Search NASA⌕ Search

SEARCH · Search NASA

Results for “Explosive detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Plasmoids, Flows, and Jets During Magnetic Reconnection in a Failed Filament Eruption

We report a detailed analysis of a flare/failed eruption in Active Region 12018 on April 3, 2014, using observations from SDO/AIA, IRIS, STEREO and Hinode/SOT. Initially, we observed multiple jets originating from the cusp of a large coronal bright point (null-point topology) 1-2 hours prior to the slow rise of a filament. The subsequent filament eruption, which was outside the IRIS field of view, was accompanied by a flare but remained confined. Multiple blobs were observed, most likely formed in a breakout current sheet near the cusp during the filament slow rise. During the explosive flare reconnection phase, plasmoids also appeared and moved bidirectionally (speed=100-285 km/s, periodicity~70 s) in the flare current sheet below the erupting filament. The tiny jet-like features in the fan loops were detected during the filament slow-rise/pre-flare phase associated with slow interchange/breakout reconnection at 3D null followed by multiple plasmoids moving along the fan-loops/separatrix. We will discuss why our interpretation is more robust than the nanoflare heating/flows suggested by Antolin et al. (2021).

P. Kumar↗

DETAILED RADIO VIEW ON TWO STELLAR EXPLOSIONS AND THEIR HOST GALAXY: XRF 080109/SN 2008D AND SN 2007uy in NGC 2770

The galaxy NGC 2770 hosted two core-collapse supernova (SN) explosions, SN 2008D and SN 2007uy, within 10 days of each other and 9 years after the first SN of the same type, SN 1999eh, was found in that galaxy. In particular, SN 2008D attracted a lot of attention due to the detection of an X-ray outburst, which has been hypothesized to be caused by either a (mildly) relativistic jet or the SN shock breakout. We present an extensive study of the radio emission from SN 2008D and SN 2007uy: flux measurements with the Westerbork Synthesis Radio Telescope and the Giant Metrewave Radio Telescope, covering {approx}600 days with observing frequencies ranging from 325 MHz to 8.4 GHz. The results of two epochs of global Very Long Baseline Interferometry observations are also discussed. We have examined the molecular gas in the host galaxy NGC 2770 with the Arizona Radio Observatory 12 m telescope, and present the implications of our observations for the star formation and seemingly high SN rate in this galaxy. Furthermore, we discuss the near-future observing possibilities of the two SNe and their host galaxy at low radio frequencies with the Low Frequency Array.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of the Ultimate One-Dimensional Time to Explosion (UODTX) Apparatus

With recent advancements in experimental capabilities and worldwide improvement of digital data acquisition and control, there is sufficient justification to develop a new version of the One Dimensional Time to eXplosion (ODTX) system to allow for additional diagnostics and improved control to increase sample throughput and increase the adaptability of future experiments. The legacy ODTX system was designed to measure time to explosion (TTX) for a given temperature, which it does well, but it was not equipped to handle the recent experimental advances of Pressure-ODTX (PODTX) and Composition-ODTX (CODTX). PODTX involves fielding a pressure transducer as an additional diagnostic and applying arbitrary heating-profiles to the system anvils. CODTX furthers this concept by including in-situ gas-composition analysis via infrared (IR) absorption techniques with plans to extend CODTX to solid composition detection and in-situ mass spectrometry (MS). The legacy ODTX system was not built with these experiments in mind and performing them involves substantial modifications and downtime to the existing machine. Developing a standalone system that can perform all C/P/ODTX experiments and is adaptable to unconceived experiments would allow for the continued use of ODTX as a work-horse for Small Scale Safety Testing (SSST), but also provide a testbed for new explosive safety research. This system would ultimately be housed in the neighboring ODTX cell and would live at the High Explosive Application Facility (HEAF) until the end of its service life. HEAF, Chemistry, and Engineering would be the primary stakeholders for the system’s design as they all have experiments that they want to perform. Engineering would be responsible for the system development and would work closely with HEAF to ensure that the system is built with high explosive (HE) safety in mind. By the end of development and after product realization, HEAF/Chemistry would be the system owner, operator, and primary user. The proposed system design is highly influenced by the existing ODTX design. The system will have load frame to support the experiment, anvils to confine the explosive, and some means of applying confining pressure. The samples will be able to be heated and cooled through the confining the anvils. The biggest change from the legacy design is the ability to add diagnostics to the experiment as needed: thermocouples (TCs), resistance temperature detectors (RTDs), pressure transducers (PTs), infrared transmittance/absorbance (IR), mass spectrometry (MS), strain gages (SGs), photonic doppler velocimeter (PDV), as well as arbitrary 4-20 mV signals and +/- 10 VDC signals. The current design does not allow for flexibility in that respect and is hardwired with a few diagnostic channels. The onus will fall on designing a load frame that can support system modifications as well as a data acquisition system that can handle the multitude of signal types.

36 MATERIALS SCIENCE↗

Investigating Vegetation Responses to Underground Nuclear Explosions Through Integrated Analyses

Vegetation has the potential to respond to underground nuclear explosions, yet these links have not been fully explored. Given the lack of previously described signatures, the changes in vegetation are possibly subtle. The integration of multiple different data streams is potentially a useful approach to improve signal detection. Here, we investigate whether semi-arid vegetation growth patterns responded to eight legacy underground nuclear tests at the Nevada National Security Site in southern Nevada, USA. We tested for spatial and temporal changes in vegetation cover, tree growth patterns, and tree leaf spectral properties using ground-based measurements, including those from tree-rings and hyperspectral surface vegetation reflectance, as well as space-based measurements of Normalized Difference Vegetation Index (NDVI) from Landsat. Multiple data streams suggest a localized (<1.2 km) spatial pattern whereby tree growth is enhanced closer to the source of the underground test relative to sites further away. We also observed a more regional (>1.2–9 km) pattern whereby tree growth is suppressed coincident with a drought beginning 1 year before the 1989 tests, but continuing in the 5 years following the tests, which is anomalous relative to what is expected based on the response of tree growth to previous droughts. furthermore, quantification of the relative effects of the tests on vegetation remains a challenge due to the coincident drought and the potential for other disturbances to have impacted tree growth at this time, but the integration of these data reveals a more nuanced growth response than any other one data set indicates alone.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

A real-time search for Type Ia Supernovae with late-time interactions with circumstellar material in ZTF data

While it is generally accepted that Type Ia supernovae (SNe Ia) are the terminal explosions of white dwarfs (WDs), the nature of their progenitor systems and the mechanisms that lead up to these explosions remain widely debated. In rare cases, the SN ejecta interact with circumstellar material (CSM) that had previously been ejected from the progenitor system. The longer the delay between the creation of the CSM and the SN explosion, the greater the distance between the SN explosion site and the CSM and the later the onset of the interaction. The unknown distance between the CSM and SN explosion site makes it impossible to predict when the interaction will start. If the time between the SN explosion and the onset of the CSM interaction is of the order of several months to years, the SN has generally faded and it is no longer actively followed up on. This makes it even more difficult to detect the interaction while it is happening. In this work, we report on a real-time monitoring programme running between 13 November 2023 and 9 July 2024. It monitored 6914 SNe Ia for signs of late-time rebrightening using the Zwicky Transient Facility (ZTF). Flagged candidates were rapidly followed up on with photometry and spectroscopy to confirm the late-time excess and its position. We report the discovery of a ∼50 day rebrightening event in SN 2020qxz around 1200 rest-frame days after the peak of its light curve. SN 2020qxz exhibited signs of an early CSM interaction, but had faded from view over two years before its reappearance. Initial follow-up spectroscopy revealed the presence of four emission lines, while later follow-up spectroscopy showed that these had faded shortly after the end of the ZTF-detected rebrightening event. Our best match for these emission lines are H β (blueshifted by ∼5900 km s −1 ) and Ca II λ8542 , N I λ8567 , and K I λλ8763, 8767 (all blueshifted by 5100 km s −1 ; although we note that the line identifications are uncertain). This shows that catching and following up on late-time interactions as they occur can offer new clues on the nature of the progenitor systems that produce these SNe by putting constraints on the possible type of donor star. The only way to do this systematically is to use large sky surveys such as ZTF and the upcoming Vera C. Rubin Observatory’s Legacy Survey of Space and Time (LSST) to monitor a large sample of objects for the rare events that reappear long after the object has faded from view.

circumstellar matter↗

CADIS and FW-CADIS Variance Reduction in Gamma Transport for Predicting Prompt Forensics Signatures

The goal of prompt nuclear forensics is to determine the characteristics of a nuclear detonation based on the signatures available almost immediately after the explosion. An important characteristic is the reaction time history (RTH), a measure of the device’s rate of neutron multiplication. The RTH can be estimated by observation of the gamma radiation emitted from the detonation, which can be detected directly or observed indirectly as Teller light. Gamma transport simulations used to predict these radiation fields are often modeled stochastically using the Monte Carlo N-Particle (MCNP) code, which can be a computationally demanding task due to the number of particle histories needed to achieve statistical convergence. In an attempt to improve the efficiency of these calculations, we evaluate two variance reduction techniques: Consistent Adjoint-Driven Importance Sampling (CADIS) and Forward-Weighted Consistent Adjoint-Driven Importance Sampling (FW-CADIS). These methods use a deterministically calculated adjoint flux to create weight windows and source biasing that guide MCNP sampling. We study the utility of CADIS and FW-CADIS for their use in MCNP gamma transport for nuclear forensics prediction simulations. Furthermore, the results demonstrate that both CADIS and FW-CADIS improve the accuracy for forensics-focused simulations, with CADIS being most beneficial in direct detection and FW-CADIS being ideal for computing a global Teller light source.

CADIS↗

Breakup of loosely bound nuclei at intermediate energies for nuclear astrophysics and the development of a position sensitive microstrip detector system and its readout electronics using ASICs technologies

The work performed under this grant has led to the development of a detection system that will be used to measure reaction rates for proton or neutron capture reactions at stellar energies on radioactive ions far from stability. The reaction rates are needed to better understand the physics of nucleosynthesis in explosive stellar processes such as supernovae and x-ray burst events. The radioactive ions will be produced at the Radioactive Ion Beam Facility (RIBF) at RIKEN near Tokyo, Japan. During the course of this work, the group involved in this project has expanded by several institutions in Europe and Japan and now involves collaborators from the U.S., Japan, Hungary, Romania, Germany, Spain, Italy, China, and South Korea. As part of the project, a novel design based on large-area silicon detectors has been built and tested and the performance characterized in a series of tests using particle beams with a variety of atomic numbers at the Cyclotron Institute of Texas A&M University and the Heavy Ion Medical Accelerator in Chiba facility (HIMAC) in Chiba, Japan. The work has involved mechanical construction of a special purpose vacuum chamber, with a precision mounting system for the silicon detectors, development of a new ASICs readout system that has applications with a wide variety of silicon detector systems, and the development of a data acquisition system that is integrated into the computer system being used at RIBF. The parts noted above that are needed to carry out the research program are completed and ready for installation. Several approved experiments that will use this system will be carried out in the near future. The experimental work has been delayed due to a large increase in the cost and availability of electrical power for RIBF that occurred following the massive earthquake and tsunami that hit Japan in the spring of 2011. Another component of the research carried out with this grant involved developing the theoretical tools that are required to extract the information from the experiments that is needed to determine the stellar reaction rates. The tools developed through this part of the work will be made freely available for general use.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Breakup of loosely bound nuclei at intermediate energies for nuclear astrophysics and the development of a position sensitive microstrip detector system and its readout electronics using ASICs technologies

The work performed under this grant has led to the development of a detection system that will be used to measure reaction rates for proton or neutron capture reactions at stellar energies on radioactive ions far from stability. The reaction rates are needed to better understand the physics of nucleosynthesis in explosive stellar processes such as supernovae and x-ray burst events. The radioactive ions will be produced at the Radioactive Ion Beam Facility (RIBF) at RIKEN near Tokyo, Japan. During the course of this work, the group involved in this project has expanded by several institutions in Europe and Japan and now involves collaborators from the U.S., Japan, Hungary, Romania, Germany, Spain, Italy, China, and South Korea. As part of the project, a novel design based on large-area silicon detectors has been built and tested. The work has involved mechanical construction of a special purpose vacuum chamber, with a precision mounting system for the silicon detectors, development of a new ASICs readout system that has applications with a wide variety of silicon detector systems, and the development of a data acquisition system that is integrated into the computer system being used at RIBF. The parts noted above that are needed to carry out the research program are completed and ready for installation. Several approved experiments that will use this system will be carried out in the near future. The experimental work has been delayed due to a large increase in the cost and availability of electrical power for RIBF that occurred following the massive earthquake and tsunami that hit Japan in the spring of 2011. Another component of the research carried out with this grant involved developing the theoretical tools that are required to extract the information from the experiments that is needed to determine the stellar reaction rates. The tools developed through this part of the work will be made freely available for general use.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structure of Nuclei Far From Stability

The work performed under this grant has led to the development of a detection system that will be used to measure reaction rates for proton or neutron capture reactions at stellar energies on radioactive ions far from stability. The reaction rates are needed to better understand the physics of nucleosynthesis in explosive stellar processes such as supernovae and X-ray burst explosions. The radioactive ions will be produced at the Radioactive Ion Beam Facility (RIBF) at RIKEN near Tokyo, Japan. During the course of this work, the group involved in this project has expanded by several institutions in Europe and Japan and now involves collaborators from the U.S., Japan, Hungary, Romania, Germany, Spain, Italy, China, and South Korea. As part of the project, a novel design based on large-area silicon detectors has been built and tested and the performance characterized in a series of tests using particle beams with a variety of atomic numbers at the Cyclotron Institute of Texas A&M University and the Heavy Ion Medical Accelerator in Chiba facility (HIMAC) in Chiba, Japan. The work has involved mechanical construction of a special purpose vacuum chamber, with a precision mounting system for the silicon detectors, development of a new ASICs readout system that has applications with a wide variety of silicon detector systems, and the development of a data acquisition system that is integrated into the computer system being used at RIBF. The parts noted above that are needed to carry out the research program are completed and ready for installation. Several approved experiments that will use this system will be carried out in the near future. The experimental work has been delayed due to a large increase in the cost and availability of electrical power for RIBF that occurred following the massive earthquake and tsunami that hit Japan in the spring of 2011. Another component of the research carried out with this grant involved developing the theoretical tools that are required to extract the information from the experiments that is needed to determine the stellar reaction rates. The tools developed through this part of the work will be made freely available for general use.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Introduction to the Consortium for Monitoring, Technology, and Verification (MTV) [Slides]

Our mission is to develop new technologies that detect and deter nuclear proliferation activities while training the next generation of nuclear professionals. The three technical thrust areas are: 1. Fundamentals of nuclear and particle physics, 2. Signals and source terms for nuclear nonproliferation, and 3. Nuclear explosion. There are opportunities for collaborations with university faculty, possible student and post-doc work, and posting job ads. Further, MTV hosts various workshops, symposiums.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Advanced Inversion Algorithms for Scientific Data Analysis [Slides]

Accurate subsurface characterization is crucial for all subsurface energy exploration. Accurate characterization of uncertain subsurface properties is also critical for monitoring storage of CO 2 , estimating pathways of subsurface contaminant transport, and monitoring potential nuclear explosions for treaty verification. This research will advance our world-leading subsurface sensing capabilities that are crucial for LANL missions in energy security (geothermal energy, oil/gas resource exploration, geologic carbon storage) and nuclear security (facility monitoring, detonation detection).

47 OTHER INSTRUMENTATION↗

Cold Metal Transfer (CMT) Wire-Arc Additive Manufacturing (WAAM)

Aluminum has been identified as a compound within regolith and is likely to become a core component of our infrastructure on the lunar surface as in-situ resource utilization (ISRU) capabilities are advanced Large-scale components, outfitting, and repairs of aluminum materials can be fabricated with robotic wire arc additive manufacturing (WAAM) in order to inhabit the moon’s surface long term WAAM is a high value process for lunar advanced manufacturing as it does not require special containment to reduce explosion hazards such as powder-based additive processes and feedstock The welding process of cold metal transfer (CMT) is a relatively new variation of gas metal arc welding (GMAW, also known as MIG) that relies on the detection of a short circuit in the welding process to control the deposition droplet action, resulting in lower heat input and splatter compared to conventional MIG welding The past year was spent developing the CMT-WAAM process for aluminum materials, tested specialty feedstock, tested within the high vacuum environment, and advanced the MSFC capability to perform complex toolpathing from solid models Upcoming and future work includes large depositions working towards material certification for multiple feedstocks, in-situ monitoring, work to use recycled materials for the AM feedstock, and the design and fabrication of a parabolic flight experiment payload.

cold metal transfer↗

Ultrafast table-top dynamic radiography of spontaneous or stimulated events

Disclosed herein are representative embodiments of methods, apparatus, and systems for performing radiography. For example, certain embodiments concern X-ray radiography of spontaneous events. Particular embodiments of the disclosed technology provide continuous high-speed x-ray imaging of spontaneous dynamic events, such as explosions, reaction-front propagation, and even material failure. Further, in certain embodiments, x-ray activation and data collection activation are triggered by the object itself that is under observation (e.g., triggered by a change of state detected by one or more sensors monitoring the object itself).

36 MATERIALS SCIENCE↗

Weapons of Mass Destruction Technology Evaluation and Training Range

The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testing capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Investigating the Effectiveness of P/S Amplitude Ratios for Local Distance Event Discrimination

The ability to discriminate between underground explosions and earthquakes is an important operation for global security and test-ban-treaty monitoring, and seismology plays a key role in this endeavor. The use of seismic P- to S-wave amplitude ratios has been demonstrated to be an effective discriminant at regional distances for a variety of emplacement conditions and test sites around the world. Increasing interest in detecting and discriminating smaller events, both for purposes of nuclear monitoring and seismic hazard estimation, requires the use of data with shorter event-to-station paths. At these local distances (≤ 200 km), the use of P/S ratios for event discrimination is poorly studied compared with regional distances (200-1500 km). The path averaging that allows for relatively simple corrections to P/S ratios to remove bias from along-path structural differences at regional distances may be insufficient to remove enough scatter from the ratios to allow for accurate event identification at local distances. We use data from a series of chemical explosions detonated as part of the Source Physics Experiment at the Nevada National Security Site in southern Nevada and surrounding seismicity to investigate the discrimination performance of P/S ratios at local distances. We find that discrimination at individual stations is highly variable, regardless of frequency. Network averaging of ratios improves discrimination performance above 6 Hz, as a result of the reduction of scatter among the earthquake ratios. Furthermore, azimuthal and distance–limited averaging suggests that explosion ratios are affected by a complicated source and path relationship that may lead to substantial variability in local P/S ratios at different locations.

58 GEOSCIENCES↗

NTT, SPITZER, AND CHANDRA SPECTROSCOPY OF SDSSJ095209.56+214313.3: THE MOST LUMINOUS CORONAL-LINE SUPERNOVA EVER OBSERVED, OR A STELLAR TIDAL DISRUPTION EVENT?

The galaxy SDSSJ095209.56+214313.3 (SDSSJ0952+2143 hereafter) showed remarkable emission-line and continuum properties and strong emission-line variability first reported in 2008 (Paper I). The spectral properties and low-energy variability are the consequence of a powerful high-energy flare which was itself not observed directly. Here we report follow-up optical, near-infrared (NIR), mid-infrared (MIR), and X-ray observations of SDSSJ0952+2143. We discuss outburst scenarios in terms of stellar tidal disruption by a supermassive black hole, peculiar variability of an active galactic nucleus (AGN), and a supernova (SN) explosion, and possible links between these scenarios and mechanisms. The optical spectrum of SDSSJ0952+2143 exhibits several peculiarities: an exceptionally high ratio of [Fe VII] transitions over [O III], a dramatic decrease by a factor of 10 of the highest-ionization coronal lines, a very unusual and variable Balmer line profile including a triple-peaked narrow component with two unresolved horns, and a large Balmer decrement. The MIR emission measured with the Spitzer IRS in the narrow 10-20 {mu}m band is extraordinarily luminous and amounts to L {sub 10-20{mu}}{sub m} = 3.5 x 10{sup 43} erg s{sup -1}. The IRS spectrum shows a bump around {approx}11 {mu}m and an increase toward longer wavelengths, reminiscent of silicate emission. The strong MIR excess over the NIR implies the dominance of relatively cold dust. The pre- and post-flare NIR host galaxy colors indicate a nonactive galaxy. The X-ray luminosity of L {sub x,0.1-10keV} = 10{sup 41} erg s{sup -1} measured with Chandra is below that typically observed in AGNs. Similarities of SDSSJ0952+2143 with some extreme SNe suggest the explosion of a SN of Type IIn. However, an extreme accretion event in a low-luminosity AGN or inactive galaxy, especially stellar tidal disruption, remain possibilities, which could potentially produce a very similar emission-line response. If indeed a SN, SDSSJ0952+2143 is one of the most distant X-ray- and MIR-detected SNe known so far, the most MIR luminous, and one of the most X-ray luminous. It is also by far the most luminous (>10{sup 40} erg s{sup -1}) in high-ionization coronal lines, exceeding previous SNe by at least a factor of 100.

99 GENERAL AND MISCELLANEOUS↗

Seismo-Acoustic Wave Simulation for the 2016 Kumamoto Earthquake

It is well known that underground explosions or earthquakes can generate infrasound in the atmosphere. Seismoacoustic coupling between the ground motions and atmosphere is a key mechanism for infrasound generation. Epicentral infrasound which is direct response to epicentral ground motions are extensively studied for event detection and discrimination. Diffracted infrasound generated from Rayleigh waves are often observed and reported. Recent studies suggested the surface topography is also important for infrasound generation, and mountains or topographic peaks can act as effective secondary infrasound sources. In this study, we perform full 3-D seismoacoustic simulations to understand a coupled seismic and acoustic wave generation by an earthquake and energy partitioning across the solid Earth-ocean-atmosphere system. By including the effects of realistic topography, bathymetry, and earthquake focal mechanism, we provide quantitative information about seismoacoustic wavefields and secondary infrasound sources across the solid-water, solid-air, and water-air interfaces. Acoustic wave transmission across water-air interface is also investigated by using synthetic waveforms. Our study suggests that shallow seas near the coastline or over elevated seafloors can transmit significant amount of energy from acoustic waves in water and can be effective secondary infrasound sources.

58 GEOSCIENCES↗

Seismo-Acoustic Wave Simulation for Earthquake-Generated Infrasound

It is well known that underground explosions or earthquakes can generate infrasound in the atmosphere. Seismoacoustic coupling between the ground motions and atmosphere is a key mechanism for infrasound generation. Epicentral infrasound which is direct response to epicentral ground motions are extensively studied for event detection and discrimination. Diffracted infrasound generated from Rayleigh waves are often observed and reported. Recent studies suggested the surface topography is also important for infrasound generation, and mountains or topographic peaks can act as effective secondary infrasound sources. In this study, we perform full 3-D seismoacoustic simulations to understand a coupled seismic and acoustic wave generation by an earthquake and energy partitioning across the solid Earthocean-atmosphere system. By including the effects of realistic topography, bathymetry, and earthquake focal mechanism, we provide quantitative information about seismoacoustic wavefields and secondary infrasound sources across the solid-water, solid-air, and water-air interfaces. Acoustic wave transmission across water-air interface is also investigated by using synthetic waveforms. Our study suggests that shallow seas near the coastline or over elevated seafloors can transmit significant amount of energy from acoustic waves in water and can be effective secondary infrasound sources.

58 GEOSCIENCES↗