Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Atomic Bloch-Zener oscillations for sensitive force measurements in a cavity

Cold atoms in an optical lattice execute Bloch-Zener oscillations when they are accelerated. We have performed a theoretical investigation into the case when the optical lattice is the intracavity field of a driven Fabry-Perot resonator. When the atoms oscillate inside the resonator, we find that their back-action modulates the phase and intensity of the light transmitted through the cavity. We solve the coupled atom-light equations self-consistently and show that, remarkably, the Bloch period is unaffected by this back-action. The transmitted light provides a way to observe the oscillation continuously, allowing high-precision measurements to be made with a small cloud of atoms.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effective time-independent description of optical lattices with periodic driving

For a periodically driven quantum system, an effective time-independent Hamiltonian is derived with an eigen-energy spectrum, which in the regime of large driving frequencies approximates the quasienergies of the corresponding Floquet Hamiltonian. The effective Hamiltonian is evaluated for the case of optical lattice models in the tight-binding regime subjected to strong periodic driving. Three scenarios are considered: a periodically shifted one-dimensional (1D) lattice, a two-dimensional (2D) square lattice with inversely phased temporal modulation of the well depths of adjacent lattice sites, and a 2D lattice subjected to an array of microscopic rotors commensurate with its plaquette structure. In the 1D scenario, the rescaling of the tunneling energy, previously considered by Eckardt et al. [Phys. Rev. Lett. 95, 260404 (2005)] is reproduced. The 2D lattice with well-depth modulation turns out as a generalization of the 1D case. In the 2D case with staggered rotation, the expression previously found in the case of weak driving by Lim et al. [Phys. Rev. Lett. 100, 130402 (2008)] is generalized, such that its interpretation in terms of an artificial staggered magnetic field can be extended into the regime of strong driving.

74 ATOMIC AND MOLECULAR PHYSICS↗

Initial cooperative decay rate and cooperative Lamb shift of resonant atoms in an infinite cylindrical geometry

We obtain in both the scalar and vector photon models the analytical expressions for the initial cooperative decay rate and the cooperative Lamb shift for an ensemble of resonant atoms distributed uniformly in an infinite cylindrical geometry for the case that the initial state of the system is prepared in a phased state modulated in the direction of the cylindrical axis. We find that qualitatively the scalar and vector theories give different results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic fluctuations in the itinerant ferromagnet LaCrGe 3 studied by La 139 NMR

LaCrGe 3 is an itinerant ferromagnet with a Curie temperature of T C = 85 K and exhibits an avoided ferromagnetic quantum critical point under pressure through a modulated antiferromagnetic phase as well as tricritical wing structure in its temperature-pressure-magnetic field ( T – p – H ) phase diagram. In order to understand the static and dynamical magnetic properties of LaCrGe 3 , we carried out La 139 nuclear magnetic resonance (NMR) measurements. Based on the analysis of NMR data, using the self-consistent-renormalization (SCR) theory, the spin fluctuations in the paramagnetic state are revealed to be isotropic ferromagnetic and three dimensional (3D) in nature. Furthermore, the system is found to follow the generalized Rhodes-Wohlfarth relation which is expected in 3D itinerant ferromagnetic systems. As compared to other similar itinerant ferromagnets, the Cr 3 d electrons and their spin fluctuations are characterized to have a relatively high degree of localization in real space.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stable Bloch Oscillations of Cold Atoms with Time-Dependent Interaction

We investigate Bloch oscillations of interacting cold atoms in a mean-field framework. In general, atom-atom interaction causes dephasing and destroys Bloch oscillations. Here we show that Bloch oscillations are persistent if the interaction is modulated harmonically with suitable frequency and phase. For other modulations, Bloch oscillations are rapidly damped. We explain this behavior in terms of collective coordinates whose Hamiltonian dynamics permits one to predict a whole family of stable solutions. In order to describe also the unstable cases, we carry out a stability analysis for Bogoliubov excitations. Using Floquet theory, we are able to predict the unstable modes as well as their growth rate, found to be in excellent agreement with numerical simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ferromagnetic quantum critical point avoided by the appearance of another magnetic phase in LaCrGe 3 under pressure

Here, the temperature-pressure phase diagram of the ferromagnet LaCrGe 3 is determined for the first time from a combination of magnetization, muon-spin-rotation, and electrical resistivity measurements. The ferromagnetic phase is suppressed near 2.1 GPa, but quantum criticality is avoided by the appearance of a magnetic phase, likely modulated, AFMQ. Our density functional theory total energy calculations suggest a near degeneracy of antiferromagnetic states with small magnetic wave vectors Q allowing for the potential of an ordering wave vector evolving from Q=0 to finite Q, as expected from the most recent theories on ferromagnetic quantum criticality. Our findings show that LaCrGe 3 is a very simple example to study this scenario of avoided ferromagnetic quantum criticality and will inspire further study on this material and other itinerant ferromagnets.

36 MATERIALS SCIENCE↗

Lamellar fluctuations melt ferroelectricity.

We consider a standard Ginzburg-Landau model of a ferroelectric whose electrical polarization is coupled to gradients of elastic strain. At the harmonic level, such flexoelectric interaction is known to hybridize acoustic and optic phonon modes and lead to phases with modulated lattice structures that precede the state with spontaneously broken inversion symmetry. Here, we use the self-consistent phonon approximation to calculate the effects of thermal and quantum polarization fluctuations on the bare hybridized modes to show that such long-range modulated order is unstable at all temperatures. We discuss the implications for the nearly ferroelectric SrTiO3 and KTaO3, and we propose that these systems are melted versions of an underlying modulated state that is dominated by nonzero momentum thermal fluctuations except at the very lowest temperatures.

Guzman-Verri, G. G.↗

Analysis of Pulse Replicators for High-Bandwidth, High-Dynamic-Range, Single-Shot Optical Characterization

Optical pulse replicators generate multiple replicas of an optical waveform that are averaged to increase the signal-to-noise ratio of single-shot, high-bandwidth temporal measurements. Processing a replicated waveform requires that the delayed realizations of the waveform under test be retimed properly before averaging. Delay miscalibration significantly reduces the measurement bandwidth. Processing algorithms based on edge alignment, centroid matching, and minimization of the distance between replicas decrease the impact of the detrimental bandwidth reduction, and a global distance minimization, simultaneously taking into account the distance between all pairs of retimed replicas, has the best performance, even in the presence of significant measurement noise. The general impact of chromatic dispersion on the averaged waveform is derived in the framework of the temporal transport-of-intensity equation, and the measurement error is quantified for various optical signals.

Dispersion, fiber optics, frequency response, opti↗

On Zero Steady-State Error Voltage Control of Single-Phase PWM Inverters With Different Load Types

This paper comprehensively investigates and compares different multiloop linear control schemes for single-phase pulsewidth modulation inverters, both in stationary and synchronous (d-q) frames, by focusing on their steady-state error under different loading conditions. Specifically, it is shown how proportional plus resonant (P + R) control and load current feedback (LCF) control can, respectively, improve the steady-state and transient performance of the inverter, leading to the proposal of a PID + R + LCF control scheme. Furthermore, the LCF control and capacitive current feedback control schemes are shown to be subject to stability issues under second and higher order filter loads. Additionally, the equivalence between the stationary frame and d-q frame controllers is discussed depending on the orthogonal term generation method, and a d-q frame voltage control strategy is proposed eliminating the need for the generation of this orthogonal component. This is achieved while retaining all the advantages of operating in the synchronous d-q frame, i.e., zero steady-state error and ease of implementation. All theoretical findings are validated experimentally using a 1.5 kW laboratory prototype.

42 ENGINEERING↗

Dual Active Bridge based DC Transformer LabVIEW FPGA Control Code [SWR-16-25]

In the area of power electronics control, Field Programmable Gate Arrays (FPGAs) have the capability to outperform their Digital Signal Processor (DSP) counterparts due to the FPGA’s ability to implement true parallel processing and therefore facilitate higher switching frequencies, higher control bandwidth, and/or enhanced functionality. National Instruments (NI) has developed two platforms, Compact RIO (cRIO) and Single Board RIO (sbRIO), which combine a real-time processor with an FPGA. The FPGA can be programmed with a subset of the well-known LabVIEW graphical programming language. The candidate software implements complete control algorithms in LabVIEW FPGA for a DC Transformer (DCX) based on a dual active bridge (DAB). A DCX is an isolated bi-directional DC-DC converter designed to operate at unity conversion ratio, M, defined by where Vin is the primary-side DC bus voltage, Vout is the secondary-side DC bus voltage, and n is the turns ratio of the embedded high frequency transformer (HFX). The DCX based on a DAB incorporates two H-bridges, a resonant inductor, and an HFX to provide this functionality. The candidate software employs phase-shift modulation of the two H-bridges and a feedback loop to regulate the conversion ratio at unity. The software also includes alarm-handling capabilities as well as debugging and tuning tools. The software fits on the Xilinx Virtex V LX110 FPGA embedded in the NI cRIO-9118 FPGA chassis, and with a 40 MHz base clock, supports a modulation update rate of 40 MHz, and user-settable switching frequencies and synchronized control loop update rates of tens of kHz.

Source record↗

Confidentiality-preserving machine learning algorithms for soft-failure detection in optical communication networks

Automated fault management is at the forefront of next-generation optical communication networks. The increase in complexity of modern networks has triggered the need for programmable and software-driven architectures to support the operation of agile and self-managed systems. In these scenarios, the European Telecommunications Standards Institute zero-touch network and service management approach is imperative. The need for machine learning algorithms to process the large volume of telemetry data brings safety concerns as distributed cloud-computing solutions become the preferred approach for deploying reliable communication network automation. This paper’s contribution is twofold. First, we propose a simple yet effective method to guarantee the confidentiality of the telemetry data based on feature scrambling. The method allows the operation of third-party computational services without direct access to the full content of the collected data. Additionally, the effectiveness of four unsupervised machine learning algorithms for soft-failure detection is evaluated when applied to the scrambled telemetry data. The methods are based on factor analysis, principal component analysis, nonlinear principal component analysis, and singular value decomposition. Most dimensionality reduction algorithms have the common property that they can maintain similar levels of fault classification performance while hiding the data structure from unauthorized access. Evaluations of the proposed algorithms demonstrate this capability.

97 MATHEMATICS AND COMPUTING↗

Quasi-rotating frame: accurate line shape determination with increased efficiency in noncollinear 2D optical spectroscopy

Multidimensional spectroscopies correlate the oscillation frequencies of an atomic or molecular resonance during at least two different time periods. For two-dimensional (2D) optical spectroscopy, oscillations in the first coherence period are sampled in the time domain point-bypoint. Here, we present a general method for accelerating this often lengthy task, the Quasi-Rotating Frame (QRF), through heterodyne detection of the nonlinear signal pulse with a systematic variably delayed local oscillator pulse in a non-collinear (box-CARS) geometry four wave mixing experiment. 2D infrared (2D IR) vibrational echo experiments are conducted to demonstrate the QRF technique, and the results are compared to data obtained in the stationary frame. We describe straightforward techniques to configure QRF detection, prevent experimental artifacts, appropriately calibrate the rotating frame frequencies, and process the resulting data such that accurate liquid structural dynamics may be extracted from a series of waiting-timedependent 2D spectral line shapes.

14 SOLAR ENERGY↗

Overcoming energy limitation in post-compression of picosecond pulses by free beam propagation in air and temporal pulse splitting and recombining

Cryogenically cooled diode-pumped Yb:YAG has been demonstrated to efficiently generate pulses of >1 J energy and several picoseconds duration at a kilohertz repetition rate. Pulse broadening and post-compression techniques capable of operating at these high pulse energies will expand the use of these lasers in applications requiring shorter pulses. Towards this goal, we demonstrate the post-compression of 5.5 ps pulses with energy in the 0.1 J range by spectral broadening of self-collimated large area beams in air. In proof-of-principle experiments, pulses of 65 mJ energy from a cryogenically cooled Yb:YAG laser were compressed to 1.1 ps after 65 m propagation in a compact setup in which the beam was folded using flat mirrors. Further energy scaling was demonstrated by combining this spectral broadening technique with temporal pulse splitting and recombining. 120 mJ pulses were split into two pulses and coherently recombined with 85% efficiency after 50 m of propagation in air to yield 1.4 ps pulses.

High Energy Laser↗

Frequency-encoded photonic qubits for scalable quantum information processing

Among the objectives for large-scale quantum computation is the quantum interconnect: a device that uses photons to interface qubits that otherwise could not interact. However, the current approaches require photons indistinguishable in frequency—a major challenge for systems experiencing different local environments or of different physical compositions altogether. Here, we develop an entirely new platform that actually exploits such frequency mismatch for processing quantum information. Labeled “spectral linear optical quantum computation” (spectral LOQC), our protocol offers favorable linear scaling of optical resources and enjoys an unprecedented degree of parallelism, as an arbitrary Ν-qubit quantum gate may be performed in parallel on multiple Ν-qubit sets in the same linear optical device. Here, not only does spectral LOQC offer new potential for optical interconnects, but it also brings the ubiquitous technology of high-speed fiber optics to bear on photonic quantum information, making wavelength-configurable and robust optical quantum systems within reach.

97 MATHEMATICS AND COMPUTING↗

Pathways for Nucleation and Growth in Confined Spaces and at Interfaces

Mineral crystallization is central to myriad natural processes from the formation of snowflakes to stalagmites, but the molecular-scale mechanisms are often far more complex than models reflect. Feedbacks between the hydro-, bio-, and geo-spheres drive complex crystallization processes that challenge our ability to observe and quantify them, motivating an expansion of crystallization theories. Here, in this article, we discuss how the driving forces and timescales of nucleation are influenced by factors ranging from simple geometric confinement to distinct interfacial solution structures involving solvent organization, electrical double layers, and surface charging effects. Taken together, these ubiquitous natural phenomena can preserve metastable intermediates, drive precipitation of undersaturated phases, and modulate crystallization in time and space.

biosphere↗

Performance Analysis of Phase 2 Tracker Upgrade Ps Module before and after Irradiation

The Large Hadron Collider will undergo a luminosity upgrade targeting a peak instantaneous luminosity ranging from 5–7.5×1034 cm−2s−1. The ambitious goal of the High Luminosity LHC is to achieve a total of 3000–4000 fb−1 of proton-proton collisions at a center-of-mass energy of 13–14 TeV by 2029. To cope with such challenging environmental conditions, the outer tracker of the CMS experiment will be upgraded using closely spaced silicon sensors (pixels and strips) to provide tracking information at the Level-1 trigger. A PS-Module, composed of both a pixel and a strip sensor, was tested at the Fermilab Test-Beam Facility to evaluate its ability to provide accurate tracking information, Pt discrimination capabilities, and optimal performance at the irradiation levels expected after being exposed to the harsh conditions of the High Luminosity LHC. The results of the test and the comparison of the module performance before and after irradiation will be presented in this poster

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗