Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffusion bonding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Understanding geopolymer binder-aggregate interfacial characteristics at molecular level

The interfacial characteristics of geopolymer binder to aggregate composites are poorly understood, especially at molecular level. Herein, molecular models are developed to study, for the first time, the geopolymer-aggregate interface. Chemically, various forms of interfacial bonding are characterized, including Al-O-Si bonding through condensation reactions, NaO and H-bonding. An atomic-level interfacial transition zone (ITZ) is identified, attributed to the concentration of –OH groups. Increasing the Si/Al ratio of geopolymer is found to decrease the ITZ density, but have limited effect on the ITZ width. A heterogeneous diffusion characteristic occurs in geopolymer, due to the weak interfacial interaction. Mechanically, lowering the Si/Al ratio promotes the interfacial strength due to the stronger interfacial interaction and higher cross-linking degree in geopolymer. Under loading the interfacial fracture undergoes three stages: crack propagation, chain bridging (including aluminosilicate and ionic bridging) and breakage. The above atomic-level findings may facilitate a better design of geopolymer concrete in engineering.

36 MATERIALS SCIENCE↗

Phosphate-intercalated Ca-Fe-layered double hydroxides: Crystal structure, bonding character, and release kinetics of phosphate

The nitrate-form of Ca-Fe-layered double hydroxide (Ca-Fe-LDH) was synthesized via co-precipitation method, and its phosphate-intercalates were prepared by ion-exchange reaction. According to X-ray diffraction analysis, the Ca-Fe-LDH-NO{sub 3}{sup -} compound and its H{sub 2}PO{sub 4}{sup -}-intercalate showed hexagonal layered structures, whereas the ion-exchange reaction with HPO{sub 4}{sup 2-} caused a frustration of the layer ordering of LDH. Fe K-edge X-ray absorption spectroscopy clearly demonstrated that the Ca-Fe-LDH lattice with trivalent iron ions was well-maintained after the ion-exchange with HPO{sub 4}{sup 2-} and H{sub 2}PO{sub 4}{sup -}. Under acidic conditions, phosphate ions were slowly released from the Ca-Fe-LDH lattice and the simultaneous release of hydroxide caused the neutralization of acidic media. Fitting analysis based on kinetic models indicated a heterogeneous diffusion process of phosphates and a distinct dependence of release rate on the charge of phosphates. This study strongly suggested that Ca-Fe-LDH is applicable as bifunctional vector for slow release of phosphate fertilizer and for the neutralization of acid soil. -- Graphical abstract: We synthesized phosphate-intercalated Ca-Fe-LDH materials that can act as bifunctional inorganic vectors for the slow release of phosphate fertilizer and also the neutralization of acid soil. Fitting analysis based on kinetic models indicated a heterogeneous diffusion process of phosphates and a distinct dependence of release rate on the charge of phosphates. Display Omitted Research Highlights: {yields} The phosphate forms of Ca-Fe-layered double hydroxide (Ca-Fe-LDH) were synthesized via co-precipitation method. The crystal structure, bonding character, and release kinetics of phosphate of the phosphate-intercalates were investigated. These Ca-Fe-LDH materials are applicable as bifunctional vector for slow release of phosphate fertilizer and for the neutralization of acid soil.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamics of poly[n]catenane melts

Inspired by advances in the chemical synthesis of interlocking polymer architectures, extensive molecular dynamics simulations have been conducted to study the dynamical properties of poly[n]catenanes-polymers composed entirely of interlocking rings-in the melt state. Both the degree of polymerization (number of links) and the number of beads per ring are systematically varied, and the results are compared to linear and ring polymers. Herein, a simple Rouse-like model is presented, and its analytical solution suggests a decomposition of the dynamics into "ring-like" and "linear-like" regimes at short and long times, respectively. In agreement with this picture, multiple sub-diffusive regimes are observed in the monomer mean-squared-displacements even though interchain entanglement is not prevalent in the system. However, the Rouse-type model does not account for the topological effects of the mechanical bonds, which significantly alter the dynamics at intermediate length scales both within the rings and at the chain segment scales. The stress relaxation in the system is extremely rapid and may be conveniently separated into ring-like and linear-like contributions, again in agreement with the Rouse picture. However, the viscosity has a non-monotonic dependence on the ring size for long chains, which disagrees strongly with theoretical predictions. This unexpected observation cannot be explained in terms of chain disentanglement and is inconsistent with other measures of polymer relaxation. Possible mechanisms for this behavior are proposed and implications for materials design are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical trends favoring interstitial cluster formation in bcc high-entropy alloys from first-principles calculations

Achieving high strength and ductility is a common goal in structural alloy design. Body-centered cubic high-entropy alloys (HEAs) commonly highlight the conflict between these properties, with stronger alloys being brittle and vice versa. Recent reports suggest interstitial solutes can be used to overcome this trade-off, in some cases providing both strength and ductility enhancements. This effect has been correlated with interstitial cluster formation, although the conditions favoring their formation remain incompletely understood. Using first-principles calculations of solution energies and diffusivities, we provide insights into thermodynamic and kinetic factors favoring interstitial solute clusters. Among C, N and O solutes, O interstitials display most desirable diffusion kinetics. Further, the results highlight the importance of local composition fluctuations in the HEAs to enable the formation of clusters of appreciable size. The results are explained in terms of bonding and distortion trends across solutes and HEA compositions to provide guidelines for alloy design.

Borges, Pedro P P O↗

Barrierless On-Surface Metal Incorporation in Phthalocyanine-Based Molecules

On-surface metalation of metal-free phthalocyanine derivatives is a simple and solvent-free way to fabricate MPc compounds. Using phthalocyanine (H 2 Pc) molecules on Ag(111) as an example, we investigated the atomic-scale mechanisms of on-surface metalation processes using first-principles calculations based on density functional theory. When the molecules are deposited on a substrate first, we find that transition-metal atoms, except for Zn, drop directly from the vacuum into the molecule’s cavity without an energy barrier and bond with the inner four nitrogen atoms, with the two pyrrolic H atoms still in place. Subsequently, the two H atoms transfer to the substrate by overcoming small energy barriers and diffuse away. The substrate participates in the reaction by hybridization. In the alternative process, when metal atoms are adsorbed first on the surface and the H 2 Pc molecules are then added, the metal atoms diffuse into the cavity of the molecule via the molecule–surface interface by overcoming finite energy barriers. Finally, the above results provide insights into the on-surface metalation that can guide the control of the reaction pathway and products at the atomic level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coupled diffusion in lipid bilayers upon close approach

Biomembrane interfaces create regions of slowed water dynamics in their vicinity. When two lipid bilayers come together, this effect is further accentuated, and the associated slowdown can affect the dynamics of larger-scale processes such as membrane fusion. We have used molecular dynamics simulations to examine how lipid and water dynamics are affected as two lipid bilayers approach each other. These two interacting fluid systems, lipid and water, both slow and become coupled when the lipid membranes are separated by a thin water layer. We show in particular that the water dynamics become glassy, and diffusion of lipids in the apposed leaflets becomes coupled across the water layer, while the “outer” leaflets remain unaffected. This dynamic coupling between bilayers appears mediated by lipid–water–lipid hydrogen bonding, as it occurs at bilayer separations where water–lipid hydrogen bonds become more common than water–water hydrogen bonds. We further show that such coupling occurs in simulations of vesicle–vesicle fusion prior to the fusion event itself. As a result, such altered dynamics at membrane–membrane interfaces may both stabilize the interfacial contact and slow fusion stalk formation within the interface region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation, Migration, and Reactivity of Au CO Complexes on Gold Surfaces

Here, we report experimental as well as theoretical evidence that suggests Au CO complex formation upon the exposure of CO to active sites (step edges and threading dislocations) on a Au(111) surface. Room-temperature scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy, transmission infrared spectroscopy, and density functional theory calculations point to Au CO complex formation and migration. Room-temperature STM of the Au(111) surface at CO pressures in the range from 10^ 8 to 10^ 4 Torr (dosage up to 10^6 langmuir) indicates Au atom extraction from dislocation sites of the herringbone reconstruction, mobile Au CO complex formation and diffusion, and Au adatom cluster formation on both elbows and step edges on the Au surface. The formation and mobility of the Au CO complex result from the reduced Au Au bonding at elbows and step edges leading to stronger Au CO bonding and to the formation of a more positively charged CO (CO +) on Au. These studies indicate that the mobile Au CO complex is involved in the Au nanoparticle formation and reactivity, and that the positive charge on CO increases due to the stronger adsorption of CO at Au sites with lower coordination numbers.

36 MATERIALS SCIENCE↗

Structure and dynamics of POPC bilayers in water solutions of room temperature ionic liquids

Molecular dynamics simulations in the NPT ensemble have been carried out to investigate the effect of two room temperature ionic liquids (RTILs), on stacks of phospholipid bilayers in water. We consider RTIL compounds consisting of chloride ([bmim][Cl]) and hexafluorophosphate ([bmim][PF{sub 6}]) salts of the 1-buthyl-3-methylimidazolium ([bmim]{sup +}) cation, while the phospholipid bilayer is made of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC). Our investigations focus on structural and dynamical properties of phospholipid and water molecules that could be probed by inelastic and quasi-elastic neutron scattering measurements. The results confirm the fast incorporation of [bmim]{sup +} into the lipid phase already observed in previous simulations, driven by the Coulomb attraction of the cation for the most electronegative oxygens in the POPC head group and by sizeable dispersion forces binding the neutral hydrocarbon tails of [bmim]{sup +} and of POPC. The [bmim]{sup +} absorption into the bilayer favours the penetration of water into POPC, causes a slight but systematic thinning of the bilayer, and further stabilises hydrogen bonds at the lipid/water interface that already in pure samples (no RTIL) display a lifetime much longer than in bulk water. On the other hand, the effect of RTILs on the diffusion constant of POPC (D{sub POPC}) does not reveal a clearly identifiable trend, since D{sub POPC} increases upon addition of [bmim][Cl] and decreases in the [bmim][PF{sub 6}] case. Moreover, because of screening, the electrostatic signature of each bilayer is only moderately affected by the addition of RTIL ions in solution. The analysis of long wavelength fluctuations of the bilayers shows that RTIL sorption causes a general decrease of the lipid/water interfacial tension and bending rigidity, pointing to the destabilizing effect of RTILs on lipid bilayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigating vibrational relaxation in cyanide-bridged transition metal mixed-valence complexes using two-dimensional infrared and infrared pump-probe spectroscopies

Using polarization-selective two-dimensional infrared (2D IR) and infrared pumpprobe spectroscopies, we study vibrational relaxation of the four cyanide stretching (CN) vibrations found in [(NH3)5RuIIINCFeII(CN)5] (FeRu) dissolved in D2O or formamide and [(NC)5FeIICNPtIV(NH3)4NCFeII(CN)5] 4 (FePtFe) dissolved in D2O. These cyanide-bridged transition metal complexes serve as models for understanding the role high frequency vibrational modes play in metal-to-metal charge transfers over a bridging ligand. However, there is currently little information about vibrational relaxation and dephasing dynamics of the anharmonically coupled CN modes in the electronic ground state of these complexes. IR pump-probe experiments reveal that the vibrational lifetimes of the CN modes are 2 times faster when FeRu is dissolved in D2O versus formamide. They also reveal that the vibrational lifetimes of the CN modes of FePtFe in D2O are almost four times as long as for FeRu in D2O. Combined with mode-specific relaxation dynamics measured from the 2D IR experiments, the IR pump-probe experiments also reveal that intramolecular vibrational relaxation is occurring in all three systems on 1 ps timescale. Center line slope dynamics, which have been shown to be a measure of the frequency-frequency correlation function, reveal that the radial, axial, and trans CN modes exhibit a 3 ps timescale for frequency fluctuations. This timescale is attributed to the forming and breaking of hydrogen bonds between each mode and the solvent. The results presented here along with our previous work on FeRu and FePtFe reveal a picture of coupled anharmonic CN modes where the spectral diffusion and vibrational relaxation dynamics depend on the spatial localization of the mode on the molecular complex and its specific interaction with the solvent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic Segregation on Grain Boundaries in Thermally Grown Alumina Scales

This study first examined segregation behaviour in the alumina scale formed after 100 h at 1100 C on bare and MCrAlYHfSi-coated single-crystal superalloys with {approx}10 ppma La and Y. For the bare superalloy, Hf and Ti were detected on the grain boundaries of the inner columnar alumina layer. Increasing the oxidation temperature to 1200 C for 2 h did not change the segregation behavior. With the bond coating, both Y and Hf were segregated to the grain boundaries as expected. However, there was evidence of Ti-rich oxide particles near the gas interface suggesting that Ti diffused from the superalloy through the coating. To further understand these segregation observations with multiple dopants, other alumina-forming systems were examined. Alumina scale grain boundary co-segregation of Ti with Y is common for FeCrAl alloys. Co-segregation of Hf and Ti was observed in the scale formed on co-doped NiAl. No La segregation was detected in the scale formed on NiCrAl with only a 19 ppma La addition, however, the scale was adherent.

36 MATERIALS SCIENCE↗

Multi-scale boron penetration toward stabilizing nickel-rich cathode

Nickel-rich layered oxides LiNi x Co y Mn 1-x-y O 2 (x≥0.8) have been recognized as the preferred cathode materials to develop lithium-ion batteries with high energy density (>300Wh kg -1 ). However, the poor cycling stability and rate capability stemming from intergranular cracks and sluggish kinetics hinder their commercialization. To address such issues, a multi-scale boron penetration strategy is designed and applied on the polycrystalline LiNi 0.83 Co 0.11 Mn 0.06 O 2 particles that are pre-treated with pore construction. The lithium-ion conductive lithium borate in grain gaps functions as the grain binder that can bear the strain/stress from anisotropic contraction/expansion, and provides more pathways for lithium-ion diffusion. As a result, the intergranular cracks are ameliorated and the lithium-ion diffusion kinetics is improved. Moreover, the coating layer separates the sensitive cathode surface and electrolyte, helping to suppress the parasitic reactions and related gas evolution. In addition, the enhanced structural stability is acquired by strong B-O bonds with trace boron doping. As a result, the boron-modified sample with an optimized boron content of 0.5% (B5-NCM) exhibits a higher initial discharge capacity of 205.5mAh g -1 at 0.1C (1C=200mA g -1 ) and improved capacity retention of 81.7% after 100 cycles at 1C. Furthermore, the rate performance is distinctly enhanced by high lithium-ion conductive LBO (175.6mAh g -1 for B5-NCM and 154.6mAh g -1 for B0-NCM at 5C).

25 ENERGY STORAGE↗

Reversible Reactions, Mesh Size, and Segmental Dynamics Control Penetrant Diffusion in Ethylene Vitrimers

The diffusion of two aromatic dyes with nearly identical sizes was measured in ethylene vitrimers with precise linker lengths and borate ester cross-links using fluorescence recovery after photobleaching (FRAP). One dye possessed a reactive hydroxyl group, while the second was inert. The reaction of the hydroxyl group with the network is slow relative to the hopping times of the dye, resulting in a large slowdown by a factor of 50 for a reactive probe molecule. A kinetic model was fit to the fluorescence intensity data to determine rate constants for the reversible reaction of the dye from the network, which confirms the role of slow reaction kinetics. A second network cross-linker was also investigated with a substituted boronic ester showing ∼10,000 times faster exchange kinetics. In this system, the two dyes show the same diffusion coefficient, as the reaction is no longer the rate-limiting step. The role of dense meshes on small and large dyes is also discussed in the context of the existing theories. Finally, these results highlight the potential of dynamic networks to control penetrant transport through synergistic effects of the mesh size, dynamic bond kinetics, and penetrant–network interactions.

confinement↗

Three ancient halo subgiants: precise parallaxes, compositions, ages, and implications for globular clusters , ,

The most accurate ages for the oldest stars are those obtained for nearby halo subgiants because they depend almost entirely on just the measured parallaxes and absolute oxygen abundances. In this study, we have used the Fine Guidance Sensors on the Hubble Space Telescope to determine trigonometric parallaxes, with precisions of 2.1% or better, for the Population II subgiants HD 84937, HD 132475, and HD 140283. High quality spectra have been used to derive their surface abundances of O, Fe, Mg, Si, and Ca, which are assumed to be 0.1-0.15 dex less than their initial abundances due to the effects of diffusion. Comparisons of isochrones with the three subgiants on the (log T {sub eff}, M{sub V} ) diagram yielded ages of 12.08 ± 0.14, 12.56 ± 0.46, and 14.27 ± 0.38 Gyr for HD 84937, HD 132475, and HD 140283, in turn, where each error bar includes only the parallax uncertainty. The total uncertainty is estimated to be ∼ ± 0.8 Gyr (larger in the case of the near-turnoff star HD 84937). Although the age of HD 140283 is greater than the age of the universe as inferred from the cosmic microwave background by ∼0.4-0.5 Gyr, this discrepancy is at a level of <1σ. Nevertheless, the first Population II stars apparently formed very soon after the Big Bang. (Stellar models that neglect diffusive processes seem to be ruled out as they would predict that HD 140283 is ∼1.5 Gyr older than the universe.) The field halo subgiants appear to be older than globular clusters of similar metallicities: if distances close to those implied by the RR Lyrae standard candle are assumed, M 92 and M 5 are younger than HD 140283 and HD 132475 by ∼1.5 and ∼1.0 Gyr, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

High-temperature crystal structure and transport properties of the layered cuprates Ln{sub 2}CuO{sub 4}, Ln=Pr, Nd and Sm

High-temperature crystal structure of the layered cuprates Ln{sub 2}CuO{sub 4}, Ln=Pr, Nd and Sm with tetragonal T'-structure was refined using X-ray powder diffraction data. Substantial anisotropy of the thermal expansion behavior was observed in their crystal structures with thermal expansion coefficients (TEC) along a- and c-axis changing from TEC(a)/TEC(c){approx}1.37 (Pr) to 0.89 (Nd) and 0.72 (Sm). Temperature dependence of the interatomic distances in Ln{sub 2}CuO{sub 4} shows significantly lower expansion rate of the chemical bond between Pr and oxygen atoms (O1) belonging to CuO{sub 2}-planes (TEC(Pr-O1)=11.7 ppm K{sup -1}) in comparison with other cuprates: TEC (Nd-O1)=15.2 ppm K{sup -1} and TEC (Sm-O1)=15.1 ppm K{sup -1}. High-temperature electrical conductivity of Pr{sub 2}CuO{sub 4} is the highest one in the whole studied temperature range (298-1173 K): 0.1-108 S/cm for Pr{sub 2}CuO{sub 4}, 0.07-23 S/cm for Nd{sub 2}CuO{sub 4} and 2x10{sup -4}-9 S/cm for Sm{sub 2}CuO{sub 4}. The trace diffusion coefficient (D{sub T}) of oxygen for Pr{sub 2}CuO{sub 4} determined by isotopic exchange depth profile (IEDP) technique using secondary ion mass spectrometry (SIMS) varies in the range 7.2x10{sup -13} cm{sup 2}/s (973 K) and 3.8x10{sup -10} cm{sup 2}/s (1173 K) which are in between those observed for the manganese and cobalt-based perovskites. -- Graphical abstract: Anomaly anisotropic thermal expansion behavior was observed for Pr{sub 2}CuO{sub 4} in comparison with Ln{sub 2}CuO{sub 4}, Ln=Pr and Nd having tetragonal T'-structure with thermal expansion coefficients (TEC) along a- and c-axis changing from TEC(a)/TEC(c){approx}1.37 (Pr) to 0.89 (Nd) and 0.72 (Sm). It was found that the trace diffusion coefficient (D{sub T}) of oxygen in Pr{sub 2}CuO{sub 4} determined by secondary ion mass spectrometry (SIMS) varies in the range 7.2x10{sup -13} cm{sup 2}/s (973 K) and 3.8x10{sup -10} cm{sup 2}/s (1173 K) which are in between those observed for the manganese and cobalt-based perovskites. Display Omitted Research highlights: {yields} Anisotropic high-temperature thermal expansion behavior of T'-Ln{sub 2}CuO{sub 4}, Ln=Pr, Nd and Sm. {yields} Anomalous expansion behavior of Pr{sub 2}CuO{sub 4} in comparison with Ln{sub 2}CuO{sub 4}, Ln=Nd and Sm. {yields} High-temperature electrical conductivity of Pr{sub 2}CuO{sub 4} is higher in comparison with other T'-Ln{sub 2}CuO{sub 4}. {yields} Values of the oxygen trace diffusion coefficient for Pr{sub 2}CuO{sub 4} are between those reported for the Mn- and Co-based perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Study of Advanced Materials for Gas Turbine Coatings at Elevated Temperatures Using Selected Microstructures and Characteristic Environments for Syngas Combustion

Thermal barrier coatings (TBCs) that can be suitable for use in industrial gas turbine engines have been processed and compared with electron beam physical vapor deposition (EBPVD) microstructures for applications in advanced gas turbines that use coal-derived synthesis gas. Thermo-physical properties have been evaluated of the processed air plasma sprayed TBCs with standard APS-STD and vertically cracked APS-VC coatings samples up to 1300 C. Porosity of these selected coatings with related microstructural effects have been analyzed in this study. Wet and dry thermal cycling studies at 1125 C and spalling resistance thermal cycling studies to 1200 C have also been carried out. Type I and Type II hot corrosion tests were carried out to investigate the effects of microstructure variations and additions of alumina in YSZ top coats in multi-layered TBC structures. The thermal modeling of turbine blade has also been carried out that gives the capability to predict in-service performance temperature gradients. In addition to isothermal high temperature oxidation kinetics analysis in YSZ thermal barrier coatings of NiCoCrAlY bond coats with 0.25% Hf. This can affect the failure behavior depending on the control of the thermally grown oxide (TGO) growth at the interface. The TGO growth kinetics is seen to be parabolic and the activation energies correspond to interfacial growth kinetics that is controlled by the diffusion of O{sub 2} in Al{sub 2}O{sub 3}. The difference between oxidation behavior of the VC and STD structures are attributed to the effects of microstructure morphology and porosity on oxygen ingression into the zirconia and TGO layers. The isothermal oxidation resistance of the STD and VC microstructures is similar at temperatures up to 1200 C. However, the generally thicker TGO layer thicknesses and the slightly faster oxidation rates in the VC microstructures are attributed to the increased ingression of oxygen through the grain boundaries of the vertically cracked microstructures. The plasma sprayed TBC microstructure (VC and STD) with NiCoCrAlY-Hf bond coat are stable up to 1100 C. However, as with other TBC structures, a considerable amount of interdiffusion was observed in the different layers, although the TBC growth was self-limiting and parabolic. The addition of Hf to the VC microstructure appears to have some potential for the future development of robust TBCs with improved isothermal and service temperatures in advanced gas turbines.

33 ADVANCED PROPULSION SYSTEMS↗

Evaluation of functionalized isoreticular metal organic frameworks (IRMOFs) as smart nanoporous preconcentrators of RDX

Classical molecular dynamics (MD) and Grand Canonical Monte Carlo (GCMC) simulations were used to generate self-diffusivities, adsorption isotherms and density distributions for hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in five isoreticular metal-organic frameworks (IRMOFs), which varied in the cage size and in the presence and location of amine groups. These simulations were performed at room temperature (300 K) and low pressures (up to 1 ppm RDX). The atomic charges required for MD and GCMC simulations were calculated from quantum mechanical (QM) calculations using two different charge generation methods - Loewdin Population Analysis and Natural Bond Orbital Analysis. Both charge sets show that the presence of amine groups increases the amount of RDX adsorbed. The cage size and the location of amine groups also affect the loading of RDX. The amount of RDX adsorbed is correlated with the energy of adsorption. The activation energy for diffusion of RDX is not positively correlated with the energy of adsorption. The density distributions identify the location of the adsorption sites of RDX-exclusively in the big cage around the metal complex vertices and between benzene rings. In the absence of amine groups on the framework, one of nitro groups on RDX interacts closely with the metal complex. In the IRMOFs functionalized with amine groups, a second nitro group of the RDX interacts with an amine group, enhancing adsorption. With regard to the application as a smart nanoporous preconcentrator, these IRMOFs are found to concentrate RDX up to 3000 times compared to the gas phase, on a volumetric basis. From a simple Langmuir estimation, the selectivity of RDX over butane is up to 5000. The diffusion of RDX is sufficiently high for real time sensor applications. These results indicate IRMOFs can be tailored with functional groups to be highly selective nanoporous preconcentrators.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗