Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffraction pattern”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Structural and impedance studies of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} synthesized by sol-gel method

LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} is synthesized by sol-gel method by using succinic acid as chelating agent. X-ray diffraction pattern confirms the material is spinel cubic structure with Fd3m space group. Impedance spectroscopy analysis of spinel LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} was performed under a wide frequency and temperature range of 50 Hz to 5 MHz and 303 K to 783 K respectively. The hopping of the electrons, ionic conductivity and activation energy were analyzed from the relaxation frequency of the imaginary impedance (Z”). The activation energy E{sub a} is calculated from the Arrhenius plots and it is found to be 0.3713 eV, which indicates the existence of oxygen vacancy in the material. Nyquist plot indicates the presence of grain effect in the material and suppression in the grain effect is observed with increasing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation of molybdenum carbides with multiple morphologies using surfactants as carbon sources

Molybdenum carbides with surfactants as carbon sources were prepared using the carbothermal reduction of the appropriate precursors (molybdenum oxides deposited on surfactant micelles) at 1023 K under hydrogen gas. The carburized products were characterized using scanning electron microscopy (SEM), X-ray diffraction and BET surface area measurements. From the SEM images, hollow microspherical and rod-like molybdenum carbides were observed. X-ray diffraction patterns showed that the annealing time of carburization had a large effect on the conversion of molybdenum oxides to molybdenum carbides. And BET surface area measurements indicated that the difference of carbon sources brought a big difference in specific surface areas of molybdenum carbides. - Graphical abstract: Molybdenum carbides having hollow microspherical and hollow rod-like morphologies that are different from the conventional monodipersed platelet-like morphologies. Highlights: Black-Right-Pointing-Pointer Molybdenum carbides were prepared using surfactants as carbon sources. Black-Right-Pointing-Pointer The kinds of surfactants affected the morphologies of molybdenum carbides. Black-Right-Pointing-Pointer The time of heat preservation at 1023 K affected the carburization process. Black-Right-Pointing-Pointer Molybdenum carbides with hollow structures had larger specific surface areas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Zn-Doped RuO2 Electrocatalyts for Selective Oxygen Evolution: Relationship Between Local Structure and Electrocatalytic Behavior in Chloride Containing Media

Nanocrystalline electrocatalytically active materials of chemical composition Ru{sub 1-x}Zn{sub x}O{sub 2} (0 < x < 0.3) were synthesized by freeze-drying technique. The diffraction patterns of the prepared samples corresponded to single-phase rutile type oxides.Local structure of the Ru{sub 1-x}Zn{sub x}O{sub 2} based on refinement of Ru K and Zn K edge EXAFS functions shows clustering of the Zn ions in the blocks with ilmenite structure intergrowing with Ru-rich rutile blocks. Ru{sub 1-x}Zn{sub x}O{sub 2} oxides are selective catalysts for anodic oxygen evolution. The selectivity toward oxygen evolution in the presence of chlorides is affected by the actual Zn content and can be ascribed to structural hindrance of the formation of the surface peroxo group based active sites for chlorine evolution. The selectivity toward oxygen evolution in presence of chlorides is accompanied by the drop of the total activity, which gets more pronounced with increasing Zn content.

36 MATERIALS SCIENCE↗

Tailoring of crystal phase and Néel temperature of cobalt monoxides nanocrystals with synthetic approach conditions

Cobalt monoxide (CoO) nanocrystals were synthesized by thermal decomposition of cobalt oleate precursor in a high boiling point organic solvent 1-octadecene. The X-ray diffraction pattern and transmission electron microscopy studies suggest that pure face-centered-cubic (fcc) phase of CoO can be synthesized in the temperature range of 569–575 K. Thermolysis product at higher synthesis temperature 585 K is a mixture of fcc and hexagonal-closed-packed (hcp) phases. These nanocrystals are single crystals of CoO and exhibit mixture of two types of morphologies; one is nearly spherical with 5–25 nm diameter, and other one is 5–10 nm thick flake. The pure fcc-CoO nanocrystals show enhanced, and mixture of fcc- and hcp-CoO nanocrystals show reduced antiferromagnetic ordering temperature. Such results provide new opportunities for optimizing and enhancing the properties and performance of cobalt oxide nanomaterials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of pH on particles size and gas sensing properties of In{sub 2}O{sub 3} nanoparticles

In this work, indium oxide (In{sub 2}O{sub 3}) nanoparticles have been synthesized by co-precipitation method and the effect of pH on the structural and sensor response values of In{sub 2}O{sub 3} nanoparticles has been reported. X-ray diffraction pattern (XRD) revealed the formation of cubic phase In{sub 2}O{sub 3} nanoparticles. FESEM results indicate the formation of nearly spherical shape In{sub 2}O{sub 3} nanoparticles. The band gap energy value changed with change in pH value and found to have highest value at pH 9. Indium oxide nanoparticles thus prepared were deposited as thick films on alumina substrates to act as gas sensors and their sensing response to ethanol vapors and LPG at 50 ppm was investigated at different operating temperatures. It has been observed that all sensors exhibited optimum response at 300°C towards ethanol and at 400°C towards LPG. In{sub 2}O{sub 3} nanoparticles prepared at pH 9, being smallest in size as compared to other, exhibit highest sensor response (SR).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The evolution of orientation relationships during the transformation of a twin-free T-particle to tenfold T-twins in an Al alloy during homogenisation

Highlights: • The ORs of T-phase change continuously during its transformation to tenfold twins. • The changes in ORs are achieved by lattice rotations of T-phase about [010]{sub T} axis. • The OR change of T-phase exhibits a relationship with its cross-section shape. • The OR change of T-phase reduce the interface misfit increased by newly-formed twins. • Rotation of T-particle requires coordinate deformation at the near-interface region. - Abstract: The crystallographic and morphological analysis of T-phase formation in Al alloys was investigated using high-resolution electron microscopy (HRTEM) and selected-area electron diffraction pattern (SAEDP). The results show that the orientation relationships (ORs) of the T-phase change continuously from its original ORs during the transformation of a twin-free T-particle to the tenfold T-twins. These OR changes were achieved by lattice rotations of T-twin domains (T-TDs) about the [010]{sub T}//[010]{sub Al} axis by an angle ranging from 0° to 9°, and this exhibits a relationship with the shape of the cross-sections of the T-phase (T-CSs). The changes in ORs of the T-phase can reduce the increase in interface misfit between the newly-formed T-TDs and the Al matrix. The matrix could only accommodate the rotation of a T-particle at the near-interface region at relatively high temperatures.

36 MATERIALS SCIENCE↗

Growth and characterization of nonpolar, heavily Mn-substituted ZnO films

Eight percent of Mn was successfully diluted into nonpolar ZnO films deposited by pulsed laser deposition on single crystal (100) SrTiO{sub 3} substrates. X-ray diffraction patterns and energy-dispersive X-ray spectroscopy confirmed high crystallinity of the films and excluded unintentional magnetic doping. A unique surface domain structure was observed by scanning electron microscope and atomic force microscope, which might play a vital role to strain release induced by lattice mismatch between nonpolar (11–20) ZnO film and (100) SrTiO{sub 3} substrate. In addition, the films showed strong ferromagnetism with a large coercivity H{sub C} ∼ 180 Oe at room temperature. The large magnetic moment is ascribed to carrier-mediated exchange interaction between the Mn ions, where the majority of the carriers are oxygen vacancies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Description and crystal structure of nyholmite, a new mineral related to hureaulite, from Broken Hill, New South Wales, Australia

Nyholmite, Cd{sub 3}Zn{sub 2}(AsO{sub 3}OH){sub 2}(AsO{sub 4}){sub 2} {center_dot} 4H{sub 2}O, from the Block 14 Opencut, Broken Hill, New South Wales, Australia, is a new Cd-Zn arsenate species, isostructural with the minerals of the hureaulite group. The mineral occurs in a quartz-garnet-arsenopyrite matrix as white globules, tufted aggregates of fibrous crystals and radiating hemispheres of thin, colourless, bladed crystals. Associated minerals are goldquarryite, lavendulan-sampleite, scorodite-strengite and gypsum. Individual crystals are up to 0.2 mm in length and 0.05 mm across. The mineral is transparent to translucent with a vitreous lustre. It is brittle with an uneven fracture and a white streak. The Mohs hardness is 3-3.5 and the calculated density is 4.23 g cm{sup -3} for the empirical formula. Electron microprobe analyses yielded CdO 34.58, ZnO 9.72, MnO 3.59, CuO 3.39, Al{sub 2}O{sub 3} 0.20, CaO 0.16, PbO 0.37, As{sub 2}O{sub 5} 34.55, P{sub 2}O{sub 5} 6.29 totalling 92.85 wt.%. The empirical formula, based on 20 oxygen atoms, is Ca{sub 0.03}Pb{sub 0.02} Cd{sub 2.80}Al{sub 0.04}Zn{sub 1.24}-Cu{sub 0.44}Mn{sub 0.53}[(AsO{sub 4}){sub 3.13}(PO{sub 4}){sub 0.92}]{Sigma}{sub 4.05}H{sub 1.91} {center_dot} 3.79H{sub 2}O. Nyholmite is monoclinic, C2/c, a = 18.062(4) {angstrom}, b = 9.341(2) {angstrom}, c = 9.844(2) {angstrom}, {beta} = 96.17(3){sup o}, V = 1651.2(6) {angstrom}{sup 3} (single-crystal data, at 123 K). The six strongest lines in the X-ray powder diffraction pattern are [d({angstrom}),I,(hkl)]: 8.985,30,(200); 8.283, 85,(110); 6.169,25,(111); 4.878,25,(002); 3.234,100,(222, 420); 3.079,65,(222, 511); 2.976,45,(113). The crystal structure was solved by Patterson methods and refined using 2045 observed reflections to R1(F) = 3.73%. The structure is characterized by a kinked, five-membered chain of edge-sharing M{phi}{sub 6} ({phi} = unspecified anion) octahedra, or pentamer, that extends in the a direction. The pentamers link by sharing corners to form a sheet in the (001) plane. Pentamers are also linked, via corner-sharing, by (As,P)O{sub 4} groups forming thick slabs in the (001) plane. The slabs link in the c direction by cornersharing between octahedra and tetrahedra to form a dense heteropolyhedral framework. Moderate to weak hydrogen-bonding provides additional linkage between the slabs.

36 MATERIALS SCIENCE↗

Induced polarized state in intentionally grown oxygen deficient KTaO{sub 3} thin films

Deliberately oxygen deficient potassium tantalate thin films were grown by RF magnetron sputtering on Si/SiO{sub 2}/Ti/Pt substrates. Once they were structurally characterized, the effect of oxygen vacancies on their electric properties was addressed by measuring leakage currents, dielectric constant, electric polarization, and thermally stimulated depolarization currents. By using K{sub 2}O rich KTaO{sub 3} targets and specific deposition conditions, KTaO{sub 3-{delta}} oxygen deficient thin films with a K/Ta = 1 ratio were obtained. Room temperature X-ray diffraction patterns show that KTaO{sub 3-{delta}} thin films are under a compressive strain of 2.3% relative to KTaO{sub 3} crystals. Leakage current results reveal the presence of a conductive mechanism, following the Poole-Frenkel formalism. Furthermore, dielectric, polarization, and depolarization current measurements yield the existence of a polarized state below T{sub pol} {approx} 367 Degree-Sign C. A Cole-Cole dipolar relaxation was also ascertained apparently due to oxygen vacancies induced dipoles. After thermal annealing the films in an oxygen atmosphere at a temperature above T{sub pol}, the aforementioned polarized state is suppressed, associated with a drastic oxygen vacancies reduction emerging from annealing process.

36 MATERIALS SCIENCE↗

Synthesis of ZnO decorated graphene nanocomposite for enhanced photocatalytic properties

Zinc oxide/Graphene (GZ) composites with different concentrations of ZnO were successfully synthesized through simple chemical precipitation method. The X-ray diffraction pattern and the micro-Raman spectroscopic technique revealed the formation of GZ composite, and the energy dispersive X-ray spectrometry analysis showed the purity of the prepared samples. The ZnO nanoparticles decorated graphene sheets were clearly visible in the field emission scanning electron micrograph. Raman mapping was employed to analyze the homogeneity of the prepared samples. The diffuse-reflectance spectra clearly indicated that the formation of GZ composites promoted the absorption in the visible region also. The photocatalytic activity of ZnO and GZ composites was studied by the photodegradation of Methylene blue dye. The results revealed that the GZ composites exhibited a higher photocatalytic activity than pristine ZnO. Hence, we proposed a simple wet chemical method to synthesize GZ composite and its application on photocatalysis was demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dopant activation in ion implanted silicon by microwave annealing

Microwaves are used as a processing alternative for the electrical activation of ion implanted dopants and the repair of ion implant damage within silicon. Rutherford backscattering spectra demonstrate that microwave heating reduces the damage resulting from ion implantation of boron or arsenic into silicon. Cross-section transmission electron microscopy and selective area electron diffraction patterns demonstrate that the silicon lattice regains nearly all of its crystallinity after microwave processing of arsenic implanted silicon. Sheet resistance readings indicate the time required for boron or arsenic electrical activation within implanted silicon. Hall measurements demonstrate the extent of dopant activation after microwave heating of implanted silicon. Physical and electrical characterization determined that the mechanism of recrystallization in arsenic implanted silicon is solid phase epitaxial regrowth. The boron implanted silicon samples did not result in enough lattice damage to amorphize the silicon lattice and resulted in low boron activation during microwave annealing even though recrystallization of the Si lattice damage did take place. Despite low boron activation levels, the level of boron activation in this work was higher than that expected from traditional annealing techniques. The kinetics of microwave heating and its effects on implanted Si are also discussed.

36 MATERIALS SCIENCE↗

The Verwey transition in nanostructured magnetite produced by a combination of chimie douce and spark plasma sintering

Magnetite nanoparticles about 10 nm sized were synthesized by the polyol method. Zero-field-cooled (ZFC)-FC measurements showed a blocking temperature ∼170 K and the absence of the Verwey transition. They were subsequently consolidated by spark plasma sintering at 750 °C for 15 min, leading to a high density (92% of the theoretical density), solid body, with grains in the 150 nm range. X-ray diffraction patterns exhibited a spinel single phase with cell parameters corresponding to the magnetite structure. Magnetic measurements showed a decrease of coercivity from 685 Oe (54.5 kA/m) at 118 K to 90 Oe (7.2 kA/m) at 139 K. ZFC measurements at 25 Oe presented a three-fold magnetization increase as temperature increased; a small transition between 116 and 117.5 K, followed by a larger one from 117.6 to 124 K. The first transition can be associated with a complex crystallographic transition and delocalization of Fe{sup 2+}-Fe{sup 3+}, while the second one can be attributed to spin reorientation due to the magnetocrystalline anisotropy constant (K{sub 1}) change of sign as previously observed only in magnetite single crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin orientation, structure, morphology, and magnetic properties of hematite nanoparticles

Monodisperse hematite (α-Fe{sub 2}O{sub 3}) nanoparticles were synthesized by forced hydrolysis of acidic Fe{sup 3+} solution. Rietveld analysis was applied to the X-ray powder diffraction data to refine the lattice constants and atomic positions. The lattice constants for a hexagonal unit cell were determined to be a ∼ 0.50327 and c ∼ 1.37521 nm. High resolution transmission electron microscopy was employed to study the morphology of the particles. Atomic scale micrographs and diffraction patterns from several zone axes were obtained. These reveal the high degree of crystallinity of the particles. A series of observations made on the particles by tilting them through a range of ±45° revealed the particles to be micaceous with stacking of platelets with well defined crystallographic orientations. The Morin transition in these nanoparticles was found to occur at 210 K, which is lower temperature than 263 K of bulk hematite. It was ascertained from the previous Mössbauer studies that the spin orientation for nano-sized hematite particle flips from 90° to 28° with respect to the c-axis of the hexagonal structure during the Morin transition, which is in contrast to that observed in bulk hematite where spin orientation flips from 90° to 0°.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

An Open Combinatorial Diffraction Dataset Including Consensus Human and Machine Learning Labels with Quantified Uncertainty for Training New Machine Learning Models

Modern machine learning and autonomous experimentation schemes in materials science rely on accurate analysis of the data ingested by these models. Unfortunately, accurate analysis of the underlying data can be difficult, even for domain experts, complicating the training of the models intended to drive experiments. This is especially true when the goal is to identify the presence of weak signatures in diffraction or spectroscopic datasets. In this work, we examine a set of as-obtained diffraction data that track the phase transition from monoclinic to tetragonal in a Nb-doped VO2 film as a function of temperature and dopant concentration. We then task a set of domain experts and a set of machine learning experts with identifying which phase is present in each diffraction pattern manually and algorithmically, respectively; in both cases, the labels can vary dramatically, especially at the phase boundaries. We use the mode of the labels and the Shannon entropy as a method to capture, preserve and propagate consensus labels and their variance. Further we use the expert labels as a benchmark and demonstrate the use of Shannon entropy weighted scoring to test the performance of machine learning generated labels. Finally, we propose a material data challenge centered around generating improved labeling algorithms. This real-world dataset curated with expert labels can act as test bed for new algorithms. The raw data, annotations and code used in this study are all available online at data.gov and the interested reader is encouraged to replicate and improve the existing models

97 MATHEMATICS AND COMPUTING↗

Sol-gel synthesis, structure and photoluminescence properties of nanocrystalline Lu{sub 2}MoO{sub 6}:Eu

Highlights: {yields} Monoclinic-structural Lu{sub 2}MoO{sub 6} has strong absorption of near-UV light. {yields} The absorbed energy can be transferred from MoO{sub 5} groups to doped Eu{sup 3+} and luminescence. {yields} The absorption edge and the peak of the MoO{sub 5} excitation band shift in reverse ways. {yields} The decline of the crystallinity and the introduced defect respond for the variation. -- Abstract: In this paper, we reported the obtention of Eu{sup 3+} ion doped Lu{sub 2}MoO{sub 6} powders synthesized by a sol-gel method, and followed by annealing at different temperatures. The structure and photoluminescence properties of these powders were investigated. The X-ray diffraction pattern suggests that Lu{sub 2}MoO{sub 6} powder has a monoclinic structure. It was observed that the UV-visible and photoluminescence spectra of Lu{sub 2}MoO{sub 6}:Eu nanocrystallines varied systematically with the calcination temperature. The near-UV absorption edge shifts to long wavelength direction with the decreasing of the calcination temperature, while the peak of MoO{sub 5} excitation band shifts in an opposite way. The decline of the crystallinity and the introduced lattice defect were considered to respond for these variations. Additionally, due to the efficient red light emission under near-UV light excitation, the powder can be a candidate as red phosphor for white-light-emitting diodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of AlP coating on electrochemical properties of LiMn{sub 2}O{sub 4} cathode material for lithium ion battery

Highlights: • Modified LiMn{sub 2}O{sub 4} surface with AlP successfully. • AlP coating surface modification enhances the cycling stability of LiMn{sub 2}O{sub 4} at both room temperature and 60 °C. • AlP coating surface modification improves the rate capability of LiMn{sub 2}O{sub 4}. - Abstract: AlP-modified LiMn{sub 2}O{sub 4} has been synthesized via a simple chemical deposition method followed by high-temperature heating. The X-ray diffraction patterns, SEM images and Energy Dispersive Spectrometer show the successful surface coating of LiMn{sub 2}O{sub 4} by F-43 m crystal form AlP. AlP-modified LiMn{sub 2}O{sub 4} has a high discharge capacity of 125.7 mAh g{sup −1} with retention of 87% at a current density of 1C between 3.3 V and 4.3 V after 100 cycles at 60 °C, while bare LiMn{sub 2}O{sub 4} has more than 28% capacity loss. At 10 rates, the coated sample delivers capacity of 100 mAh g{sup −1}, which is much higher than bare LiMn{sub 2}O{sub 4}. Based on the EIS (electrochemical impedance spectroscopy) result, AlP coating can effectively inhibit the increase of the charge transfer resistance during charging and discharging cycles.

36 MATERIALS SCIENCE↗

Interface magnetism of iron grown on sulfur and hydrogen passivated GaAs(001)

Sulfur (S) and hydrogen (H) atom passivated GaAs(001) templates were used for deposition of ultrathin crystalline Fe films using molecular beam epitaxy, where the Fe thickness ranged from 10 to 45 atomic layers. Reflection high-energy electron diffraction patterns showed that the S- and H-passivated surfaces had no and very weak (1 x 2) superlattice reconstructions, respectively. This indicates that these GaAs(001) templates have a square-like symmetry. Magnetic anisotropies were investigated using the in-plane angular dependence of ferromagnetic resonance at 36 GHz. The in-plane cubic and uniaxial anisotropies and perpendicular uniaxial field were described by bulk and interface contributions, indicating that the Fe films have a high lattice coherence. The magnetic properties of the Fe films were compared to those grown on more commonly used GaAs(001) templates having a (4 x 6) reconstruction with an As-rich in-plane uniaxial symmetry. The Fe films grown on S-passivated templates exhibited unique magnetic properties caused by a decreased lattice spacing compared to the bulk Fe.

36 MATERIALS SCIENCE↗

In-Situ phase and texture characterization of solution deposited PZT thin films during crystallization.

Ferroelectric lead zirconate titanate (PZT) thin films are used for integrated capacitors, ferroelectric memory, and piezoelectric actuators. Solution deposition is routinely used to fabricate these thin films. During the solution deposition process, the precursor solutions are spin coated onto the substrate and then pyrolyzed to form an amorphous film. The amorphous film is then heated at a higher temperature (650-700 C) to crystallize the film into the desired perovskite phase. Phase purity is critical in achieving high ferroelectric properties. Moreover, due to the anisotropy in the structure and properties of PZT, it is desirable to control the texture obtained in these thin films. The heating rate during crystallization process is known to affect the sequence of phase evolution and texture obtained in these thin films. However, to date, a comprehensive understanding of how phase and texture evolution takes place is still lacking. To understand the effects of heating rate on phase and texture evolution, in-situ diffraction experiments during the crystallization of solution deposited PZT thin films were carried out at beamline 6-ID-B, Advanced Photon Source (APS). The high X-ray flux coupled with the sophisticated detectors available at the APS synchrotron source allow for in-situ characterization of phase and texture evolution at the high ramp rates that are commonly used during processing of PZT thin films. A PZT solution of nominal composition 52/48 (Zr/Ti) was spin coated onto a platinum-coated Si substrate (Pt//TiO{sub x}//SiO{sub 2}//Si). The films were crystallized using an infrared lamp, similar to a rapid thermal annealing furnace. The ramp rate was adjusted by controlling the voltage applied to the infrared lamp and increasing the voltage by a constant step with every acquisition. Four different ramp rates, ranging from {approx}1000 C/s to {approx}1 C/s, were investigated. The sample was aligned in grazing incidence to maximize the signal from the thin films. Successive diffraction patterns were acquired with a 1s acquisition time using a MAR SX-165 CCD detector during crystallization. The sample to detector distance and the tilt rotations of the detector were determined in Fit2D{copyright} by using Al{sub 2}O{sub 3} as the calibrant. These corrections were applied to the patterns when binning the data into radial (2{theta}) and azimuthal bins. The texture observed in the thin film was qualitatively analyzed by fitting the intensity peaks along the azimuthal direction with a gaussian profile function to obtain the integrated intensity of the peaks. Data analysis and peak fitting was done using the curve fitting toolbox in MATLAB{copyright}. A fluorite-type phase was observed to form before the perovskite phase for all ramp rates. PtxPb is a transient intermetallic formed due to the interaction of the thin film and the bottom electrode during crystallization. Ramp rate was observed to significantly affect the amount of PtxPb observed in the thin films during crystallization. Ramp rate was also observed to affect the final texture obtained in the thin films. These results will be discussed in the poster in view of the current understanding of these materials.

43 PARTICLE ACCELERATORS↗