Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Multi-scale investigation on mechanical behavior and microstructural alteration of C-S-H in carbonated Alite paste

Carbonation treatment is a promising option to enhance recycled concrete aggregate (RCA) quality and eventually improve concrete performance. This study investigated the multi-scale mechanical properties of calcium silicate hydrates (C-S-H) in a mature alite paste subjected to accelerated carbonation treatment by testing macro compressive strength, microhardness and nanoindentation. The results show that, carbonation treatment resulted in a heterogeneous distribution of carbonation products in the alite sample. Reinforcement of C-S-H by the randomly precipitated calcite and vaterite crystals prevailed over the nano-structural and compositional alteration of C-S-H induced by carbonation, leading to an increase of nano-indentation modulus at the edge of the sample. Also, the microhardness at the edge zone was markedly higher than that at the core of the carbonated sample. The carbonated peripheral zone with improved nano-scale modulus and microhardness was likely serving as a “hard shell”, contributing to the improved macro compressive strength. The new insights into the multi-scale mechanical properties of carbonated C-S-H contribute to further understanding of the enhanced properties of RCA after carbonation treatment.

36 MATERIALS SCIENCE↗

A two-set order parameters phase-field modeling of crack deflection/penetration in a heterogeneous microstructure

Modeling of crack deflection/penetration or manifested as intergranular/transgranular fracture in polycrystals has long been a challenge in both fracture mechanics and materials science. A phase-field model formulated with two-set order parameters describing the crack field and the microstructure field respectively, is herein established to investigate the competition between crack penetration and deflection at an interface. The advantages of the proposed model are three-fold: (1) the fracture toughness of grain boundaries and/or interfaces, besides single crystal properties (e.g., Young’s modulus, Poisson ratio, and fracture toughness), can be automatically incorporated, (2) cohesive interfaces are treated in one phase-field framework in comparison with the integrated phase-field and cohesive zone model in which cohesive elements have to be manually placed at the interface, and (3) two-set order parameters enable to describe the concurrent crack propagation and microstructure evolution. The proposed model is validated by comparing the simulated critical deflection angles with the results from theoretical analysis of the linear elastic fracture mechanics and the experiments. The model is then applied to a heterogeneous Silicon Nitride polycrystal to determine the effect of interface fracture toughness on the intergranular/transgranular fracture transition and the effective toughness of the materials.

Chen, Hu↗

A microstructure-guided constitutive modeling approach for random heterogeneous materials: Application to structural binders

This paper presents a microstructure-guided modeling approach to predict the effective elastic response of heterogeneous materials, and demonstrates its application toward two highly heterogeneous, uncon- ventional structural binders, i.e., iron carbonate and fly ash geopolymer. Microstructural information from synchrotron X-ray tomography (XRT) and intrinsic elastic properties of component solid phases from statistical nanoindentation are used as the primary inputs. The virtual periodic 3D microstructure reconstructed using XRT, along with periodic boundary conditions is used as a basis for strain- controlled numerical simulation scheme in the linear elastic range to predict the elastic modulus as well as the stresses in the microstructural phases. The elastic modulus of the composite material predicted from the microstructure-based constitutive modeling approach correlates very well with experimental measurements for both the materials considered. This technique efficiently links the microstructure to mechanical properties of interest and helps develop material design guidelines for novel heterogeneous composites

36 MATERIALS SCIENCE↗

Molecular scale insight of pore morphology relation with mechanical properties of amorphous silica using ReaxFF

Porous materials are typically heterogeneous and they contain large variations of micro-/nano-pore structures, causing complicated behaviors. In continuum models, most mechanical properties of porous materials are estimated based on porosity, while the variations of micro/nano structures are ignored. That could be problematic as the microscopic heterogeneity may affect the mechanical response of porous materials. Thus, understanding micro/nano heterogeneity impact has been the focus in many scientific and engineering subjects. In the present study, we investigated the effect of nanopore structure (including pore shape and orientation) as well as porosity on mechanical properties of amorphous silica (a-SiO 2 ). The pore sizes in our simulations are comparable to the corresponding ones observed in a-SiO 2 based materials. We found that the existing of nanopores strongly influences Young’s modulus (E) and critical energy release rate (G IC ). These properties decrease with increasing porosity. Importantly, the impact of nanopores was characterized by structural parameters of porous materials. In addition to dependency on porosity, Young’s modulus also was found to vary as a function of potential energy per atom, which highly depends on nanopore shape. Furthermore, critical energy release rate was found to increase with increasing ligament length (also known as pore wall thickness). Finally, the results highlighted the importance of nanopore structures, which must be taken into account when studying fracture mechanisms in porous materials. Based on our findings, it was proposed that mechanical properties of porous materials can be controlled by nano-engineering pore structures.

36 MATERIALS SCIENCE↗

Effect of plasma treatment on LMPAEK/CF tape and composites manufactured by automated tape placement (ATP)

Automated tape placement (ATP) process is widely used in aerospace for its advanced process control and multi-axis capabilities but faces issues like limited choice of materials and suboptimal tape consolidation. This study investigates air plasma treatment on ATP carbon fiber thermoplastic feedstock tape to address these challenges. The effects on low melt Polyaryletherketone/carbon fiber unidirectional tape (LMPAEK/CF UD tape) were analyzed. Treated and untreated tapes were used to fabricate composites and evaluated for physical, thermal, mechanical, and interfacial properties. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) analyses revealed surface roughness changes (on LMPAEK), extent of oxidation, and the presence of hydroxyl/carboxyl groups. Composites from plasma-treated tapes showed a 7.6% increase in tensile strength, 8% in tensile modulus, 18% in flexural strength, and 8.3% in flexural modulus. Further, the interlaminar shear strength improved by 18.7%. Failure analysis showed untreated composites failed via inter-ply and fiber-matrix delamination, while treated composites experienced matrix cracking and fiber breakage. This study highlights atmospheric plasma treatment as a solution to ATP’s limitations, significantly enhancing LMPAEK/CF UD tape composites’ properties.

36 MATERIALS SCIENCE↗

Polyacrylonitrile nanocomposite fibers from acrylonitrile-grafted carbon nanofibers

For the first time, uniform distribution of surface functionalized carbon nanofibers (CNFs) has been achieved in low molecular weight (≈120,000 g/mol) textile grade-polyacrylonitrile (PAN)-based composite filaments. Furthermore, surface grafting of CNFs with acrylonitrile enhances the dispersion of nanofibers in PAN fiber matrix. XPS study reveals high atomic nitrogen content (7%) on the CNF surface due to the grafting reaction. The solution-spun filaments have been characterized for distribution of CNFs in the PAN matrix by electron microscopy. PAN composite filaments containing 3.2 wt.% CNF and processed at draw ratio of ≈6.3 exhibit enhanced tensile strength and modulus by more than three folds compared to the control PAN filament. Because of chemically compatible surface modification of the nanofibers, better dispersion and improved mechanical properties were accomplished in the reinforced PAN fibers. This should then allow the production of CNF reinforced carbon fibers with improved tensile properties. An increase in CNF loading (6.4 wt.%), however, reduced performance due to inefficient alignment of CNF along the fiber axis. Nevertheless, hot stretching (at draw ratio ≈ 10) of the filaments enhanced tensile strength and elastic modulus of PAN composite filaments by 20–30% compared to the control hot stretched PAN filaments.

36 MATERIALS SCIENCE↗

Bio-treatment of poplar via amino acid for interface control in biocomposites

Advanced biocomposites reinforced by abundant biomass-derived fillers can add a revenue stream to enhance the economic viability of biofuel production chains and the energy efficiency of the composite industry. However, the low stiffness of biopolymers limits their use in structural applications. Poplar fibers (mesh size: <180 μm, Populus spp.), an abundant waste from the wood industry, were used as bio-filler to fabricate high-performance biocomposites based on polylactic acid (PLA), in which the poplar fibers were modified by an amino acid (l-lysine). As a benefit of the amino acid treatment, the tensile Young's moduli of the lysine/poplar/PLA composites increased by up to 68% with the addition of a small amount of lysine, compared with neat PLA. At the same time, the tensile strength, failure strain, and Young's modulus of the poplar/PLA composites all increased after adding only 0.1 wt % of lysine. It has been observed that the lysine content has a significant effect on the decomposition temperature, complex viscosity, storage modulus, crystallization temperature, and crystallinity of composites. The fracture surfaces of the composites with an optimum lysine content had fewer voids and were more compact compared with composites without any lysine. The pores on the surfaces of poplar fibers became more available for the penetration of PLA molecules as a result of lysine addition. Finally, this study presents a facile method for reinforcing biocomposites with extremely low-cost and environmentally friendly biofillers.

59 BASIC BIOLOGICAL SCIENCES↗

Core-shell structured tow-pregs enabled additive manufacturing of continuously reinforced thermoset composites

One of the major challenges in thermally curable polymer composite additive manufacturing is the slow curing time of thermally curable resins, coupled with a significant drop in thermoset viscosity upon heating, making the formation of complex shapes difficult. To tackle these issues, we have introduced a novel rapid composite preformation strategy called Tow-Preg Cladding (TPC). This technique involves the use of a thin and rapidly curable dual-cure resin, which combines a thermally curable resin (such as epoxy) with a fast photo-curable resin. The dual-cure resin is applied as a coating over a thermally curable resin tow-preg, enabling the formation of a rigid cladding that supports and shapes the tow-pregs into the desired geometries and patterns. The key advantage of this approach lies in the sequential formation of an interpenetrating polymer network (IPN) at the interlayer between laminates, resulting from the curing of the photocurable resin and the thermally curable resin sequentially. This IPN formation enhances interlaminar bonding in the composite, contributing to its overall strength and performance. The composites produced using this technique exhibited impressive mechanical properties, including longitudinal tensile strength of 1058.2 MPa, longitudinal tensile modulus of 74.2 GPa, flexural strength of 1080.4 MPa, and flexural modulus of 41.7 GPa. Overall, our Tow-Preg Cladding approach shows great promise in overcoming the challenges associated with thermally curable polymer composite additive manufacturing. It offers a viable solution to creating strong, shape-specific thermoset composites efficiently with enhanced mechanical properties.

42 ENGINEERING↗

Recycling of CF-ABS machining waste for large format additive manufacturing

Large format additive manufacturing (LFAM) necessitates the use of short fiber thermoplastic composites, such as carbon fiber filled acrylonitrile butadiene styrene, to enable printing. Currently, when LFAM parts are machined into their final shape, the machining scrap (i.e., small flake like particles and offcuts) is landfilled. Previous studies have demonstrated the viability of recycling end-of-life LFAM parts by shredding and optionally re-compounding the material back into pellets. However, there is little understanding of the value and performance of recycled material made from LFAM machining scrap, which if pursued could motivate more broad recycling of this waste stream. In this study, recycled in-process machining scrap is explored as an LFAM feedstock source. Herein, it is found that the primary degradation mechanism of the recycled material is significant fiber length attrition during surface machining. While this fiber attrition negatively impacts the mechanical performance of the material in the print direction, it seems that the changes in processing behaviors and print quality, namely the surface roughness of the printed structure associated with shorter fiber lengths, is beneficial to interlayer adhesion. The tensile strength and elastic modulus of the recycled material, in the print direction, decreased 11% and 31% respectively compared to the pristine material. However, in the layer-wise direction it was found that the recycled material exhibited no significant change in elastic modulus and a significant 21% increase in tensile strength – a surprising result. In conclusion, this work indicates that machining waste could be a viable material stream for recycled LFAM feedstock materials.

42 ENGINEERING↗

Supersonic hot jet ablative testing and analysis of boron nitride nanotube hybrid composites

Boron nitride nanotubes (BNNTs) are high-strength, high-modulus nanotubes with high thermal and oxidative stabilities. Two hybrid composites were prepared with satin weave carbon fiber (CF) and resole-type phenolic resin: one with surface layers of BNNTs and one with alternating interlayers of BNNTs. The samples were subjected to hot jet tests that simulate realistic high-pressure-temperature conditions to understand the behavior of BNNTs under high-pressure erosion. Adding BNNTs to CF/phenolic laminates enhanced the ablation resistance by reinforcing the char material and mitigated localized thermal damage. Hybrid laminates exhibited up to 14% lower weight loss, 55% increase in flexural modulus, higher thermal diffusivity, and improved char yield and microstructure compared to CF/phenolic samples. The surface layer hybrid had many surviving nanotubes reinforcing the char and crystalline oxide structures that could mitigate further oxygen diffusion. Further, various characterization methods were used to deduce possible mechanisms and their products, indicating that BNNTs could serve as growth templates for direct crystalline boron oxide formation. Overall, hybrid BNNT/CF/phenolic laminates displayed better ablation resistance and favorable microstructure evolution under high-pressure conditions.

42 ENGINEERING↗

Highly oriented carbon fiber–polymer composites via additive manufacturing

Additive manufacturing, diverging from traditional manufacturing techniques, such as casting and machining materials, can handle complex shapes with great design flexibility without the typical waste. Although this technique has been mainly used for rapid prototyping, interest is growing in using this method to directly manufacture actual parts of complex shape. To use 3D-printing additive manufacturing in wide spread applications, the technique and the feedstock materials require improvements to meet the mechanical requirements of load-bearing components. Thus, we investigated the short fiber (0.2 mm to 0.4 mm) reinforced acrylonitrile-butadiene-styrene composites as a feedstock for 3D-printing in terms of their processibility, microstructure and mechanical performance; and also provided comparison with traditional compression molded composites. The tensile strength and modulus of 3D-printed samples increased ~115% and ~700%, respectively. 3D-printer yielded samples with very high fiber orientation in printing direction (up to 91.5 %), whereas, compression molding process yielded samples with significantly less fiber orientation. Microstructure-mechanical property relationships revealed that although the relatively high porosity is observed in the 3D-printed composites as compared to those produced by the conventional compression molding technique, they both exhibited comparable tensile strength and modulus. Furthermore, this phenomena is explained based on the changes in fiber orientation, dispersion and void formation.

36 MATERIALS SCIENCE↗

In-situ X-ray scattering study of isotactic polypropylene/graphene nanocomposites under shear during fused deposition modeling 3D printing

Complementary techniques were applied to characterize the structure property relationships of FDM printed isotactic polypropylene/graphene nanocomposites. Raman spectroscopy indicated that graphene was mostly exfoliated during the nozzle extrusion process. Rheological measurements of the viscosity indicated that the presence of graphene induced shear thinning during extrusion. Azimuthal scans of wide angle x-ray scattering indicate correlated thermal fluctuations of the graphene platelets which stops abruptly at the onset of transcrystallization, or templating of the iPP chains on the graphene. X-ray microbeam SAXS analysis show the formation of ‘shish-kebab’ structures at the core of the unfilled filaments, where the ‘kebab’ component vanishes at the fiber-fiber interface enabling interdiffusion. Weak lamellar structure, and a corresponding decrease in the storage modulus are observed with the addition of 5% graphene. The lamellar structure disappears entirely with the addition of 10% graphene, while the storage modulus is decreased by nearly 50%. Thermal imaging of heat flux dissipation across molded and printed samples shows no orientational effects in pure iPP despite differences in crystal structure. Thermal conductivity increases dramatically in the samples with 10% graphene, and strong orientational effects are observed where the thermal coefficients differ by 180% between samples printed parallel or perpendicular to the heat flux.

36 MATERIALS SCIENCE↗

Structure-property relationship between lignin structures and properties of 3D-printed lignin composites

Lignin is a low-cost and renewable bioresource with a huge annual production promising to prepare sustainable materials. However, the poor interfacial adhesion between many lignin-polymer pairs deteriorates the mechanical performance of the composites, which seriously limits the application of lignin in 3D printing via fused depositional modeling. This work examined lignin-polyamide 12 (PA 12) intermolecular interactions (e.g., hydrogen bonding) to address the interface challenge. To realize this goal, the phenolic hydroxyl content was increased for a kraft softwood lignin using a LiBr/HBr demethylation procedure, increasing phenoxy content by 61.7%. Increased hydrogen bonding interactions between modified lignin (Pine-Lig-OH) and PA 12 demonstrated a significantly improved molten dynamic modulus by rheological analysis. Regarding mechanical properties, by adding 20 wt% of Pine-Lig-OH, the tensile strength and Young's modulus reached 46.6 MPa and 1.62 GPa, 30.2% and 33.9% higher than PA 12, respectively. Further morphological analysis proved the interfacial interactions are enhanced by showing the difference in the phase gaps. The dynamic mechanical analysis (DMA) supported the conclusion that Pine-Lig-OH could interact with polymer chains, alternating segmental movements due to the strong interaction. Here, this study presents a method to enhance lignin composite properties by promoting interactions with the polymer matrix through modified functional groups, guiding future lignin composite research.

36 MATERIALS SCIENCE↗

Experimental and computational analysis of bending fatigue failure in chopped carbon fiber chip reinforced composites

With a better balance among good mechanical performance, high freedom of design, and low material and manufacturing cost, chopped carbon fiber chip reinforced sheet molding compound (SMC) composites show great potential in different engineering applications. Here in this paper, bending fatigue behaviors of SMC composites considering the heterogeneous fiber orientation distributions have been thoroughly investigated utilizing both experimental and computational methods. First, four-point bending fatigue tests are performed with designed SMC composites, and the local modulus is adopted as a metric to represent the local fiber orientation of two opposing sides. Interestingly, SMC composites with and without large discrepancy in local modulus of opposing sides show different fatigue behaviors. Interrupted tests are conducted to explore the bending fatigue failure mechanism, and the damage processes of valid specimens are also closely examined. We find that the fatigue failure of SMC composites under four-point bending is governed by crack propagation instead of crack initiation. Because of this, the heterogeneous local fiber orientations of both sides of the specimen influence fatigue life. The microstructure of the lower side shows a direct influence while that of the upper side also exhibiting influence which becomes more prominent for high cycle fatigue cases. Furthermore, a hybrid micro–macro computational model is proposed to efficiently study the cyclic bending behavior of SMC composites. The region of interest is reconstructed with a modified random sequential absorption algorithm to conserve all the microstructural details including the heterogeneous fiber orientation, while the rest of the regions are modeled as homogenized macro-scale continua. Combined with a framework to capture the progressive fatigue damage under cyclic bending, the bending fatigue behaviors of SMC composites are accurately captured by the hybrid computational model comparing with our experimental analysis.

36 MATERIALS SCIENCE↗

Sensitivity of the strength and toughness of concrete to the properties of the interfacial transition zone

We report Civil infrastructure is made primarily of concrete structures or components and therefore understanding durability and fracture behavior of concrete is of utmost importance. Concrete contains an interfacial transition zone (ITZ), a porous region surrounding the aggregates, that is often considered to be the weakest region in the concrete. The ITZ is poorly characterized and property estimates for the ITZ differ considerably. In this simulation study, representative concrete mesostructures are produced by packing coarse aggregates with realistic geometries into a mortar matrix. A meshless numerical method, peridynamics, is utilized to simulate the mechanical response including fracture under uniaxial compression and tension. The sensitivity of the stiffness and fracture toughness of the samples to the ITZ properties is computed, showing strong relationships between the ITZ properties and the effective modulus and effective yield strength of the concrete. These results provides insight into the influence of the poorly characterized ITZ on the stiffness and strength of concrete. This work showcases the applicability of peridynamics to concrete systems, matching experimental strength and modulus values. Additionally, relationships between the ITZ’s mechanical properties and the overall concrete strength and stiffness are presented to enable future design decisions.

36 MATERIALS SCIENCE↗

ElasTool v3.0: Efficient computational and visualization toolkit for elastic and mechanical properties of materials

Efficient computation and visualization of elastic and mechanical properties are crucial in the selection of materials and the design of new materials. Here, the ElasTool v3.0 toolkit marks a significant advancement in the computational analysis and visualization of elastic and mechanical properties of materials, essential in material selection and design. This enhanced version extends beyond standard calculations like elastic tensor, Young's modulus, bulk modulus, and Poisson's ratio. It introduces capabilities for computing minimum thermal conductivity, linear compressibility, rendering the Christoffel equation, and elastic energy density. Notably, it integrates advanced visualization tools, including compatibility with Plotly and Elate web platforms for interactive web-based property exploration. A key feature of ElasTool v3.0 is the implementation of second-order elastic constants (SOECs) for tubular 2D-based nanostructures and nanotubes. Leveraging high-efficiency strain-matrix sets (OHESS), the toolkit now facilitates efficient computation of elastic constants and mechanical properties at both zero and finite temperatures for 1D, 2D, and 3D dimensions. ElasTool is openly accessible on GitHub: https://github.com/gmp007/elastool.

1D, 2D, 3D, and tubular 2D nanostructure and nanot↗

Effect of strain rate on the deformation of hollow CoS nanoboxes and doubly porous self-assembled films

Nanomaterials with multiscale porosity are attractive as lightweight structural materials because unique deformation mechanisms can be programmed at different length scales. Here, we explore this concept by investigating the mechanics of hollow nanoboxes, as well as films self-assembled from nanoboxes. Hollow CoS nanoboxes with lengths of 900 nm and <30 nm wall thickness are synthesized using colloidal methods. Individual nanoboxes are compressed inside a scanning electron microscope at strain rates of 0.001 s –1 , 0.01 s –1 , and 0.1 s –1 . Nanoboxes are found to have a first peak stress of 15 MPa and loading modulus of ~240 MPa regardless of strain rate. The nanoboxes deform through ductile, plastic bending of side walls at 0.001 s –1 strain rate, while brittle fracture occurs at the higher strain rates. Self-assembly of these nanoboxes results in films with relative density of <0.1. Nanoindentation shows strain rate independent behavior with average modulus and hardness of ~15 MPa and ~230 kPa, respectively. Furthermore, the mechanical behavior of the film is compared to that of the nanobox building blocks, cellular foams and granular materials.

36 MATERIALS SCIENCE↗

Velocity Crossover Between Hydrous and Anhydrous Forsterite at High Pressures

The elastic properties of hydrous forsterite, Mg{sub 2-x}SiO{sub 4}H{sub 2x}, are relevant to interpreting seismic velocity anomalies in the Earth's mantle. In this study, we used Brillouin scattering to determine the single-crystal elasticity of forsterite with 0.9(1) wt.% H{sub 2}O (x = 0.14) to 14 GPa. Aggregate bulk and shear moduli of hydrous forsterite increase with pressure at a greater rate than those of the corresponding anhydrous phase. Compared with anhydrous forsterite, we observe a 7% increase in the pressure derivative of the bulk modulus (K{prime}{sub S0} = 4.50(5)), and a 25% increase in the pressure derivative of the shear modulus (G{prime}{sub 0} = 1.75(5)) for forsterite with near maximum possible water content. Using our results, we calculated the compressional, V{sub P}, and shear, V{sub S}, velocities of forsterite as a function of pressure at 300 K. Whereas V{sub P} and V{sub S} of hydrous forsterite are 0.6% and 0.4% slower than those of anhydrous forsterite at ambient pressure, velocity crossovers at {approx} 3-4 GPa result in higher hydrous forsterite velocities at pressures corresponding to depths below {approx} 120 km. At the pressure of the 410-km discontinuity, V{sub P} and V{sub S} of hydrous forsterite exceed those of anhydrous forsterite by 1.1(1)% and 1.9(1)%, respectively. This implies that incorporation of water could decrease the magnitude of the velocity contrast at 410-km depth between forsterite and wadsleyite. Although the effects of hydration on temperature derivatives of the elastic moduli of forsterite and wadsleyite are not yet known, from the current data we estimate that the presence of {approx} 0.4 wt.% H{sub 2}O in forsterite (at 60 mol%) could lower the P and S velocity contrast at 410-km depth to 3.8(4)% and 4.8(6)%, respectively. At high pressures, hydration also decreases the V{sub P}/V{sub S} ratio of forsterite, and lowers the maximum P wave azimuthal anisotropy and S wave splitting of forsterite.

79 ASTRONOMY AND ASTROPHYSICS↗