Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLAME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Detailed investigation of a pulverized fuel swirl flame in CO{sub 2}/O{sub 2} atmosphere

A novel approach to oxycoal flame stabilization has been developed at the Institute of Heat and Mass Transfer at RWTH Aachen University [D. Toporov, M. Foerster, R. Kneer, in: Third Int. Conf. on Clean Coal Technologies for Our Future, Cagliari, Sardinia, Italy, 15-17 May 2007]. The swirl burner design and its operating conditions have been adjusted in order to enforce CO formation thus stabilizing the flame and obtaining a full burnout at levels of O{sub 2} content in the O{sub 2}/CO{sub 2} mixture similar to those in air. The paper presents results of detailed numerical and experimental investigations of a stable oxy-fired pulverized coal swirl flame (type-2) obtained with a 21 vol% O{sub 2} concentration. The combustion tests were performed in a vertical pilot-scale furnace (100 kW{sub th}) in the framework of the OXYCOAL-AC research project aiming to develop a membrane-based oxyfuel process. The experimental results concerning gas velocities, gas and particle temperatures, and gas compositions are presented and discussed, focusing on the underlying mechanisms as well as on the aerodynamics of the oxycoal flame. A comparison between measurements and simulations has shown the validity of the numerical method used. The reported data set can be used for validation of numerical models developed for prediction of oxyfuel combustion. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental study of ethylene counterflow diffusion flames perturbed by trace amounts of jet fuel and jet fuel surrogates under incipiently sooting conditions

The structure of an ethylene counterflow diffusion flame doped with 2000 ppm on a molar basis of either jet fuel or two jet fuel surrogates is studied under incipient sooting conditions. The doped flames have identical stoichiometric mixture fractions (z{sub f} = 0.18) and strain rates (a = 92 s{sup -1}), resulting in a well-defined and fixed temperature/time history for all of the flames. Gas samples are extracted from the flame with quartz microprobes for subsequent GC/MS analysis. Profiles of critical fuel decomposition products and soot precursors, such as benzene and toluene, are compared. The data for C7-C12 alkanes are consistent with typical decomposition of large alkanes with both surrogates showing good qualitative agreement with jet fuel in their pyrolysis trends. Olefins are formed as the fuel alkanes decompose, with agreement between the surrogates and jet fuel that improves for small alkenes, probably because of an increase in kinetic pathways which makes the specifics of the alkane structure less important. Good agreement between jet fuel and the surrogates is found with respect to critical soot precursors such as benzene and toluene. Although the six-component Utah/Yale surrogate performs better than the Aachen surrogate, the latter performs adequately and retains the advantage of simplicity, since it consists of only two components. The acetylene profiles present a unique multimodal behavior that can be attributed to acetylene's participation in early stages of formation of soot precursors, such as benzene and other large pyrolysis products, as well as in the surface growth of soot particles. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and computational study of methane counterflow diffusion flames perturbed by trace amounts of either jet fuel or a 6-component surrogate under non-sooting conditions

The chemical structure of a methane counterflow diffusion flame and of the same flame doped with 1000 ppm (molar) of either jet fuel or a 6-component jet fuel surrogate was analyzed experimentally, by gas sampling via quartz microprobes and subsequent GC/MS analysis, and computationally using a semi-detailed kinetic mechanism for the surrogate blend. Conditions were chosen to ensure that all three flames were non-sooting, with identical temperature profiles and stoichiometric mixture fraction, through a judicious selection of feed stream composition and strain rate. The experimental dataset provides a glimpse of the pyrolysis and oxidation behavior of jet fuel in a diffusion flame. The jet fuel initial oxidation is consistent with anticipated chemical kinetic behavior, based on thermal decomposition of large alkanes to smaller and smaller fragments and the survival of ring-stabilized aromatics at higher temperatures. The 6-component surrogate captures the same trend correctly, but the agreement is not quantitative with respect to some of the aromatics such as benzene and toluene. Various alkanes, alkenes and aromatics among the jet fuel components are either only qualitatively characterized or could not be identified, because of the presence of many isomers and overlapping spectra in the chromatogram, leaving 80% of the carbon from the jet fuel unaccounted for in the early pyrolysis history of the parent fuel. Computationally, the one-dimensional code adopted a semi-detailed kinetic mechanism for the surrogate blend that is based on an existing hierarchically constructed kinetic model for alkanes and simple aromatics, extended to account for the presence of tetralin and methylcyclohexane as reference fuels. The computational results are in reasonably good agreement with the experimental ones for the surrogate behavior, with the greatest discrepancy in the concentrations of aromatics and ethylene. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Formation and consumption of NO in H{sub 2} + O{sub 2} + N{sub 2} flames doped with NO or NH{sub 3} at atmospheric pressure

Flat premixed burner-stabilized H{sub 2} + O{sub 2} + N{sub 2} flames, neat or doped with 300-1000 ppm of NO or NH{sub 3}, were studied experimentally using molecular-beam mass-spectrometry and simulated numerically. Spatial profiles of temperature and concentrations of stable species, H{sub 2}, O{sub 2}, H{sub 2}O, NO, NH{sub 3}, and of H and OH radicals obtained at atmospheric pressure in lean ({phi} = 0.47), near-stoichiometric ({phi} = 1.1) and rich ({phi} = 2.0) flames are reported. Good agreement between measured and calculated structure of lean and near-stoichiometric flames was found. Significant discrepancy between simulated and measured profiles of NO concentration was observed in the rich flames. Sensitivity and reaction path analyses revealed reactions responsible for the discrepancy. Modification to the model was proposed to improve an overall agreement with the experiment. (author)

08 HYDROGEN↗

A lean methane premixed laminar flame doped with components of diesel fuel part III: Indane and comparison between n-butylbenzene, n-propylcyclohexane and indane

To better understand the chemistry of the combustion of components of diesel fuel, the structure of a laminar lean premixed methane flame doped with indane has been investigated. The inlet gases contained 7.1% (molar) of methane, 36.8% of oxygen and 0.9% of indane corresponding to an equivalence ratio of 0.67 and a ratio C{sub 10}H{sub 14}/CH{sub 4} of 12.8%. The flame has been stabilized on a burner at a pressure of 6.7 kPa (50 Torr) using argon as diluent, with a gas velocity at the burner of 49.1 cm s{sup -1} at 333 K. Quantified species included the usual methane C{sub 0}-C{sub 2} combustion products, but also 16 C{sub 3}-C{sub 5} non-aromatic hydrocarbons, 6 C{sub 1}-C{sub 3} non-aromatic oxygenated compounds, as well as 22 aromatic products, namely benzene, toluene, xylenes, phenylacetylene, ethylbenzene, styrene, propenylbenzene, allylbenzene, n-propylbenzene, methylstyrenes, ethyltoluenes, trimethylbenzenes, n-butylbenzene, dimethylethylbenzene, indene, methylindenes, methylindane, benzocyclobutene, naphthalene, phenol, benzaldehyde, and benzofuran. A new mechanism for the oxidation of indane was proposed whose predictions were in satisfactory agreement with measured species profiles in both flames and jet-stirred reactor experiments. The main reaction pathways of consumption of indane have been derived from flow rate analyses in the two types of reactors. A comparison of the effect of the addition of three components of diesel fuel, namely indane, n-butylbenzene and n-propylcyclohexane (parts I and II of this series of paper), on the structure of a laminar lean premixed methane flame is also presented. (author)

02 PETROLEUM↗

Stationary edge flames in a wedge with hydrodynamic variable-density interaction

The behavior of nonpremixed edge flames to low and high strains in a wedge-shaped region are simulated and studied in detail. The chemistry is modeled by a one-step mechanism and transport by constant coefficient Fickian diffusion, as a qualitative model describing the physical mechanisms in the thermochemistry of combustion of hydrocarbon fuels. The reactive zero-Mach-number Navier-Stokes equations are used to describe the flow, both in a thermodiffusive regime (constant density) and a hydrodynamically-coupled regime (variable density). This configuration is an adaptation of the experimental opposed inclined jet geometry long used at the University of Southern California, but made stationary by the addition of a sink at the apex of the wedge. This crucial modification enables the stable presence of stationary edge flames, and it allows the study of advancing and retreating edge flames in the low and high strain regimes. The dependence of the edge flames speed on strain rate, stoichiometry, and Lewis numbers is discussed and compared to previous studies.

42 ENGINEERING↗

Evaluation of semi-empirical soot models for nonpremixed flames with increased stoichiometric mixture fraction and strain

Due to the size and complexity of industrial-scale systems and computing limitations, semi-empirical soot models are often employed in CFD simulations rather than computationally-expensive detailed models. Many of these models were developed for specific applications with unique characteristic timescales and/or validated only under fuel-air combustion conditions. Hence, their use in different contexts, such as oxy-combustion, could lead to inaccurate predictions. In this study, twelve semi-empirical models (1-step or 2-step) are evaluated on their ability to respond to changes in stoichiometric mixture fraction (Z st ) and strain in a series of ethylene counterflow flames which span the experimental sooting-to-non-sooting (yellow to blue) transition. A unique approach of plotting soot formation rate in normalized, local equivalence ratio space is introduced to aid in the analysis. Results show that no existing model is able to predict a blue flame when Z st is increased beyond the experimentally-measured sooting limit. Many models give the counter-intuitive result of increasing peak and/or integrated soot volume fraction (svf) as Z st increased, contrary to experimental observations. Two models are able to successfully predict a blue flame upon increase of strain to the sooting limit value. For two-step models, the strong dependence of growth rate on surface area results in high sensitivity of svf to changing flame boundary conditions, but with mixed accuracy. There is still a significant need for a robust semi-empirical model which can accurately predict soot fraction in systems with oxygen-enrichment or variable strain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of operating pressure on flame oscillation and emission characteristics in a partially premixed swirl combustor

The influence of varying combustor pressure on flame oscillation and emission characteristics in the partially premixed turbulent flame were investigated. In order to investigate combustion characteristics in the partially premixed turbulent flame, the combustor pressure was controlled in the range of -30 to 30 kPa for each equivalence ratio ({phi} = 0.8-1.2). The r.m.s. of the pressure fluctuations increased with decreasing combustor pressure for the lean condition. The combustor pressure had a sizeable influence on combustion oscillation, whose dominant frequency varied with the combustor pressure. Combustion instabilities could be controlled by increasing the turbulent intensity of the unburned mixture under the lean condition. An unstable flame was caused by incomplete combustion; hence, EICO greatly increased. Furthermore, EINO{sub x} simply reduced with decreasing combustor pressure at a rate of 0.035 g/10 kPa. The possibility of combustion control on the combusting mode and exhaust gas emission was demonstrated. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ignition of non-premixed counterflow flames of octane and decane isomers

We report ignition temperatures of non-premixed flames of octane and decane isomers were determined in the counterflow configuration at atmospheric pressure, a free-stream fuel/N 2 mixture temperature of 401 K, a local strain rate of 130 s –1 , and fuel mole fractions ranging from 1% to 6%. The experiments were modeled using detailed chemical kinetic mechanisms for all isomers that were combined with established H 2 , CO, and n-alkane models, and close agreements were found for all flames considered. The results confirmed that increasing the degree of branching lowers the ignition propensity. On the other hand, increasing the straight chain length by two carbons was found to have no measurable effect on flame ignition for symmetric branched fuel structures. Detailed sensitivity analyses showed that flame ignition is sensitive primarily to the H 2 /CO and C 1 –C 3 hydrocarbon kinetics for low degrees of branching, and to fuel-related reactions for the more branched molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topology of pocket formation in turbulent premixed flames

In turbulent premixed flame propagation, the formation of isolated pockets of reactants or products is associated with flame pinch–off events which cause rapid changes in the flame surface area. Previous topological analysis of these phenomena has been carried out based on Morse theory and Direct Numerical Simulation (DNS) in two spatial dimensions. The present work extends the topological analysis to three dimensions with emphasis on the formation and subsequent burnout of reactant pockets. Singular behaviour observed previously for terms of the Surface Density Function (SDF) transport equation in the two–dimensional case is shown to occur also in three dimensions. Further singular behaviour is observed in the displacement speed close to reactant pocket burnout. In conclusion, the theory is compared against DNS data from hydrogen–air flames and good agreement is obtained.

42 ENGINEERING↗

Investigation of the ignition processes of a multi-injection flame in a Diesel engine environment using the flamelet model

In this paper, the first flamelet analysis is conducted of a highly resolved DNS of a multi-injection flame with both auto-ignition and ignition induced by flame-flame interaction. A novel method is proposed to identify the different combustion modes of ignition processes using generalized flamelet equations. The state-of-the-art DNS database generated by Rieth et al. (US National Combustion Meeting, 2019) for a multi-injection flame in a Diesel engine environment is investigated. Three-dimensional flamelets are extracted from the DNS at different time instants with a focus on auto-ignition and interaction-ignition processes. The influences of mixture field interactions and the scalar dissipation rate on the ignition process are investigated by varying the species composition boundary conditions of the transient flamelet equations. Budget analyses of the generalized flamelet equations show that the transport along the mixture fraction iso-surface is insignificant during the auto-ignition process, but becomes important when interaction-ignition occurs, which is further confirmed through a flamelet regime classification method.

42 ENGINEERING↗

EFFECTS OF MAGNETIC FIELDS ON THE PROPAGATION OF NUCLEAR FLAMES IN MAGNETIC WHITE DWARFS

We investigate the effects of the magnetic field on the propagation of laminar flames of nuclear reactions taking place in white dwarfs with masses close to the Chandrasekhar limit. We calculate the velocities of laminar flames parallel and perpendicular to uniform magnetic fields as eigenvalues of steady solutions for magnetic hydrodynamical equations. As a result, we find that even when the magnetic pressure does not dominate the entire pressure it is possible for the magnetic field to suppress the flame propagation through the thermal conduction. Above the critical magnetic field, the flame velocity decreases with increasing magnetic field strength as v {approx} B{sup -1}. In media with densities of 10{sup 7}, 10{sup 8}, and 10{sup 9} g cm{sup -3}, the critical magnetic fields are orders of {approx}10{sup 10}, 10{sup 11}, and 10{sup 12} G, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗

The Influence of Pressure on Flame-Flow Characteristics of a Reacting Jet in Crossflow

This work experimentally investigates the effects of elevated combustor pressures on the characteristics of a lean premixed reacting methane/air jet injected into a lean vitiated crossflow using a 12.7 mm axial jet. Experiments were conducted in an axially staged combustor, which implements a reacting jet in crossflow (RJIC) configuration and operates over a pressure range of 1–5 atmospheres. Simultaneous CH* chemiluminescence and particle image velocimetry (PIV) are used to study the flow field and flame behavior. The results show that the reacting jet trajectory exhibits greater penetration with elevated pressure, which is a novel finding compared to available data in the literature. However, the flame liftoff point and ignition delay time both decreased with elevated pressure, which was attributed to decreased vorticity along the flame boundary which corresponds to increased Damköhler numbers (Da). Emissions measurements confirm the NOx increase with pressure as reported in the literature for single-stage gas turbine combustors. Concurrently, emission measurements for the staged configuration show the strong NOx benefit of the RJIC system: the data prove a reduction of global outlet emission levels at elevated pressure with the axially staged configuration. Here, the axial emission reduction was attributed to the decreasing liftoff at elevated pressure levels. Hence, the research emphasizes that the flame and emission characteristics are coupled; they are not only dependent on the geometric parameters and momentum flux ratios but are also a function of pressure.

03 NATURAL GAS↗

Turbulent flame-wall interaction: a DNS study

A turbulent flame-wall interaction (FWI) configuration is studied using three-dimensional direct numerical simulation (DNS) and detailed chemical kinetics. The simulations are used to investigate the effects of the wall turbulent boundary layer (i) on the structure of a hydrogen-air premixed flame, (ii) on its near-wall propagation characteristics and (iii) on the spatial and temporal patterns of the convective wall heat flux. Results show that the local flame thickness and propagation speed vary between the core flow and the boundary layer, resulting in a regime change from flamelet near the channel centreline to a thickened flame at the wall. This finding has strong implications for the modelling of turbulent combustion using Reynolds-averaged Navier-Stokes or large-eddy simulation techniques. Moreover, the DNS results suggest that the near-wall coherent turbulent structures play an important role on the convective wall heat transfer by pushing the hot reactive zone towards the cold solid surface. At the wall, exothermic radical recombination reactions become important, and are responsible for approximately 70% of the overall heat release rate at the wall. Spectral analysis of the convective wall heat flux provides an unambiguous picture of its spatial and temporal patterns, previously unobserved, that is directly related to the spatial and temporal characteristic scalings of the coherent near-wall turbulent structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Investigation of the Flame-Burden Interaction during Remelting in an Experimental Aluminum Reverbatory Furnace

Flame impingement on the burden is routinely encountered during the initial phase of melting in aluminum reverberatory furnaces. This impingement causes an obstructed pathway for the hot gases, and hence the circulation and residence time of the hot gases are greatly impacted. Moreover, as the load melts, the flames gradually achieve an unobstructed path leading to reduced gas residence times. This flame impingement and constantly changing combustion space volume will lead to vastly different fuel and oxidizer mixing patterns and thus affect the overall furnace performance. Fine tuning the burner operating conditions such as flow rates and injection angles with the changing combustion space could result in significant improvements to the furnace efficiency. However, one has to gain a better understanding of the furnace dynamics to know the suitable parameters to adjust. Physical modeling can be elaborate and expensive to conduct on a regular basis while Computational Fluid Dynamics (CFD) can cost-effectively address this challenge. In this study, the furnace model is created with a particular loading pattern to understand the flame dynamics in the presence of a piled load. This configuration can be thought of as a computational model of the furnace with the burden at a particular stage of the melting process. Thermal efficiency and behavior of the furnace are quantified and the predicted values are compared with the operational data from an experimental reverberatory furnace.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Resolving Hysteresis in Perovskite Solar Cells with Rapid Flame-Processed Cobalt-Doped TiO 2

To further increase the open–circuit voltage ( V oc ) of perovskite solar cells (PSCs), many efforts have been devoted to doping the TiO 2 electron transport/selective layers by using metal dopants with higher electronegativity than Ti. However, those dopants can introduce undesired charge traps that hinder charge transport through TiO 2 , so the improvement in the V oc is often accompanied by an undesired photocurrent density–voltage ( J–V ) hysteresis problem. Herein, it is demonstrated that the use of a rapid flame doping process (40 s) to introduce cobalt dopant into TiO 2 not only solves the J–V hysteresis problem but also increases the V oc and power conversion efficiency of both mesoscopic and planar PSCs. The reasons for the simultaneous improvements are two fold. First, the flame–doped Co–TiO 2 film forms Co–O v (cobalt dopant–oxygen vacancy) pairs and hence reduces the number density of Ti 3+ trap states. Second, Co doping upshifts the band structure of TiO 2 , facilitating efficient charge extraction. As a result, for planar PSCs, the flame doping of Co increases the efficiency from 17.1% to 18.0% while reducing the hysteresis from 16.0% to 1.7%. Here, for mesoscopic PSCs, the flame doping of Co increases the efficiency from 18.5% to 20.0% while reducing the hysteresis from 7.0% to 0.1%.

36 MATERIALS SCIENCE↗

Flame aerosol synthesis of hollow alumina nanoshells for application in thermal insulation

Commercial implementation of hollow nanoshell materials is often limited by difficult scale-up and high cost. Here we present a scalable, continuous, and potentially low-cost route to hollow nanostructured materials using a High Temperature Reducing Jet flame aerosol reactor. The key advantage of this process over traditional flame aerosol synthesis methods is separation of flame chemistry and particle formation, which allows production of hollow nanoshells from an aqueous salt solution without any template or surfactant. We produced amorphous hollow alumina with an average diameter of 181 nm and shell thickness below 10 nm, and demonstrated the generality of the method by also producing hollow SiO 2 , ZrO 2 , Ga 2 O 3 , and Co 2 O 3 . We characterized the morphology, phase transition, thermal stability, and thermal conductivity of the flame-made hollow alumina by electron microscopy, x-ray diffraction, and thermal analysis methods. As a prototypical application, we incorporated hollow alumina into thermal insulation, combining it with common fiberglass insulation to reduce the thermal conductivity by 30% relative to pure fiberglass, to 0.028 W m -1 K -1 while maintaining robust fire-resistance and elasticity.

36 MATERIALS SCIENCE↗

On the low-frequency limit of flame transfer functions

The response of a premixed flame to quasi-steady flow perturbations is considered. It is found that in this low-frequency limit, constraints on the flame transfer function can be established from global conservation laws for mass, energy, and momentum. For example, the transfer function between velocity fluctuations and heat release of a perfectly premixed flame without fluctuations of equivalence ratio should be unity in the limit of zero frequency, while for a combustion system with constant mass flow rate of fuel, the transfer function should tend toward zero. It is demonstrated that these considerations can be employed to reduce the number of unknowns in analytical flame models or identify invalid modeling assumptions. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗