Search NASA⌕ Search

SEARCH · Search NASA

Results for “Power conversion efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Substituent effects in a series of 1,7-C[subscript 60](R[subscript F])[subscript 2] compounds (R[subscript F] = CF[subscript 3], C[subscript 2]F[subscript 5], n-C[subscrip 3]F[subscript 7], i-C[subscript 3]F[subscript 7], n-C[subscript 4]F[subscript 9], s-C[subscript 4]F[subscript 9], n-C[subscript 8]F[subscript 17]): electron affinities, reduction potentials and E(LUMO) values are not always correlated

A series of seven structurally-similar compounds with different pairs of R{sub F} groups were prepared, characterized spectroscopically, and studied by electrochemical methods (cyclic and square-wave voltammetry), low-temperature anion photoelectron spectroscopy, and DFT calculations (five of the compounds are reported here for the first time). This is the first time that a set of seven R{sub F} groups have been compared with respect to their relative effects on E{sub 1/2}(0/-), electron affinity (EA), and the DFT-calculated LUMO energy. The compounds, 1,7-C{sub 60}(R{sub F}){sub 2} (R{sub F} = CF{sub 3}, C{sub 2}F{sub 5}, i-C{sub 3}F{sub 7}, n-C{sub 3}F{sub 7}, s-C{sub 4}F{sub 9}, n-C{sub 4}F{sub 9} and n-C{sub 8}F{sub 21}), were found to have statistically different electron affinities (EA), at the {+-}10 meV level of uncertainty, but virtually identical first reduction potentials, at the {+-}10 mV level of uncertainty. The lack of a correlation between EA and E{sub 1/2}(0/-), and between E(LUMO) and E{sub 1/2}(0/-), for such similar compounds is unprecedented and suggests that explanations for differences in figures of merit for materials and/or devices that are based on equating easily measurable E{sub 1/2}(0/-) values with EAs or E(LUMO) values should be viewed with caution. The solubilities of the seven compounds in toluene varied by nearly a factor of six, but in an unpredictable way, with the C{sub 2}F{sub 5} and s-C{sub 4}F{sub 9} compounds being the most soluble and the i-C{sub 3}F{sub 7} compound being the least soluble. The effects of the different R{sub F} groups on EAs, E(LUMO) values, and solubilities should help fluorine chemists choose the right R{sub F} group to design new materials with improved morphological, electronic, optical, and/or magnetic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microlens array induced light absorption enhancement in polymer solar cells

Over the last decade, polymer solar cells (PSCs) have attracted a lot of attention and highest power conversion efficiencies (PCE) are now close to 10%. Here we employ an optical structure – the microlens array (MLA) – to increase light absorption inside the active layer, and PCE of PSCs increased even for optimized devices. Normal incident light rays are refracted at the MLA and travel longer optical paths inside the active layers. Two PSC systems – poly(3-hexylthiophene-2,5-diyl):(6,6)-phenyl C61 butyric acid methyl ester (P3HT:PCBM) and poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophenediyl]:(6,6)-phenyl C71 butyric acid methyl ester (PCDTBT:PC70BM) – were investigated. In the P3HT:PCBM system, MLA increased the absorption, absolute external quantum efficiency, and the PCE of an optimized device by [similar]4.3%. In the PCDTBT:PC70BM system, MLA increased the absorption, absolute external quantum efficiency, and PCE by more than 10%. In addition, simulations incorporating optical parameters of all structural layers were performed and they support the enhancement of absorption in the active layer with the assistance of MLA. Our results show that utilizing MLA is an effective strategy to further increase light absorption in PSCs, in which optical losses account for [similar]40% of total losses. MLA also does not pose materials processing challenges to the active layers since it is on the other side of the transparent substrate.

36 MATERIALS SCIENCE↗

Influence of heteroatoms on photovoltaic performance of donor–acceptor copolymers based on 2,6-di(thiophen-2-yl)benzo[1,2-b:4,5-b']difurans and diketopyrrolopyrrole

Donor–acceptor conjugated polymers based on the novel donor 3,7-didodecyl-2,6-di(thiophen-2-yl)benzo[1,2-b:4,5-b']difuran, and 1,4-diketopyrrolo[3,4-c]pyrrole as the acceptor were synthesized via the Stille cross-coupling reaction. The alkyl chains on the diketopyrrolopyrrole monomers were varied to engineer the solubility and morphology of the materials. Thiophene and furan moieties were used to flank the DPP group and the impact of these heterocycles on the polymers' properties evaluated. All of the polymers have similar optoelectronic properties with optical band-gaps of 1.3–1.4 eV, LUMO levels of -3.7 to -3.8 eV and HOMO levels of -5.5 to -5.6 eV. The furan-containing polymers have better solubility than the all-thiophene polymers, as significantly higher molecular weight materials of the former were readily dissolved. When the polymers were used as donor materials along with PC71BM as the electron-acceptor in bulk-heterojunction photovoltaic cells, power conversion efficiencies of up to 2.9% were obtained, with the furan-containing polymers giving the best results.

14 SOLAR ENERGY↗

Correlation of polymeric compatibilizer structure to its impact on the morphology and function of P3HT:PCBM bulk heterojunctions

Here we present the impact of various polymeric compatibilizers, including end-functionalized P3HTs and diblock copolymers containing P3HT, on the structure and function of poly(3-hexylthiophene) (P3HT):[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) bulk heterojunctions. Careful analyses of small angle neutron scattering curves provide a measure of the miscibility of PCBM in P3HT, the average PCBM domain size, and the interfacial area between PCBM and the P3HT-rich phase in the uncompatibilized and compatibilized systems. Differential scanning calorimetry (DSC) also provides information regarding the changes in the crystallinity of P3HT due to the presence of the compatibilizer. Results show that most compatibilizers cause the domain sizes to decrease and the P3HT crystallinity to increase; however, some cause an increase in domain size, suggesting that they are not effective interfacial modifiers. The correlation of morphology with photovoltaic activity shows that the decreased domain size, increased crystallinity and increased interfacial area do not always result in improved power conversion efficiency (PCE). It appears that the introduction of an insulating molecule at the PCBM:P3HT interface as a compatibilizer results in a decrease in PCE. Thus, the presence of the compatibilizer at this interface dominates the photovoltaic activity, rather than the morphological control.

36 MATERIALS SCIENCE↗

High work-function hole transport layers by self-assembly using a fluorinated additive

The hole transport polymer poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) derives many of its favorable properties from a PSS-rich interfacial layer that forms spontaneously during coating. Since PEDOT:PSS is only usable as a blend it is not possible to study PEDOT:PSS without this interfacial layer. Through the use of the self-doped polymer sulfonated poly(thiophene-3-[2-(2-methoxyethoxy) ethoxy]-2,5-diyl) (S-P3MEET) and a polyfluorinated ionomer (PFI) it is possible to compare transparent conducting organic films with and without interfacial layers and to understand their function. Using neutron reflectometry, we show that PFI preferentially segregates at the top surface of the film during coating and forms a thermally stable surface layer. Because of this distribution we find that even small amounts of PFI increase the electron work function of the HTL. We also find that annealing at 150°C and above reduces the work function compared to samples heated at lower temperatures. Using near edge x-ray absorption fine structure spectroscopy and gas chromatography we show that this reduction in work function is due to S-P3MEET being doped by PFI. Organic photovoltaic devices with S-P3MEET/PFI hole transport layers yield higher power conversion efficiency than devices with pure S-P3MEET or PEDOT:PSS hole transport layers. Additionally, devices with a doped interface layer of S-P3MEET/PFI show superior performance to those with un-doped S-P3MEET.

14 SOLAR ENERGY↗

High open-circuit voltage small-molecule p-DTS(FBTTh 2 ) 2 .ICBA bulk heterojunction solar cells – morphology, excited-state dynamics, and photovoltaic performance

The photovoltaic performance of bulk heterojunction solar cells using the solution-processable small molecule donor 7,7'-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl)bis(6-fluoro-4-(5'-hexyl-[2,2'-bithiophene]-5-yl)benzo[c][1,2,5]thiadiazole) (p-DTS(FBTTh 2 ) 2 in combination with indene-C60 bis-adduct (ICBA) as an acceptor is systematically optimized by altering the processing conditions. A high open-circuit voltage of 1 V, more than 0.2 V higher than that of a p-DTS(FBTTh 2 ) 2 :PC 70 BM blend, is achieved. However, the power conversion efficiency remains around 5% and thus is lower than ~8% previously reported for p-DTS(FBTTh 2 ) 2 :PC 70 BM. Transient absorption (TA) pump–probe spectroscopy over a wide spectral (Vis-NIR) and dynamic (fs to μs) range in combination with multivariate curve resolution analysis of the TA data reveals that generation of free charges is more efficient in the blend with PC 70 BM as an acceptor. In contrast, blends with ICBA create more coulombically bound interfacial charge transfer (CT) states, which recombine on the sub-nanosecond timescale by geminate recombination. Furthermore, the ns to μs charge carrier dynamics in p-DTS(FBTTh 2 ) 2 :ICBA blends are only weakly intensity dependent implying a significant contribution of recombination from long-lived CT states and trapped charges, while those in p-DTS(FBTTh 2 ) 2 :PC 70 BM decay via an intensity-dependent recombination mechanism indicating that spatially separated (free) charge carriers are observed, which can be extracted as photocurrent from the device.

14 SOLAR ENERGY↗

A solution-processed high performance organic solar cell using a small molecule with the thieno[3,2- b ]thiophene central unit

A solution processed acceptor–donor–acceptor (A–D–A) small molecule with thieno[3,2-b]thiophene as the central building block and 2-(1,1-dicyanomethylene)-rhodanine as the terminal unit, DRCN8TT, was designed and synthesized. The optimized power conversion efficiency (PCE) of 8.11% was achieved, which is much higher than that of its analogue molecule DRCN8T. In this work, the improved performance was ascribed to the morphology which consisted of small, highly crystalline domains that were nearly commensurate with the exiton diffusion length.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced crystalline morphology of a ladder-type polymer bulk-heterojunction device by blade-coating

A blade-coating process was employed to fabricate bulk-heterojunction (BHJ) polymer solar cells based on a ladder-type polymer (PIDT-PhanQ) with low crystallinity. Compared to the devices processed by a conventional spin-coating method, an intriguing morphology with enhanced phase-separation and increased crystallinity was achieved. As a result, power conversion efficiency up to 7.25% could be achieved from the blade-coated PIDT-PhanQ:PC 71 BM BHJ film, surpassing the original value obtained by spin-coating (6.29%). In this work, this improved photovoltaic performance is attributed to the improved charge carrier mobilities, which correlates well with the increased crystallinity and the organized network of the donor–acceptor phases that produce efficient charge-transporting pathways.

36 MATERIALS SCIENCE↗

Room-temperature, solution-processable organic electron extraction layer for high-performance planar heterojunction perovskite solar cells

Here in this work, we describe a room-temperature, solution-processable organic electron extraction layer (EEL) for high-performance planar heterojunction perovskite solar cells (PHJ PVSCs). This EEL is composed of a bilayered fulleropyrrolidinium iodide (FPI)-polyethyleneimine (PEIE) and PC 61 BM, which yields a promising power conversion efficiency (PCE) of 15.7% with insignificant hysteresis. We reveal that PC 61 BM can serve as a surface modifier of FPI-PEIE to simultaneously facilitate the crystallization of perovskite and the charge extraction at FPI-PEIE/CH 3 NH 3 PbI 3 interface. Furthermore, the FPI-PEIE can also tune the work function of ITO and dope PC 61 BM to promote the efficient electron transport between ITO and PC 61 BM. Based on the advantages of room-temperature processability and decent electrical property of FPI-PEIE/PC 61 BM EEL, a high-performance flexible PVSC with a PCE ~10% is eventually demonstrated. Lastly, this study shows the potential of low-temperature processed organic EEL to replace transition metal oxide-based interlayers for highly printing compatible PVSCs with high-performance.

14 SOLAR ENERGY↗

Intercalation Crystallization of Phase-Pure ..alpha..-HC(NH2)2PbI3 upon Microstructurally Engineered PbI2 Thin Films for Planar Perovskite Solar Cells

The microstructure of the solid-PbI2 precursor thin film plays an important role in the intercalation crystallization of the formamidinium lead triiodide perovskite (..alpa..-HC(NH2)2PbI3). It is shown that microstructurally engineered PbI2 thin films with porosity and low crystallinity are the most favorable for conversion into uniform-coverage, phase-pure ..alpha..-HC(NH2)2PbI3 perovskite thin films. Planar perovskite solar cells fabricated using these thin films deliver power conversion efficiency (PCE) up to 13.8%.

14 SOLAR ENERGY↗

Vertical and lateral morphology effects on solar cell performance for a thiophene–quinoxaline copolymer:PC 70 BM blend

The distribution of electron donor and acceptor in the active layer is known to strongly influence the electrical performance of polymer solar cells for most of the high performance polymer:fullerene systems. The formulation of the solution from which the active layer is spincoated plays an important role in the quest for morphology control. We have studied how the choice of solvent and the use of small amounts of a low vapour pressure additive in the coating solution influence the film morphology and the solar cell performance for blends of poly[2,3-bis-(3-octyloxyphenyl)quinoxaline-5,8-diyl-alt-thiophene-2,5-diyl] (TQ1) and [6,6]-phenyl C 71 -butyric acid methyl ester (PC 70 BM). We have investigated the lateral morphology using atomic force microscopy (AFM) and scanning transmission X-ray microscopy (STXM), the vertical morphology using dynamic secondary ion mass spectrometry (d-SIMS) and variable-angle spectroscopic ellipsometry (VASE), and the surface composition using near-edge X-ray absorption fine structure (NEXAFS). The lateral phase-separated domains observed in films spincoated from single solvents, increase in size with increasing solvent vapour pressure and decreasing PC 70 BM solubility, but are not observed when 1-chloronaphthalene (CN) is added. A strongly TQ1-enriched surface layer is formed in all TQ1:PC 70 BM blend films and rationalized by surface energy differences. The photocurrent and power conversion efficiency strongly increased upon the addition of CN, while the leakage current decreased by one to two orders of magnitude. The higher photocurrent correlates with the finer lateral structure and stronger TQ1-enrichment at the interface with the electron-collecting electrode. This indicates that the charge transport and collection are not hindered by this polymer-enriched surface layer. Neither the open-circuit voltage nor the series resistance of the devices are sensitive to the differences in morphology.

36 MATERIALS SCIENCE↗

Ethynylene-linked benzo[1,2- b :4,5- b' ]dithiophene- alt -diketopyrrolopyrrole alternating copolymer: optoelectronic properties, film morphology and photovoltaic applications

Here, an ethynylene-linked benzo[1,2- b :4,5- b' ]dithiophene- alt -diketopyrrolopyrrole alternating copolymer, EDPP, was designed and synthesized to improve the open-circuit voltage of organic solar cells. The influence of the ethynylene on optoelectronic properties, energy levels, crystallinity, film morphology, and photovoltaic performance was investigated. Optical and electrochemical tests showed that introduction of ethynylene into the polymer backbone resulted in a larger bandgap, deeper HOMO energy level, and enhanced crystallinity due to the planar conformation and electron-withdrawing properties. Grazing incidence wide-angle X-ray scattering (GIWAXS) showed that the pure EDPP film preferentially adopted a face-on orientation with a π–π stacking distance of 3.65 Å. After thermal annealing the face-on and edge-on orientations coexisted and the overall degree of crystallinity increased. Blending with PC 71 BM did not disrupt the crystallinity of the EDPP. Resonant soft X-ray scattering (RSoXS) showed that the EDPP:PC 71 BM blend films contained large domains, a few hundred nanometers in size. As a result, EDPP:PC 71 BM photovoltaic devices exhibited a high open-circuit voltage of 0.88 V, but a low short-circuit current, with a moderate power conversion efficiency of 1.98%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of (Ga 1-x Zn x )(N 1-x O x ) nanocrystals with a wide range of compositions

We describe the synthesis and characterization of wurtzite (Ga 1-x Zn x )(N 1-x O x ) nanocrystals with a wide range of compositions and a focus on properties relevant for solar fuel generation. (Ga 1-x Zn x )(N 1-x O x ), a solid solution of GaN and ZnO, is an intriguing material because it exhibits composition-dependent visible absorption even though the parent semiconductors absorb in the UV. When functionalized with co-catalysts, (Ga 1-x Zn x )(N 1-x O x ) is also capable of water splitting under visible irradiation. Here, we examine the synthesis of (Ga 1-x Zn x )(N 1-x O x ) nanocrystals to understand how they form by nitridation of ZnO and ZnGa 2 O 4 nanocrystalline precursors. We find that the ZnO precursor is critical for the formation of crystalline (Ga 1-x Zn x )(N 1-x O x ) at 650 °C, consistent with a mechanism in which wurtzite (Ga 1-x Zn x )(N 1-x O x ) nucleates topotactically on wurtzite ZnO at an interface with ZnGa 2 O 4 . Using this information, we expand the range of compositions from previously reported 0.30 ≤ x ≤ 0.87 to include the low-x and high-x ends of the range. The resulting compositions, 0.06 ≤ x ≤ 0.98, constitute the widest range of (Ga 1-x Zn x )(N 1-x O x ) compositions obtained by one synthetic method. We then examine how the band gap depends on sample composition and find a minimum of 2.25 eV at x = 0.87, corresponding to a maximum possible solar-to-H 2 power conversion efficiency of 12%. Finally, we examine the photoelectrochemical (PEC) oxidation behavior of thick films of (Ga 1-x Zn x )(N 1-x O x ) nanocrystals with x = 0.40, 0.52, and 0.87 under visible illumination. (Ga 1-x Zn x )(N 1-x O x ) nanocrystals with x = 0.40 exhibit solar PEC oxidation activity that, while too low for practical applications, is higher than that of bulk (Ga 1-x Zn x )(N 1-x O x ) of the same composition. The highest photocurrents are observed at x = 0.52, even though x = 0.87 absorbs more visible light, illustrating that the observed photocurrents are a result of an interplay of multiple parameters which remain to be elucidated. This set of characterizations provides information useful for future studies of composition-dependent PEC properties of nanoscale (Ga 1-x Zn x )(N 1-x O x ).

36 MATERIALS SCIENCE↗

Panchromatic polymer-polymer ternary solar cells enhanced by Forster resonance energy transfer and solvent vapor annealing

Thanks to the bulk-heterojunction (BHJ) feature of polymer solar cells (PSC), additional light active components can be added with ease to form ternary solar cells. This strategy has achieved great success largely due to expanded spectral response range and improved power conversion efficiency (PCE) without incurring excessive processing costs. Here, we report ternary blend polymer–polymer solar cells comprised of PTB7, P3HT, and PC71BM with PCE as high as 8.2%. Analyses of femtosecond time resolved photoluminescence and transient absorption spectroscopy data confirm that P3HT is effective in transferring energy non-radiatively by inducing excitons and prolonging their overall lifetime in PTB7. As a result, solvent vapor annealing (SVA) treatment was employed to rectify the overly-coarse morphology, thus enhancing the fill factor, reducing interfacial recombination, and boosting the PCE to 8.7%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Defect properties of the two-dimensional (CH 3 NH 3 ) 2 Pb(SCN) 2 I 2 perovskite: a density-functional theory study

Recently, solar cells based on 2D (CH 3 NH 3 ) 2 Pb(SCN) 2 I 2 perovskite have realized a power conversion efficiency of 3.23%. In this work, we study the defect properties of (CH 3 NH 3 ) 2 Pb(SCN) 2 I 2 through density-functional theory calculations. It is found that the lower crystal structure dimensionality of (CH 3 NH 3 ) 2 Pb(SCN) 2 I 2 makes the valence band maximum lower and the conduction band minimum higher as compared to its 3D CH 3 NH 3 PbI 3 perovskite counterpart, resulting in relatively deeper defect transition levels. Our calculated defect formation energies suggest that if the 2D (CH 3 NH 3 ) 2 Pb(SCN) 2 I 2 perovskite absorbers are synthesized under Pb-poor and I-rich conditions, the dominant defects should be Pb vacancies, which create shallow levels. Finally, the resultant perovskite films are expected to exhibit p-type conductivity with a relatively long carrier lifetime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A low viscosity, low boiling point, clean solvent system for the rapid crystallisation of highly specular perovskite films

Perovskite-based photovoltaics have, in recent years, become poised to revolutionise the solar industry. While there have been many approaches taken to the deposition of this material, one-step spin-coating remains the simplest and most widely used method in research laboratories. Although spin-coating is not recognised as the ideal manufacturing methodology, it represents a starting point from which more scalable deposition methods, such as slot-dye coating or ink-jet printing can be developed. Here, we introduce a new, low-boiling point, low viscosity solvent system that enables rapid, room temperature crystallisation of methylammonium lead triiodide perovskite films, without the use of strongly coordinating aprotic solvents. Through the use of this solvent, we produce dense, pinhole free films with uniform coverage, high specularity, and enhanced optoelectronic properties. We fabricate devices and achieve stabilised power conversion efficiencies of over 18% for films which have been annealed at 100 degrees C, and over 17% for films which have been dried under vacuum and have undergone no thermal processing. This deposition technique allows uniform coating on substrate areas of up to 125 cm2, showing tremendous promise for the fabrication of large area, high efficiency, solution processed devices, and represents a critical step towards industrial upscaling and large area printing of perovskite solar cells.

14 SOLAR ENERGY↗

Ultrafast carrier dynamics in bimetallic nanostructure-enhanced methylammonium lead bromide perovskites

In this paper, we examine the impact of hybrid bimetallic Au/Ag core/shell nanostructures on the carrier dynamics of methylammonium lead tribromide (MAPbBr 3 ) mesoporous perovskite solar cells (PSCs). Plasmon-enhanced PSCs incorporated with Au/Ag nanostructures demonstrated improved light harvesting and increased power conversion efficiency by 26% relative to reference devices. Two complementary spectral techniques, transient absorption spectroscopy (TAS) and time-resolved photoluminescence (trPL), were employed to gain a mechanistic understanding of plasmonic enhancement processes. TAS revealed a decrease in the photobleach formation time, which suggests that the nanostructures improve hot carrier thermalization to an equilibrium distribution, relieving hot phonon bottleneck in MAPbBr3 perovskites. TAS also showed a decrease in carrier decay lifetimes, indicating that nanostructures enhance photoinduced carrier generation and promote efficient electron injection into TiO 2 prior to bulk recombination. Furthermore, nanostructure-incorporated perovskite films demonstrated quenching in steady-state PL and decreases in trPL carrier lifetimes, providing further evidence of improved carrier injection in plasmon-enhanced mesoporous PSCs.

36 MATERIALS SCIENCE↗

Design rules for the broad application of fast (<1 s) methylamine vapor based, hybrid perovskite post deposition treatments

While organo-metal halide perovskite photovoltaics have seen rapid development, growth of high quality material remains a challenge. Herein, we report a facile post deposition treatment utilizing coordination between methylamine (CH 3 NH 2 ) vapor and CH 3 NH 3 PbI 3 perovskite that rapidly improves film quality, enhancing power conversion efficiency (PCE) by ~9%. We further comprehensively analyze the physical impact of this process with regard to the material's optoelectronic properties and its detailed microstructural changes. Connecting this with an analysis of the source of organo-metal halide perovskite reactivity toward the vapor as well as phase behavior as a function of CH 3 NH 2 vapor pressure and time, we provide design rules for the broad, rational extension of this process to new systems and scales.

14 SOLAR ENERGY↗