Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

A low phase noise microwave source for atomic spin squeezing experiments in {sup 87}Rb

We describe and characterize a simple, low cost, low phase noise microwave source that operates near 6.800 GHz for agile, coherent manipulation of ensembles of {sup 87}Rb. Low phase noise is achieved by directly multiplying a low phase noise 100 MHz crystal to 6.8 GHz using a nonlinear transmission line and filtering the output with custom band-pass filters. The fixed frequency signal is single sideband modulated with a direct digital synthesis frequency source to provide the desired phase, amplitude, and frequency control. Before modulation, the source has a single sideband phase noise near -140 dBc/Hz in the range of 10 kHz-1 MHz offset from the carrier frequency and -130 dBc/Hz after modulation. The resulting source is estimated to contribute added spin-noise variance 16 dB below the quantum projection noise level during quantum nondemolition measurements of the clock transition in an ensemble 7 x 10{sup 5} {sup 87}Rb atoms.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Synthesis and characterization of mixed phases in the Ca–Co–O system using the Pechini method

Highlights: ► We have prepared mixed Ca–Co–O phases using the Pechini method. ► Reaction times are reduced relative to conventional solid-state synthesis. ► Products have high surface area suitable for ceramic processing. ► Product composition is dictated by both kinetic and thermodynamic control. ► A revised phase diagram of the Ca–Co–O system is proposed. - Abstract: The synthesis of mixed phases in the Ca–Co–O system using the Pechini method was investigated. The phases CaCo{sub 2}O{sub 4}, Ca{sub 3}Co{sub 4}O{sub 9} and Ca{sub 3}Co{sub 2}O{sub 6}, which can be expressed in terms of the molar ratios of the binary oxides (CaO:Co{sub 2}O{sub 3}) as (1:1), (3:2) and (3:1) respectively, were obtained in pure form. Powder X-ray diffraction data showed they are comparable with materials obtained by conventional solid-state synthesis. The mild synthesis conditions of the Pechini method allowed the evolution of the Ca–Co–O phases to be studied as a function of temperature and heating time. Both variables have a strong influence on the composition of the products, indicating that both kinetic and thermodynamic factors play a role, with the former being of more importance at lower temperatures. The (1:1) phase, previously not identified in the phase diagram of the Ca–Co–O system, was obtained preferentially across the composition range below ca. 650 °C. The (3:2) phase was preferred until ca. 800 °C. At even higher temperatures, the (3:1) phase is obtained. The upper thermal stability limit of mixed phases in the Ca–Co–O system increases with the Ca:Co ratio. An updated phase diagram for the Ca–Co–O system is proposed.

36 MATERIALS SCIENCE↗

Mechanical properties of an Al 10 Nb 20 Ta 15 Ti 30 V 5 Zr 20 A2/B2 refractory superalloy and its constituent phases

Refractory superalloys (RSAs) are a new class of high-temperature structural materials consisting of a nanometer-sized mixture of two coherent A2 (disordered BCC) and B2 (ordered) phases. While these RSAs typically exhibit superior mechanical properties at elevated temperatures, they suffer from limited plasticity at lower temperatures, often attributed to the continuous ordered B2 matrix in these two-phase alloys. To knowledgably control the microstructure and mechanical properties of these alloys, the properties of the constitutive phases in RSAs should be known. Currently this information is absent. Here, in the present work, the microstructure and mechanical properties (at 20–1200 °C) of a candidate Al 0.5 NbTa 0.8 Ti 1.5 V 0.2 Zr RSA and two single-phase alloys, which compositions correspond to the compositions of the A2 and B2 phases in the selected RSA, are reported. Interestingly, and quite unexpectedly, the intrinsic mechanical behavior of the constituent A2 and B2 phases, deciphered for the first time in the present study, revealed that they are softer and substantially more ductile than the parent two-phase RSA. Furthermore, the ordered B2 phase exhibits a deformation twinning mechanism leading to twinning induced plasticity (TWIP) coupled with a low APB energy and activity of 1/2<111> dislocations. These mechanisms are thought to be responsible for the high plasticity of the ordered B2 phase. The results presented here question the current assumption that the ordered B2 phase in these RSAs has limited plasticity and strongly indicate that the nature of the B2/A2 interface boundaries and coherency strengthening play an important role in controlling the mechanical properties of the two-phase RSA.

36 MATERIALS SCIENCE↗

Mechanical properties of water-assembled graphene oxide Langmuir monolayers: Guiding controlled transfer

Liquid-phase transfer of graphene oxide (GO) and reduced graphene oxide (RGO) monolayers is investigated from the perspective of the mechanical properties of these films. Monolayers are assembled in a Langmuir–Blodgett trough, and oscillatory barrier measurements are used to characterize the resulting compressive and shear moduli as a function of surface pressure. GO monolayers are shown to develop a significant shear modulus (10–25 mN/m) at relevant surface pressures while RGO monolayers do not. The existence of a shear modulus indicates that GO is acting as a two-dimensional solid driven by strong interaction between the individual GO sheets. The absence of such behavior in RGO is attributed to the decrease in oxygen moieties on the sheet basal plane, permitting RGO sheets to slide across one another with minimum energy dissipation. Knowledge of this two-dimensional solid behavior is exploited to successfully transfer large-area, continuous GO films to hydrophobic Au substrates. The key to successful transfer is the use of shallow-angle dipping designed to minimize tensile stress present during the insertion or extraction of the substrate. A shallow dip angle on hydrophobic Au does not impart a beneficial effect for RGO monolayers, as these monolayers do not behave as two-dimensional solids and do not remain coherent during the transfer process. As a result, we hypothesize that this observed correlation between monolayer mechanical properties and continuous film transfer success is more universally applicable across substrate hydrophobicities and could be exploited to control the transfer of films composed of two-dimensional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light–Induced Frenkel Defect Pair Formation Can Lead to Phase–Segregation of Otherwise Miscible Halide Perovskite Alloys

Alloys of ABX 3 halide perovskites (HP) exhibit unique phase behavior compared to traditional III-V and II-VI semiconductor alloys used in solar cells. While the latter typically have good mutual miscibility when their mixed components are size matched, and phase-segregate when size mismatched, HP alloys show good miscibility in the dark but can phase-segregate under light. Quantum mechanical calculations described herein reveal light-induced defect formation and migration hold the key. Specifically, the interaction between a halogen vacancy V X with halogen interstitial X i forming together a Frenkel-pair defect emerges as the enabler for phase-segregation in HP alloys. At a threshold bromine composition in the Br-I alloys, the photogenerated holes in the valence band localize, creating thereby a doubly-charged iodine Frenkel-pair (V I + I i ) 2+ . Faster migration of iodine over bromine interstitial into the vacant iodine V I site leads to the formation of iodine-rich and iodine-depleted regions, establishing phase-segregation. Removal of the mobile defects–the agent of segregation–by dark thermal annealing, supplies the opposing force, leading to reversal of phase-segregation. Furthermore, this atomistic understanding can enable some control of the phase-segregation by selecting substituting elements on the B site–such as replacing some Pb by Sn–that are unable to form stable Frenkel defects.

14 SOLAR ENERGY↗

Production of deuterated biomass by cultivation of Lemna minor (duckweed) in D 2 O

The small aquatic plant duckweed, particularly the genus Lemna , widely used for toxicity testing, has been proposed as a potential source of biomass for conversion into biofuels as well as a platform for production of pharmaceuticals and specialty chemicals. Ability to produce deuterium-substituted duckweed can potentially extend the range of useful products as well as assist process improvement. Cultivation of these plants under deuterating conditions was previously been reported to require addition of kinetin to induce growth and was hampered by anomalies in cellular morphology and protein metabolism. Here, we report the production of biomass with 50–60% deuterium incorporation by long-term photoheterotrophic growth of common duckweed Lemna minor in 50% D 2 O with 0.5% glucose. L. minor grown in 50% D 2 O without addition of kinetin exhibited a lag phase twice that of H 2 O-grown controls, before start of log phase growth at 40% of control rates. Compared to continuous white fluorescent light, growth rates increased fivefold for H 2 O and twofold for 50% D 2 O when plants were illuminated at higher intensity with a metal halide lamp and a diurnal cycle of 12-h light/12-h dark. Deuterium incorporation was determined by a combination of 1 H and 2 H nuclear magnetic resonance (NMR) to be 40–60%. The cellulose from the deuterated plants had an average-number degree of polymerization (DP n ) and polydispersity index (PDI) close to that of H 2 O-grown controls, while Klason lignin content was reduced. Furthermore, the only major gross morphological change noted was root inhibition.

59 BASIC BIOLOGICAL SCIENCES↗

Three-Dimensional Bubble Fluidics in Architected Porous Media

Gas bubble flows in porous media often exhibit complex and seemingly unpredictable behaviors that are difficult to control. This lack of control limits the ability to design effective devices which manage multiphase flows. Here, we show how the design of 3D printed pores can deterministically control the flow path of an injected gas stream. Open cell structures can be designed to shape the gas/liquid interface with fidelity to control how the two phases are distributed throughout a porous material. The distributed gas volume is free to interact physically and chemically with the surrounding liquid phase, an effect we exploit to create a logical control gate to redirect flows within a lattice. This also allows us to design architectures for reactive capture and aerating bioreactors, resulting in patterned boundaries which can make more effective use of the liquid and gas reagents.

3D microfluidics↗

Automating Traffic Microsimulation from SYNCHRO UTDF to SUMO

Modern transportation research relies on seamlessly integrating traffic signal data with robust network representation and simulation tools. This study presents utdf2gmns, an open-source Python tool that automates conversion of the Universal Traffic Data Format, including network representation, signalized intersections, and turning volumes into the General Modeling Network Specification (GMNS) Standard. The resulting GMNS-compliant network can be converted for microsimulation in SUMO. By automatically extracting intersection control parameters and aligning them with GMNS conventions, utdf2gmns minimizes manual preprocessing and data loss. utdf2gmns also integrates with the Sigma-X engine to extract and visualize key traffic control metrics, such as phasing diagrams, turning volumes, volume-tocapacity ratios, and control delays. This streamlined workflow enables efficient scenario testing, accurate model building, and consistent data management. Validated through case studies, utdf2gmns reliably models complex urban corridors, promoting reproducibility and standardization. Documentation is available on GitHub and PyPI, supporting easy integration and community engagement.

Luo, Roy [ORNL] (ORCID:0009000312909983)↗

Rapid Dissolution of Soluble Uranyl Phases in Arid, Mine-Impacted Catchments Near Church Rock, NM

We tested the hypothesis that runoff of uranium-bearing particles from mining waste disposal areas was a significant mechanism for redistribution of uranium in the northeastern part of the Upper Puerco River watershed (New Mexico). However, our results were not consistent with this hypothesis. Analysis of >100 sediment and suspended sediment samples collected adjacent to and downstream from uranium source areas indicated that uranium levels in the majority of the samples were not elevated above background. Samples collected within 50 m of a known waste disposal site were subjected to detailed geochemical characterization. Uranium in these samples was found to be highly soluble; treatment with synthetic pore water for 24 h caused dissolution of 10-50% of total uranium in the samples. Equilibrium uranium concentrations in pore water were >4.0 mg/L and were sustained in repeated wetting events, effectively depleting soluble uranium from the solid phase. The dissolution rate of uranium appeared to be controlled by solid-phase diffusion of uranium from within uranium-bearing mineral particles. X-ray adsorption spectroscopy indicated the presence of a soluble uranyl silicate, and possibly a uranyl phosphate. These phases were exhausted in transported sediment suggesting that uranium was readily mobilized from sediments in the Upper Puerco watershed and transported in the dissolved load. These results could have significance for uranium risk assessment as well as mining waste management and cleanup efforts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Salt-Assisted 2H-to-1T' Phase Transformation of Transition Metal Dichalcogenides [plus supplemental information]

Phase engineering of nanomaterials (PEN) has demonstrated great potential in the fields of catalysis, electronics, energy storage and conversion, and condensed matter physics. Recently, transition metal dichalcogenides (TMDs) with unconventional metastable phases (e.g., 1T and 1T') have attracted increasing research interest due to their unique and appealing physicochemical properties. However, there is still a lack of a simple, universal, and controlled method for the preparation of large-scale and high-purity unconventional-phase TMD crystals, restricting their further fundamental study and practical applications. Here, a facile, one-step salt-assisted general strategy is reported for the controlled phase transformation of commercially available TMDs with conventional 2H phase, yielding a large amount of metastable 1T'-phase TMDs, including WS 2 , WSe 2 , MoS 2 , and MoSe 2 . It is found that the easily accessible metal salts, such as K 2 C 2 O 4 ·H 2 O, K 2 CO 3 , Na 2 CO 3 , Rb 2 CO 3 , Cs 2 CO 3 , KHCO 3 , NaHCO 3 , and NaC 2 O 4 , can be used to assist the 2H-to-1T' phase transformation, greatly simplifying the synthetic process for producing metastable 1T'-TMDs. Importantly, this method can also be used to prepare 1T'-TMD alloys, such as 1T'-WS 2x Se 2(1–x) . We report this newly developed strategy is robust and highly effective, which can also be used for the phase engineering of other materials with various polymorphs.

1T′ phase↗

Spontaneous assembly of hierarchical phases

We report the grand promise of self-assembly is the creation of target nanostructures through spontaneous molecular organization, a process that is — in principle — simpler and more scalable than laborious top-down nanofabrication methods. Yet self-assembly faces a fundamental challenge: the structures that form thermodynamically tend to minimize surface area and maximize symmetry; the most readily-accessible structures are thus quite simple. Block copolymer (BCP) self-assembly, for example, takes advantage of the chemical incompatibility along a polymer backbone to drive local phase separation; frustrated assembly leads to a nanoscale morphology whose unit cell is dictated by chain architecture. Canonical BCPs (linear chains with two blocks) form alternating lamellae and hexagonally-packed cylinders in a straightforward manner; but more exotic phases require additional control, for example directing the assembly using external forces, such as shear or chemical templates. An elegant alternative is to use synthetic methods to design more sophisticated chain architectures, which may give rise to new morphologies. An outstanding challenge is to achieve morphological control without undue synthetic burden. Sun et al. now report in Nature Nanotechnology the design and synthesis of novel triblock copolymers that give rise to structural order at multiple length scales, thereby forming complex and hierarchical nanoscale phases.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamics of Liquid–Liquid Phase Separation in Submicrometer Aerosol

Nanoscale materials, when compared to their bulk components, possess unique properties. In particular, shifts in phase transitions can occur for submicron particles. For instance, small particles do not undergo the process of liquid-liquid phase separation (LLPS). LLPS has applications in emulsions such as Janus particles, controllable morphology to create drug-rich phases during drug delivery, and is often observed in atmospheric aqueous aerosol particles. In atmospheric particles, LLPS is tracked as a function of particle water activity, which is equivalent to the relative humidity (RH) at equilibrium. We probed three organic/inorganic aerosol systems in the range of RH over which phase separation occurs (SRH). Our findings indicate that SRH for submicron aerosol particles is lower than for micron-sized droplets. These findings show that it may be necessary to update the representation of phase transitions in aerosol particles in climate models. The vast majority of organic/inorganic aerosol particles have submicron diameters, and a decrease in SRH for submicron particles indicates that the current estimation of phase separated aerosols may be overestimated. Furthermore, understanding the properties of LLPS at the nanoscale can provide key parameters to describe these systems and may lead to better control of phase separation in submicron particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Demonstration of a quantum logic gate in a cryogenic surface-electrode ion trap

We demonstrate quantum control techniques for a single trapped ion in a cryogenic, surface-electrode trap. A narrow optical transition of Sr{sup +} along with the ground and first excited motional states of the harmonic trapping potential form a two-qubit system. The optical qubit transition is susceptible to magnetic field fluctuations, which we stabilize with a simple and compact method using superconducting rings. Decoherence of the motional qubit is suppressed by the cryogenic environment. ac Stark shift correction is accomplished by controlling the laser phase in the pulse sequencer, eliminating the need for an additional laser. Quantum process tomography is implemented on atomic and motional states by use of conditional pulse sequences. With these techniques, we demonstrate a Cirac-Zoller controlled-not gate in a single ion with a mean fidelity of 91(1)%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding Part to Part Variability During Directed Energy Deposition Processes Using In Situ and Ex Situ Process Characterization

The overall goal of this technical collaboration is the use of in situ and ex situ characterization techniques to understand part to part variability in Ti-6Al-4V parts fabricated using directed energy deposition (DED) process, and subsequently qualify parts fabricated using AM. The primary goal of the Phase-1 of this CRADA was to demonstrate the feasibility of capturing the above changes using a combination of high speed stereo imaging and in situ monitoring using two wavelength pyrometers. The in situ monitoring was then correlated using ex situ characterization performed using optical microscopy. The results from phase-1 clearly show that changes to the process and shielding gases have a significant impact on the geometric conformity of the build and the build layer height. The results from phase-1 show that in addition to using IR thermography as a tool to measure the temperature and gradients, we could use it to monitor the build topography and the layer height and use the information to develop closed loop control systems. The phase-1 results show that there is a narrow zone under which the process must operate in order to be “passively stable” or autocorrect for over building. In addition, the results demonstrate that when operated within this range the build autocorrects and there is a drastic reduction in the interlayer lack of fusion defect formation.

36 MATERIALS SCIENCE↗

Realizing Steady-State Microbunching with Optical Stochastic Crystallization

Optical Stochastic Cooling (OSC) is a state-of-the-art beam cooling technology first demonstrated in 2021 at the IOTA storage ring at Fermilab's FAST facility. A second phase of the research program is planned to run in 2026 and will incorporate an optical amplifier to enable significantly increased cooling rates and greater operational flexibility. In addition to beam cooling, an OSC system can be configured to enable advanced control over the phase space of the beam. An example operational mode could enable crystallization, where the particles in a bunch are locked into a self-reinforcing, regular microstructure at the OSC fundamental wavelength; we refer to this as Optical Stochastic Crystallization (OSX). OSX represents a new path toward Steady-State Microbunching (SSMB), which may enable light sources combining the high brightness of a free-electron laser with the high repetition rate of a storage ring. Such a source has applications from the terahertz to the extreme ultraviolet (EUV), including high-power EUV generation for semiconductor lithography. This contribution will discuss the integration of OSX development as part of the OSC program at IOTA. The design of an accelerator lattice to enable the mechanism and associated high fidelity simulations will be shown, and a path to realizing an experimental demonstration will be discussed.

Wallbank, Michael James [Fermilab]↗

Steady-State Microbunching using Optical Stochastic Cooling

Optical Stochastic Cooling (OSC) is a state-of-the-art beam cooling technology first demonstrated in 2021 at the IOTA storage ring at Fermilab's FAST facility. A second phase of the research program is planned to run in 2026 and will incorporate an optical amplifier to enable significantly increased cooling rates and greater operational flexibility. In addition to beam cooling, an OSC system can be configured to enable advanced control over the phase space of the beam. An example operational mode could enable crystallization, where the particles in a bunch are locked into a self-reinforcing, regular microstructure at the OSC fundamental wavelength; we refer to this as Optical Stochastic Crystallization (OSX). OSX represents a new path toward Steady-State Microbunching (SSMB), which may enable light sources combining the high brightness of a free-electron laser with the high repetition rate of a storage ring. Such a source has applications from the terahertz to the extreme ultraviolet (EUV), including high-power EUV generation for semiconductor lithography. This contribution will discuss the integration of OSX development as part of the OSC program at IOTA. The design of an accelerator lattice to enable the mechanism and associated high fidelity simulations demonstrating the beam dynamics will be shown, and a path to realizing an experimental demonstration will be discussed.

Wallbank, Michael James [Fermilab]↗

Randomized Phase 3, Double-blind, Placebo-controlled Study of Prophylactic Gabapentin for the Reduction of Oral Mucositis Pain During the Treatment of Oropharyngeal Squamous Cell Carcinoma

The purpose of this paper is to determine whether prophylactic gabapentin usage in patients undergoing definitive concurrent chemotherapy and radiation therapy (chemoRT) for oropharyngeal cancer (OPC) improves treatment-related oral mucositis pain, opioid use, and feeding tube (FT) placement.

62 RADIOLOGY AND NUCLEAR MEDICINE↗