells and the downstream berm are permanently kept dry in contrast to the wet construction technique for temporary use of cellular cofferdams. The viability of the proposed permanent cellular cofferdam design concepts is demonstrated using well-established structural and geotechnical design procedures and computational modeling. The improved performance of the proposed design concepts, particularly in combination with the dry construction technique, show cellular cofferdams have the potential to be used as basis for the construction of permanent hydropower dam structures that are versatile, with less impact on the environment, and will cost less to build than conventional hydropower dams.

13 HYDRO ENERGY↗

AI-ENABLED MONITORING OPTIONS TOWARDS SECURE MICROREACTOR DEPLOYMENT AND OPERATIONS

Global nuclear energy deployment scenarios suggest favorable economics for smaller, more versatile, and self-contained reactor technologies. Recognizing their key features as integrated, autonomous and either semi-remotely operated or fully remotely operated systems, microreactors are expected to be deployed in large numbers servicing off/micro-grids, many in geographically remote locations. Integrated nature of these systems as well as ease of their transportation as complete units, simplified installation and relocation/decommissioning challenge traditional continuity-of-knowledge practices used for conventional light water reactors where refueling is done onsite at designated times only replacing portions of their cores and only after their full commissioning for operations including completion of their containment building with security and safeguards measures in place. This effort is exploring AI (artificial intelligence)-enabled monitoring options that would be design agnostic and would assure secure unit deployment and operations. The principle is to maintain situational awareness via real-time evaluations of simultaneous and remotely transmitted monitoring data capturing key safeguards attributes including such characteristics as temperature, radiation, vibrational signals (inter alia), and others. The key principle is to provide reliable and resilient security options while maintaining simplified and economical deployment. The paper will review feasible options for AI-enabled solutions for such evaluations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Establishing a neutronics design and equilibrium cycle analysis for the I 2 S-LWR reactor with UO 2 and U 3 Si 2 Fuel

The Integral Inherently Safe (I 2 S-LWR) reactor was developed not only to enhance passive reactor safety performance, but also to improve reactor economics. This paper describes the steady-state and depletion analysis of the I 2 S-LWR core using both UO 2 and U 3 Si 2 fuel designs. The development and validation of the core models are described, to include the generation of HELIOS cross sections and comparison with the WEC lattice code PARAGON and the Monte Carlo code SERPENT. The few group homogenized cross sections were then prepared for the U.S. NRC PARCS core simulator using the GenPMAXS code. The multicycle capability in PARCS was used to determine the equilibrium core condition for three batch cores loaded with the UO 2 and then with the U 3 Si 2 fuel designs. Comparing the results from the WEC code ANC at beginning, middle, and end of cycle showed good agreement. Core conditions at beginning and end of cycle were then used to determine the converged steady-state conditions of a coupled RELAP5/PARCS model, which provided the initial condition for various transient accident simulations which are reported in a companion paper.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

ScalaBLAST 2.0: Rapid and robust BLAST calculations on multiprocessor systems

BLAST remains one of the most widely used tools in computational biology. The rate at which new sequence data is available continues to grow exponentially, driving the emergence of new fields of biological research. At the same time multicore systems and conventional clusters are more accessible. ScalaBLAST has been designed to run on conventional multiprocessor systems with an eye to extreme parallelism, enabling parallel BLAST calculations using over 16,000 processing cores with a portable, robust, fault-resilient design. ScalaBLAST 2.0 source code can be freely downloaded from http://omics.pnl.gov/software/ScalaBLAST.php.

Environmental Molecular Sciences Laboratory↗

Decay Heat Removal in GEN IV Gas‐Cooled Fast Reactors

The safety goal of the current designs of advanced high‐temperature thermal gas‐cooled reactors (HTRs) is that no core meltdown would occur in a depressurization event with a combination of concurrent safety system failures. This study focused on the analysis of passive decay heat removal (DHR) in a GEN IV direct‐cycle gas‐cooled fast reactor (GFR) which is based on the technology developments of the HTRs. Given the different criteria and design characteristics of the GFR, an approach different from that taken for the HTRs for passive DHR would have to be explored. Different design options based on maintaining core flow were evaluated by performing transient analysis of a depressurization accident using the system code RELAP5‐3D. The study also reviewed the conceptual design of autonomous systems for shutdown decay heat removal and recommends that future work in this area should be focused on the potential for Brayton cycle DHRs.

Cheng, Lap-Yan↗

Systems Engineering (SE) Approach of Developing A Passive Safety Injection System (PSIS) to Cope with APR1400 Extended Station Black-Out (SBO) Accident Using RELAP5

On 11 March 2011 the power supply and cooling of the three Fukushima Daiichi reactors were disabled by a major earthquake followed by a relatively high tsunami waves. The earthquake damaged the electrical grid which is the normal power supply for the reactors, then the tsunami waves disabled the emergency diesel generators of the Fukushima Daiichi reactors, which left the plant with no alternating current (AC) source. This condition is called 'Station Black-Out'. The reactors were tripped immediately, but due to the nuclear physics phenomena, the reactor cores were still producing thermal power, which is generated by the decay of radioactive fission products in the reactor core, known as decay heat. The decay heat had not been circulated to an external heat sink and eventually the accumulative heat produced in the core led to damage to the reactor cores. After the Fukushima Daiichi accident, Design Extension Condition (DEC) such as total loss of feed water (TLOFW), and prolonged Station Black-Out (SBO) attracted the attention of nuclear experts. The attention focuses on the defense in depth concept, redundancy and sustainability of the systems, and development of the passive safety systems, which rely on natural physics laws. The topic of this paper is to discuss the possibility of attaching a Passive Safety Injection System (PSIS) to the APR1400. The PSIS is a safety system which provides adequate cooling water to the steam generators after the loss of the Auxiliary Feed Water System (AFWS) during an extended SBO accident. The PSIS will be available while the power supply of the plant is being recovered and the active safety systems take over the functionality. The anticipated PSIS will be automatically actuated to enhance the engineered safety feature and to reduce the human errors. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

EVALUATION OF AN EXPERIMENTAL DATA SET TO BE VALIDATION DATA FOR CFD FOR A VHTR

The very high temperature reactor (VHTR) has been chosen as the concept for the next generation nuclear plant (NGNP), supported by the U. S. Department of Energy. There are two basic designs for the VHTR: a prismatic design and a pebble-bed design. In the prismatic design, the coolant (helium) exits the core into a lower plenum as jets. The helium then turns 90° and flows toward the exit duct around cylindrical support posts. Safety analysis by computational fluid dynamics (CFD) is desired to determine the level of mixing of the jets and check for hot spots. Experimental data were taken in a scaled model of a slice of the lower plenum of a prismatic VHTR. Numerical investigations have been made using CFD to determine if the data are suitable for validation. This paper provides the findings of the investigations including results for a modified version of the flow field. The investigations include a determination of the extent of the computational domain needed, the best outlet boundary condition to use, the accuracy of the inlet data, application of several turbulence models and the search for the cause of an instability that causes large random excursions of flow variables. It is found that the inlet data measured by PIV are not sufficiently accurate and that the instability is apparently caused by the presence of the first inlet jet which impinges on a recirculation zone.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Full Core 3-D Simulation of a Partial MOX LWR Core

A comparative analysis and comparison of results obtained between 2-D lattice calculations and 3-D full core nodal calculations, in the frame of MOX fuel design, was conducted. This study revealed a set of advantages and disadvantages, with respect to each method, which can be used to guide the level of accuracy desired for future fuel and fuel cycle calculations. For the purpose of isotopic generation for fuel cycle analyses, the approach of using a 2-D lattice code (i.e., fuel assembly in infinite lattice) gave reasonable predictions of uranium and plutonium isotope concentrations at the predicted 3-D core simulation batch average discharge burnup. However, it was found that the 2-D lattice calculation can under-predict the power of pins located along a shared edge between MOX and UO2 by as much as 20%. In this analysis, this error did not occur in the peak pin. However, this was a coincidence and does not rule out the possibility that the peak pin could occur in a lattice position with high calculation uncertainty in future un-optimized studies. Another important consideration in realistic fuel design is the prediction of the peak axial burnup and neutron fluence. The use of 3-D core simulation gave peak burnup conditions, at the pellet level, to be approximately 1.4 times greater than what can be predicted using back-of-the-envelope assumptions of average specific power and irradiation time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uncovering supramolecular chirality codes for the design of tunable biomaterials

In neurodegenerative diseases, polymorphism and supramolecular assembly of β-sheet amyloids are implicated in many different etiologies and may adopt either a left- or right-handed supramolecular chirality. Yet, the underlying principles of how sequence regulates supramolecular chirality remains unknown. Here, we characterize the sequence specificity of the central core of amyloid-β 42 and design derivatives which enable chirality inversion at biologically relevant temperatures. We further find that C-terminal modifications can tune the energy barrier of a left-to-right chiral inversion. Leveraging this design principle, we demonstrate how temperature-triggered chiral inversion of peptides hosting therapeutic payloads modulates the dosed release of an anticancer drug. These results suggest a generalizable approach for fine-tuning supramolecular chirality that can be applied in developing treatments to regulate amyloid morphology in neurodegeneration as well as in other disease states.

60 APPLIED LIFE SCIENCES↗

Moly 99 Reactor Case Study

Molybdenum-99 (Moly 99) is a critical raw material for Technetium (Tc) 99m, a radioactive isotope most widely used in nuclear medicine procedures. Moly 99 has a short half-life of about six hours, which means it cannot be stockpiled. When Moly 99 decays, it turns into Tc 99m, which has a half-life of 214,000 years. The photon energy emitted from the decay of Moly 99 is used in a variety of nuclear imaging technologies such as gamma cameras. Furthermore, radiopharmaceutical manufacturers use the photon energy emitted from the decay of Moly 99 to produce generators for hospitals, clinics, and radiopharmacies. Once Moly 99 decays to Tc 99m, it is used to make individual patient doses for a variety of diagnostic imaging procedures. The Moly 99 Reactor Design is a conceptual blueprint for Moly 99 production that does not use weapon-grade uranium; instead, the reactor has a target core of low-enriched uranium. The reactor design is small, reaching a foot-and-a-half in height and diameter and consumes less than two megawatts of power. The reactor's only purpose is for medical isotope production and with every fission, Moly 99 is produced.

07 ISOTOPE AND RADIATION SOURCES↗

Power distributions in fresh and depleted LEU and HEU cores of the MITR reactor

The Massachusetts Institute of Technology Reactor (MITR-II) is a research reactor in Cambridge, Massachusetts designed primarily for experiments using neutron beam and in-core irradiation facilities. It delivers a neutron flux comparable to current LWR power reactors in a compact 6 MW core using Highly Enriched Uranium (HEU) fuel. In the framework of its non-proliferation policies, the international community presently aims to minimize the amount of nuclear material available that could be used for nuclear weapons. In this geopolitical context, most research and test reactors both domestic and international have started a program of conversion to the use of Low Enriched Uranium (LEU) fuel. A new type of LEU fuel based on an alloy of uranium and molybdenum (UMo) is expected to allow the conversion of U.S. domestic high performance reactors like the MITR-II reactor. Toward this goal, core geometry and power distributions are presented. Distributions of power are calculated for LEU cores depleted with MCODE using an MCNP5 Monte Carlo model. The MCNP5 HEU and LEU MITR models were previously compared to experimental benchmark data for the MITR-II. This same model was used with a finer spatial depletion in order to generate power distributions for the LEU cores. The objective of this work is to generate and characterize a series of fresh and depleted core peak power distributions, and provide a thermal hydraulic evaluation of the geometry which should be considered for subsequent thermal hydraulic safety analyses.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Contribution of the Sub-Surface to Electrocatalytic Activity in Atomically Precise La 0.7 Sr 0.3 MnO 3 Heterostructures

Electrocatalytic reactions are known to take place at the catalyst/electrolyte interface. Whereas recent studies of size-dependent activity in nanoparticles and thickness-dependent activity of thin films imply that the sub-surface layers of a catalyst can contribute to the catalytic activity as well, most of these studies consider actual modification of the surfaces. Here, in this study, the role of catalytically active sub-surface layers was investigated by employing atomic-scale thickness control of the La 0.7 Sr 0.3 MnO 3 (LSMO) films and heterostructures, without altering the catalyst/electrolyte interface. The activity toward the oxygen evolution reaction (OER) shows a non-monotonic thickness dependence in the LSMO films and a continuous screening effect in LSMO/SrRuO 3 heterostructures. The observation leads to the definition of an “electrochemically-relevant depth” on the order of 10 unit cells. This study on the electrocatalytic activity of epitaxial heterostructures provides new insight in designing efficient electrocatalytic nanomaterials and core-shell architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Porting DMRG++ Scientific Application to OpenPOWER

With the rapidly changing microprocessor designs and architectural diversity (multi-cores, many-cores, accelerators) for the next generation HPC systems, scientific applications must adapt to the hardware, to exploit the different types of parallelism and resources available in the architecture. To get the benefit of all the in-node hardware threads, it is important to use a single programming model to map and coordinate the available work to the different heterogeneous execution units in the node (e.g., multi-core hardware threads (latency optimized), accelerators (bandwidth optimized), etc.).Our goal is to show that we can manage the node complexity of these systems by using OpenMP for in-node parallelization by exploiting different “programming styles” supported by OpenMP 4.5 to program CPU cores and accelerators. Finding out the suitable programming-style (e.g., SPMD style, multi-level tasks, accelerator programming, nested parallelism, or a combination of these) using the latest features of OpenMP to maximize performance and achieve performance portability across heterogeneous and homogeneous systems is still an open research problem.We developed a mini-application, Kronecker Product (KP), from the original DMRG++ application (sparse matrix algebra) computational motif to experiment with different OpenMP programming styles on an OpenPOWER architecture and present their results in this paper.

Chatterjee, Ronnie↗

Reactor physics analysis of a new Accident Tolerant Fuel called Fuel-in-Fibers

Fuel-in-Fibers (F-in-F) is an Accident Tolerant Fuel (ATF) concept aimed at significantly increasing the fission product retention capability of nuclear fuel at high temperatures, similar to another ATF concept, Fully Ceramic Microencapsulated Fuel (FCM). FCM, however, when implemented in a conventional Pressurized Water Reactor (PWR) fuel geometry, is not able to maintain an 18-month fuel cycle length and remain below the proliferation enrichment limit of 20 w/o 235 U using the standard cycle reload strategy. The F-in-F enrichment is decreased by putting the fuel in a cylindrical fiber instead of a spherical particle in order to increase the volume fraction of fuel in the pellet. The fibers are created with a direct manufacturing process that allows for the minimization of the volume occupied by the SiC matrix and the maximization of uranium loading via direct deposition of high density fuels like uranium nitride (UN). The full core reactor physics simulation showed that when the F-in-F design used UN as a fuel, it only required enrichments of 6% to maintain an 18-month fuel cycle length. Based on a full core analysis when compared to the current reference fuel for a standard 4-loop Westinghouse PWR, F-in-F has a similar steady state thermal hydraulic and neutronic performance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Porting WarpX to GPU-accelerated platforms

WarpX is a general purpose electromagnetic particle-in-cell code that was originally designed to run on many-core CPU architectures. We describe the strategy, based on the AMReX library, followed to allow WarpX to use the GPU-accelerated nodes on OLCF’s Summit supercomputer, a strategy we believe will extend to the upcoming machines Frontier and Aurora. We summarize the challenges encountered, lessons learned, and give current performance results on a series of relevant benchmark problems.

97 MATHEMATICS AND COMPUTING↗

Polymer Architecture: Does it Influence Shear Stability?

Hyperbranched and linear poly(alkyl methacrylate)s with and without polycaprolactone grafts were designed and prepared via a core-first strategy, then evaluated with respect to their rheology and shear stability performance. The focus of this work was to study the effect of architecture on mechanical shear stability, as it relates to lubricant performance. The polymers were prepared from functionalized macroinitiators subsequently subjected to ATRP/ARGET-ATRP conditions with dodecyl methacrylate and 2-ethylhexyl methacrylate mixtures. As expected, most compounds displayed an increased viscosity index along with increasing molecular weights. The inclusion of polycaprolactone appears to have enhanced the viscosity index in select samples. Although the hyperbranched polymers studied here varied in the number of arms from about twenty to one (linear), the data presented supports the empirical understanding that shear stability is mainly influenced by molecular weight and not architecture or topology. The polymers with caprolactone blocks demonstrated a positive effect on the shear stability, as in possessing the lowest viscosity loss values which were four times lower than the other compounds included in this study as well as the benchmark.

Cosimbescu, Lelia↗