Search NASA⌕ Search

SEARCH · Search NASA

Results for “Lattice Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Effect of gamma irradiation on dielectric properties of manganese zinc nanoferrites

Naocrystalline ferrites Mn{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (x = 0.00, 0.25, 0.50, 0.75 and 1.00) were prepared by combustion method. The samples were characterized by XRD technique. The dielectric measurements were carried out in the frequency range 40 Hz to 100 MHz at room temperature. All the measurements were performed before and after gamma {sup 60}Co irradiation. The X-ray diffraction patterns revealed the formation of nanocrystalline and single-phase spinel structure. The lattice parameter decrease with zinc ion concentration and increased after the irradiation due to ferric ions of smaller radius converted to ferrous ions of larger radius. The dielectric behavior is attributed to the Maxwell-Wagner type interfacial polarization. The dielctric contant, dielectric loss and AC conductivity enhanced after the irradiation.

36 MATERIALS SCIENCE↗

Stability of the hcp Ruthenium at high pressures from first principles

The method of calculation of the elastic constants up to third order from the energy-strain relation under pressure for the hcp crystals is given and described in details. The method is applied to the hcp phase of Ruthenium. Elastic constants, lattice dynamics, and electronic structure are investigated in the pressure interval of 0–600 GPa by means of first principles calculations. The obtained parameters are in very good agreement with available experimental and theoretical data. No preconditions for phase transformation driven by mechanical or dynamical instabilities for hcp Ru were found in the investigated pressure range. The reason of stability at such high pressures is explained in the context of electronic structure peculiarities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of rapid thermal annealing on the structural and local atomic properties of ZnO: Ge nanocomposite thin films

We have investigated the structural and local atomic properties of Ge nanocrystals (Ge-ncs) embedded ZnO (ZnO: Ge) thin films. The films were deposited by sequential sputtering of ZnO and Ge thin film layers on z-cut quartz substrates followed by an ex-situ rapid thermal annealing (RTA) at 600 °C for 30, 60, and 90 s under forming gas atmosphere. Effects of RTA time on the evolution of Ge-ncs were investigated by x-ray diffraction (XRD), scanning electron microscopy (SEM), hard x-ray photoelectron spectroscopy (HAXPES), and extended x-ray absorption fine structure (EXAFS). XRD patterns have clearly shown that fcc diamond phase Ge-ncs of sizes ranging between 18 and 27 nm are formed upon RTA and no Ge-oxide peak has been detected. However, cross-section SEM images have clearly revealed that after RTA process, Ge layers form varying size nanoclusters composed of Ge-ncs regions. EXAFS performed at the Ge K-edge to probe the local atomic structure of the Ge-ncs has revealed that as prepared ZnO:Ge possesses Ge-oxide but subsequent RTA leads to crystalline Ge structure without the oxide layer. In order to study the occupied electronic structure, HAXPES has been utilized. The peak separation between the Zn 2p and Ge 3d shows no significant change due to RTA. This implies little change in the valence band offset due to RTA.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High temperature XRD of Cu{sub 2}GeSe{sub 3}

The Cu{sub 2}GeSe{sub 3} is prepared by solid state synthesis method. The high temperature XRD has been done at different temperature from 30 °C to 450 °C. The reitveld refinement confirms Cu{sub 2}GeSe{sub 3} phase and orthorhombic crystal structure. The lattice constants are increasing with increase in the temperature and their rate of increase with respect to temperature are used for finding the thermal expansion coefficient. The calculation of the linear and volume coefficient of thermal expansion is done from 30 °C to 400 °C. Decrease in the values of linear expansion coefficients with temperature are observed along a and c axis. Since thermal expansion coefficient is the consequence of the distortion of atoms in the lattice; this can be further used to find the minimum lattice thermal conductivity at given temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Gas sensing behaviour of Cr{sub 2}O{sub 3} and W{sup 6+}: Cr{sub 2}O{sub 3} nanoparticles towards acetone

This paper reports the acetone gas sensing properties of Cr{sub 2}O{sub 3} and 2% W{sup 6+} doped Cr{sub 2}O{sub 3} nanoparticles. The simple cost-effective hydrolysis assisted co-precipitation method was adopted. Synthesized samples were characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) techniques. XRD revealed that synthesized nanoparticles have corundum structure. The lattice parameters have been calculated by Rietveld refinement; and strain and crystallite size have been calculated by using the Williamson-Hall plots. For acetone gas sensing properties, the nanoparticles were applied as thick film onto alumina substrate and tested at different operating temperatures. The results showed that the optimum operating temperature of both the gas sensors is 250°C. At optimum operating temperature, the response of Cr{sub 2}O{sub 3} and 2% W{sup 6+} doped Cr{sub 2}O{sub 3} gas sensor towards 100 ppm acetone was found to be 25.5 and 35.6 respectively. The investigations revealed that the addition of W{sup 6+} as a dopant enhanced the sensing response of Cr{sub 2}O{sub 3} nanoparticles appreciably.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Flake like V{sub 2}O{sub 5} nanoparticles for ethanol sensing at room temperature

The versatile redox property of vanadium oxide explores it in various applications like catalysis, electrochromism, electrochemistry, energy storage, sensors, microelectronics, batteries etc., In this present work, vanadium oxide was prepared via hydrothermal route followed by calcination. The structural and lattice parameters were analysed from the powder X-ray diffraction (XRD) pattern. The morphology and the composition of the sample were obtained from Field emission Scanning electron microscopic (FeSEM) and Energy Dispersive X-ray (EDAX) Spectrometric analysis respectively. The sensitivity, response – recovery time of the sample towards ethanol (0 ppm – 300 ppm) sensing at room temperature was measured and the present investigation on vanadium oxide nanoparticles over the flakes shows better sensitivity (30%) at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of Cu{sub 2}ZnSnS{sub 4} nanoparticles by solvothermal route

CZTS nanoparticles of size ~ 20 nm have been synthesized by solvothermal method. X-ray diffraction pattern confirms the growth of single phase CZTS nanoparticles with kesterite structure and lattice parameter obtained as a = b = 0.54 nm and c = 1.08 nm. The Raman peak observed at 338 cm{sup −1} also confirms the formation of pure CZTS phase. High resolution transition electron microscopy image confirms the good crystallinity of the CZTS nanoparticles with the growth along (112) plane. Energy dispersive spectroscopy confirms the stoichiometry of the CZTS nanoparticles. The CZTS nanoparticles exhibits a strong optical absorption in the visible region with direct band gap ~1.5 eV, which is optimum for photovoltaic application.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Coupled macrospins: Mode dynamics in symmetric and asymmetric vertices

We report the microwave response of symmetric and asymmetric threefold clusters with nearly contacting segments that can serve as the node in a Kagome artificial spin ice lattice. The structures are patterned on a coplanar waveguide and consist of elongated and nearly-contacting ellipses with uniform thickness. Branches of the ferromagnetic resonance spectra display mode softening that correlates well with the calculations, whereas agreement between the measured and simulated static magnetization is more qualitative.

36 MATERIALS SCIENCE↗

First-principles study of bandgap bowing in BGaN alloys

III-nitride alloys continue to drive advances in electronic and optoelectronic devices. Recently, boron-containing nitride alloys have been explored with the goal of expanding the range of applications. Using first-principles calculations with a hybrid functional, we study the electronic structure of wurtzite BGaN alloys. Strong bandgap bowing is observed, with a concentration-dependent bowing parameter. Due to the strong bandgap bowing, the fundamental bandgap in strain-free alloys is effectively unchanged for the lowest B concentrations. A crossover from a direct to an indirect bandgap occurs for B concentrations greater than 50%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The effects of Co 3 O 4 on the structure and unusual magnetism of LaCoO 3

In this work, bulk La w CoO 3 particles with w = 1.1, 1.0, 0.9, 0.8, and 0.7 were synthesized using starting materials with varying molar ratios of La 2 O 3 and Co 3 O 4 . The resulting particles are characterized as LaCoO3 crystals interfaced with a crystalline Co 3 O 4 phase. X-ray and neutron scattering data show little effect on the average structure and lattice parameters of the LaCoO 3 phase resulting from the Co 3 O 4 content, but magnetization data indicate that the amount of Co3O4 strongly affects the ferromagnetic ordering at the interfaces below $T_C$ ≈ 89 K. In addition to ferromagnetic long-range order, LaCoO 3 exhibits antiferromagnetic behavior with an unusual temperature dependence. The magnetization for fields 20 Oe ≤ H ≤ 5 kOe is fit to a combination of a power law $((T – T_C)/T_C)^β$ behavior representing the ferromagnetic long-range order and sigmoid-convoluted Curie–Weiss-like behavior representing the antiferromagnetic behavior. The critical exponent $\textit{β}$ = 0.63 ± 0.02 is consistent with 2D (surface) ordering. Increased Co 3 O 4 correlates well to increased ferromagnetism. The weakening of the antiferromagnetism below $\textit{T}$ ≈ 40 K is a consequence of the lattice reaching a critical rhombahedral distortion as $\textit{T}$ is decreased for core regions far from the Co 3 O 4 interfaces. We introduce a model that describes the ferromagnetic behavior of the interface regions and the unusual antiferromagnetism of the core regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fidelity threshold for long-range entanglement in quantum networks

We present a strategy to generate long-range entanglement in noisy quantum networks. We consider a cubic lattice whose bonds are partially entangled mixed states of two qubits, and where quantum operations can be applied perfectly at the nodes. In contrast to protocols designed for one- or two-dimensional regular lattices, we find that entanglement can be created between arbitrarily distant qubits if the fidelity of the bonds is higher than a critical value, independent of the system size. Therefore, we show that a constant overhead of local resources, together with connections of finite fidelity, is sufficient to achieve long-distance quantum communication in noisy networks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatiotemporal vortex solitons in hexagonal arrays of waveguides

By means of a systematic numerical analysis, we demonstrate that hexagonal lattices of parallel linearly coupled waveguides, with the intrinsic cubic self-focusing nonlinearity, give rise to three species of stable semidiscrete complexes (which are continuous in the longitudinal direction) with embedded vorticity S: triangular modes with S=1, hexagonal ones with S=2, both centered around an empty central core, and compact triangles with S=1, which do not not include the empty site. Collisions between stable triangular vortices are studied too. These waveguiding lattices can be realized in optics and Bose-Einstein condensate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Radiative capture rates at deep defects from electronic structure calculations

We present a methodology to calculate radiative carrier capture coefficients at deep defects in semiconductors and insulators from first principles. Electronic structure and lattice relaxations are accurately described with hybrid density functional theory. Calculations of capture coefficients provide an additional validation of the accuracy of these functionals in dealing with localized defect states. We also discuss the validity of the Condon approximation, showing that even in the event of large lattice relaxations the approximation is accurate. We test the method on GaAs:VGa-TeAs and GaN:CN, for which reliable experiments are available, and demonstrate very good agreement with measured capture coefficients.

36 MATERIALS SCIENCE↗

Sparse expansions of multicomponent oxide configuration energy using coherency and redundancy

We report that compressed sensing has become a widely accepted paradigm to construct high dimensional cluster expansion models used for statistical mechanical studies of atomic configuration in complex multicomponent crystalline materials. However, strict sampling requirements necessary to obtain minimal coherence measurements for compressed sensing to guarantee accurate estimation of model parameters are difficult and in some cases impossible to satisfy due to the inability of physical systems to access certain configurations. Nevertheless, the dependence of energy on atomic configuration can still be adequately learned without these strict requirements by using compressed sensing by way of coherent measurements using redundant function sets known as frames. We develop a particular frame constructed from the union of all occupancy-based cluster expansion basis sets. We illustrate how using this highly redundant frame yields sparse expansions of the configuration energy of complex oxide materials that are competitive and often surpass the prediction accuracy and sparsity of models obtained from standard cluster expansions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computation of forces and stresses in solids: Towards accurate structural optimization with auxiliary-field quantum Monte Carlo

The accurate computation of forces and other energy derivatives has been a long-standing challenge for quantum Monte Carlo methods. A number of technical obstacles contribute to this challenge. We discuss how these obstacles can be removed with the auxiliary-field quantum Monte Carlo (AFQMC) approach. AFQMC is a general, high-accuracy, many-body total-energy method for molecules and solids. The implementation of back-propagation for pure estimators allows direct calculation of gradients of the energy via the Hellmann-Feynman theorem. A planewave basis with norm-conserving pseudopotentials is used for the study of periodic bulk materials. Completeness of the planewave basis minimizes the effect of so-called Pulay terms. The ionic pseudopotentials, which can be incorporated in AFQMC in exactly the same manner as in standard independent-electron methods, regulate the force and stress estimators and eliminate any potential divergence of the Monte Carlo variances. The resulting approach allows applications of full geometry optimizations in bulk materials. As a result, it also paves the way for many-body computations of the phonon spectrum in solids.

36 MATERIALS SCIENCE↗

Structural evolution of iodine on approach to the monatomic state

Here, we applied single-crystal x-ray diffraction and Raman spectroscopy in a diamond-anvil cell up to 36 GPa and first-principles theoretical calculations to study the molecular dissociation of solid iodine at high pressure. Unlike previously reported, we find that the familiar Cmce molecular phase transforms to a Cmc2 1 molecular structure at 16 GPa, and then to an incommensurate polymeric Fmmm⁡(00⁢$\gamma$)⁢s⁢00 structure, which can be viewed as a mixture of molecular I 2 and zigzag chains of three iodine atoms, at 20 GPa. The available data are consistent with metallization of iodine at the boundary between the commensurate Cmc⁢2 1 structure and the incommensurate Fmmm⁡(00⁢$\gamma$)s⁢00 structure at 20 GPa.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calorimetric study of carbon partitioning from martensite into austenite steel

Quenching and partitioning (Q and P) has been developed as a novel steel heat treatment to produce advanced high-strength microstructures consisting of a martensitic matrix containing significant amounts of retained austenite. Austenite stabilization is hypothesized to result from decarburization of the martensite and transport into the austenite. Differential scanning calorimetry was employed to study Q and P microstructures. Two exothermic events were observed when heating a Q and P sample from room temperature to 600 deg. C. An activation energy suggesting a mechanism controlled by carbon diffusion in bcc iron is obtained for the first peak which is believed to be associated with carbon partitioning. The second peak is believed to be associated with austenite decomposition.

36 MATERIALS SCIENCE↗