Search NASA⌕ Search

SEARCH · Search NASA

Results for “Precursor analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Interpreting inorganic compositional depth profiles to understand the rate-limiting step in vapor phase infiltration processes

Vapor phase infiltration (VPI) is a post-polymerization modification technique that infuses inorganics into polymers to create organic–inorganic hybrid materials with new properties. Much is yet to be understood about the chemical kinetics underlying the VPI process. The aim of this study is to create a greater understanding of the process kinetics that govern the infiltration of trimethyl aluminum (TMA) and TiCl 4 into PMMA to form inorganic-PMMA hybrid materials. To gain insight, this paper initially examines the predicted results for the spatiotemporal concentrations of inorganics computed from a recently posited reaction–diffusion model for VPI. This model provides insight on how the Damköhler number (reaction versus diffusion rates) and non-Fickian diffusional processes (hindering) that result from the material transforming from a polymer to a hybrid can affect the evolution of inorganic concentration depth profiles with time. Subsequently, experimental XPS depth profiles are collected for TMA and TiCl 4 infiltrated PMMA films at 90 °C and 135 °C. The functional behavior of these depth profiles at varying infiltration times are qualitatively compared to various computed predictions and conclusions are drawn about the mechanisms of each of these processes. TMA infiltration into PMMA appears to transition from a diffusion-limited process at low temperatures (90 °C) to a reaction-limited process at high temperatures (135 °C) for the film thicknesses investigated here (200 nm). While TMA appears to fully infiltrate these 200 nm PMMA films within a few hours, TiCl 4 infiltration into PMMA is considerably slower, with full saturation not occurring even after 2 days of precursor exposure. Infiltration at 90 °C is so slow that no clear conclusions about mechanism can be drawn; however, at 135 °C, the TiCl 4 infiltration into PMMA is clearly a reaction-limited process, with TiCl 4 permeating the entire thickness (at low concentrations) within only a few minutes, but inorganic loading continuously increasing in a uniform manner over a course of 2 days. Near-surface deviations from the uniform-loading expected for a reaction-limited process also suggest that diffusional hindering is high for TiCl 4 infiltration into PMMA. In conclusion, these results demonstrate a new, ex situ analysis approach for investigating the rate-limiting process mechanisms for vapor phase infiltration.

36 MATERIALS SCIENCE↗
DOE OSTI2024

On the subject of large-scale pool fires and turbulent boundary layer interactions

The role to which a realistic inflow turbulent boundary layer (TBL) influences transient and mean large-scale pool fire quantities of interest (QoIs) is numerically investigated. High-fidelity, low-Mach large-eddy simulations that activate low-dissipation, unstructured numerics are conducted using an unsteady flamelet combustion modeling approach with mutiphysics coupling to soot and participating media radiation transport. Three inlet profile configurations are exercised for a large-scale, high-aspect rectangular pool that is oriented perpendicular to the flow direction: a time-varying, TBL inflow profile obtained from a periodic precursor simulation, the time-mean of the transient TBL, and a steady power-law inflow profile that replicates the mean TBL crosswind velocity of 10.0 m/s at a vertical height of 10 m. Results include both qualitative transient flame evolution and quantitative flame shape with ground-level temperature and convective/radiative heat flux profiles. While transient fire events, which are driven by burst-sweep TBL coupling, such as blow-off and reattachment are vastly different in the TBL case (contributing to increased root mean square QoI fluctuation prediction and disparate flame lengths), mean surface QoI magnitudes are similar. Quadrant analysis demonstrates that the TBL configuration modifies burst-sweep phenomena at windward pool locations, while leeward recovery is found. In conclusion, positive fluctuations of convective heat flux correlate with fast moving fluid away from the pool surface due to intermittent combustion events.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Desolvation Processes in Channel Solvates of Niclosamide

The antiparasitic drug niclosamide (NCL) is notable for its ability to crystallize in multiple 1:1 channel solvate forms, none of which are isostructural. Here, using a combination of time-resolved synchrotron powder X-ray diffraction and thermogravimetry, the process-induced desolvation mechanisms of methanol and acetonitrile solvates are investigated. Structural changes in both solvates follow a complicated molecular-level trajectory characterized by a sudden shift in lattice parameters several degrees below the temperature where the desolvated phase first appears. Model fitting of kinetic data obtained under isothermal heating conditions suggests that the desolvation is rate-limited by the nucleation of the solvent-free product. The desolvation pathways identified in these systems stand in contrast to previous investigations of the NCL channel hydrate, where water loss by diffusion initially yields an anhydrous isomorph that converts to the thermodynamic polymorph at significantly higher temperatures. Taking the view that each solvate lattice is a unique “pre-organized” precursor, a comparison of the pathways from different starting topologies to the same final product provides the opportunity to reevaluate assumptions of how various factors (e.g., solvent binding strength, density) influence solid-state desolvation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Ambient-Pressure Chemical Recycling of Thermoset Carbon Fiber-Reinforced Polymers via Low-Temperature Solvolysis: Techno-Economic and Life-Cycle Assessment

Carbon fiber-reinforced polymer (CFRP) waste is rapidly accumulating, with global volumes projected to exceed 500,000 tons annually by 2050. Virgin carbon fiber production is extremely energy- and cost-intensive, and growing demand has intensified supply-chain vulnerabilities associated with precursor availability and reliance on critical materials. Scalable recycling technologies therefore offer not only environmental benefits but also opportunities to reduce material costs and strengthen domestic composite supply chains. This study introduces an efficient, mild chemical recycling method for epoxy-amine CFRPs, utilizing acetic acid (80 wt%) and zinc acetate (1 wt%) at atmospheric pressure and low temperature (~110 °C). The solvolysis process preserves residual resin (~40%) on recycled carbon fibers (rCF), enhancing interfacial bonding in remanufactured composite materials. Recycled fibers retain ~90% of their mechanical properties, and recovered oligomers show potential for reuse in epoxy formulations, supporting material circularity. Techno-economic analysis (TEA) and life-cycle assessment (LCA) confirm the scalability and sustainability of this process.

Recycling CFRP↗
DOE OSTI2019

In situ Preparation of HNbMoO{sub 6}/C Nanocomposite for Sensitive Detection of Clenbuterol

In this paper, we synthesized HNbMoO{sub 6}/C composite through the calcination of octylamine-intercalated HNbMoO{sub 6} precursor. The resulting HNbMoO{sub 6}/C composite showed some new phases of MoO{sub 2}, MoO{sub 3}, NbO{sub 2}, Nb{sub 2}O{sub 5}, and carbon, which was fully confirmed via powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray photoelectron spectroscopy (XPS) technologies. Besides, the HNbMoO{sub 6}/C hybrid was coated on glass carbon electrode to construct an electrochemical sensor for sensitive determination of clenbuterol. The electrochemical behaviors of clenbuterol on the prepared electrode were tested by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) analysis. The results showed that the intercalated carbon can act as active sites to accelerate electron transfer. In addition, more exposed surface areas of the HNbMoO{sub 6}/C composite will facilitate the electrolyte to permeate. The oxidation peak current of clenbuterol was linearly related to its concentration in the range of 1.04 × 10{sup −5} to 7.51 × 10{sup −4} mol L{sup −1}, and the determination limit was calculated to be 3.03 × 10{sup −6} mol L{sup −1} (S/N = 3). This sensor exhibits excellent stability, reproducibility, specificity, and good recoveries when applied to monitor clenbuterol in real samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

In Situ Growth and Interlayer Modulation of Layered Double Hydroxide Thin Films from a Transparent Conducting Oxide Precursor

Layered double hydroxides (LDHs) are a class of cationic-layered solids that can be synthetically designed for a variety of advanced functions. Facile thin film growth of LDHs is an important requisite for a variety of applications including functional coatings, displays, and sensing. In this work we demonstrate, for the first time, an in-situ and patternable thin film synthesis of interconnected Zn-Cr LDH particles from a transparent conducting oxide (TCO) precursor, aluminum-doped zinc oxide (AZO), at room temperature within minutes. Synthetic parameters such as chromium (III) nitrate concentration, solvent composition, and reaction time were found to significantly affect the thickness and morphology of the resulting LDH films. These LDH thin films can undergo interlayer anion exchange, which modulates the interlayer distance of the LDH sheets and surface energy of the thin film. Replacement of the interlayer anion with perfluorooctanoate increases the interlayer sheet distance from 0.9 nm to 2.8 nm and induces a super-hydrophobic thin film that is capable of adsolubilizing and retaining organic guest molecules. The synthetic method and structural analysis of the LDH thin films introduced in this work opens new avenues of application for LDH films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polymer, Additives, and Processing Effects on N95 Filter Performance

The current severe acute respiratory syndrome coronavirus 2 (SARS-COV-2) pandemic has highlighted the need for personal protective equipment, specifically filtering facepiece respirators like N95 masks. While it is common knowledge that polypropylene (PP) is the industry standard material for filtration media, trial and error is often required to identify suitable commercial precursors for filtration media production. This work aims to identify differences between several commercial grades of PP and demonstrate the development of N95 filtration media with the intent that the industry partners can pivot and help address N95 shortages. Three commercial grades of high melt flow index PP were melt blown at Oak Ridge National Laboratory and broadly characterized by several methods including differential scanning calorimetry (DSC), X-ray diffraction (XRD), and neutron scattering. Despite the apparent similarities (high melt flow and isotacticity) between PP feedstocks, the application of corona charging and charge enhancing additives improve each material to widely varying degrees. From the analysis performed here, the most differentiating factor appears to be related to crystallization of the polymer and the resulting electret formation. Materials with higher crystallization onset temperatures, slower crystallization rates, and larger number of crystallites form a stronger electret and are more effective at filtration.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Crucial roles of eastward propagating environments in the summer MCS initiation over the U.S. Great Plains

Mesoscale convective systems (MCSs) frequently occur over the U.S. Great Plains during summer. An analysis using self-organizing map is conducted to identify four types of summer MCS initiation environments during 2004-2017. The first two types feature favorable large-scale environments at both upper and low levels, while Type-3 has favorable lower-level and surface conditions but unfavorable upper-level circulation, and Type-4 features the most unfavorable large-scale environments for MCS initiation. Despite the unfavorable large-scale environment, the convection-centered environments in Type-4 are favorable for MCS initiation and similar to the first two types, suggesting a role of sub-synoptic disturbances as an MCS precursor. All four types of the MCS initiation delineate a clear eastward propagating feature in many fields, such as upper-level potential vorticity/geopotential height, surface pressure and surface equivalent potential temperature, upstream up to 25°-longitude west of and ~36 hours before the MCS initiation. The propagating environments and local, non-propagating low-level moisture are found to be important in MCS initiation at the foothill of the Rocky Mountains, but over the central Great Plains, it is the coupling of dynamical and moisture anomalies associated with propagating waves that results in the MCS initiation. By tracking MCSs and mid-tropospheric perturbations (MPs), a type of sub-synoptic disturbances with Rocky Mountains origin, ~30% of MPs is associated with MCS initiation, mostly in Type-4. Although MPs are related to a small fraction of MCS initiation, MCSs that are associated with MPs tend to produce more rainfall in a larger area with a stronger convective intensity, suggesting MPs to be a source of intense MCSs in summer.

Song, Fengfei↗
DOE OSTI2012

Structural and Biochemical Characterization of the Salicylyl-acyltranferase SsfX3 from a Tetracycline Biosynthetic Pathway

SsfX3 is a GDSL family acyltransferase that transfers salicylate to the C-4 hydroxyl of a tetracycline intermediate in the penultimate step during biosynthesis of the anticancer natural product SF2575. The C-4 salicylate takes the place of the more common C-4 dimethylamine functionality, making SsfX3 the first acyltransferase identified to act on a tetracycline substrate. The crystal structure of SsfX3 was determined at 2.5 {angstrom}, revealing two distinct domains as follows: an N-terminal {beta}-sandwich domain that resembles a carbohydrate-binding module, and a C-terminal catalytic domain that contains the atypical {alpha}/{beta}-hydrolase fold found in the GDSL hydrolase family of enzymes. The active site lies at one end of a large open binding pocket, which is spatially defined by structural elements from both the N- and C-terminal domains. Mutational analysis in the putative substrate binding pocket identified residues from both domains that are important for binding the acyl donor and acceptor. Furthermore, removal of the N-terminal carbohydrate-binding module-like domain rendered the stand-alone {alpha}/{beta}-hydrolase domain inactive. The additional noncatalytic module is therefore proposed to be required to define the binding pocket and provide sufficient interactions with the spatially extended tetracyclic substrate. SsfX3 was also demonstrated to accept a variety of non-native acyl groups. This relaxed substrate specificity toward the acyl donor allowed the chemoenzymatic biosynthesis of C-4-modified analogs of the immediate precursor to the bioactive SF2575; these were used to assay the structure activity relationships at the C-4 position.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2015

Atomic layer deposition of aluminum sulfide thin films using trimethylaluminum and hydrogen sulfide

Sequential exposures of trimethylaluminum and hydrogen sulfide are used to deposit aluminum sulfide thin films by atomic layer deposition (ALD) in the temperature ranging from 100 to 200 °C. Growth rate of 1.3 Å per ALD cycle is achieved by in-situ quartz crystal microbalance measurements. It is found that the growth rate per ALD cycle is highly dependent on the purging time between the two precursors. Increased purge time results in higher growth rate. Surface limited chemistry during each ALD half cycle is studied by in-situ Fourier transformed infrared vibration spectroscopy. Time of flight secondary ion-mass spectroscopy measurement is used to confirm elemental composition of the deposited films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Catalytic upgrading of ethanol to C8+ distillate range ethers via Guerbet coupling and etherification

In this presentation we describe the catalytic approaches for conversion of ethanol into diesel fuel ethers. This involves first alcohol oligomerization, followed by acid-catalyzed dehydration. As we will show in this presentation, ethanol can be converted to higher linear and α-branched alcohols by C-C coupling reactions (ethanol oligomerization) as well as to high molecular weight esters by C-O coupling reactions with Cu/MgxAlOy (CuHT) catalysts. Alcohols may be converted to ethers via bimolecular dehydration in a subsequent step. We have identified more than 160 number of species in the products including alcohols, esters, aldehydes, ketones, and olefins. Alcohols range from C4 to C10. Both alcohols and esters follow a Schulz-Flory chain growth model. We show the relationship between the catalyst properties (BET surface area, acid and base site count and Cu loading and synthesis method) and the performance in the reactions. We also show that physical mixtures of CuHT and HT can have similar product selectivity of low loading CuHT catalysts. The selectivity towards diesel fuel precursor compounds (hereafter ‘DFPC’) increased with conversion until reaching a plateau at high ethanol conversion (~70%). Alcohol selectivity follows a Schultz-Flory distribution at all studied conversions, and that adsorbed ethanol-derived species may undergo surface oligomerization into 1-butanol and higher alcohols before desorbing in a chain-growth mechanism. Zeolite catalysts convert the C4+ alcohols into C8+ ethers in both batch and continuous flow reactors. Selectivities of up to 80% to C8+ ethers at around 70% conversion using a single pass continuous flow system are achieved. The final product feedstocks obtained from etherification have been used in technoeconomic (TEA) and lifecycle analysis (LCA), which indicate a reduction in greenhouse gas (GHG) emissions of 50% relative to conventional diesel and diesel fuel prices that are lower than biodiesel. These final feedstocks are undergoing engine testing to elucidate the physiochemical properties and compare well to diesel #2 ASTM standards.

Huber, George↗
DOE OSTI2016

Uranium from Seawater Cost Analysis: Recent Updates

Uranium from seawater can act as an economic backstop by putting an effective ceiling on the cost of recovering uranium. Although it is not meant to be a direct competitor with conventionally mined uranium there is significant effort, by a consortium of five national labs and ten universities, to improve the recovery process. Accurately predicting the cost associated with this method of uranium production is an important factor in determining a cost ceiling for uranium fuels and assuring supply security for uranium based nuclear fuel cycles. Given the evolving nature of this technology, this paper aims to provide an update of the economic model to reflect recent progress. The recovery system analyzed here is a passive collection process under persistent development by Oak Ridge and Pacific Northwest National Labs (ORNL and PNNL). The process relies on an amidoxime based uranium adsorbents constructed by co-grafting an amidoxime precursor and a hydrophilic comonomer onto a high density polyethylene (HDPE) backbone. After further chemical processing the adsorbent fibers are braided into 60 meter segments. The braids are then sent out to sea where they are moored to the bottom of the ocean. Upon realization of their soaking campaign the braids are winched up so the uranium may be eluted off the adsorbent. The acidic chemicals used in the elution process require an alkaline regeneration procedure to be applied to the adsorbent before it can be redeployed for another campaign. The deployment and elution process is repeated as many times as economically feasible, as dictated by the severity of degradation suffered by the braid due to the elution process and exposure to seawater. A large number of design and deployment parameters influence the final uranium production cost. Some are strongly affected by the chemical technologies, such as uranium uptake and degradation rate, while others are operational parameters, such as number of adsorbent uses and length of soaking campaign. Still others are both intrinsic and affected by operational choices, such as the ocean temperature and degree of oceanic biofouling. Recent experiments have been focused on improved characterization of the effect of: oceanic temperature, a novel elution method, adsorbent degradation rates, and oceanic biofouling, and they will therefore be the focus of this paper. The degradation results presented here are likely to represent a worst case scenario. Since chemically similar adsorbents were able to achieve a much lower degradation rate with the previous acidic elution process it is very possible that modifications can be made to the new adsorbents to ameliorate the degradation suffered, especially with the new bicarbonate elution process, which is believed to be less harsh. Similarly, the 30% loss in uptake suffered as a result of biofouling is likely an upper-bound. The experiments were conducted in full light and at 20 deg. C. In reality however the braids will be submersed approximately 100 meters beneath the surface, potentially subject to a temperature gradient that may influence biofouling patterns. Also the light reaching the adsorbent surface may not be as intense as in laboratory conditions due to seawater turbidity and shadows cast by nearby braids. In light of these factors, it is appropriate to present a range of costs, reflecting the best and worst case scenarios of all of the parameters considered here. Table II shows the updated parameter ranges and uranium production costs. Ongoing work, particularly into the mitigation of biofouling and degradation, is expected to tighten this cost range and reduce the predicted cost. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Reaction of BCl 3 with H- and Cl-terminated Si(100) as a pathway for selective, monolayer doping through wet chemistry

The reaction of boron trichloride with the H and Cl-terminated Si(100) surfaces was investigated to understand the interaction of this molecule with the surface for designing wet-chemistry based silicon surface doping processes using a carbon- and oxygen-free precursor. The process was followed with X-ray photoelectron spectroscopy (XPS). Within the reaction conditions investigated, the reaction is highly effective on Cl-Si(100) for temperatures below 70°C, at which point both surfaces react with BCl$_3$. The XPS investigation followed the formation of a B 1s peak at 193.5 eV corresponding to (B-O)$_x$ species. Even the briefest exposure to ambient conditions lead to hydroxylation of surface borochloride species. However, the Si 2p signature at 102 eV allowed for a confirmation of the formation of a direct Si-B bond. Density functional theory was utilized to supplement the analysis and identify possible major surface species resulting from these reactions. This work provides a new pathway to obtain a functionalized silicon surface with a direct Si-B bond that can potentially be exploited as a means of selective, ultra-shallow, and supersaturated doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanistically Guided Materials Chemistry: Synthesis of Ternary Nitrides, CaZrN 2 and CaHfN 2

Recent computational studies have predicted many new ternary nitrides, revealing synthetic opportunities in this underexplored phase space. However, synthesizing new ternary nitrides is difficult, in part because intermediate and product phases often have high cohesive energies that inhibit diffusion. Here, we report the synthesis of two new phases, calcium zirconium nitride (CaZrN 2 ) and calcium hafnium nitride (CaHfN 2 ), by solid state metathesis reactions between Ca 3 N2 and MCl 4 (M = Zr, Hf). Although the reaction nominally proceeds to the target phases in a 1:1 ratio of the precursors via Ca 3 N 2 + MCl4 → CaMN 2 + 2 CaCl 2 , reactions prepared this way result in Ca-poor materials (Ca x M 2–x N2, x < 1). A small excess of Ca 3 N 2 (ca. 20 mol %) is needed to yield stoichiometric CaMN 2 , as confirmed by high-resolution synchrotron powder X-ray diffraction. In situ synchrotron X-ray diffraction studies reveal that nominally stoichiometric reactions produce Zr 3+ intermediates early in the reaction pathway, and the excess Ca 3 N 2 is needed to reoxidize Zr 3+ intermediates back to the Zr 4+ oxidation state of CaZrN 2 . Analysis of computationally derived chemical potential diagrams rationalizes this synthetic approach and its contrast from the synthesis of MgZrN 2 . These findings additionally highlight the utility of in situ diffraction studies and computational thermochemistry to provide mechanistic guidance for synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Multi-matrix, dual polarity, tandem mass spectrometry imaging strategy applied to a germinated maize seed: toward mass spectrometry imaging of an untargeted metabolome

Mass spectrometry imaging (MSI) provides high spatial resolution information that is unprecedented in traditional metabolomics analyses; however, the molecular coverage is often limited to a handful of compounds and is insufficient to understand overall metabolomic changes of a biological system. Here, we propose an MSI methodology to increase the diversity of chemical compounds that can be imaged and identified, in order to eventually perform untargeted metabolomic analysis using MSI. We use the desorption/ionization bias of various matrixes for different metabolite classes along with dual polarities and a tandem MSI strategy. The use of multiple matrixes and dual polarities allows us to visualize various classes of compounds, while data-dependent MS/MS spectra acquired in the same MSI scans allow us to identify the compounds directly on the tissue. In a proof of concept application to a germinated corn seed, a total of 166 unique ions were determined to have high-quality MS/MS spectra, without counting structural isomers, of which 52 were identified as unique compounds. According to an estimation based on precursor MSI datasets, we expect over five hundred metabolites could be potentially identified and visualized once all experimental conditions are optimized and an MS/MS library is available. Finally, metabolites involved in the glycolysis pathway and tricarboxylic acid cycle were imaged to demonstrate the potential of this technology to better understand metabolic biology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structural analyses of amorphous calcium carbonate before and after removing strontium ions from an aqueous solution

Amorphous calcium carbonate (ACC) is a precursor of crystalline calcium carbonate; hence, its structural information at the atomic level is very important for controlling the morphology of crystalline calcium carbonate. In this study, we attempted to elucidate the process of Sr extraction from aqueous solution by using ACC for the purpose of removal of radioactive Sr from the contaminated water leaked after the Fukushima Daiichi nuclear accident. Here, the pair distribution functions, g(r) obtained by X-ray and neutron diffraction (ND) measurements show that ACC has a structure partially similar to that of monohydrocalcite, suggesting that ACC is transferred to the crystalline calcium carbonate starting from its crystal nucleus. Rietveld analysis of the ND data showed that the ACC that removed Sr was crystallized to calcite. However, the Sr–O coordination analyzed using extended X-ray absorption fine structure (EXAFS) implies that the local environment of O around Sr is similar to that in crystalline calcium carbonate aragonite.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Effects of Potassium Doping on CO Hydrogenation Over MoS2 Catalysts: A First-Principles Investigation

Periodic density functional theory calculations were performed to explore the effects of doping potassium (K) on the reactivity of CO hydrogenation to mixed higher alcohols over MoS2 catalysts. We found that the doped K species over the model MoS2(100) catalyst surface acts as a unique site for CO adsorption where either the K-C or the K-O bonding is allowed. The charge transfer from the K 4s electron to the conduction band of the MoS2(100) surface slightly enhances CO adsorption at the edge Mo sites. Due to the large electropositive nature, the presence of the surface K species, however, will hinder the dissociative adsorption of hydrogen. As a result, the doping K species drive CO hydrogenation selectivity toward the C2+ alcohols instead of hydrocarbons by increasing CO and decreasing hydrogen coverages on the MoS2 catalysts. To further elucidate the effect of doping K on the shifting of the selectivity toward CO hydrogenation, we calculated several key reaction steps leading to the H2CCO precursor formation, i.e., CO hydrogenation, the C-O bond scission and the C-C coupling (CH2+CO). The C-C coupling step is favorable for both the Mo and S edges. However, the undoped S edge has an overall more thermodynamically favorable reaction profile up to C-O scission compared with the Mo edge. This work was funded by a CRADA project (No. PNNL/297) with Range Fuels. The research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory. The work involving the results analysis and mansucript writing was supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences.

Environmental Molecular Sciences Laboratory↗