Search NASA⌕ Search

SEARCH · Search NASA

Results for “Polymer Networks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Correlation between the fine structure of spin-coated PEDOT:PSS and the photovoltaic performance of organic/crystalline-silicon heterojunction solar cells

We investigated the relationship between the fine structure of spin-coated conductive polymer poly(3,4-ethylenedioxythiphene):poly(styrene sulfonate) (PEDOT:PSS) films and the photovoltaic performance of PEDOT:PSS crystalline-Si (PEDOT:PSS/c-Si) heterojunction solar cells. Real-time spectroscopic ellipsometry revealed that there were two different time constants for the formation of the PEDOT:PSS network. Upon removal of the polar solvent, the PEDOT:PSS film became optically anisotropic, indicating a conformational change in the PEDOT and PSS chain. Polarized Fourier transform infrared attenuated total reflection absorption spectroscopy and Raman spectroscopy measurements also indicated that thermal annealing promoted an in-plane π-conjugated C{sub α} = C{sub β} configuration attributed to a thiophene ring in PEDOT and an out-of-plane configuration of -SO{sub 3} groups in the PSS chain with increasing composition ratio of oxidized (benzoid) to neutral (quinoid) PEDOT, I{sub qui}/I{sub ben}. The highest power conversion efficiency for the spin-coated PEDOT:PSS/c-Si heterojunction solar cells was 13.3% for I{sub qui}/I{sub ben} = 9–10 without employing any light harvesting methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solution-phase p-type doping of highly enriched semiconducting single-walled carbon nanotubes for thermoelectric thin films

Single-walled carbon nanotubes (SWCNTs) are attractive materials for next-generation energy-harvesting technologies, including thermoelectric generators, due to their tunable opto-electronic properties and high charge carrier mobilities. Controlling the Fermi level within these unique 1D nanomaterials is often afforded by charge transfer interactions between SWCNTs and electron or hole accepting species. Conventional methods to dope SWCNT networks typically involve the diffusion of molecular redox dopant species into solid-state thin films, but solution-phase doping could potentially provide routes and/or benefits for charge carrier transport, scalability, and stability. Here, we develop a methodology for solution-phase doping of polymer-wrapped, highly enriched semiconducting SWCNTs using a p-type charge transfer dopant, F4TCNQ. This allows doped SWCNT inks to be cast into thin films without the need for additional post-deposition doping treatments. We demonstrate that the introduction of the dopant at varying stages of the SWCNT dispersion process impacts the ultimate thermoelectric performance and observe that the dopant alters the polymer selectivity for semiconducting vs metallic SWCNTs. In contrast to dense semiconducting polymer films, where solution-phase doping typically leads to disrupted morphologies and poorer TE performance than solid-state doping, thin films of solution-doped s-SWCNTs perform similarly to their solid-state doped counterparts. Interestingly, our results also suggest that solution-phase F4TCNQ doping leads to fully ionized and dimerized F4TCNQ anions in solid-state films that are not observed in films doped with F4TCNQ after deposition. Our results provide a framework for the application of solution-phase doping to a broad array of high-performance SWCNT-based thermoelectric materials and devices that may require high-throughput deposition techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of a Testing Protocol for C7 Carbon Fiber Core Conductors

To avoid the high costs and environmental and regulatory challenges of building new lines to meet the power demand, utilities are searching for ways to increase power transmission capacity on existing lines and thereby. This could involve upgrading the network lines with conductors capable of transmitting greater capacity. In recent years, conductor manufacturers have begun producing new conductors that can operate at higher temperatures without violating present electrical clearances to ground and other objects. One new conductor technology is a carbon composite core with PPS polymer matrix and PEEK capping layer composite conductor, manufactured by Southwire Inc. The conductor uses new materials, which have not previously been used for overhead lines. The project made an initial characterization of the composite core to define the material used in the manufacture of the composite. Several analytical procedures were then conducted to evaluate the physical-chemical impacts on the composite as a result of thermal exposure. These procedures included thermogravimetry, dynamic mechanical analysis, thermal mechanical analyses, and optical microscopy. Mechanical three-point flexural tests, tensile tests, creep tests, and dynamic vibration tests were then performed to estimate the potential degradation after thermal aging. The report provides the basis to develop a qualification testing protocol for the carbon composite core at targeted service environments. The work covers the design of the qualification testing protocol and the follow-on validation testing to support the proposed methods. The research includes the following approaches: initial characterization, performance of thermal aging, characterization of the aged material, comparison of aged properties or characteristics to the original, and concluding by the findings through the developed qualification procedures.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Synthesis, crystal structures and characterization of four coordination polymers based on 5-amino-2,4,6-triiodoisophthalic acid

One homochiral 1D coordination polymer [Cu(ATIBDC)(2,2'-bipy)].3H{sub 2}O.CH{sub 3}OH (1) and three achiral 1D coordination polymers: [Cd(ATIBDC)(2,2'-bipy)(H{sub 2}O)].3H{sub 2}O (2), [Cd(ATIBDC)(phen)(H{sub 2}O)].4H{sub 2}O (3), and [Mn(ATIBDC)(phen){sub 2}].5H{sub 2}O (4) have been synthesized and characterized (H{sub 2}ATIBDC=5-amino-2,4,6-triiodoisophthalic acid, 2,2'-bipy=2,2'-bipyridine, and phen=1,10-phenanthroline). Extended high dimensional network architectures are further constructed with the help of weak secondary interactions, such as hydrogen bonding, aromatic stacking, and halogen bonding (C-I..{pi} and C-I...N/O). Complex 1 crystallizes in the monoclinic system with chiral space group P2(1) and exhibits a right-handed 2{sub 1} helical chain structure. The homochirality of 1 was confirmed by CD spectrum. Interestingly, two new configurations of decameric water cluster are found in 3 and 4. The acyclic tetrameric cluster (H{sub 2}O){sub 3}(CH{sub 3}OH) in 1 and (H{sub 2}O){sub 4} in 2 array into highly ordered helical infinite chains. Thermal stabilities of all the complexes have been studied. Solid state fluorescent properties of the Cd(II) complexes have been explored. -- Graphical abstract: The synthesis, crystal structures and characterization of one 1D homochiral coordination polymer and three achiral 1D coordination polymers with 5-amino-2,4,6-triiodoisophthalic acid (H{sub 2}ATIBDC) are reported. Display Omitted highlights: > Four 1D coordination polymers with 5-amino-2,4,6-triiodoisophthalate are reported. > The halogen bonds play important roles in the supramolecular assembly. > Solid state fluorescent properties of the Cd(II) complexes are explored.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Copper(II)-lanthanide(III) coordination polymers constructed from pyridine-2,5-dicarboxylic acid: Preparation, crystal structure and photoluminescence

A series of 3d-4f heterometallic coordination polymers, formulated as {l_brace} [Cu{sub 3}Ln{sub 2}(pydc){sub 6}(H{sub 2}O){sub 12}]{center_dot}4H{sub 2}O{r_brace} {sub n} [Ln=Tb (1), Eu (2), Dy (3), Ho (4), Lu (5)], {l_brace} [CuNd{sub 2}(pydc){sub 4}(H{sub 2}O){sub 3}]{center_dot}H{sub 2}O{r_brace} {sub n} (6) and {l_brace} [Cu{sub 3}Pr{sub 2}(pydc){sub 6}(H{sub 2}O){sub 13}]{center_dot}4H{sub 2}O{r_brace} {sub n} (7) (where H{sub 2}pydc=pyridine-2,5-dicarboxylic acid), have been hydrothermally prepared by reactions of H{sub 2}pydc ligand with lanthanide ions in the presence of Cu(II) ion. X-ray crystal structure analysis reveals that these compounds exhibit rich structural chemistry. 1-5 are isomorphous and present a two-dimensional network constructed from Ln{sub 2}Cu{sub 2}L{sub 2}(H{sub 2}O){sub 2} SBU rings and CuL{sub 2}(H{sub 2}O) building blocks. In 6, two-dimensional ladder-like layers based on Nd(III) belts and CuL{sub 2}O{sub 2} units are assembled by H{sub 2}pydc ligands into a three-dimensional open framework. Polymer 7 displays a two-dimensional wave-like layer structure containing two distinct ring units, in which a new coordination mode of the pydc{sup 2-} ligand is observed. The results indicate that the coordination flexibility of the pydc{sup 2-} ligand and lanthanide contraction effect play cooperative roles in the formation of coordination polymers with different polymeric architectures. Compounds 1-2 exhibit intense green and red luminescence emission characteristics of Tb(III) and Eu(III), respectively. Furthermore, elemental analyses (EA), infrared spectra (IR) and thermogravimetric analyses (TGA) of these compounds were also studied. - Graphical abstract: Seven 3d-4f heterometallic coordination polymers were synthesized by reactions of H{sub 2}pydc with lanthanide metal ions in the presence of Cu{sup 2+}, the effects of Cu{sup 2+} on the structures and photoluminescent properties of Ln-pydc{sup 2-} systems were investigated. Highlights: Black-Right-Pointing-Pointer Seven 3d-4f heterometallic compounds have been prepared and characterized. Black-Right-Pointing-Pointer 1-5 and 7 are constructed from Ln{sub 2}Cu{sub 2}L{sub 2}(H{sub 2}O){sub 2} rings and CuL{sub 2}(H{sub 2}O) building blocks. Black-Right-Pointing-Pointer One new coordination mode of the pydc{sup 2-} ligand is first observed. Black-Right-Pointing-Pointer 1-2 exhibit intense characteristic luminescence emission spectra of lanthanide ions.

36 MATERIALS SCIENCE↗

A Two-Dimensional Coordination Polymer Based on 1,1':4',1''-Terphenyl-2',4,4'',5'-tetracarboxylate

The coordination polymer, [MnL{sub 0.5}(H{sub 2}O)(phen)]{sub n} (H{sub 4}L = 1,1':4',1''-terphenyl-2',4,4'',5'-tetracarboxylic acid, phen = 1,10-phenanthroline), has been solvothermal synthesized and structurally characterized by single-crystal X-ray diffraction. Complex crystallizes in triclinic sp. gr.P1̄ with Z = 2. Two carboxylate oxygen atoms in the central phenyl rings from two μu{sub 6{sup −}}L{sup 4–} ligands doubly-bridge two Mn(II) ions to form the dinuclear Mn{sub 2}(O{sub COO{sup −}}){sub 2} unit. Each dinuclear Mn{sub 2}(O{sub COO{sup −}}){sub 2} unit links four L{sup 4–} ligands and each L{sup 4–}ligand bridges four dinuclear Mn{sub 2}(O{sub COO{sup −}}){sub 2} units to generate a 2D coordination network, which can be rationalized as a binodal (4,4) topological network by considering the dinuclear Mn{sub 2}(O{sub COO{sup −}}){sub 2} units and L{sup 4–} ligands as 4-connected nodes.

36 MATERIALS SCIENCE↗

Perpendicular crossing chains enable high mobility in a noncrystalline conjugated polymer

The nature of interchain π-system contacts, and their relationship to hole transport, are elucidated for the high-mobility, noncrystalline conjugated polymer C16-IDTBT by the application of scanning tunneling microscopy, molecular dynamics, and quantum chemical calculations. The microstructure is shown to favor an unusual packing motif in which paired chains cross-over one another at near-perpendicular angles. By linking to mesoscale microstructural features, revealed by coarse-grained molecular dynamics and previous studies, and performing simulations of charge transport, it is demonstrated that the high mobility of C16-IDTBT can be explained by the promotion of a highly interconnected transport network, stemming from the adoption of perpendicular contacts at the nanoscale, in combination with fast intrachain transport.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two new coordination polymers constructed by naphthalene-1,4-dicarboxylic acid and 2,4-diamino-6-methyl-triazine

Two new transition metal coordination complexes, ([MnO(nda)](H{sub 2}dmt)(H{sub 2}O)){sub n} (1), [Ag{sub 5}(nda){sub 2.5}(dmt)]{sub n} (2), (H{sub 2}nda=naphthalene-1,4-dicarboxylic acid, dmt=2,4-diamine-6-methyl-1,3,5-triazine) have been hydrothermally synthesized by the reactions of H{sub 2}nda and dmt with the homologous MnCl{sub 2}·4H{sub 2}O and AgNO{sub 3}, respectively, and characterized by single-crystal X-ray diffraction, IR spectra, elemental analysis, thermogravimetric analysis (TGA). The compound 1 exhibits a 3D network comprising 1D metal chain (MnO(CO{sub 2}){sub 2}){sub n} connected by the ligand nda{sup 2−}, featuring a four-connected uninodal diamond -like topology. In compound 2, it is firstly observed that decanuclear silver units as secondary building units to construct 3D network by the ligands dmt and nda{sup 2−}, with a rare 2-nodal (3,8)-connected tfz-d topology ((4{sup 3}){sub 2}(4{sup 6}.6{sup 18}.8{sup 4})). The interactions within each Mn(II)—Mn(II) pair of compound 1 are antiferromagnetic (g=2.07, J=−1.42(1) cm{sup −1}, zj′=−0.73(2) cm{sup −1}). In addition, compound 2 exhibits photoluminescent property at about 472 nm (λ{sub ex}=394 nm). - Graphical abstract: Two new transition metal coordination complexes 1–2 have been hydrothermally synthesized and characterized by single-crystal X-ray diffraction, IR spectra, elemental analysis thermogravimetric analysis (TGA). Highlights: • The compound 1 exhibits a 3D network with four-connected uninodal diamond-like topology. • The first 3D network of 2 with a rare tfz-d topology consists of decanuclear silver clusters as secondary building units. • The magnetic measurement indicates the compound 1 shows antiferromagnetic interactions. • The photoluminescent property of 2 has been measured.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High modulus biocomposites via additive manufacturing: Cellulose nanofibril networks as “microsponges”

For the successful transition of additive manufacturing (AM) from prototyping to manufacturing of structural load bearing parts, feedstock systems with improved mechanical properties are needed. In terms of sustainability and environmental impact, selection of biobased renewable alternatives instead of petroleum-based options is important. Nanocellulose, which gives plants and trees their structural integrity, can offer significant improvements in the mechanical properties of AM polymers, provided that the right fibril morphology, dispersion and adhesion are achieved. In this study, although the interfacial adhesion between the hydrophilic cellulose nanofibrils (CNFs) and the hydrophobic polylactate matrix was not strong, and the optimal dispersion in individual fibril level was not attained, dramatic improvements in mechanical properties of neat polymer were achieved (up to 80% tensile strength increase, up to 200% elastic modulus increase). An interlocking reinforcing mechanism in which CNF bundles act as “microsponges” was proposed and supported by high resolution electron microscopy images, x-ray computed chromatography scans and thermal and dynamic mechanical behavior. Additively manufactured samples showed significantly higher elastic modulus (7.12 GPa vs. 6.57 GPa at 30 wt % CNF content) and dramatically improved storage modulus (1.72 GPa vs. 0.9 GPa at 30 wt % CNF content) in the printing direction compared to compression molded samples. Finally, in conclusion, preparation and 3D-printing of a 100% biobased renewable feedstock material with substantial mechanical property improvements were successfully demonstrated, which can open up new window of opportunities in the AM industry.

42 ENGINEERING↗

Small-angle neutron scattering from polymer hydrogels with memory effect for medicine immobilization

Hydrogels synthesized based on cross-linked copolymers of 2-hydroxyethyl methacrylate and functional monomers (acrylic acid or dimethylaminoethyl methacrylate), having a memory effect with respect to target medicine (cefazolin), have been investigated by small-angle neutron scattering. The hydrogels are found to have a two-level structural organization: large (up to 100 nm) aggregates filled with network cells (4-7 nm in size). The structural differences in the anionic, cationic, and amphiphilic hydrogels and the relationship between their structure and the ability of hydrogels to absorb moisture are shown. A relationship between the memory effect during cefazolin immobilization and the internal structure of hydrogels, depending on their composition and type of functional groups, is established.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Topological aspects of lanthanide–adipate–aqua compounds: Close packed and open framework structures

A search in the Cambridge Structural Database (CSD) for lanthanide complexes with adipate [OOC(CH{sub 2}){sub 4}COO]{sup 2−} and aqua ligands retrieved a fair number of compounds. To this dataset a new lanthanum metal–organic framework, ([La{sub 2}(adip){sub 3}(H{sub 2}O){sub 2}] (1) (adipH{sub 2}=adipic acid), synthesised and structurally characterized in these labs, was included. The crystal structures of these coordination polymers, of general formulation [Ln{sub 2}(adip){sub 3}(H{sub 2}O){sub x}], exhibit a variety of topologies and dimensionality, which were clustered in different classes and described in detail. It was explored that the majority of these evidences the presence of metal chains or dinuclear Ln{sub 2} entities (separated in both cases by 4.0–4.8 Å), where lanthanide ions are differently connected by carboxylate groups with chelating or oxygen-bridging mode. The different amount of coordinated water molecules appear to affect the solid state networks. Moreover the crystal packing of these compounds shows peculiar aspects and examples were reported in the literature where the long alkyl chain of adipate connectors give rise to interpenetrated structures, or to porous material where lattice water or neutral larger molecules are clathrated. - Graphical abstract: A survey of structures and topologies of lanthanide adipate compounds is presented. A newly synthesized lanthanium adipate complex ([La{sub 2}(adip){sub 3}(H{sub 2}O){sub 2}] (adipH{sub 2}=adipic acid) is also reported. - Highlights: • The use of lanthanide and adipic acid demonstrate the possibility to construct coordination polymer of different dimensionality. • The number of coordination and adipate conformation influence the different topologies. • The ionic radii of the rare earth cations seem also to affect the architecture observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Symmetry-breaking in double gyroid block copolymer films by non-affine distortion

Soft-matter bicontinuous networks find a double gyroid structure from block copolymer (BCP) self-assembly. A gyroid structure composed of dissimilar blocks has proven its potential as a soft crystal capable of tuning structural periodicity and symmetry, of which the lattice dimension is variable with molecular weight of the polymer. Using an asymmetric polystyrene- b -poly(methyl methacrylate) (PS- b -PMMA), in this study we show that the self-assembled gyroid films formed via a solvent vapor annealing (SVA) process undergo unique structural distortion due to directional deformation immediately upon deswelling. During the SVA process with PS- b -PMMA films, transient cylinders developed from the as-cast morphology transform into a cubic gyroid structure in a swollen state. Rapid and spontaneous deswelling processes -the manners in which the films contract along the z-direction while retaining an enlarged lateral dimension of the cubic form -lead to triclinic gyroid structures with z-directional contraction ratios ( C z ) of 2.5 and 2.0, respectively. Our X-ray analysis reveals that the deswelling process of the swollen gyroid films produces a notable symmetry-breaking in non-affine gyroid structure that elicits several forbidden reflections such as {110} and {200} reflections. For further characterization of the symmetry-breaking, we delineate the structural features of noncubic gyroid films by computing electron-density difference maps assisted with X-ray measurements. Level-set approach is accordingly developed to quantitate the structural characteristics of the maps in terms of inversion symmetry-breaking, suggesting its possible application to optical Weyl photonic crystals.

36 MATERIALS SCIENCE↗

Development of hierarchical, tunable pore size polymer foams for ICF targets

In this study, one of the great challenges of inertial confinement fusion experiments is poor understanding of the effects of reactant heterogeneity on fusion reactions. The Marble campaign, conceived at Los Alamos National Laboratory, aims to gather new insights into this issue by utilizing target capsules containing polymer foams of variable pore sizes, tunable over an order of magnitude. Here, we describe recent and ongoing progress in the development of CH and CH/CD polymer foams in support of Marble. Hierarchical and tunable pore sizes have been achieved by utilizing a sacrificial porogen template within an open-celled poly(divinylbenzene) or poly(divinylbenzene-co-styrene) aerogel matrix, resulting in low-density foams (~30 mg/ml) with continuous multimodal pore networks.

36 MATERIALS SCIENCE↗

Image-based model of the spectrin cytoskeleton for red blood cell simulation

We simulate deformable red blood cells in the microcirculation using the immersed boundary method with a cytoskeletal model that incorporates structural details revealed by tomographic images. The elasticity of red blood cells is known to be supplied by both their lipid bilayer membranes, which resist bending and local changes in area, and their cytoskeletons, which resist in-plane shear. The cytoskeleton consists of spectrin tetramers that are tethered to the lipid bilayer by ankyrin and by actin-based junctional complexes. We model the cytoskeleton as a random geometric graph, with nodes corresponding to junctional complexes and with edges corresponding to spectrin tetramers such that the edge lengths are given by the end-to-end distances between nodes. The statistical properties of this graph are based on distributions gathered from three-dimensional tomographic images of the cytoskeleton by a segmentation algorithm. We show that the elastic response of our model cytoskeleton, in which the spectrin polymers are treated as entropic springs, is in good agreement with the experimentally measured shear modulus. By simulating red blood cells in flow with the immersed boundary method, we compare this discrete cytoskeletal model to an existing continuum model and predict the extent to which dynamic spectrin network connectivity can protect against failure in the case of a red cell subjected to an applied strain. As a result, the methods presented here could form the basis of disease- and patient-specific computational studies of hereditary diseases affecting the red cell cytoskeleton.

59 BASIC BIOLOGICAL SCIENCES↗

Ketimine modifications as a route to novel amorphous and derived semicrystalline poly(arylene ether ketone) homo- and copolymers

A series of amine terminal amorphous poly(arylene ether ketone) oligomers of controlled molecular weights (2-15 K) were synthesized. These oligomers have been found to undergo 'self-crosslinking' reactions upon heating above 220 C, via the reaction of the terminal amine groups with the in-chain keto carbonyl functionalities. The resulting networks are ductile, chemically resistant, and nonporous. The networks obtained via generated ketimine functionality were characterized by solid state NMR. They have also been found to be remarkably stable toward hydrolysis. Ketimine functional bishalide monomers have also been synthesized. Such monomers have been utilized to synthesize a wide variety of amorphous poly(arylene ether) ketimine polymers. A high molecular weight hydroquinone functional poly(arylene ether) ketimine has been acid treated to regenerate a poly(arylene ether ketone) backbone in solution. This novel procedure thus allows for the synthesis of important matrix resins under relatively mild conditions.

Mohanty, D. K.↗

Laser Ablation Increases PEM/Catalyst Interfacial Area

An investigational method of improving the performance of a fuel cell that contains a polymer-electrolyte membrane (PEM) is based on the concept of roughening the surface of the PEM, prior to deposition of a thin layer of catalyst, in order to increase the PEM/catalyst interfacial area and thereby increase the degree of utilization of the catalyst. The roughening is done by means of laser ablation under carefully controlled conditions. Next, the roughened membrane surface is coated with the thin layer of catalyst (which is typically platinum), then sandwiched between two electrode/catalyst structures to form a membrane/ele c t - rode assembly. The feasibility of the roughening technique was demonstrated in experiments in which proton-conducting membranes made of a perfluorosulfonic acid-based hydrophilic, protonconducting polymer were ablated by use of femtosecond laser pulses. It was found that when proper combinations of the pulse intensity, pulse-repetition rate, and number of repetitions was chosen, the initially flat, smooth membrane surfaces became roughened to such an extent as to be converted to networks of nodules interconnected by filaments (see Figure 1). In further experiments, electrochemical impedance spectroscopy (EIS) was performed on a pristine (smooth) membrane and on two laser-roughened membranes after the membranes were coated with platinum on both sides. Some preliminary EIS data were interpreted as showing that notwithstanding the potential for laser-induced damage, the bulk conductivities of the membranes were not diminished in the roughening process. Other preliminary EIS data (see Figure 2) were interpreted as signifying that the surface areas of the laser-roughened membranes were significantly greater than those of the smooth membrane. Moreover, elemental analyses showed that the sulfur-containing molecular groups necessary for proton conduction remained intact, even near the laser-roughened surfaces. These preliminary results can be taken as indications that laser-roughened PEMs should function well in fuel cells and, in particular, should exhibit current and power densities greater than those attainable by use of smooth membranes.

Whitacre, Jay↗

Three Pb{sup II} coordination polymers based on 2-(pyridin-2-yl)-1H-imidazole-4,5-dicarboxylic acid: Syntheses, crystal structures, and fluorescent properties

Three lead coordination polymers, [PbCl(C{sub 10}H{sub 6}N{sub 3}O{sub 4})(H{sub 2}O)·H{sub 2}O]{sub n} (1), [Pb(C{sub 10}H{sub 6}N{sub 3}O{sub 4}){sub 2}(H{sub 2}O)]{sub n} (2) and [Pb{sub 3}(C{sub 10}H{sub 5}N{sub 3}O{sub 4}){sub 3}]{sub n} (3) (C{sub 10}H{sub 7}N{sub 3}O{sub 4}=2-(pyridin-2-yl)-1H-imidazole-4,5-dicarboxylic acid), have been hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction. In 1, Cl anions connected neighboring wave-like 2D layers, which are constructed with left- and right-handed helical chains, into a 3D network structure with a (6{sup 3})(6{sup 5}·8) topology. In 2, Pb cations are linked into a 3D 6{sup 6} network with left- and right-handed helixes by μ{sub 2}-bridging C{sub 10}H{sub 6}N{sub 3}O{sub 4}{sup −} ligands. In 3, C{sub 10}H{sub 5}N{sub 3}O{sub 4}{sup 2−} ligands link Pb{sub 6}O{sub 12} clusters into a 3D (4{sup 12}·6{sup 3}) network. Their fluorescent properties were also investigated. - Graphical abstract: Three 3D lead compounds based on 2-(pyridin-2-yl)-1H-imidazole-4,5-dicarboxylic acid have been hydrothermally synthesized. Four new coordination modes of the organic ligand are first reported. Display Omitted - Highlights: • Three new Pb(II) complexes have been synthesized and characterized. • Left- and right-handed helical chains can be found in the 3D networks of 1 and 2. • Pb{sub 6}O{sub 12} clusters are connected into (4{sup 12}·6{sup 3}) network in 3.

36 MATERIALS SCIENCE↗

Different dimensional coordination polymers with 4,4'-oxybis(benzoate): Syntheses, structures and properties

Five transition-metal coordination polymers, namely, [Zn{sub 7}Cl{sub 6}(oba){sub 4}]{sub n} (1), [Cd{sub 7}Cl{sub 6}(oba){sub 4}]{sub n} (2), [Zn(oba)(H{sub 2}O)]{sub n} (3), [Ag{sub 2}(oba)]{sub n} (4) and [Co(oba)(H{sub 2}O){sub 2}]{sub n} (5) (H{sub 2}oba=4,4′-oxydibenzoic acid), have been achieved under hydrothermal conditions and structurally characterized by IR, elemental analyses, X-ray single-crystal diffraction and TGA. The X-ray single-crystal diffraction reveals that compounds 1 and 2 are isomorphism, featuring pillared-layer 3D motifs, in which the 2D inorganic layers (Zn{sub 6}Cl{sub 7}){sub n} (or (Cd{sub 6}Cl{sub 7}){sub n}) are connected by oba{sup 2−} pillars. Compound 3 exhibits 1D stair-like chain and extends to a 3D network by two different interchain O–H–O hydrogen bonding interactions while compound 4 features wave chains and stretches to 2D layer by interchain Ag–O weak contacts. Compound 5 shows 2D network in which Co-chains are pillared by oba{sup 2−} ligand and then forms a 3D network by four different O–H–O hydrogen bonding interactions. Furthermore, 1–4 exhibit luminescent properties at a solid state and 5 shows antiferromagnetic behavior. - Graphical abstract: Five new transition-metal coordination complexes 1–5 have been synthesized and characterized by single-crystal X-ray diffractions, IR spectra, elemental analyses, thermogravimetric analyses (TGA), photoluminescent spectra and magnetic measurement. - Highlights: • Compound 1 exhibits a pillared-layer 3D network. • The photoluminescent properties of 1–4 have been measured. • Compound 5 exhibits antiferromagnetic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗