Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

MHD wave breaking in the outer plasmasphere

Empirical models of the average magnetospheric magnetic field, plasma density, and temperature distributions are used to construct a model of the distribution of MHD wave mode speeds within the magnetosphere. A persistent feature of the derived optical structure is a pronounced minimum of the wave speeds in the outer plasmasphere, i.e., a magnetospheric 'shoal'. This feature does not map along magnetic field lines, but is confined to the equatorial region, leading to a positive radial gradient of wave speeds near synchronous orbit. The breaking of earthward propagating disturbances in this region may play an essential role in the formation of the substorm injection boundary and in the creation of equatorially trapped warm ion distributions.

Moore, T. E.↗
NASA NTRS1987

Accurate pressure gradient calculations in hydrostatic atmospheric models

A method for the accurate calculation of the horizontal pressure gradient acceleration in hydrostatic atmospheric models is presented which is especially useful in situations where the isothermal surfaces are not parallel to the vertical coordinate surfaces. The present method is shown to be exact if the potential temperature lapse rate is constant between the vertical pressure integration limits. The technique is applied to both the integration of the hydrostatic equation and the computation of the slope correction term in the horizontal pressure gradient. A fixed vertical grid and a dynamic grid defined by the significant levels in the vertical temperature distribution are employed.

Carroll, John J.↗
NASA NTRS1987

Utilization of VAS satellite data in the initialization of an oceanic cyclogenesis simulation

A series of experiments was performed to test various methods of incorporating Visible Infrared Spin Scan Radiometer Atmospheric Sounder (VAS)-sounding data into the initial conditions of the Penn State University/National Center for Atmospheric mesoscale model. The VAS data for this ocean-cyclogenesis case consist of 110 irregularly distributed temperature and humidity soundings located over the North Pacific Ocean and apply at approximately 1200 GMT November 10, 1981. Various methods of utilizing VAS data in the initial condition of a mesoscale model were evaluated.

Douglas, Sharon G.↗
NASA NTRS1988

Infrared radiative transfer in dense disks around young stars

A two-dimensional radiative transfer program has been used to determine the temperature distribution within cylindrically symmetric, centrally heated dust clouds. In particular, the disk-shaped structures observed around young luminous stars have been modeled. Changing the dust distribution in these disks primarily affected the observed morphology in the near-infrared and far-infrared, and at millimeter wavelengths. The overall cloud spectrum, however, was mainly determined by the characteristics of the grains themselves. Comparison with published far-infrared and molecular line data has indicated that the dust density can generally be modeled by a power-law distribution in r with index of -2 and an exponential in z with disk thickness proportional to 1/r. When observed nearly edge-on, scattered direct stellar radiation is observed in the polar regions in the form of comet-shaped lobes of emission.

Dent, William R. F.↗
NASA NTRS1988

Aerodynamic investigation by infrared imaging

Infrared imaging systems can be used to measure temperatures of actively heated bodies immersed in an airstream. This monitoring of the convective heat transfer process, provides also information about the interaction between the body and the flow. The concept appeals to Nusselt/Reynolds numbers relations in order to produce data of interest from surface temperatures. Two test cases are presented and reference is made to analytical results: the mapping of a laminar jet and the temperature distribution along a constant power heated flat plate in laminar boundary layer regime. Although this research is currently focused on low speed aerodynamics, the extension to high speed aerodynamics, where the body undergoes frictional heating is of interest in this context, too.

Roberts, A. Sidney, Jr.↗
NASA NTRS1987

Using the thermal infrared multispectral scanner (TIMS) to estimate surface thermal responses

A series of measurements was conducted over the H.J. Andrews, Oregon, experimental coniferous forest, using airborne thermal infrared multispectral scanner (TIMS). Flight lines overlapped, with a 28-min time difference between flight lines. Concurrent radiosonde measurements of atmospheric profiles of air temperature and moisture were used for atmospheric radiance corrections of the TIMS data. Surface temperature differences over time between flight lines were used to develop thermal response numbers (TRNs) which characterized the thermal response (in KJ/sq m/C, where K is the measured incoming solar radiation) of the different surface types. The surface types included a mature forest (canopy dominated by dense crowns of Pseudosuga menziesii, with a secondary canopy of dense Tsuga heterophylla, and also a tall shrub layer of Acer circinatum) and a two-year-old clear-cut. The temperature distribution, within TIMS thermal images was found to reflect the surface type examined. The clear-cut surface had the lowest TRN, while mature Douglas fir the highest.

Luvall, J. C.↗
NASA NTRS1988

Three dimensional thermal analysis of rocket thrust chambers

A numerical model for the three-dimensional thermal analysis of rocket thrust chambers and nozzles has been developed. The input to the model consists of the composition of the fuel/oxidant mixture and flow rates, chamber pressure, coolant entrance temperature and pressure, dimensions of the engine, materials and the number of nodes in different parts of the engine. The model allows for temperature variation in three dimensions: axial, radial and circumferential directions and by implementing an iterative scheme, it provides nodal temperature distribution, rates of heat transfer, hot gas and coolant thermal and transport properties.

Naraghi, M. H. N.↗
NASA NTRS1988

Wall catalysis experiment on AFE

This paper describes the wall catalysis experiment which is planned as part of the Aeroassist Flight experiments (AFE) that will be flown from the Space Shuttle Orbiter in late 1993. Research on candidate high-catalytic efficiency overcoats for the experiment conducted in an arc-jet air stream are discussed. The temperature distribution over the AFE heat shield is also predicted using a reacting boundary layer solution that includes surface kinetics and optical properties determined from these tests.

Stewart, David A.↗
NASA NTRS1988

CSDUST3 - A radiation transport code for a dusty medium with 1-D planar, spherical or cylindrical geometry

The program solves the radiation transport problem in a dusty medium with one-dimensional planar, spherical or cylindrical geometry. It determines self-consistently the effects of multiple scattering, absorption, and re-emission of photons on the temperature of dust grains and the characteristics of the internal radiation field. The program can treat radiation field anisotropy, linear anisotropic scattering, and multi-grain components. The program output consists of the dust-temperature distribution, flux spectrum, surface brightness at each frequency and the observed intensities (involving a convolution with a telescope beam pattern).

Egan, Michael P.↗
NASA NTRS1988

An empirical model of the effects of curvature and convergence on dilution jet mixing

An existing empirical model of the temperature field downstream of single and multiple rows of jets injected into a confined crossflow has been extended to model the effects of curvature and convergence on the mixing. This extension is based on the results of a numerical study of these effects using a 3-D turbulent flow computer code. Temperature distributions calculated with the empirical model are presented to show the effects of flow area convergence, radius of curvature, and inner and outer wall injection for single and opposed rows of jets.

Holdeman, James D.↗
NASA NTRS1989

Reduction Of Stresses In Growing Silicon Webs

New trenched lid intercepts less radiation from edges of growing silicon ribbon, giving rise to faster growth and temperature distribution resulting in lower residual stress. Cutting trench in susceptor lid allows edges of growing ribbon of silicon to cool more rapidly. Edges cool and solidify nearly same rate as center of ribbon, and thermal stress in ribbon reduced. Because of more-effective edge cooling, wider ribbon grown, and withdrawn at faster rate. Productivity of dendritic-web growth furnace increased.

Duncan, C. S.↗
NASA NTRS1987

The direction of water transport on Mars: A possible pumping mechanism

It is suggested that an atmospheric pumping mechanism might be at work in which water is preferentially transported into the north by a mass outflow wind (due to sublimation from polar cap) that is stronger during southern spring than it is during northern spring. The mechanism is provided by the asymmetric seasonal temperature distribution produced by the eccentric martial orbit and by the associated seasonal asymmetry in the carbon dioxide cycle. The alternating condensation and sublimation of CO2 at the poles produces condensation winds which, in turn, contribute to the meridional transport of water vapor.

James, P. B.↗
NASA NTRS1988

Convective flows in enclosures with vertical temperature or concentration gradients

The transport process in the fluid phase during the growth of a crystal has a profound influence on the structure and quality of the solid phase. In vertical growth techniques the fluid phase is often subjected to vertical temperature and concentration gradients. The main objective is to obtain more experimental data on convective flows in enclosures with vertical temperature or concentration gradients. Among actual crystal systems the parameters vary widely. The parametric ranges studied for mass transfer are mainly dictated by the electrochemical system employed to impose concentration gradients. Temperature or concentration difference are maintained between two horizontal end walls. The other walls are kept insulated. Experimental measurements and observations were made of the heat transfer or mass transfer, flow patterns, and the mean and fluctuating temperature distribution. The method used to visualize the flow pattern in the thermal cases is an electrochemical pH-indicator method. Laser shadowgraphs are employed to visualize flow patterns in the solutal cases.

Wang, L. W.↗
NASA NTRS1989

Development of an infrared imaging system for the surface tension driven convection experiment

An infrared imaging system is used to quantify the imposed surface temperature distribution along a liquid/gas free surface in support of the Surface Tension Driven Convection Experiment, a planned Space Transportation System flight experiment. For ground-based work a commercially available instrument was used to determine the feasibility of using the type of imaging system for this experiment. The ground-based work was used as a baseline for compiling specifications for a flight qualified imager to be designed, fabricated, tested and qualified for flight. The requirements and specifications for the flight model are given along with the reasons for departures from the ground-based equipment. The flight qualification requirements discussed are a representative sample of the necessary procedures which must be followed to flight qualify diagnostic equipment for use aboard the STS. The potential problems and concerns associated with operating an imaging system in orbit are also discussed.

Pline, Alexander D.↗
NASA NTRS1988

Three dimensional thermal analysis of rocket thrust chambers

A numerical model for the three dimensional thermal analysis of rocket thrust chambers and nozzles has been developed. The input to the model consists of the composition of the fuel/oxidant mixture and flow rates, chamber pressure, coolant entrance temperature and pressure, dimensions of the engine, materials and the number of nodes in different parts of the engine. The model allows for temperature variation in three dimensions: axial, radial and circumferential directions and by implementing an iterative scheme, it provides nodal temperature distribution, rates of heat transfer, hot gas and coolant thermal and transport properties.

Naraghi, M. H. N.↗
NASA NTRS1989

An explicit Runge-Kutta method for turbulent reacting flow calculations

The paper presents a numerical method for the solution of the conservation equations governing steady, reacting, turbulent viscous flow in two-dimensional geometries, in both Cartesian and axisymmetric coordinates. These equations are written in Favre-averaged form and closed with a first order model. A two-equation K-epsilon model, where low Reynolds number and compressibility effects are included, and a modified eddy-break up model are used to simulate fluid mechanics turbulence, chemistry and turbulence-combustion interaction. The solution is obtained by using a pseudo-unsteady method with improved perturbation propagation properties. The equations are discretized in space by using a finite volume formulation. An explicit multi-stage dissipative Runge-Kutta algorithm is then used to advance the flow equations in the pseudo-time. The method is applied to the computation of both diffusion and premixed turbulent reacting flows. The computed temperature distributions compare favorably with experimental data.

Boretti, A. A.↗
NASA NTRS1987

Phase relations in iron-rich systems and implications for the earth's core

Recent experimental data concerning the properties of iron, iron sulfide, and iron oxide at high pressures are combined with theoretical arguments to constrain the probable behavior of the Fe-rich portions of the Fe-O and Fe-S phase diagrams. Phase diagrams are constructed for the Fe-S-O system at core pressures and temperatures. These properties are used to evaluate the current temperature distribution and composition of the core.

Anderson, William W.↗