Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fracture Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Return on Investment (ROI) Framework Case Study: CTH.

CTH is a Eulerian code developed at Sandia National Laboratories capable of modeling the hydrodynamic response of explosives, liquids, gases, and solids. The code solves complex multi-dimensional problems characterized by large deformations and strong shocks that are composed of various material configurations. CTH includes models for material strength, fracture, porosity, and high explosive detonation and initiation. The code is an acronym for a complex series of names relating to its origin. A full explanation can be seen in Appendix A. The software breaks penetration simulations into millions of grid-like “cells”. As a modeled projectile impacts and penetrates a target, progressively smaller blocks of cells are placed around the projectile, which show in detail deformations and breakups. Additionally, the code is uniquely suited to modeling blunt impact and blast loading leading to human body injury.

42 ENGINEERING↗

Wide-field probing of silica laser-induced damage precursors by photoluminescence photochemical quenching

Here, we describe a wide-field approach to probe transient changes in photoluminescence (PL) of defects on silica surfaces. This technique allows simultaneous capture of spatially resolved PL with spontaneous quenching behavior. We attribute the quenching of PL intensity to photochemical reactions of surface defects and/or subsurface fractures with ambient molecules. Such quenching curves can be accurately reproduced by our theoretical model using two quenchable defect populations with different reaction rates. The fitting parameters of our model are spatially correlated to fractures in silica where point defects and mechanical stresses are known to be present, potentially indicating regions prone to laser-induced damage growth. We believe that our approach allows rapid spatial resolved identification of damage prone morphology, providing a new pathway to fast, non-destructive predictions of laser-induced damage growth.

47 OTHER INSTRUMENTATION↗

Modeling Dynamic Helium Release as a Tracer of Rock Deformation

Here, we use helium released during mechanical deformation of shales as a signal to explore the effects of deformation and failure on material transport properties. A dynamic dual-permeability model with evolving pore and fracture networks is used to simulate gases released from shale during deformation and failure. Changes in material properties required to reproduce experimentally observed gas signals are explored. We model two different experiments of 4He flow rate measured from shale undergoing mechanical deformation, a core parallel to bedding and a core perpendicular to bedding. We also found that the helium signal is sensitive to fracture development and evolution as well as changes in the matrix transport properties. We constrain the timing and effective fracture aperture, as well as the increase in matrix porosity and permeability. Increases in matrix permeability are required to explain gas flow prior to macroscopic failure, and the short-term gas flow postfailure. Increased matrix porosity is required to match the long-term, postfailure gas flow. This model provides the first quantitative interpretation of helium release as a result of mechanical deformation. The sensitivity of this model to changes in the fracture network, as well as to matrix properties during deformation, indicates that helium release can be used as a quantitative tool to evaluate the state of stress and strain in earth materials.

58 GEOSCIENCES↗

Quantum algorithms for geologic fracture networks

Abstract Solving large systems of equations is a challenge for modeling natural phenomena, such as simulating subsurface flow. To avoid systems that are intractable on current computers, it is often necessary to neglect information at small scales, an approach known as coarse-graining. For many practical applications, such as flow in porous, homogenous materials, coarse-graining offers a sufficiently-accurate approximation of the solution. Unfortunately, fractured systems cannot be accurately coarse-grained, as critical network topology exists at the smallest scales, including topology that can push the network across a percolation threshold. Therefore, new techniques are necessary to accurately model important fracture systems. Quantum algorithms for solving linear systems offer a theoretically-exponential improvement over their classical counterparts, and in this work we introduce two quantum algorithms for fractured flow. The first algorithm, designed for future quantum computers which operate without error, has enormous potential, but we demonstrate that current hardware is too noisy for adequate performance. The second algorithm, designed to be noise resilient, already performs well for problems of small to medium size (order 10–1000 nodes), which we demonstrate experimentally and explain theoretically. We expect further improvements by leveraging quantum error mitigation and preconditioning.

58 GEOSCIENCES↗

Upscaling Reactive Transport and Clogging in Shale Microcracks by Deep Learning

Fracture networks in shales exhibit multiscale features. A rock system may contain a few main fractures and thousands of microcracks, whose length and aperture are orders of magnitude smaller than the former. It is computationally prohibitive to resolve all the fractures explicitly for such multiscale fracture networks. One traditional approach is to model the small-scale features (e.g., microcracks in shales) as an effective medium. Although this fracture-matrix conceptualization significantly reduces the problem complexity, there are classes of physical processes that cannot be accurately upscaled by effective medium approximations, e.g., microcrack clogging during mineral reactions. Here, we employ deep learning in place of effective medium theory to upscale physical processes in small-scale features. Specifically, we consider reactive transport in a fracture-microcrack network where microcracks can be clogged by precipitation. A deep learning multiscale algorithm is developed, in which the microcracks are upscaled as a wall boundary condition of the main fractures. The wall boundary condition is constructed by recurrent neural networks, which take concentration histories as input and predict the solute transport from main fractures to microcracks. The deep learning multiscale algorithm is firstly employed in specific scenarios, then a general model is developed which can work under various conditions. The new approach is validated against fully resolved simulations and an analytical solution, providing a reliable and efficient solution for problems that cannot be upscaled by effective medium models.

58 GEOSCIENCES↗

Modeling rf breakdown arcs

We describe breakdown in 805 MHz rf accelerator cavities in terms of a number of self consistent mechanisms. We divide the breakdown process into three stages: 1) we model surface failure using molecular dynamics of fracture caused by electrostatic tensile stress, 2) we model the ionization of neutrals responsible for plasma initiation and plasma growth using a particle in cell code, and 3) we model surface damage by assuming a process similar to unipolar arcing. We find that the cold, dense plasma in contact with the surface produces very small Debye lengths and very high electric fields over a large area, consistent with unipolar arc behavior, although unipolar arcs are strictly defined with equipotential boundaries. These high fields produce strong erosion mechanisms, primarily self sputtering, compatible with the crater formation that we see. We use OOPIC modeling to estimate very high surface electric fields in the dense plasma and measure these field using electrohydrodynamic arguments to relate the dimensions of surface damage with the applied electric field. We also present a geometrical explanation of the large enhancement factors of field emitters.This is consistent with the apparent absence of whiskers on surfaces exposed to high fields. The enhancement factors we derive, when combined with the Fowler-Nordheim analysis produce a consistent picture of breakdown and field emission from surfaces at local fields of 7 - 10 GV/m. We show that the plasma growth rates we obtain from OOPIC are consistent with growth rates of the cavity shorting currents using x ray measurements. We believe the general picture presented here for rf breakdown arcs should be directly applicable to a larger class of vacuum arcs. Results from the plasma simulation are included as a guide to experimental verification of this model.

43 PARTICLE ACCELERATORS↗

Softening the Gap between Wöhler and Paris – New Approaches for Fatigue Analysis –

Fatigue analysis tools can vary across industries. For example, automotive engineers often use the Wöhler (S-N) approach to design for safe-life, while aerospace engineers prioritize damage tolerance and inspection intervals, relying instead on crack growth models such as Paris’ law. Although both approaches may deal with the control of cracks in similar materials, their analysis tools and material characterizations are fundamentally distinct. This divide mirrors the classic split between stress-based strength analysis and linear elastic fracture mechanics. However, modern nonlinear models that incorporate material softening, such as cohesive laws, blur this boundary and capture fracture behaviors across scales. This presentation describes the CF23 fatigue model, which uses cohesive softening to link S-N crack initiation with crack propagation rates. CF23 spans the full fatigue spectrum, from initial propagation transients to steady-state growth and threshold conditions, offering a unified framework that bridges Wöhler and Paris-based methodologies. Example applications include fatigue crack propagation transients in adhesive interfaces and skin/stiffener separation.

cohesive elements↗

Economic and operational investigation of CO 2 sequestration through enhanced oil recovery in unconventional reservoirs in Colorado, USA

The ongoing CCUS commercial projects are highly relied on the support of government incentives due to massive capital investment. Here, this study analyzes the economics of carbon capture utilization and sequestration (CCUS) projects, shows a state-wide CCUS deployment exercise, followed by simulation results of enhanced oil recovery (EOR) based CO 2 storage in unconventional reservoirs. The comprehensive economic analysis of capture, transportation, sequestration costs, enhanced 45Q tax credits, and EOR revenue implies the practicality of CO 2 -EOR to offset the high CCUS costs. With the economics understanding, we study the top CO 2 sources, existing CO 2 pipelines, and sequestration sinks in the state of Colorado, USA. This paper next presents results from EOR simulation in one section of the unconventional Denver-Julesburg (DJ) Basin Niobrara and Codell reservoirs. The simulation model is based on a geological static model, incorporated with hydraulic fracture stimulation, history matched to production, and calibrated to the microseismic and time-lapse surface seismic data. The CO 2 -EOR simulation results show that oil production can be increased and more CO 2 stored with: a longer primary production period; the presence of a shut-in period; higher injection rates; and multi-well injectors. The modeling results show that about 7–10 Mscf of CO 2 will be stored when recovering 1 stb of EOR oil. By adding the enhanced oil revenue and the carbon credits together, it is estimated that the most economic case can generate $\$13$ MM when oil price is assumed to be $\$80$/stb, and the EOR oil revenue is 3.4 times greater than that generated from 45Q incentives. It corresponds to the scenario that a five-year primary production is followed by CO 2 injection into four wells with the sequence of injection (4 MMscf/day for 6 months), shut-in (6 months) and production (12 months). The best practices in this study will provide valuable insights for similar CCUS projects in other unconventional fields. Furthermore, this study defines a term named “Carbon Neutrality Index (CNI)” by comparing the amount of CO 2 stored with that burned by EOR oil. The CNI value of 0 indicates the enhanced oil is carbon neutral; a negative CNI value implies there is a net reduction in carbon emission. The 4-year huff-n-puff (HnP) simulation leads to a positive CNI value, indicating that the EOR oil generated in this process is not carbon neutral yet.

03 NATURAL GAS↗

Evolution of planar fractures in limestone: The role of flow rate, mineral heterogeneity and local transport processes

In this study, the processes that affect the evolution of fracture geometry and reactive transport in limestone fractures were evaluated using an integrated experimental and modeling approach. Flow-through experiments were performed to investigate the alteration of three artificially made planar limestone fractures, which were exposed to HCl-acidified water flow (pH 3.8 ± 0.1) at three different rates. Reactive infiltration instability developed in the fractures because of small fracture aperture variations and naturally occurring heterogeneity in the rock, i.e., the presence of clay spots of higher porosity. The dissolution regime changed from conical to dominant and ramified wormhole with increasing flow rate, i.e., Péclet number. Maps of fracture aperture obtained from X-ray micro-tomography imaging, together with measurements of permeability and analyses of fluid chemistry, provided experimental constraints for modeling. Numerical simulations were performed using a 2.5D continuum reactive transport model to examine the development of flow patterns and the reactivity and permeability evolution over time, and to interrogate the impacts of fluid reactivity, mineral heterogeneity and diffusive boundary layer. The modeling results showed that fracture alteration is very sensitive to initial fluid reactivity and mineralogical heterogeneity, in addition to flow rate. Finally, the changes of local transport processes during fracture opening also affected the reactivity of the fractured samples.

58 GEOSCIENCES↗

Hybrid Inverse Parameter Identification of Fully Coupled Ductile Damage Model for Steel Sheet DP600 with Two Different Algorithms: Trust Region and Genetic Algorithms

Ductile damage model has been widely regarded as a valuable method to predict the failure of sheet metal. Based on the thermodynamic theory and continuum damage mechanics, the fully coupled ductile damage model can be developed, which also can better predict the initiation and growth of the fracture. But the identifications of model parameters with theoretical methodology are difficult due to the complex coupling relationships existing among all state variables. The inverse methodology is regarded as a good method to resolve the problem. In this paper, the recently proposed fully coupled ductile damage model is chosen to investigate the deformation behavior of DP600 steel, in which the mixed saturation isotropic and kinematic hardenings are taken into account and fully coupled with the ductile damage. During the identification process, the least square formula of the error between experimental and numerical results is selected as the target function. The trust region algorithm and genetic algorithm are used with the help of MATLAB for the identification of three damage parameters. Finally, by comparing the experimental and numerical results, the validations of two algorithms are proved. The efficiency of the optimization process with trust region algorithm is higher, but with lower accuracy. Meanwhile, the optimization process is greatly affected by the chosen initial values of the ductile damage parameters.

36 MATERIALS SCIENCE↗

Radially fractured domes: A comparison of Venus and the Earth

Radially fractured domes are large, tectonic and topographic features discovered on the surface of Venus by the Magellan spacecraft. They are thought to be due to uplift over mantle diapirism, and to date are known to occur only on Venus. Since Venus and the Earth are grossly similar in size, composition and structure, we seek to understand why these features have not been seen on the Earth. We model the uplift and fracturing over a mantle diapir as functions of lithospheric thickness and diapir size and depth. We find that lithospheres of the same thickness on the Earth and Venus should respond similarly to the same sized diapir, and that radially fractured domes should form most readily in thin oceanic lithospheres on Earth if diapiric activity is similar on the two planets. However, our current knowledge of the Earth's oceanic floors is insufficient to confirm or deny the presence of radially fractured domes. We compute the expected dimensions for these features on the Earth and suggest a search for them to determine whether mantle diapirism operates similarly on the Earth and Venus.

Janes, Daniel M.↗

An integrated two-dimensional modeling method for predicting ductility of thin-walled die cast magnesium

In this paper, a two-dimensional (2D) microstructure-based modeling method is developed in order to predict the ductility of a thin-walled high pressure die cast magnesium (Mg) by considering the three-dimensional (3D) thru-thickness pore distributions. For this purpose, a series of 3D synthetic microstructure-based finite element models and the corresponding 2D models are first generated with various pore volume fractions, pore size distributions and pore shapes. The input material properties for the 2D models are determined based on the 3D cubic model with a spherical pore and the generalized Neuber’s rule. Based on the resulting ductility of the 3D and 2D models, a 3D/2D ductility correlation curve is developed as a function of the characteristics/shape of the input fracture strain curve used in the 3D model. The validity of the ductility correlation curve is examined with casting samples with actual microstructures. Here, the results show that the suggested 2D modeling methodology can be used together with the ductility correlation curve in predicting the ductility of thin-walled Mg castings.

36 MATERIALS SCIENCE↗

Experimental Validation of a Module Cell Cracking Model

The What's Cracking app can predict how changes in crystalline silicon photovoltaic (PV) module materials, design, and mounting affect its susceptibility for cell fracture under uniform loading. This work has experimentally validated the app. A set of commercial crystalline silicon PV modules was obtained for this study. The modules were uniformly loaded at three different mounting points, and their subsequent cell fractures were recorded. A large sample size allowed for the development of an experimental statistical model for cell fracture. Here, the comparison of the experiment to predictions from the app is in excellent agreement. Both experimental and modeling results also elucidate how moving the module mounting points toward the center of the module increases the probability of cell fracture.

14 SOLAR ENERGY↗

A smoothed particle hydrodynamics model for droplet and film flow on smooth and rough fracture surfaces

Flow on fracture surfaces has been identified by many authors as an important flow process in unsaturated fractured rock formations. Given the complexity of flow dynamics on such small scales, robust numerical methods have to be employed in order to capture the highly dynamic interfaces and flow intermittency. In this work we present microscale free-surface flow simulations using a three-dimensional multiphase Smoothed Particle Hydrodynamics (SPH) code. Pairwise solid-fluid and fluid-fluid interaction forces are used to control the wetting behavior and cover a wide range of static and transient contact angles as well as Reynolds numbers encountered in droplet flow on rock surfaces. We validate our model via comparison with existing empirical and semi-analyical solutions for droplet flow. We use the model to investigate the occurence of adsorbed trailing films of droplets under various flow conditions and its importance for the flow dynamics when films and droplets coexist. We show that flow velocities are higher on prewetted surfaces covered by a thin film which is qualitatively attributed to the enhanced dynamic wetting and dewetting at the trailing and advancing contact line.

unsaturated flow, fractured rocks, smoothed partic↗

Investigation of wellbore microannulus permeability under stress via experimental wellbore mock-up and finite element modeling

This research aims to describe the microannulus region of the cement sheath-steel casing interface in terms of its compressibility and permeability. Here, a wellbore system mock-up was used for lab-scale testing, and was subjected to confining and casing pressures in a pressure vessel while measuring gas flow along the specimen’s axis. The flow was interpreted as the hydraulic aperture of the microannuli. Numerical joint models were used to calculate stress and displacement conditions of the microannulus region, where the mechanical stiffness and hydraulic aperture were altered in response to the imposed stress state and displacement across the joint interface.

58 GEOSCIENCES↗

Development, Monitoring, and Control of Fracture Thermal Energy Storage (FTES) in Crystalline Rock Formations (DEMO-FTES) (CRADA Final Report)

The DEMO-FTES project sought to demonstrate the thermal efficiency of fracture thermal energy storage (FTES) through numerical simulations, laboratory and meso-scale field tests. A detailed dimensional and scaling analysis was performed to identify key parameters and how they can be most effectively scaled to the laboratory and decameter scale. Numerical models were developed and used for three purposes: 1. Before field experiments, numerical modelling can be used to estimate fracture properties based on previous data from the EGS Collab experiment and then predict thermal hydrological behaviors of the fracture system with hot water injection/withdrawal, therefore, help to design the experiments (e.g., to decide the duration of the cycles based on the flow rate the pump can provide, and the estimated fracture properties); 2. After the field experiment, to estimate the system properties during the experiment (as the size and shape of a fracture could change over time), and understand why system performance is different than what has been predicted, i.e., to help understand the meso-scale test; and, 3. To model the lab experiments and estimate fracture properties and storage efficiency. Ultimately, the experiment and numerical models could shed light on the processes and uncertainty happening during fracture activation and help understand the scaling between lab and field test, and finally, the design and optimization of potential fracture thermal energy storage systems.

25 ENERGY STORAGE↗

Fracture-Based Mesh Size Requirements for Matrix Cracks in Continuum Damage Mechanics Models

This paper evaluates the ability of progressive damage analysis (PDA) finite element (FE) models to predict transverse matrix cracks in unidirectional composites. The results of the analyses are compared to closed-form linear elastic fracture mechanics (LEFM) solutions. Matrix cracks in fiber-reinforced composite materials subjected to mode I and mode II loading are studied using continuum damage mechanics and zero-thickness cohesive zone modeling approaches. The FE models used in this study are built parametrically so as to investigate several model input variables and the limits associated with matching the upper-bound LEFM solutions. Specifically, the sensitivity of the PDA FE model results to changes in strength and element size are investigated.

Leone, Frank A.↗