Search NASA⌕ Search

SEARCH · Search NASA

Results for “Pathways Program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Broad substrate-specific phosphorylation events are associated with the initial stage of plant cell wall recognition in Neurospora crassa

Fungal plant cell wall degradation processes are governed by complex regulatory mechanisms, allowing the organisms to adapt their metabolic program with high specificity to the substrate at hand. While the uptake of representative plant cell wall mono- and disaccharides is known to induce specific transcriptional and translational responses, the processes related to early signal reception and transduction are still enigmatic. A fast and reversible way of transmitting extracellular signals throughout the cell are protein phosphorylations, which could initiate adaptations of the fungal metabolism on a post-translational level. In an effort to elucidate how changes in the initial substrate recognition phase of Neurospora crassa affect the global phosphorylation pattern, phosphoproteomics was performed after a short (2 minute) induction period with several plant cell wall-related mono- and disaccharides. The MS/MS-based peptide analysis revealed a large number of proteins that are phosphorylated or de-phosphorylated in a substrate-specific manner. A protein-protein-interaction network was constructed based on the proteins identified by MS/MS. Using this network, putative interaction partners of several phosphorylated proteins of interest were determined. This led to the discovery of substrate-specific protein-interactions that might be involved in mediating the substrate recognition of N. crassa. Besides a high number of kinases, phosphatases and transcription factors to be affected by differential phosphorylation, our data demonstrate, for example, that the cAMP signaling pathway is heavily modified by substrate-specific phosphorylations, including the key component adenylate cyclase CR-1 as well as several G-protein-coupled receptors. In addition, four differentially phosphorylated F-Box proteins were identified in the phospho-proteome. When physiologically characterized using the respective gene deletion strains, Fbx-19 and Fbx-22 were found to be involved in carbon catabolite repression responses. Overall, these results improve our understanding of how fungi respond to environmental cues and provide novel insights into the mechanisms of sensory perception and signal transduction during lignocellulose degradation.

59 BASIC BIOLOGICAL SCIENCES↗

SUBTASK 1.6 – BASIN ELECTRIC CARBON STORAGE RESEARCH PROJECT: NOVEL MONITORING TECHNIQUES

The Energy & Environmental Research Center (EERC) conducted baseline activities associated with an applied research project at Basin Electric Power Cooperative’s (Basin’s) carbon capture and storage (CCS) site in Beulah, North Dakota, to establish novel carbon storage-monitoring techniques as commercial methods under Cooperative Agreement No. DE-FE0024233, Subtask 1.6. The following report summarizes the baseline activities performed and briefly describes the subsequent (operational monitoring) activities that have been proposed to the U.S. Department of Energy (DOE) as part of the overall project to develop and demonstrate novel monitoring techniques at North America’s largest permitted CCS operation. Dakota Gasification Company (DGC), a wholly owned subsidiary of Basin, owns and operates the Great Plains Synfuels Plant (GPSP) approximately 5 miles northwest of the town of Beulah, North Dakota (Figure 1). In 2023, DGC received approval from the North Dakota Industrial Commission (NDIC) to develop a storage facility on-site for injecting a stream of carbon dioxide (CO2) captured from GPSP. DGC will transport the captured CO2 stream with approximately 6.8 miles of transmission lines that extend north of GPSP and inject >1 million tonnes (MMt) of CO2 annually (>1 MMt/yr) over a 12-year period with up to six underground injection control (UIC) Class VI-compliant injection wells completed in the Broom Creek Formation, a predominantly sandstone reservoir and saline aquifer underlying GPSP. The Broom Creek Formation lies approximately 5900 feet (ft) below ground surface (bgs) at GPSP. The commercial scale (i.e., >1 MMt/yr) of DGC’s permitted carbon storage project is ideal for developing and testing the novel monitoring techniques included within Subtask 1.6. The goals of this project are to demonstrate 1) the cost-effectiveness of novel monitoring technologies included as part of this research, 2) technology capability for tracking the CO2 plume and/or associated pressure response in the subsurface and monitoring out-of-zone migration, and 3) compliance with UIC Class VI program requirements. The research activities proposed for the overall project include 1) design of an automated, integrated, modular (AIM) monitoring station; 2) time-lapse electromagnetic (EM) field surveys; 3) drone-based surveillance studies; 4) time-lapse monitoring with seismic methods; 5) advanced wellbore-monitoring methods; 6) deployment of an AIM monitoring network; 7) EM monitoring of CO2 with real-time data processing; 8) continued seasonal drone-based surveillance studies; 9) seismic monitoring with passive and active surveys; and 10) wellbore monitoring with nuclear magnetic resonance (NMR) for near-surface characterization. Completion of Activities 1.0–5.0 (baseline activities) are described in this report. Upon authorization of funding by DOE, the EERC will initiate Activities 6.0– 10.0 (operational monitoring activities). Current state-of-the-art (SOA) carbon storage-monitoring techniques require countless labor hours dedicated to the acquisition of data. Once data are gathered, these SOA techniques often rely on commercial facilities to process raw data from the field. However, it is anticipated that next-generation monitoring techniques, such as those being demonstrated, will lower acquisition footprints, be less operationally intensive, and improve data acquisition efficiencies. These new techniques are more conducive to the application of machine learning, artificial intelligence, and automation, thus providing a pathway for integration into active control systems, informing site operability, and improving the integration of data for future CCS projects across the United States. Additionally, reclaimed and active mining lands are present within the project site, creating a unique opportunity to demonstrate the effectiveness of remote sensing and surface-based geophysics monitoring techniques at similar project sites that may include disturbed, unconsolidated, or actively excavated near-surface environments. The efforts included in the overall project will produce necessary designs, learnings, and data acquired during the baseline and operational monitoring periods that are necessary for time-lapse demonstration and validation of the described monitoring techniques. In addition, it is anticipated that the monitoring technologies included in this study will be compliant with UIC Class VI requirements to enable the potential for implementation at other CCS sites across the United States.

42 ENGINEERING↗

Robust Dissimilar Metal Friction Welded Spool for Enhanced Capability for Steam Power Components (Final Program Report)

This project successfully demonstrated the feasibility and advantages of producing durable, friction-welded dissimilar-metal spools, both with and without transition pieces, as well as the use of advanced oxidation-protective coatings for steam power applications. The work encompassed the optimization and full-scale production of NFA tubing, overcoming manufacturing and processing challenges to achieve enhanced strength, creep, and fatigue properties validated by extensive microstructural characterization. Optimized welding techniques were developed and refined for joining dissimilar materials, resulting in defect-free welds optimized for both low- and high-pressure boiler circuits. Systematic evaluation of welding parameters, coupled with heat treatments, ensured reliable performance and minimized weld defects such as banding and cracking. Comprehensive mechanical and non-destructive testing, including tensile, bend, fatigue, and CT scanning, confirmed the superior integrity and durability of the friction-welded joints under representative service conditions. To address oxidation-related degradation, a range of protective alloy coatings—such as IN625, APMT, Duplex 2507, and FeCrAlY—were selected and evaluated for their ability to counteract oxide notch formation at dissimilar metal interfaces. These coatings demonstrated improved oxidation resistance and long-term stability under thermal cycling, thereby extending weld service life. Thermal cyclic testing and long-term studies captured the phase stability and diffusion behavior of coated and uncoated configurations. Validated models for low-cycle fatigue (LCF), creep, and thermal mechanical fatigue (TMF) were developed to predict component life and failure modes. These models confirmed that friction-welded configurations exhibited significantly enhanced performance compared to conventional gas-tungsten arc welding (GTAW), with up to 7× improvement in creep resistance and at least 2× enhancement in fatigue properties. The introduction of a tailored transition piece further reduced thermally induced strains, enhancing fatigue life. The results demonstrate a robust pathway for retrofitting existing steam fleet components and upgrading future equipment to deliver substantially improved cold-start cycling behavior and reduction of unplanned outages due to premature weld failures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A review on the state of thermal hydraulics research on air ingress scenarios in High-Temperature Gas-cooled Reactors following a D-LOFC

With the expectation of near-immediate carbon neutrality, widespread implementation of proven High-Temperature Gas-cooled Reactors (HTGRs) embodies a viable solution pathway given their inherent, passive safety features and high thermal efficiency. This study provides an overview of the current state of research involving the thermal hydraulics associated with air ingress from a depressurized loss of forced cooling (D-LOFC) in HTGRs. Accurately characterizing and predicting the physical phenomena underlying air ingress is of paramount concern, as the integrity of the fuel and core graphite support structures are threatened by the presence of oxygen. Broadly speaking, the air ingress scenario can be delineated into three main stages: (1) Depressurization, (2) Density-Driven Flow, and (3) Natural Convection. In tandem with the underlying fundamental theory, this review collates and synthesizes the existing body of contemporary research concerning the air ingress scenario following a D-LOFC. As evinced by this review, our current understanding and predictive abilities have benefited from extensive research, predominantly concentrated on the rate of air ingestion into the core. Here, additional research is necessary to holistically capture the phenomenology of an air ingress scenario following a D-LOFC by considering an additional variable: the oxygen content of the ingressing air. The latter variable requires investigation into the complex interactions of the fully integrated system. Additionally, while numerical tools are evolving domestically through the Nuclear Energy Advanced Modeling and Simulation program, a sufficiently validated code remains absent.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Photochemistry of 1,1,1-Trifluoroacetone on Rutile TiO2(110)

The ultraviolet (UV) photon-induced photodecomposition of 1,1,1-trifluoroacetone (TFA) adsorbed on the rutile TiO2(110) surface has been investigated with photon stimulated desorption (PSD), temperature programmed desorption (TPD) and density functional theory (DFT). TFA adsorbed molecularly on the reduced surface (8% oxygen vacancies) in states desorbing below 300 K with trace thermal decomposition observed in TPD. Adsorption of TFA on a preoxidized TiO2(110) surface (accomplished by pre-exposure with 20 L O2) led to formation of a new TFA desorption state at 350 K, assigned to decomposition of a TFA-diolate species ((CF3)(CH3)COO). No TFA photochemistry was detected on the reduced surface. UV irradiation of TFA on the oxidized surface depleted TFA in the 350 K state, with TFA molecules in other TPD states unaffected. PSD measurements reveal that both carbonyl substituents (CH3 and CF3), as well as CO, were liberated during UV exposure at 95 K. Post-irradiation TPD showed evidence for both acetate (evolving as ketene at 650 K) and trifluoroacetate (evolving as CO2 at 600 K) as surface-bound photodecomposition products. The CO PSD product was not due to adsorbed CO, to mass spectrometer cracking of a CO-containing PSD product, or from background effects, but originated from complete fragmentation of an unidentified adsorbed TFA species. Thermodynamic analysis using DFT indicated that the photodecomposition of the TFA-diolate was likely not driven by thermodynamics alone as both pathways (CH3+trifluoroacetate and CF3+acetate) were detected when thermodynamics shows a clear preference for only one (CF3+acetate). These observations are in contrast to the photochemical behavior of acetone, butanone and acetaldehyde on TiO2(110), where only one of the two carbonyl substituent groups was observed, with a stoichiometric amount of carboxylate containing the other substituent left on the surface. We conclude that fluorination significantly alters the electronic structure of adsorbed carbonyls on TiO2(110) in such a way as to promote multiple channels of photofragmentation. Factors that dictate the partitioning between the three TFA channels are not related to photon energy (above that of the TiO2 band gap), but likely to the electronic structure of the charge transfer excited state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Emerging Pathways to Upgrade the US Housing Stock: A Review of the Home Energy Upgrade Literature

The residential buildings sector is responsible for about 20% of total US energy use. In order to achieve climate goals, we need ways to reduce carbon emissions and energy use in this sector. In addition, resiliency, electric grid stability, emergency survivability and other energy and building-related issues are becoming increasingly important challenges. New homes in most of the US meet various energy codes and are reasonably energy efficient. However, the vast majority of energy use is from existing homes that were not required to conform to energy performance requirements. It is becoming imperative to reach as many of these existing homes as possible and find ways to improve their energy-related performance. This must be done in such a way that it meets the needs and desires of homeowners and building occupants, as well as those of the contractors and design professionals engaged in doing the upgrades themselves. Energy retrofits of homes started in the 1970’s in response to the energy crisis, however, these retrofits were very limited in scope and relatively few homes were upgraded. Those homes that have been upgraded generally still have much scope for improvement. A huge effort is needed to get to scale to address the energy use in housing. The target population is effectively every home in the country, whether a large suburban single-family home, or a small downtown apartment. In order to provide a framework for analysis and the basis for plans to get to large-scale retrofits of homes, this literature review summarizes the state-of-the art in the US buildings industry. It identifies where more research, engineering, or technology is needed, as well as relevant industry trends, such as electrification, one-stop shop program design and others. It also examines other key topics, such as availability of financing, minimizing household disruption, and engaging home owners and occupants. This literature review builds on a similar review from several years ago (Less and Walker, 2014). The current review focuses on efforts in the intervening years. This literature review is part of a larger DOE study of deep energy upgrades that includes industry surveys and development of cost-stack analyses. For this review, we gathered data not just from the published literature, but also from practitioners in conjunction with other aspects of the larger DOE study. In some cases, we refer to comments from specific individuals or companies, or refer to specific products by name. This is not intended as an endorsement, but rather to provide clarity on sources of information and examples of relevant technologies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Combined treatment with fenretinide and indomethacin induces AIF-mediated, non-classical cell death in human acute T-cell leukemia Jurkat cells

Highlights: Black-Right-Pointing-Pointer The combination of fenretinide and indomethacin induces a high level of cell death. Black-Right-Pointing-Pointer Apoptotic pathway is caspase-independent. Black-Right-Pointing-Pointer Jurkat cells undergo AIF-mediated cell death. -- Abstract: Currently used cytotoxic drugs in cancer therapy have a similar mechanism of action and low specificity. Applied simultaneously, they show an additive effect with strong side effects. Clinical trials with the use of different agents in cancer therapy show that the use of these compounds alone is not very effective in fighting cancer. An alternative solution could be to apply a combination of these agents, because their combination has a synergistic effect on some cancer cells. Therefore, in our investigations we examined the effects of a synthetic retinoid-fenretinide when combined with a non-steroidal anti-inflammatory drug-indomethacin on the process of apoptosis in the acute human T-cell leukemia cell line Jurkat. We demonstrate that treatment with the combination of the tested compounds induces the death of cells, that is peculiar and combines features of apoptosis as well as non-apoptotic cell death. In detail we observed, cell membrane permeabilization, phosphatydylserine exposure, no oligonucleosomal DNA fragmentation, no caspase-3 activation, but apoptosis inducing factor (AIF) nuclear translocation. Taken together these results indicate, that Jurkat cells after treatment with a combination of fenretinide and indomethacin undergo AIF-mediated programmed cell death.

60 APPLIED LIFE SCIENCES↗

Acetate as a Platform for Carbon-Negative Production of Renewable Fuels and Chemicals (Final Technical Report)

This project was an industrial-academic collaboration between experts at the University of Wisconsin-Madison, the University of Kentucky, and LanzaTech, a world leader in the use of gas fermentation to sustainably produce fuels and chemicals. The project developed technologies to create an integrated process for converting carbon dioxide and renewable hydrogen into molecules that can be blended with liquid transportation fuels or used in an array of chemical applications. The project was motivated by the Program Objectives of eliminating carbon dioxide release in the production of chemicals by integrating the unique and efficient capabilities of two microorganisms into a single process. The first microbe, an acetogen, produces acetate from carbon dioxide and hydrogen while the second microbe upgrades acetate from acetogen fermentation permeates to higher-value chemical products. The carbon dioxide released in the upgrading process is recycled internally to produce more acetate. As such, the process can be designed to operate with zero carbon dioxide release and net positive carbon dioxide capture. The process has the potential to provide an alternative paradigm to the current bioeconomy – one in which acetate is the primary energy carrier instead of sugars. Our process by-passes photosynthesis and the barriers created by biomass as primary chemical feedstock. As such, the process can be scaled to meet existing sources of carbon dioxide emissions and located anywhere renewable hydrogen can be provided. Our work developed microorganisms with optimized metabolism for producing acetate and other microorganisms with improved conversion of acetate to dodecanol and dodecyl-acetate. We developed synthetic biology tools for a promising non-model bacterium that could enhance metabolic engineering efforts to convert acetate to chemical products. We conducted protein engineering studies to improve the activity of key enzymes involved in our metabolic pathways. We conducted a full technoeconomic analysis that set technical targets for each strain to meet economic goals. We identified key technical barriers in our process and proposed strategies to overcome them.

09 BIOMASS FUELS↗

Evaluating the Pharmacodynamics and Protective Efficacy of Catalytic Bioscavenger following Subcutaneous Administration in Guinea Pigs

Previous studies determined the guinea pig was a viableanimal model for evaluating subcutaneous ( s.c. )injection as an alternative route of administration of catalytic Bioscavengers:enzymes designed to render nerve agents non‐toxic in systemic circulation following exposure. Recent studies have focused on evaluating the pharmacodynamics (PD) and protective efficacy (PE) of the lead bioscavenger candidate, organophosphorus hydrolase (OPH) variant, YT, as both unmodified and modified (PEGylated) versions of the enzyme. A comparative study was conducted with YT and three progressively sized PEG‐YT variants (934, 935, and 936) following a single bolus s.c. dose (5 mg/kg). Bioavailability increased linearly with molecular size such that the largest sized PEG‐YT variant, 936, afforded the highest bioavailability, thus promoting 936 to subsequent PD and PEstudies. Dose dependence on bioavailability was also examined via three cohorts of guinea pigs receiving doses (5, 15, 20 mg/kg) of either YT or 936 in which a linear dose response was also found. Guinea pigs receiving either YT or 936 (5 mg/kg) via intramuscular (i.m. )or s.c. routes had superimposable PD profiles regardless of route, suggesting an identical absorption pathway for the drugs. Protective efficacy was also evaluated by exposing the animals to 2xLD 50 of sarin (GB) 7 dayspost‐enzyme administration; only the animals receiving 936 ( i.m. and s.c. ) survived 24 hours post‐exposure. Periodic s.c. dosing strategies were also evaluated with 936 in which three injections were administered either 2 or 24 hours apart for a total dose of 15 mg/kg followed by a protective efficacy assessment 8 days post‐administration. Overall these data support the use of s.c . injection as a practical route of administration for catalytic bioscavenger with PE Gylation, synergistically enhancing both bioavailability and extending drug half‐life in circulation. Support or Funding Information The views expressed in this abstract are those of the author(s) and do not reflect the official policy of the Department of Army, Department of Defense, or the U.S. Government. The experimental protocol was approved by the Animal Care and Use Committee at the United States Army Medical Research Institute of ChemicalDefense and all procedures were conducted in accordance with the principlesstated in the Guide for the Care and Use of Laboratory Animals and the AnimalWelfare Act of 1966 (P.L. 89–544), as amended. This work was supported by the Defense Threat Reduction Agency‐Joint Science and Technology Office, MedicalS&T Division. *Thisresearch was supported in part by an appointment to the Postgraduate ResearchParticipation Program at the U.S. Army Medical Research Institute of ChemicalDefense administered by the Oak Ridge Institute for Science and Educationthrough an interagency agreement between the U.S. Department of Energy and USAMRMC. This abstract is from the Experimental Biology 2018 Meeting. There is no full text article associated with this abstract published in The FASEB Journal .

Dao, Thuy↗

Emissions reduction scenarios in the Argentinean Energy Sector

Here in this paper the LEAP, TIAM-ECN, and GCAM models were applied to evaluate the impact of a variety of climate change control policies (including carbon pricing and emission constraints relative to a base year) on primary energy consumption, final energy consumption, electricity sector development, and CO 2 emission savings of the energy sector in Argentina over the 2010-2050 period. The LEAP model results indicate that if Argentina fully implements the most feasible mitigation measures currently under consideration by official bodies and key academic institutions on energy supply and demand, such as the ProBiomass program, a cumulative incremental economic cost of 22.8 billion US$(2005) to 2050 is expected, resulting in a 16% reduction in GHG emissions compared to a business-as-usual scenario. These measures also bring economic co-benefits, such as a reduction of energy imports improving the balance of trade. A Low CO 2 price scenario in LEAP results in the replacement of coal by nuclear and wind energy in electricity expansion. A High CO 2 price leverages additional investments in hydropower. An emission cap scenario (2050 emissions 20% lower than 2010 emissions) is feasible by including such measures as CCS and Bio CCS, but at a significant cost. By way of cross-model comparison with the TIAM-ECN and GCAM global integrated assessment models, significant variation in projected emissions reductions in the carbon price scenarios was observed, which illustrates the inherent uncertainties associated with such long-term projections. These models predict approximately 37% and 94% reductions under the High CO 2 price scenario, respectively. By comparison, the LEAP model, using an approach based on the assessment of a limited set of mitigation options, predicts a 11.3% reduction under the ‘high’ carbon tax. The main reasons for this difference are differences in assumptions about technology cost and availability, CO 2 storage capacity, and the ability to import bioenergy. In terms of technology pathways, the models agree that fossil fuels, in particular natural gas, will remain an important part of the electricity mix in the core baseline scenario. Finally, according to the models there is agreement that the introduction of a carbon price will lead to a decline in absolute and relative shares of aggregate fossil fuel generation. However, predictions vary as to the extent to which coal, nuclear and renewable energy play a role.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Identification of DSB-1, a Protein Required for Initiation of Meiotic Recombination in Caenorhabditis elegans , Illuminates a Crossover Assurance Checkpoint

Meiotic recombination, an essential aspect of sexual reproduction, is initiated by programmed DNA double-strand breaks (DSBs). DSBs are catalyzed by the widely-conserved Spo11 enzyme; however, the activity of Spo11 is regulated by additional factors that are poorly conserved through evolution. To expand our understanding of meiotic regulation, we have characterized a novel gene, dsb-1, that is specifically required for meiotic DSB formation in the nematode Caenorhabditis elegans. DSB-1 localizes to chromosomes during early meiotic prophase, coincident with the timing of DSB formation. DSB-1 also promotes normal protein levels and chromosome localization of DSB-2, a paralogous protein that plays a related role in initiating recombination. Mutations that disrupt crossover formation result in prolonged DSB-1 association with chromosomes, suggesting that nuclei may remain in a DSB-permissive state. Extended DSB-1 localization is seen even in mutants with defects in early recombination steps, including spo-11, suggesting that the absence of crossover precursors triggers the extension. Strikingly, failure to form a crossover precursor on a single chromosome pair is sufficient to extend the localization of DSB-1 on all chromosomes in the same nucleus. Based on these observations we propose a model for crossover assurance that acts through DSB-1 to maintain a DSB-permissive state until all chromosome pairs acquire crossover precursors. This work identifies a novel component of the DSB machinery in C. elegans, and sheds light on an important pathway that regulates DSB formation for crossover assurance.

59 BASIC BIOLOGICAL SCIENCES↗

Structure-guided development of a high-affinity human Programmed Cell Death-1: Implications for tumor immunotherapy

Programmed Cell Death-1 (PD-1) is an inhibitory immune receptor, which plays critical roles in T cell co-inhibition and exhaustion upon binding to its ligands PD-L1 and PD-L2. We report the crystal structure of the human PD-1 ectodomain and the mapping of the PD-1 binding interface. Mutagenesis studies confirmed the crystallographic interface, and resulted in mutant PD-1 receptors with altered affinity and ligand-specificity. In particular, a high-affinity mutant PD-1 (HA PD-1) exhibited 45 and 30-fold increase in binding to PD-L1 and PD-L2, respectively, due to slower dissociation rates. This mutant (A132L) was used to engineer a soluble chimeric Ig fusion protein for cell-based and in vivo studies. HA PD-1 Ig showed enhanced binding to human dendritic cells, and increased T cell proliferation and cytokine production in a mixed lymphocyte reaction (MLR) assay. Moreover, in an experimental model of murine Lewis lung carcinoma, HA PD-1 Ig treatment synergized with radiation therapy to decrease local and metastatic tumor burden, as well as in the establishment of immunological memory responses. Our studies highlight the value of structural considerations in guiding the design of a high-affinity chimeric PD-1 Ig fusion protein with robust immune modulatory properties, and underscore the power of combination therapies to selectively manipulate the PD-1 pathway for tumor immunotherapy.

59 BASIC BIOLOGICAL SCIENCES↗

Reaction Rate Theory in Coordination Number Space: An Application to Ion Solvation

Understanding reaction mechanisms in many chemical and biological processes require application of rare event theories. In these theories, an effective choice of a reaction coordinate to describe a reaction pathway is essential. To this end, we study ion solvation in water using molecular dynamics simulations and explore the utility of coordination number (n = number of water molecules in the first solvation shell) as the reaction coordinate. Here we compute the potential of mean force (W(n)) using umbrella sampling, predicting multiple metastable n-states for both cations and anions. We find with increasing ionic size, these states become more stable and structured for cations when compared to anions. We have extended transition state theory (TST) to calculate transition rates between n-states. TST overestimates the rate constant due to solvent-induced barrier recrossings that are not accounted for. We correct the TST rates by calculating transmission coefficients using the reactive flux method. This approach enables a new way of understanding rare events involving coordination complexes. We gratefully acknowledge Liem Dang and Panos Stinis for useful discussion. This research used resources of the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. SR, CJM, and GKS were supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. MDB was supported by MS3 (Materials Synthesis and Simulation Across Scales) Initiative, a Laboratory Directed Research and Development Program at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated by Battelle for the U.S. Department of Energy.

Roy, Santanu↗

Stem Inc. SunShot Incubator Program Final Technical Report

In this Energy Storage Control Algorithms project, Stem sought to develop tools and control algorithms to increase the value and reduce balance-of-system and grid integration costs associated with adding distributed solar generation to the grid. These advances fell under the headings SolarScope and SolarController. Stem sought to create initial market traction with a fully commercialized product for the solar industry to size storage systems (SolarScope) as well as a solar intermittency-mitigation framework for utilities (SolarController) in the course of the project. The company sought to align strategic growth plans and enable the rollout of the products to broader audiences in multiple geographic regions by leveraging the major solar companies in the national market as partners. Both final products were both intended to be commercialized. They are: SolarScope: Analysis tool to identify viable PV + storage projects and thereby expedite the sales and interconnection processes. SolarScope combines customer load data, PV production estimates, utility rate tariff, and simulated storage into a simple user interface for PV developers. Developers can easily identify viable solar + storage sites without the need for complex and time consuming, site-by-site spreadsheet modeling. SolarContoller: Tool to autonomously dispatch distributed storage in order to mitigate voltage fluctuation and reduce curtailment. SolarController co-optimizes, in real time, storage dispatch for circuit stability and curtailment reduction, enabling higher penetrations of PV. SolarController is automated, not requiring utility dispatch or management, as Stem hardware senses grid voltage, frequency, customer load, PV production, and power factor. In the end the two products met with different outcomes. SolarScope was tested by potential users, and continues to be used as a foundational platform for partnership with key solar industry partners. SolarController, on the other hand, was successful in lab testing but was not commercialized due to a lack of marketability and lack of interested customer base. Together the development of these two products marked a material step forward for Stem; and a new milestone along the pathway of integration for the solar and storage industries. SolarScope is leading to real, out-of-the-lab project development in storage + solar for the commercial customer sector. Meanwhile SolarController has opened the eyes of regulators and utility executives alike to the potential of distributed solar and by doing so, has moved the conversation forward for the integration of distributed energy resources more broadly on the grid.

25 ENERGY STORAGE↗

Achieving 50% Energy Savings in Chicago Homes: A Case Study for Advancing Equity and Climate Goals

Since 2019, the National Renewable Energy Laboratory (NREL) and Elevate have collaborated to identify pathways to deep energy retrofits in Chicago's housing stock, document equity implications and co-benefits of this transition, and validate the findings by implementing retrofits in real Chicago homes. This document summarizes our analysis process to model advanced retrofit packages that lead to greater than 50% energy savings in Chicago homes. Based on these findings, we have also developed a roadmap with the City to guide implementation, and are deploying the recommended retrofit packages in real Chicago homes to realize these energy savings. This work was developed in collaboration with two key stakeholders - the City of Chicago and Commonwealth Edison (ComEd) - and funded by the U.S. Department of Energy (DOE). NREL's Residential Buildings team maintains the best-in-class ResStock™ energy model of the U.S. residential building stock. For this work, we calibrated ResStock to Chicago's unique local housing stock to accurately simulate energy use in Chicago homes both for current conditions and with various retrofit scenarios. We simulated a wide range of potential building retrofits covering all aspects of residential energy use and then grouped these into packages based on energy and utility bill savings. ResStock can model diverse building types and housing characteristics, so we're able to observe the range of outcomes that might occur when these upgrades are deployed across the entire housing stock. We can then estimate potential energy savings from an advanced retrofit program on Chicago's housing stock by comparing the modeled energy use before versus after a retrofit. This novel version of ResStock, calibrated to Chicago with data from Elevate, can help City officials, ComEd, and other partners plan for community-scale decarbonization via residential retrofits. Specifically, this work contributes the following project goals: Develop a building retrofit prioritization strategy for Chicago single-family and 2- to 4-unit buildings; Identify neighborhoods and home types that have the highest potential for savings from electrification; and Assess the impact of advanced building retrofits on energy use, utility bills, and CO2 emissions at the city and building level. Although this study is specific to Chicago, its methods and learnings are applicable across the United States. These findings are especially notable for heat pumps and electrification retrofits in cold climates.

building energy modeling↗

Development and Field Assessment of Transgenic Hybrid Switchgrass for Improved Biofuel Traits

Development of commercially relevant bioenergy switchgrass cultivars requires reducing recalcitrance for bioprocessing without compromising biomass yield. Low-lignin transgenic switchgrass has been produced via down-regulation of caffeic acid O-methyltransferase (COMT), a lignin biosynthetic enzyme, or by over-expression of the MYB4 transcription factor, a repressor of the lignin biosynthetic pathway. The aim of this study was to evaluate parents and selected hybrids obtained from COMT and MYB4 hybrid families under field conditions for agronomic performance and biomass quality. Plant height, width, number of tillers, dry weight, cell wall composition including lignin content, and sugar release were measured after the establishment year (2014) and the second growing season (2015). For COMT hybrids, biomass yield of the transgenic hybrids was similar to or greater than the wild-type parents selected for high biomass. Lignin content of COMT transgenic hybrids was reduced by 10%, S/G ratio decreased by 27%, and sugar release increased between 20% and 44% compared to their wild-type parents. These results indicate that hybridization of COMT with a high-yielding locally selected genotype resulted in both improved agronomic performance and enhanced biomass quality in the offspring. On the other hand, the MYB transgenic hybrid showed a 10% reduction in biomass yield compared with its wild-type parent in year 1, but not in year 2. The lignin S/G ratio was not reduced in MYB transgenic hybrids, nor was sugar release increased. These data indicate that the MYB transgene may not be suitable for an agronomic setting. More testing is needed of transgenic and wild-type, high-biomass selections for use as breeding parents. These results show that combining low-lignin transgenic switchgrass with a breeding and selection program for biomass yield will allow for the deployment of effective transgenes in high-yielding genetic backgrounds.

09 BIOMASS FUELS↗

A Hard X-ray Study of a Manganese-Terpyridine Dimer Catalyst in a Chromium-Based Metal Organic Framework

Much of today’s scientific research is geared toward discovering clean energy from renewable sources. A promising approach is to split water into its fundamental elements – hydrogen and oxygen. The hydrogen produced from this process is a source of clean energy. Plants carry out this water splitting routinely as a part of photosynthesis, but we cannot do this readily as the reaction requires a lot of energy, negating the value of cleaner and plentiful energy from hydrogen. Adding a catalyst provides an alternative pathway for the reaction so that it can proceed with lower energy input. Many such catalysts have been developed; the one used in this study is manganese based and is called manganese-terpyridine dimer (MnTD). The problem is that when individual molecules of MnTD interact they destroy each other, which limits practical use of the catalyst. However, by placing the catalyst in a Metal Organic Framework (MOF), the molecules of MnTD can be separated so that, in principle, they do not interact with each other and only interact with water. The MOF is essentially a repetition of boxes, and each box should contain one MnTD molecule. However, preliminary studies showed that a different molecule, not MnTD, may be inside the boxes. My research focused on identifying which molecules are present in the MOF. The primary method of analysis used was x-ray powder diffraction, a technique in which x-rays are scattered by a sample, and the intensity of the scattered radiation is measured as a function of scattering angle. Three samples were analyzed; one contained only the MOF, one contained the MOF and catalyst before catalysis, and one contained the MOF and catalyst during catalysis. The diffraction experiments were carried out at the Stanford Synchrotron Radiation Lightsource (SSRL) at SLAC National Accelerator Laboratory. Initial results revealed that the MOF structure falls apart during catalysis. To further analyze the data, I used several computer programs, including GSAS II, FOX, and VESTA. These programs allowed me to create maps that showed regions of electron density within the MOF and gave me clues as to which molecules were present. I found that MnTD was not the catalytic molecule in the MOF. The preliminary studies showed that manganese oxide is likely present, which is consistent with by data. However, the catalytic rate for this system is much higher than that reported for manganese oxide, and thus future studies are needed to verify the identity of the catalytic molecule and determine the reasons for its unusually high rate of catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photooxidation and Photodesorption in the Photochemistry of Isobutene on TiO2(110)

The photochemistry of isobutene was examined on the rutile TiO2(110) surface as a function of the surface pretreatment condition and irradiation temperature using temperature programmed desorption (TPD) and photon stimulated desorption (PSD). Isobutene adsorbs molecularly on the clean TiO2(110) surface without detectable thermal decomposition. Preadsorption of oxygen, either as atoms or chemisorbed molecules, did not promote thermal reactions with isobutene, but instead blocked isobutene adsorption sites. Ultraviolet (UV) light irradiation of isobutene adsorbed on the clean surface led to depletion through photodesorption without significant photodecomposition. Isobutene PSD yields increased with increasing surface temperature suggesting that activated molecules sample their physisorbed potential energy surface during photodesorption. Preadsorption of oxygen promoted partial photooxidation of adsorbed isobutene to acetone, methacrolein and isobutanal. Acetone was only detected when molecular oxygen was present, indicating that O2 addition occurred across the C=C bond. In contrast, results from use of D6-isobutene indicated that coadsorption with either O adatoms or O2 molecules led to photochemical production of methacrolein (and likely isobutanal) through C-H bond cleavage on a methyl group. Irradiation an adlayer comprised of isobutene isolated from the surface by 1 ML of preadsorbed O2 showed the most photoconversion of isobutene, which suggests that photoactivation of adsorbed O2 is a key step in partial photooxidation of isobutene. Comparison of the isobutene PSD and oxidation product yields as a function of surface temperature between 20 and 120 K indicates a competition between photooxidation and photodesorption that varies with temperature. ‘Direct’ charge transfer events between isobutene and the surface, favored at higher temperature, compete with partial oxidation pathways initiated by ‘indirect’ activation of isobutene by O2, which is favored at low temperature. Access of O2 to the surface is critical to achieving desired isobutene photooxidation rates and products, and isobutene photodesorption may provide a means of regulating the isobutene surface coverage. Work reported here was supported by the U.S. Department of Energy, Office of Basic Energy Science, Division of Chemical Sciences, Geosciences, and Biosciences, and performed in the Williams R. Wiley Environmental Molecular Science Laboratory (EMSL), a Department of Energy user facility funded by the Office of Biological and Environmental Research. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for the U.S. Department of Energy by the Battelle Memorial Institute under contract DEAC05-76RL01830.

Environmental Molecular Sciences Laboratory↗