Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Phase-field simulations of fission gas bubble growth and interconnection in U-(Pu)-Zr nuclear fuel

Abstract The growth and interconnection of fission gas bubbles in the hotter central regions of U-(Pu)-Zr nuclear fuel has been simulated with a phase-field model. The Cahn-Hilliard equation was used to represent the two-phase microstructure, with a single defect species. The volume fraction of the bubble phase and surface area of the bubble-matrix interface were determined during growth and interconnection. Surface area increased rapidly during the initial stages of growth, then slowed and finally decreased as bubble interconnection began and coarsening acted to reduce surface area. The fraction of the bubbles vented to a simulation domain boundary, f V , was quantified as a measure of the microstructure’s interconnectivity and plotted as a function of porosity p . The defect species diffusivity was varied; although changes in diffusivity significantly affected the microstructure, the plots of f V vs. p did not change significantly. The percolation threshold p c was calculated to be approximately 0.26, depending on the assumed diffusivity and using an initial bubble number density based on experimental observations. This is slightly smaller than the percolation threshold for continuum percolation of overlapping 3D spheres. The simulation results were used to parameterize two different engineering-scale swelling models for U-(Pu)-Zr in the nuclear fuel performance code BISON.

Aagesen, Larry K. (ORCID:000000034936676X)↗
DOE OSTI2023

SoyFACE Fumigation Data Files

This data set is related to the SoyFACE experiments, which are open-air agricultural climate change experiments that have been conducted since 2001. The fumigation experiments take place at the SoyFACE farm and facility in Champaign County, Illinois during the growing season of each year, typically between June and October. - The "SoyFACE Plot Information 2001 to 2021" file contains information about each year of the SoyFACE experiments, including the fumigation treatment type (CO2, O3, or a combination treatment), the crop species, the plots (also referred to as 'rings' and labeled with numbers between 2 and 31) used in each experiment, important experiment dates, and the target concentration levels or 'setpoints' for CO2 and O3 in each experiment. - This data set includes files with minute readings of the fumigation levels ( "SoyFACE 1-Minute Fumigation Data Files" folder) from the SoyFACE experiments. The "Soyface 1-Minute Fumigation Data Files" folder contains sub-folders for each year of the experiments, each of which contains sub-folders for each ring used in that year's experiments. This data set also includes hourly data files for the fumigation experiments ( "SoyFACE Hourly Fumigation Data Files" folder) created from the 1-minute files, and hourly ambient/weather data files for each year of the experiments ( "Hourly Weather and Ambient Data Files" folder). The ambient CO2 and O3 data are collected at SoyFACE, and the weather data are collected from the SURFRAD and WARM weather stations located near the SoyFACE farm. - The "Fumigation Target Percentages" file shows how much of the time the CO2 and O3 fumigation levels are within a 10 or 20 percent margin of the target levels when the fumigation system is turned on. - The "Matlab Files" folder contains custom code (Aspray, E.K.) that was used to clean the "SoyFACE 1-Minute Fumigation Data" files and to generate the "SoyFACE Hourly Fumigation Data" and "Fumigation Target Percentages" files. Code information can be found in the "SoyFACE Hourly Fumigation Data Explanation" file. - Finally, the " * Explanation" files contain information about the column names, units of measurement, and other pertinent information for each data file. * NOTE: We have identified some files in the “SoyFACE 1-Minute Fumigation Data Files” folder in our SoyFACE data set submission that were not downloaded properly - the files were present in the folder, but the actual files were empty. V3 ensures that there are no longer any empty files in the data set.

agricultural↗
DOE OSTI2026

Data for "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid"

This repository contains source data for key plots presented in the manuscript "Plasmon-driven exciton formation in a non-equilibrium Fermi liquid." Experimental data that was analyzed in Igor Pro 8 are presented as the .pxp files used to generate individual sub-plots. Electronic spectral function calculations are provided as .txt files, in which consecutive rows refer to the meshgrid x coordinate, y coordinate, spectral function (and, where relevant, axis-projected local angular momentum). We additionally include the Wannier model and DFT-obtained bulk band structure on which the Wannier model was based. Files are named as the number of the figure in the manuscript to which they correspond, with additional details included where necessary. Details of file names: 2a_DOS_Lxz_Ek_KGM_40layer_xnum_800kpt_tot.txt: Density of states, xz-axis projected local orbital angular momentum, for 800 points along the K-Gamma-M path, for a 40-layer model. 2c_composite_y.pxp: ARPES (angle-resolved photoemission spectroscopy) spectra along the ky axis, including both a scan near the Fermi level and a scan at high kinetic energies. 2d_LCP_RCP_diff_Sect_20K.pxp: difference between ARPES constant energy cuts at T=20 K at E0 + 0.23 eV taken with left- and right-circularly polarized photons. The polarization-integrated intensity at the constant energy cut is also included. 2e_DOS_L45_E11pt79_m0pt25to0pt25_xnum_800kpt_tot.txt: Density of states, xz-projected local orbital angular momentum, and corresponding k-points in two dimensions from ab-initio electronic structure calculations for a constant-energy cut. 3a_[x]_[y]ps: ARPES cut under excitation at a fluence of x uJ/cm2, measured y ps after photoexcitation. Measurements were performed at 9 K. 3b_[x]: Energy distribution curves under excitation at a fluence x uJ/cm2 at selected delay times after photoexcitation. 4a_ImSigma_vs_temperature.pxp: Imaginary self energy (extracted from ARPES linewidths) at different energies above E0 for selected lattice temperatures. 4b_EELS_lowE.pxp: Electron energy loss spectrum over a low energy range 5b_diff_55m15.pxp: Difference between momentum-integrated Tr-ARPES traces at 55 uJ/cm2 and 15 uJ/cm2 photoexcitation. Time-dependent intensity at each energy level has been normalized to a maximum of 1 for each individual fluence prior to subtraction. 5d_invtau_at_EX_vs_fluence.pxp: decay rate at a specified energy EX for different excitation fluences, from single exponential fits. NOTE: Analyses based on the Wannier model presented here should cite both the associated Article and this dataset. For all other files in the repository, citing the dataset alone is sufficient.

Acharya, Rishi [University of Illinois] (ORCID:000↗
DOE OSTI2026

Two-stage formation-energy correction (NbZr, TaZr, VZr)

This bundle contains the scripts, the raw and corrected per-structure data, and the manuscript plots for the NbZr / TaZr / VZr BCC binary formation energies and the associated RMSDs. Why a two-stage correction is necessary: The "raw" formation energy of every relaxed VASP configuration is computed in the usual way, FE_raw(c) = E_alloy(c) - sum_i x_i * E_pure_i , where E_pure_i are the per-atom total energies of the pure-element reference structures (Nb, Ta, V, Zr in the same BCC supercell, with identical INCAR / KPOINTS / PAW choices). With perfectly consistent reference runs the raw FE should vanish at the two pure-element endpoints (x = 0 and x = 1) by construction. In practice this does not hold for two reasons that are present in our dataset: 1. Reference-energy inconsistency (composition-dependent bias). Even with identical input parameters, the pure-element runs (stored in `corrected_DFT_pure_element_runs/`) differ slightly from the values that would be implied by the alloy runs at near-pure compositions (a few meV/atom). This bias is approximately linear in concentration, because the residual error in E_pure_Nb (or E_pure_Ta / E_pure_V) propagates into FE_raw(c) as (1 - x) * dE_pure_1, and the corresponding error in E_pure_Zr propagates as x * dE_pure_2. Left uncorrected, this produces a non-physical "tilt" of FE_raw(x) and shifts the entire FE-vs-x cloud away from zero at the endpoints. 2. Endpoint anchoring against the audited true endpoints. The strict endpoint values (FE_x0_meVatom, FE_x1_meVatom in `corrected_fe_strict_endpoints_20260518/strict_endpoint_check_20260518.csv`) were re-derived from an independent cross-check of the pure-element runs. After stage 1 removes the linear bias, the near-pure compositions in the alloy dataset still extrapolate to values that differ slightly from these audited endpoints — because stage 1 is fit from a few near-end alloy bins, not from the audited pure-element references themselves. The README.txt file discusses how these issues are addressed by the two-stage correction, and describes folder layout, pipeline summary, and how to re-run.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Visualizing spatiotemporal pulse propagation: first-order spatiotemporal couplings in laser pulses

Even though a general theory of first-order spatiotemporal couplings exists in the literature, it is often difficult to visualize how these distortions affect laser pulses. In particular, it is difficult to show the spatiotemporal phase of pulses in a meaningful way. We propose a general solution to plotting the electric fields of pulses in three-dimensional space that intuitively shows the effects of spatiotemporal phases. The temporal phase information is color-coded using spectrograms and color response functions, and the beam is propagated to show the spatial phase evolution. In using this plotting technique, we generate two- and three-dimensional images and movies that show the effects of spatiotemporal couplings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Diffraction properties of multilayer Laue lenses with an aperture of 102 µm and WSi 2 /Al bilayers

We report on the characterization of a multilayer Laue lens (MLL) with large acceptance, made of a novel WSi 2 /Al bilayer system. Fabrication of multilayers with large deposition thickness is required to obtain MLL structures with sufficient apertures capable of accepting the full lateral coherence length of x-rays at typical nanofocusing beamlines. To date, the total deposition thickness has been limited by stress-buildup in the multilayer. We were able to grow WSi2/Al with low grown-in stress, and asses the degree of stress reduction. X-ray diffraction experiments were conducted at beamline 1-BM at the Advanced Photon Source. We used monochromatic x-rays with a photon energy of 12 keV and a bandwidth of $ΔE/\atop {E}$ = 5.4 • 10 -4 . The MLL was grown with parallel layer interfaces, and was designed to have a large focal length of 9.6 mm. The mounted lens was 2.7 mm in width. We found and quantified kinks and bending of sections of the MLL. Sections with bending were found to partly have a systematic progression in the interface angles. We observed kinking in some, but not all, areas. The measurements are compared with dynamic diffraction calculations made with Coupled Wave Theory. Data are plotted showing the diffraction efficiency as a function of the external tilting angle of the entire mounted lens. This way of plotting the data was found to provide an overview into the diffraction properties of the whole lens, and enabled the following layer tilt analyses.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2018

Utah FORGE: GIS Well Temperature Data

This is a GIS point feature shapefile representing wells, and their temperatures, that are located in the general Utah FORGE area near Milford, Utah. There are also fields that represent interpolated temperature values at depths of 200 m, 1000 m, 2000 m, 3000 m, and 4000 m. in degrees Fahrenheit. The temperature values at specific depths as mentioned above were derived as follows. In cases where the well reached a given depth (200 m and 1, 2, 3, or 4 km), the temperature is the measured temperature. For the shallower wells (and at deeper depths in the wells reaching one or more of the target depths), temperatures were extrapolated from the temperature-depth profiles that appeared to have stable (re-equilibrated after drilling) and linear profiles within the conductive regime (i.e. below the water table or other convective influences such as shallow hydrothermal outflow from the Roosevelt Hydrothermal System). Measured temperatures/gradients from deeper wells (when available and reasonably close to a given well) were used to help constrain the extrapolation to greater depths. Most of the field names in the attribute table are intuitive, however HF = heat flow, intercept = the temperature at the surface (x-axis of the temperature-depth plots) based on the linear segment of the plot that was used to extrapolate the temperature profiles to greater depths, and depth_m is the total well depth. This information is also present in the shapefile metadata.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Mass of Water Turbine Current Energy Converter CFD Results

The CFD (computational fluid dynamics) results for the Mass of Water Turbine (MOWT) current energy converter from MWNW Consulting (formerly Ecosse IP). Each case is self-contained in its own tar.gz archive file. The archive contains the scripts required to perform a full simulation using OpenFOAM v1906. The scripts to process the output and plot forces are included in "Plotting Scripts", and all computational meshes generated are included in "Computational Grids".

16 TIDAL AND WAVE POWER↗
DOE OSTI2018

FACE-MDS Phase 2: Data from Six US-Located Elevated CO2 Experiments

This dataset contains measured ecosystem data from four Free Air CO2 Enrichment (FACE) experiments–Duke, Oak Ridge (ORNL), and Rhinelander -- and one Open Top Chamber (OTC) experiment -- Kennedy Space Center (KSCO). The sites were located in the United States and contain data from 1996-2009. These sites were the study sites of the FACE Model Data Synthesis (FACE-MDS) project phase 2. The file naming convention can be found in the file 'facemds-file-table-sitedata.xml' and information about variable naming convention can be found in the file 'facemds-standard-name-table-modvars.xml'. We followed the ALMA v3 convention for meteorological variables and developed a hierarchical naming scheme for ecosystem variables. Additional info can be found in the protocols in the accompanying meteorological dataset (Walker et al. 2018: doi:10.15485/1480328). We replaced the original naming convention mentioned in the protocol with the one described in 'facemds-standard-name-table-modvars.xml'. The outputs of the FACE-MDS phase 2 are in Walker et al (2018: doi:10.15485/1480327). The dataset contains 18 data files that are available in comma-separate (*.csv), and 18 R Data Serialization (*.rds) format. 2 XML (*.xml) companion files and additional metadata are provided: 2 data dictionaries and a file-level metadata file in comma-separate (.csv) format and a user guide in PDF (*.pdf) format. This dataset was updated on 2019-06-28 to fix daily files at Duke and ORNL were incorrectly labelled and were standard error files instead of plot level data. Now corrected and all three (plot, mean, standard error) daily data files for both sites have been added. This dataset was updated on 2026-06-08 to add a user guide, data dictionary file, and a file-level metadata file. DUKE_ax_v2.csv was added to match the no data value format of other files in this dataset. DUKE_ax.csv is maintained as a data file. No previously released data values were changed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Leaf mass per area and leaf water content measurements from field survey in association with NEON AOP survey, East River, CO 2018

Leaf area, wet, and dry weights for leaf samples from sites where field sampling was conducted during the 2018 National Ecological Observatory Network (NEON) Airborne Observation Platform (AOP) imaging spectroscopy and lidar surveys in Gunnison County, Colorado. The sampling sites were located across East River, Washington Gulch, Slate River, and Coal Creek watersheds and contained a mixture of meadow, shrub, and tree sampling sites. This data package contains the leaf area and wet and dry weights for leaves from tree and shrub sampling sites, as well as samples for meadow species present within a given sampling area. Associated data packages contain species composition information at the plot level (DOI: 10.15485/1618130), as well as additional biogeochemical, microbial, and geophysical data as they become available. For full documentation, please see associated reference.This package contains zipped folders of all scans that were used for area calculations for both sampling sites (tree/shrub, site_scans.zip) as well as representative samples from a daily sampling area of meadow species that were found in the 1 m plots (meadow_area_scans.zip). It also contains the macro code that was used in ImageJ for processing of the area calculations. Finally, it includes excel files with the area (cm2), wet weight (g), dry weight (g), leaf mass per area (LMA, g/m2), and leaf water content (%) for each set of scans.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Leaf-scale carbon assimilation simulated by the multi-assumption architecture & testbed for process sensitivity analysis

Raw and processed output from the Multi-Assumption Architecture & Testbed (MAAT, https://github.com/walkeranthonyp/MAAT, tag: v1.2.1_walker2020; Walker et al., 2018). The dataset contains leaf-scale carbon assimilation data from three MAAT simulations and their post-processing and plotting scripts. Simulation 1, labelled "FvC_4proc_proc," is a four-process, process sensitivity analysis (Dai et al., 2017) of carbon assimilation based on the Farquhar et al. (1980) photosynthesis model, and its variant proposed by Collatz et al. (1991). Simulation 2, labelled "FvC_4proc_salt," is a 14 parameter sensitivity analysis (Saltelli et al., 2010) of carbon assimilation based on the Farquhar and Collatz photosynthesis models. Simulation 3, labelled "FvC," is a factorial combination of the alternative process representations and parameter values presented in those original papers across a factorial combination of incident photosynthetically active radiation (50-2000 µmol m-2 s-1, in increments of 50) and atmospheric CO2 concentration (50-1500 µmol m-2 s-1, in increments of 50). Additional scripts/functions for post-processing and plotting are part of the MAAT repository. These data were generated to evaluate and compare the Farquhar and Collatz models of leaf-scale photosynthesis across a range of CO2 and incident light conditions. Analysis of results can be found in Walker et al. (2020). This dataset is comprised of R scripts to process data and produce figures; .RDS files, a binary format specific to R and read with the 'readRDS' function, to store raw MAAT output; R and bash scripts (.bs) that help to run a MAAT simulation, .XML files that are output from MAAT describing a run, and .csv files which contain the calculated sensitivity indexes published in Walker et al. (2020).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Unsaturated and Saturated Hydraulic Parameters of Soils at the East River Watershed, Colorado Calculated using the Pedotransfer Function Method.

The purpose of the data package is to present the results of calculations of the following unsaturated-saturated hydraulic parameters of soils of the East River Watershed, Colorado: fully saturated water content (Qs), residual saturation (Qr), van genuchten parameters alpha and n, field capacity (FC), and saturated hydraulic conductivity (Ks). Calculations were conducted for the following soil texture types: sandy_loam, loam, silty_clay_loam, clay_loam, silt loam; the particle size distribution included the percentage of sand, silt, clay, and the bulk density (BD) of soils. Calculations were conducted for the following areas- Lower_Subalpine (6 samples),- Lower_Montane_lower_hillslope (7 samples),- Floodplain_at_base_of_lower_montane_hillslope, (11 samples),- PLM-0 (10 samples),- PLM-1 (10 samples), and - PLM-3 (13 samples)Calculations were conducted using the Pedotransfer Function Method developed by Tóth et al. (2014) with the application of the code ”euptf” in Rstudio. The data are being summarized in the Excel file ”Unsaturated_Saturated_Hydraulic_Parameters_PTF_calculated_EASt_EIver.xls" including two worksheets:“full_data_EAST_RIVER” which includes (a) the input data used for calculations, the soil texture triangle, and the plots of the water retention curves and unsaturated hydraulic conductivity for several types of soil texture, and (b) the summary table with the averaged parameters for each area. The the texture triangle was plotted using the Rstudio "soiltexture." Microsoft Excel software is required to open the Excel file. The metadata and a list of references to the Rstudio libraries used for calculations and data visualization are giving in the Word Readme file.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Data for “Fast-decaying plant litter enhances soil carbon in temperate forests, but not through microbial physiological traits”

This data package contains data and code used in the paper “Fast-decaying plant litter enhances soil carbon in temperate forests, but not through microbial physiological traits”. This paper details results from two studies: 1) a laboratory leaf litter incubation experiment (lab experiment) and 2) a multi-site observational field study (field study). Both studies were designed to test the relationships among litter quality, microbial physiological traits, and mineral-associated soil carbon (C). In the lab experiment, we incubated 16 temperate tree litters of differing chemical quality with isotopically distinct soil, measuring microbial physiological traits and the flow of litter-derived C into the mineral-associated soil C pool. In the field study, we sampled soils (0-5 cm) across six eastern US temperate forests, measuring microbial physiological traits, soil abiotic properties, and leaf litter chemistry. The analysis data are provided in two .csv files corresponding to either the lab experiment or field study. Both files contain data on litter chemistry, microbial physiological traits (growth and turnover rates, and carbon use efficiency [CUE]), and the mineral-associated soil C pool. The lab experiment dataset additionally contains litter-derived versus soil-derived soil C, respiration, and litter decomposition parameters. The field study dataset additionally contains site-level climatic information, ectomycorrhizal dominance of plots, and plot-level soil properties. Also provided is the R code and output reproducing the results in the related publication. Analyses were originally performed using R version 3.6.1 using the package "lavaan" and the packages listed on lines 5-7 in the file "data.R".

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Surface soil temperature and water content from warming experiment located at the Rocky Mountain Biological Laboratory, Colorado, 2015 to 2019

This data package consists of soil temperature and soil water content sensor data from the warming experiment near the Rocky Mountain Biological Laboratory. Data range is from summer 2015 to summer 2019, when the warming manipulation was terminated. The location of the warming experiment is in the upper montane life zone and consists of meadow vegetation with a mixture of sagebrush (Artemisia tridentata), forb species (Erigeron speciosus, Helianthella quinquenervis, Lathyrus lanszwertii), and graminoid species (Festuca thurberi, Carex spps). Early studies showed that the heating treatment led to earlier snowmelt as well as warmer and drier surface soils, and changes in the functional composition of aboveground biomass favoring sagebrush over forb species (Harte and Shaw, 1995). These changes were mainly observed in the upper, naturally drier zone for the experimental plots. More recent observations of aboveground biomass, soil carbon, and microbial composition require concurrent information about the abiotic environment for interpretation and extrapolation to process-based models. This data package provides the plot- and zone-level abiotic context for the final years of the experiment and consists of csv files with hourly soil temperature (WM_ST.csv) and soil water content (WM_SWC.csv).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Sensor-based phenology from snowmelt experiment gradient, East River, Colorado, 2017 to 2020

The timing of snowmelt is a critical cue for the initiation of growth in mountain meadow ecosystems and can also impact the duration and magnitude of plant production. High frequency observations of species-level phenology are time consuming and require a high degree of expertise, and publicly available remote sensing products lack the necessary temporal resolution to assess fine-scale growing season dynamics. Near-surface sensing methods provide a middle ground with high temporal frequency and tractable spatial scales (from sub-meter to hillslope scale). This data package includes csv files of Normalized Difference Vegetation Index (NDVI) timeseries (SM_NDVI_dailymax.csv) and phenological thresholds (SM_NDVI_summary.csv) for sub-plots (1m2) and Green Chromatic Coordinate (GCC) phenological thresholds (SM_GCC_summary.csv) at the plot scale (10m x 14m). Location IDs associated with this data package are: ER-LM, WG-UM, WG-LS, ER-US, and XX-AL. Related data packages include: “Microclimate observations associated with snowmelt experiment gradient sites, East River, Colorado, 2017 to 2020” and “Colorado Elevation Gradient Snowmelt Manipulation Plant Phenology 2017-2018”.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

16S and ITS Amplicon Sequencing Fastq files and metadata from PARCHED Panama Tropical Forest soils, 2019-2020,

Model projections predict tropical forests will experience longer periods of drought and more intense precipitation cycles under a changing climate. Such transitions have implications for structure-function relationships within microbial communities. We examine how chronic drying might reshape prokaryotic and fungal communities across four lowland forests in Panama with a wide variation in mean annual precipitation and soil fertility. Four sites were established across a 1000 mm span in mean annual precipitation (2335 to 3300 mm). We expected microbial communities at sites with lower MAP to be less sensitive to chronic drying than sites with higher MAP; while fungal communities to be more resistant to disturbance than prokaryotes. At each location, partial throughfall exclusion structures were established over 10 x 10 m plots to reduce direct precipitation input. Raw demultiplexed sequences (bacteria, archaea, fungal) from soil samples taken from PARCHED Panama Tropical Forest throughfall exclusion experiments. Files that contain 16S are sequences from prokaryotes, ITS indicates sequences from fungi. Compressed fastq files are contained in Field_PARCHED_ITS_fastq_2020.zip, Field_PARCHED_ITS_fastq_2019.zip, Field_PARCHED_16S_fastq_2020.zip, Field_PARCHED_16S_fastq_2019.zip.There are four sites across the isthmus of Panama, each with 4 control and 4 exclusion plots. Throughfall exclusion shelters were built to intercept 50% of throughfall precipitation that hits the soil. Samples were taken on May 2019 and Jan 2020 from 0-10 cm and 10-20 cm depth approximately 9 and 18 months after shelter installation. Metadata and sample IDs for fastq files for 2019 sampling are within Field_PARCHED_Metadata_2019_ITS.csv and Field_PARCHED_Metadata_2019_16S.csv. The metadata for both 16S and ITS fastq files for January 2020 is included in Field_PARCHED_Metadata_2020.csv. No data processing or QA/QC was done on the raw data. Data processing example provided in R notebook file.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

LiDAR-based aboveground biomass changes data of tropical montane forest in Borneo

Anthropogenic activities are increasingly impacting the carbon storage of tropical montane forests. We employed airborne LiDAR data to estimate the aboveground biomass (AGB) changes at high resolution in a human-modified tropical montane forest in northern Borneo. The data package consists of LiDAR-based AGB changes at 1m resolution in GeoTIFF format, a table of field and estimated AGB changes at plot level and a shape file of the plots’ coordinates. The raster data (GeoTIFF) at 1 m resolution covers two study sites (site 1: 2.67 km x 8 km; site 2: 2 km x 8 km). The GeoTIFF and shape files can be read using any GIS or image processing software. The dataset can be utilized to deepen our understanding of the carbon storage of tropical montane forests, establish reference values for Southeast Asian tropical montane forests, guide forest resource managers on rehabilitation strategies and further research on the impacts of anthropogenic land use activities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

WHONDRS River Corridor Sediment and Water Geochemistry and In Situ Sensor Data from Machine-Learning-Informed Sites across the Contiguous United States (v6)

This dataset supports a broader study examining hyporheic zone respiration rates to improve predictive models at a contiguous United States (CONUS) scale. The CONUS-Scale Model-Sample Study (CM) was designed following ICON (integrated, coordinated, open, and networked) principles to facilitate a model-experiment (ModEx) iteration approach, leveraging crowdsourced sampling across the CONUS. New machine learning models were created every month to guide sampling locations. Data from the resulting samples were used to test and rebuild the machine learning models for the next round of sampling guidance. Sampling began in April 2022 and ended in October 2023. In addition to the widely distributed CONUS sites, a more spatially focused sampling occurred in the Yakima River Basin, WA in summer 2022. Data from this more spatially intensive sampling occurred under the label “Second Spatial Study (SSS)” and were also included in the machine learning models. Other data types collected from SSS that were not part of CM were published in a separate data package (https://data.ess-dive.lbl.gov/view/doi:10.15485/1969566). This data package was originally published in February 2023. It was updated in June 2023 (v2; new and modified files); December 2023 (v3; new and modified files); June 2024 (v4; new and modified files); April 2024 (v5; new and modified files); and September 2025 (v6; modified files). See the change history section in the readme for more details. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. This dataset is comprised of two folders of field photos and videos, one folder of raw Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) data and one main data folder containing (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) readme; (5) international generic sample number (IGSN) mapping file; (6) field protocols; (7) a subfolder with sample data; and (8) a subfolder with sensor data. The sample data subfolder contains (1) surface water and sediment dissolved organic carbon (DOC, measured as non-purgeable organic carbon, NPOC) data and averages; (2) surface water and sediment total nitrogen data and averages; (3) surface water major cations and anions and averages; (4) sediment grain size data; (5) sediment iron (II) data and averages; (6) wet sediment mass, dry sediment mass, water mass, and wet sediment volume in incubation and sediment ICR vials; (7) sediment incubation respiration rate data and averages; (8) normalized respiration rate data and averages; (9) methods codes; (10) sediment specific surface area; (11) sediment percent carbon and nitrogen; (12) sediment gravimetric moisture and averages; (15) sediment X-ray diffraction (XRD) data; (16) sediment adenosine triphosphate (ATP) and averages; (17) a subfolder with sediment incubation respiration data, scripts, and plots; (18) surface water and sediment FTICR methods; and (19) a subfolder of 9.4 Tesla (9.4T) FTICR-MS data. This folder contains five subfolders, one containing the sediment .xml data files, one containing the water .xml files, one containing the sediment CoreMS output files, one containing the water CoreMS output files, and the other containing instructions and scripts for processing the files in CoreMS (https://github.com/EMSL-Computing/CoreMS).The sensor data subfolder contains (1) a subfolder with miniDOT dissolved oxygen and temperature data and plots; (2) miniDOT dissolved oxygen and temperature summary data; and (3) miniDOT installation methods. All files are .csv, .pdf, .R, .xml, .d, .html, .Rmd, .py, .cal, .json, .jpg, .jpeg, .png, .mov, or .mp4. CORRECTION: Carbon and nitrogen content are reported as percentages. The current column headers "01395_C_percent_per_mg" and "01397_N_percent_per_mg" are incorrect. These should read "01395_C_percent" and "01397_N_percent" and will be corrected in the next version of this data package. We thank the United States Forest Service, Washington Department of Fish and Wildlife, Washington Department of Natural Resources, Cowiche Canyon Conservatory, Washington State Parks and Recreation Commission (Scientific Research Permit #210901), and the Confederated Tribes and Bands of the Yakama Nation for access to field locations where the samples labeled “SSS” were collected. We also thank the Yakama Nation Tribal Council and Yakama Nation Fisheries for working with us to facilitate sample collection and optimization of data usage according to their values and worldview. WHONDRS consortium members were asked to provide any acknowledgments for the collection of samples labeled “CM” and the following is a list of acknowledgments that were submitted with their corresponding Site IDs: (MART) Research activities were conducted in part on the Wind River Experimental Forest within the Gifford Pinchot National Forest; (MP- 100379) Philadelphia is part of Lenapehoking, the ancestral homelands of the Lenape peoples; (MP-102398) Land surveyed is the ancestral homelands of the Nookhose'iinenno (Arapaho), Tsis tsis'tas (Cheyenne), and Nuuchu (Ute); (MP-100749 and MP- 100747) Georgia Coastal Ecosystem LTER, OCE-1832178; (SP-70 and SP-72) Eastern Shoshone, Shoshone-Bannock; (MP- 102944) Funded by Oregon Watershed Enhancement Board. On the traditional lands of the Confederated Tribes of the Siletz, Confederated Tribes of the Grand Rhonde, and the Clatsop-Nehalem Confederated Tribe; (MP- 100607) Holiday Creek is located on the traditional territory of the Monacan Indian Nation; (SP-45) Lafayette Blue Springs State Park; (MP-102420) NSF DEB-2016749; (MP-100019) New Hampshire Agriculture Experiment Station; (SP-35) Rayonier (land owner; https://www.rayonier.com/); (MP- 101276) US Department of Energy, Office of Science, Biological and Environmental Research, Subsurface Biogeochemical Research, Watershed Dynamics and Evolution SFA at ORNL; (MP- 103224) Watershed Dynamics and Evolution SFA at ORNL; (MP- 101584) Traditional lands of the Oceti Sakowin (Dakota, Lakota, Nakoda) and Anishinaabe Peoples.

54 ENVIRONMENTAL SCIENCES↗