CO2 TO METHANOL USING PLASMA CATALYSIS AT ATMOSPHERIC PRESSURE
Explore the source record for details and available documents.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Nanosecond pulsed plasma has an enormous potential in many applications. In this paper, the characteristics of barrier free nanosecond pulsed surface discharge are investigated by the use of an actuator with a strip-strip film electrode configuration, including the effect of electrode width and the gap distance on the plasma morphology and electrical characteristics at atmospheric pressure. It was found that it is relative easier to generate a quasi uniform discharge with a thinner electrode width and a smaller gap distance. The underlying physical mechanism was also discussed. Besides that, the influence of airflow on repetitive pulsed surface discharge was examined. By comparing to the discharge produced by two different pulse waveforms in airflows, we found that the discharge driven by a faster pulse behaves more stable. Finally, a model was developed to analyze the interaction of the airflow and the discharge channels.
Eighteen plasma sprayed coating systems, nine based on the NiCoCrAly chemistry and nine based on the CoCrAly composition, were evaluated to identify coating systems which provide equivalent or superior life to that shown by the electron beam physical vapor deposited NiCoCrAly and CoCrAly coatings respectively. NiCoCrAly type coatings were examined on a single crystal alloy and the CoCrAly based coatings were optimized on the B1900+ Hf alloy. Cyclic burner rig oxidation and hot corrosion and tensile ductility tests used to evaluate the various coating candidates. For the single crystal alloy, a low pressure chamber plasma sprayed NiCoCrAly + Si coating exhibited a 2x oxidation life improvement at 1394 K (2050 F) over the vapor deposited NiCoCrAly material while showing equivalent tensile ductility. A silicon modified low pressure chamber plasma sprayed CoCrAly coating was found to be more durable than the baseline vapor deposited CoCrAly coating on the B1900+ Hf alloy.
Eighteen plasma sprayed coating systems, nine based on the NiCoCrAlY chemistry and nine based on the CoCrAlY composition, were evaluated to identify coating systems which will provide equivalent or superior life to that shown by the electron beam physical vapor deposited NiCoCrAlY and CoCrAlY coatings respectively. NiCoCrAlY-type coatings were examined on a single crystal alloy and the CoCrAlY based coatings were optimized on the B1900 + Hf alloy. Cyclic burner rig oxidation and hot corrosion and tensile ductility tests were used to evaluate the various coating candidates. For the single crystal alloy, a low pressure chamber plasma sprayed NiCoCrAlY + Si coating exhibited a 2X oxidation life improvement at 1121 C (2050 F) over the vapor deposited NiCoCrAlY material while showing equivalent tensile ductility. A silicon modified low pressure chamber plasma sprayed CoCrAlY coating was found to be more durable than the baseline vapor deposited CoCrAlY coating on the B1900 + Hf alloy.
The expansion of a laser-produced metallic plasma into a photoionized hydrogen background has been experimentally studied. Langmuir probe and microwave diagnostics have detected an interaction front which decelerates with a dependence on background density and time consistent with a momentum coupling between the laser plasma and the ionized fraction of the background. An ion percursor has also been observed. Calculations of scattering cross sections indicate that multiple-encounter Coulomb scattering will dominate collisional momentum transfer. The leading edge of the laser plasma contains multiply charged ions of charge state z greater than or equal to 5, and collisional effects appear adequate to explain the principal features of the momentum coupling. The ion precursor may have a collisionless origin.
The measurement of absolute densities of reactive species and radicals such as OH is of growing interest for many plasma applications. Here, we extend the use of a self-absorption model for atomic emission spectroscopy to molecular emission spectroscopy. The proposed analysis of self-absorbed molecular emission spectra is a simple and inexpensive method to determine OH(X) densities and rotational temperatures compared to laser induced fluorescence. We compare the recorded absolute OH density in a non-equilibrium diffuse atmospheric-pressure RF glow discharge by this method with broadband UV absorption considering a number of rotational lines with J' ≤ 6.5, the detection limit of the line integrated OH(X) density with this method is of the order of 2 × 10 19 m –2 . The accuracy of the density is sensitive to the rotational temperature of the OH(A) state and the non-equilibrium rotational population distribution.
Electromagnetic drift instabilities are studied in the conditions of a field reversed configuration (FRC). Dispersion equation is based on the set of Vlasov-Maxwell equations taking into account nonadiabatic responses both of ions and electrons. Considered drift instabilities are caused by density and temperature gradients. It is assumed that magnetic field of the FRC is purely poloidal. Two kinds of magnetic field nonuniformity are considered: (i) perpendicular gradient due to high beta values (beta is the plasma pressure/magnetic pressure) and (ii) curvature of magnetic lines. There is low frequency drift instability existing for high-beta regimes. Modes of such instability can propagate transversally to the unperturbed magnetic field lines.
The growth kinetics of single-walled carbon nanotubes (SWCNTs) in a low-temperature, low-pressure reactive plasma is investigated using a multiscale numerical simulation, including the plasma sheath and surface diffusion modules. The plasma-related effects on the characteristics of SWCNT growth are studied. It is found that in the presence of reactive radicals in addition to energetic ions inside the plasma sheath area, the effective carbon flux, and the growth rate of SWCNT increase. It is shown that the concentration of atomic hydrogen and hydrocarbon radicals in the plasma plays an important role in the SWCNT growth. The effect of the effective carbon flux on the SWCNT growth rate is quantified. The dependence of the growth parameters on the substrate temperature is also investigated. The effects of the plasma sheath parameters on the growth parameters are different in low- and high-substrate temperature regimes. The optimum substrate temperature and applied DC bias are estimated to maximize the growth rate of the single-walled carbon nanotubes.
By means of fully kinetic simulations, we investigate electron acceleration during magnetic reconnection in a nonrelativistic proton–electron plasma with conditions similar to solar corona and flares. We demonstrate that reconnection leads to a nonthermally dominated electron acceleration with a power-law energy distribution in the nonrelativistic low-β regime but not in the high-β regime, where β is the ratio of the plasma thermal pressure and the magnetic pressure. The accelerated electrons contain most of the dissipated magnetic energy in the low-β regime. A guiding-center current description is used to reveal the role of electron drift motions during the bulk nonthermal energization. We find that the main acceleration mechanism is a Fermi-type acceleration accomplished by the particle curvature drift motion along the electric field induced by the reconnection outflows. Although the acceleration mechanism is similar for different plasma β, low-β reconnection drives fast acceleration on Alfvénic timescales and develops power laws out of thermal distribution. The nonthermally dominated acceleration resulting from magnetic reconnection in low-β plasma may have strong implications for the highly efficient electron acceleration in solar flares and other astrophysical systems.
Ion acceleration phenomena at relativistic intense laser interaction with thin foil targets are studied to find an efficient laser-target interaction concept at the conditions, where neither the ponderomotive pressure of the laser light nor the hot electron pressure is negligible. Particle in cell simulations and the analytical model are allowing to predict optimum laser-target parameters and suggesting a significant increase of proton energy if a hybrid proton acceleration scheme is used. In the proposed scenario, the laser polarisation is changed during the acceleration process: First with circularly polarised laser light the target is accelerated as a whole by the ponderamotive pressure, and then with linearly polarised laser light the electrons are heated which additionally increases the accelerating field. The calculations are in good agreement with experimental findings.
Spatial distributions of charged particle concentration, electron temperature, and DC potential in an electrode microwave discharge in nitrogen at a pressure of 1 Torr have been measured using the double electric probe method. It has been shown that, near the electrode/antenna, the charged particle concentration exceeds a critical value. The concentration and heterogeneity of the discharge increase with increasing microwave power.
Results of two-dimensional hydrodynamic simulations of a surface glow discharge operating at pressures of 0.2-0.5 Torr in a nitrogen flow propagating with a velocity of 1000 m/s in the presence of external ionization are presented. The effect of the external ionization rate on discharge operation is analyzed. The current-voltage characteristics of the discharge are calculated for different intensities of external ionization in both the presence and absence of secondary electron emission from the cathode. The discharge structure and plasma parameters in the vicinity of the loaded electrode are considered. It is shown that, when the discharge operates at the expense of secondary emission from the cathode, the discharge current and cathode sheath configuration are insensitive to external ionization. It is also demonstrated that, even at a high rate of external ionization, the discharge operates due to secondary emission from the cathode.
The optical properties for radiofrequency (RF) post-discharge of pure helium (He) with two different methods as capacitively and inductively have been presented using the modified Boltzmann method in comparison. Optical emission spectroscopy (OES) is often used in the diagnosis of laboratory plasma, such as gas discharge plasma. OES is a very useful method for calculating of the electron temperature in the plasma and the determination of different atoms and molecules. In this study, OES is applied for characterizations of capacitively and inductively RF He plasma at pressures between 0.62 and 2.2 mbar for newly reactor type. Plasmas are generated with an RF power generator at a frequency of 13.56 MHz and output powers of 100, 160, and 200 W. Spectra have been evaluated in the range 200–1200 nm by an optical spectrometer. At low pressure, the main spectral features reported are the wavelengths of the atomic He transitions at 388.87 and 728.13 nm. The atomic emission intensities showed a maximum in inductive system when the pressure is about 0.62 mbar. OES of capacitive discharge and inductive discharge is compared in detail. The transition for 587.56 nm is shown to be increased in time.
The reflectivity of a short-pulse laser at intensities of 2 x 10 21 Wcm -2 with ultra-high contrast (10 -15 ) on sub-micrometer silicon nitride foilswas studied experimentally using varying polarizations and target thicknesses. Furthermore, the reflected intensity and beam quality were found to be relatively constant with respect to intensity for bulk targets. For submicron targets, the measured reflectivity drops substantially without a corresponding increase in transmission, indicating increased conversion of fundamental to other wavelengths and particle heating. The experimental results and trends we observed in 3D particle-in-cell simulations emphasize the critical role of ion motion due to radiation pressure on the absorption process. Ion motion during ultra-short pulses enhances the electron heating, which subsequently transfers more energy to the ions.
Zero-dimensional kinetic modeling of atmospheric pressure Ar–N 2 –H 2 nonthermal plasma was carried out to gain mechanistic insights into plasma-assisted catalytic synthesis of ammonia. Ar dilution is a common technique for tailoring plasma discharge properties and has been shown to enhance NH 3 formation when added to N 2 –H 2 plasma. The kinetic model was developed for a coaxial dielectric barrier discharge quartz wool-packed bed reactor operating at near room temperature using a kHz-frequency plasma source. With 30% Ar mixed in a 1:1 N 2 –H 2 plasma at 760 Torr, we find that NH 3 production is dominated by Eley–Rideal (E-R) surface reactions, which heavily involve surface NH x species derived from N and H radicals in the gas phase, while the influence of excited N 2 molecules is negligible. This is contrary to the commonly proposed mechanism that excited N 2 molecules created by Penning excitation of N 2 by Ar(4s) and Ar(4p) play a significant role in assisting NH 3 formation. Our model shows that the enhanced NH 3 formation upon Ar dilution is unlikely due to the interactions between Ar and H species, as excited Ar atoms have a weak effect on H radical formation through H 2 dissociation compared to electrons. We find that excited Ar atoms contribute to 28% of the N radical production in the gas phase via N 2 dissociation, while the rest are dominated by electron-impact dissociation. Furthermore, Ar species play a negligible role in the product NH 3 dissociation. N 2 conversion sensitivity analyses were carried out for electron number density (ne) and reduced electric field (E/N), and contributions from Ar to gas-phase N radical production were quantified. Finally, the model can provide guidance on potential reasons for observing enhanced NH 3 formation upon Ar dilution in N 2 –H 2 plasma beyond changes in the discharge characteristics.
Shock ignition is an inertial confinement fusion scheme where the ignition conditions are achieved in two steps. First, the DT shell is compressed at a low implosion velocity creating a central core at a low temperature and a high density. Then, a strong spherical converging shock is launched before the fuel stagnation time. It increases the central pressure and ignites the core. It is shown in this paper that this latter phase can be described analytically by using a self-similar solution to the equations of ideal hydrodynamics. A high and uniformly distributed pressure in the hot spot can be created thus providing favorable conditions for ignition. Analytic ignition criteria are obtained that relate the areal density of the compressed core with the shock velocity. The conclusions of the analytical model are confirmed in full hydrodynamic simulations.
For the first time, cathode and anode drops of powerful low-pressure amalgam lamps were measured. The lamp discharge current is 3.2 A, discharge current frequency is 43 kHz, linear electric power is 2.4 W/cm. The method of determination of a cathode drop is based on the change of a lamp operating voltage at variation of the electrode filament current at constant discharge current. The total (cathode plus anode) drop of voltage was measured by other, independent ways. The maximum cathode fall is 10.8 V; the anode fall corresponding to the maximal cathode fall is 2.4 V. It is shown that in powerful low pressure amalgam lamps the anode fall makes a considerable contribution (in certain cases, the basic one) to heating of electrodes. Therefore, the anode fall cannot be neglected, at design an electrode and ballast of amalgam lamps with operating discharge current frequency of tens of kHz.
The effect of equilibrium shear flow on the structure of out-of-plane magnetic field is analytically investigated in the two-fluid magnetohydrodynamic (MHD) regimes of the collisionless tearing instability, where the electron inertia breaks the frozen-in condition. Our scaling analysis reveals that the Alfvénic and sub-Alfvénic shear flows cannot significantly modify the linear regimes of applicability. In addition, we show that the structure of out-of-plane magnetic field can either be quadrupolar or non-quadrupolar in Hall-MHD regimes. In particular, both types of structures can dominate at β < 1 (β is the ratio of plasma kinetic pressure to the pressure in the magnetic field) depending on the value of the normalized ion inertial skin depth. This conclusion, however, is in contradiction to the claim presented by Rogers et al. [J. Geophys. Res. 108, A3 (2003)], which states that the quadrupolar structure cannot appear at β < 1. The reasons of this disagreement are discussed in our study.