Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS DISTRIBUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Behavior of nanoporous thermal barrier coatings under cyclic thermal loading. Computer-aided simulation

The work presents the development of new algorithms for calculating the fraction of thermal energy dissipated during the irradiation on the inner surface of pores. On the basis of these algorithms, the simulation of heat transfer in three-layered systems was carried out taking into account the dissipation of thermal energy in specimens having different porosity. We have performed quantitative estimates of the portion of dissipating thermal energy and its influence on the distribution of thermal stresses in thermal barrier coating systems. It was demonstrated that the presence of pores with a large internal surface area in the intermediate layer material enables two-fold decrease of the internal thermal stresses.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Instrumentation for the Investigation of Pitch Bearing Design and Reliability

Recently, there has been an increasing level of industry interest in pitch system and pitch bearing reliability. Pitch bearings are used in wind turbines to connect the blade root to the hub. Some populations of pitch bearings have demonstrated a 12% failure rate in 20 years. As rotor diameters continue to increase for tall land-based and offshore wind turbines, pitch bearings are becoming even larger in diameter, which can make them vulnerable to deflections and consequent stress concentrations. There is an increased need to more accurately study pitch bearing deformations, misalignment, load distributions, and contact stresses. A significant body of work has investigated fatigue lives and wear characteristics of pitch bearings on ground-based test rigs. NREL has also recently begun a research program related to pitch bearing reliability, recognizing its growing importance for wind turbines. The purpose of this paper is to describe a set of instrumentation that was recently installed on a 1.5 MW wind turbine at the NREL Flatirons Campus and provide an example data set. To the authors' knowledge, this will be the first publicly available pitch bearing data collection campaign on an operational wind turbine.

17 WIND ENERGY↗

Thermal Stress Reduction in Power Switching Devices Using Distributed Loss PWM Concept for Current Source Inverters

A new modulation scheme is proposed for current source inverters (CSIs) that reduces the variation and peak junction temperature in the CSIs' power devices. The distributed loss pulse-width modulation (DLM) concept is introduced and applied to traditional space vector modulation methods to develop modified modulation schemes that reduce the thermal stress on power devices. The device junction temperatures resulting from conventional and DLM schemes are compared. Simulation and experimental results confirm that the proposed DLM concept reduces thermal stress on the devices while maintaining the same high output current waveform quality compared to traditional CSI modulation schemes. The CSI power device lifetime (i.e., the number of cycles to failure) are estimated using the simulation and experimental results. The proposed DLM significantly increases the device lifetime (by 5 to 6 times) by reducing the junction temperature variation compared to the conventional modulations.

42 ENGINEERING↗

Pressure dependence of Kapitza resistance at gold/water and silicon/water interfaces

We conducted non-equilibrium molecular dynamics simulations to investigate Kapitza length at solid/liquid interfaces under the effects of bulk liquid pressures. Gold and silicon were utilized as hydrophilic and hydrophobic solid walls with different wetting surface behaviors, while the number of confined liquid water molecules was adjusted to obtain different pressures inside the channels. The interactions of solid/liquid couples were reparameterized accurately by measuring the water contact angle of solid substrates. In this paper, we present a thorough analysis of the structure, normal stress, and temperature distribution of liquid water to elucidate thermal energy transport across interfaces. Our results demonstrate excellent agreement between the pressures of liquid water in nano-channels and published thermodynamics data. The pressures measured as normal stress components were characterized using a long cut-off distance reinforced by a long-range van der Waals tail correction term. To clarify the effects of bulk liquid pressures on water structure at hydrophilic and hydrophobic solid surfaces, we defined solid/liquid interface spacing as the distance between the surface and the peak value of the first water density layer. Near the gold surface, we found that interface spacing and peak value of first water density layer were constant and did not depend on bulk liquid pressure; near the silicon surface, those values depended directly upon bulk liquid. Our results reveal that the pressure dependence of Kapitza length strongly depends on the wettability of the solid surface. In the case of the hydrophilic gold surface, Kapitza length was stable despite increasing bulk liquid pressure, while it varied significantly at the hydrophobic silicon surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reliability assessment of thrust chamber cooling concepts using probabilistic analysis techniques

The reliability of OFHC (Oxygen Free High Conductivity) copper and NARloy-Z thrust chambers is assessed by applying probabilistic structural analysis techniques to incorporate design parameter variability and uncertainty. Thrust chambers specifically evaluated are the cylindrical test fixtures employed in a plug-nozzle configuration at the NASA Lewis Research Center. Direct sampling Monte Carlo simulations based on a simplified life prediction methodology established probability densities of firing cycles to structural failure. Simulated cyclic lives demonstrated modest agreement to experiment. Similarly, regions of high structural failure probability were determined using a limit state approach employing calculated cumulative distribution functions for effective stress response and an assumed material strength distribution. A probability of failure of 0.012 was calculated at the center of the coolant channel hot-gas-side wall for an OFHC milled channel. Structural response was found to be sensitive to the uncertainties in the thrust chamber thermal environment and the material's thermal expansion coefficient.

Rapp, Douglas C.↗

Reliability assessment of thrust chamber cooling concepts using probabilistic analysis techniques

The reliability of OFHC (Oxygen Free High Conductivity) copper and NARloy-Z thrust chambers is assessed by applying probabilistic structural analysis techniques to incorporate design parameter variability and uncertainty. Thrust chambers specifically evaluated are the cylindrical test fixtures employed in a plug-nozzle configuration at the NASA Lewis Research Center. Direct sampling Monte Carlo simulations based on a simplified life prediction methodology established probability densities of firing cycles to structural failure. Simulated cyclic lives demonstrated modest agreement to experiment. Similarly, regions of high structural failure probability were determined using a limit state approach employing calculated cumulative distribution functions for effective stress response and an assumed material strength distribution. A probability of failure of 0.012 was calculated at the center of the coolant channel hot-gas-side wall for an OFHC milled channel. Structural response was found to be sensitive to the uncertainties in the thrust chamber thermal environment and the material's thermal expansion coefficient.

Rapp, Douglas C.↗

Grayscale Digital Light Processing Gradient Printing for Stress Concentration Reduction and Material Toughness Enhancement

Avoiding stress concentrations is essential to achieve robust parts since failure tends to originate at such concentrations. With recent advances in multimaterial additive manufacturing, it is possible to alter the stress (or strain) distribution by adjusting the material properties in selected locations. Here, we investigate the use of grayscale digital light processing (g-DLP) 3D printing to create modulus gradients around areas of high stress. These gradients prevent failure by redistributing high stresses (or strains) to the neighboring material. The improved material distributions are calculated using finite element analysis. The much-enhanced properties are demonstrated experimentally for thin plates with circular, triangular, and elliptical holes. In conclusion, this work suggests that multimaterial additive manufacturing techniques like g-DLP printing provide a unique opportunity to create tougher engineering materials and parts.

36 MATERIALS SCIENCE↗

Control of Thermal Stress in Dendritic Web Growth

The temperature distributions which are present during the growth of ribbon crystals generate stresses which can adversely affect the growth or perfection of the material. Several different effects occur which depend on the magnitude and distribution of these stresses. In most cases, the observed phenomena are the result of complex interactions of a number of mechanisms. In many instances, however, one mechanism predominates to such an extent that a simplified distinction between the various effects can be made. Definitions based on observed behavior in dendritic web growth are outlined.

Seidensticker, R. G.↗

Small scale mechanical characterization of thin foil materials via pin load microtesting

In situ scanning electron microscope (SEM) experiments, where small-scale mechanical tests are conducted on micro- and nanosized specimens, allow direct visualization of elastic and plastic responses over the entirety of the volume being deformed. This enables precise spatial and temporal correlation of slip events contributing to the plastic flow evidenced in a stress–strain curve. A new pin-loading methodology has been employed, in situ within the SEM, to conduct microtensile tests on thin polycrystalline metal foils. This approach can be tailored to a specific foil whose particular grain size may range from microns to tens of microns. Manufacture of the specialized pin grip was accomplished via silicon photolithography-based processing followed by subsequent focused ion beam finishing. Microtensile specimen preparation was achieved by combining a stencil mask methodology employing broad ion beam sputtering along with focused ion beam milling in the study of several metallic foil materials. Finite-element analyses were performed to characterize the stress and strain distributions in the pin grip and micro-specimen under load. Furthermore, under appropriately conceived test conditions, uniaxial stress–strain responses measured within these foils by pin-load microtensile testing exhibit properties consistent with larger scale tests.

36 MATERIALS SCIENCE↗

Influence of the charge trap density distribution in a gate insulator on the positive-bias stress instability of amorphous indium-gallium-zinc oxide thin-film transistors

We investigated the positive-bias stress (PBS) instability of thin film transistors (TFTs) composed of different types of first-gate insulators, which serve as a protection layer of the active surface. Two different deposition methods, i.e., the thermal atomic layer deposition (THALD) and plasma-enhanced ALD (PEALD) of Al{sub 2}O{sub 3}, were applied for the deposition of the first GI. When THALD was used to deposit the GI, amorphous indium-gallium-zinc oxide (a-IGZO) TFTs showed superior stability characteristics under PBS. For example, the threshold voltage shift (ΔV{sub th}) was 0 V even after a PBS time (t{sub stress}) of 3000 s under a gate voltage (V{sub G}) condition of 5 V (with an electrical field of 1.25 MV/cm). On the other hand, when the first GI was deposited by PEALD, the ΔV{sub th} value of a-IGZO TFTs was 0.82 V after undergoing an identical amount of PBS. In order to interpret the disparate ΔV{sub th} values resulting from PBS quantitatively, the average oxide charge trap density (N{sub T}) in the GI and its spatial distribution were investigated through low-frequency noise characterizations. A higher N{sub T} resulted during in the PEALD type GI than in the THALD case. Specifically, the PEALD process on a-IGZO layer surface led to an increasing trend of N{sub T} near the GI/a-IGZO interface compared to bulk GI owing to oxygen plasma damage on the a-IGZO surface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Geomechanical simulation of the stress tensor rotation caused by injection of cold water in a deep geothermal reservoir

We present a three-dimensional thermohydromechanical numerical study of the evolution and distribution of the stress tensor within the northwest part of The Geysers geothermal reservoir (in California), including a detailed study of the region around one injection well from 2003 to 2012. Initially, after imposing a normal faulting stress regime, we calculated local changes in the stress regime around injection wells. Our results were compared with previously published studies in which the stress state was inferred from inverting the focal plane mechanism of seismic events. Our main finding is that changes in stress tensor orientation are caused by injection-induced progressive cooling of the reservoir, as well as by the seasonal variations in injection rate. Because of the gravity flow and cooling around a liquid zone formed by the injection, the vertical stress reduction is larger and propagates far below the injection well. At the same time, the horizontal stress increases, mostly because of stress redistribution below and above the cooling area. These two phenomena cause the rotation of the stress tensor and the appearance of a strike-slip regime above, inside, and below the cooling area. The cooling and the associated rotation of the stress regime can play a significant role in the observed long-term deepening of the microseismicity below active injection wells.

58 GEOSCIENCES↗

Self-mixing in microtubule-kinesin active fluid from nonuniform to uniform distribution of activity

Active fluids have applications in micromixing, but little is known about the mixing kinematics of systems with spatiotemporally-varying activity. To investigate, UV-activated caged ATP is used to activate controlled regions of microtubule-kinesin active fluid and the mixing process is observed with fluorescent tracers and molecular dyes. At low Péclet numbers (diffusive transport), the active-inactive interface progresses toward the inactive area in a diffusion-like manner that is described by a simple model combining diffusion with Michaelis-Menten kinetics. At high Péclet numbers (convective transport), the active-inactive interface progresses in a superdiffusion-like manner that is qualitatively captured by an active-fluid hydrodynamic model coupled to ATP transport. Results show that active fluid mixing involves complex coupling between distribution of active stress and active transport of ATP and reduces mixing time for suspended components with decreased impact of initial component distribution. This work will inform application of active fluids to promote micromixing in microfluidic devices.

59 BASIC BIOLOGICAL SCIENCES↗

Back-Stress and Its Evolution during Primary Creep in Particle Strengthened Nickel Superalloys

According to Eshelby’s theory, inelastically inhomogeneous inclusions in a metallic matrix give rise to a distribution of internal stresses. In the case of particle strengthened materials, such as nickel base superalloys, the presence and evolution of this back-stress leads to various observable effects, such as primary creep, back-flow upon loading, and memory of prior deformation. This article presents the background of the concept of back-stress and how it applies to the scenario of creep. A derivation of an evolution equation for back-stress in the context of primary creep is also presented. The results from neutron diffraction with in-situ creep experiments on directionally solidified nickel superalloys are presented in order to demonstrate the validity of the proposed equation and the corollaries derived therefrom.

36 MATERIALS SCIENCE↗

Implications of Changes in Water Stress and Precipitation Extremes for Cocoa Production in Côte D'ivoire and Ghana

ABSTRACT Climate change induces high variability in drought patterns and extreme precipitation indices in rainfed cocoa farming, impacting cocoa production. This study evaluated water stress, meteorological and agricultural drought conditions, and critical extreme precipitation indices in the world's two largest cocoa‐producing nations from 1981 to 2022. The results revealed a significant reduction in total annual precipitation (PRCPTOT), in the last three decades, with the greatest decline in the 1991–2000 and 2011–2022 periods. Ghana experienced the most significant reduction up to 15% (200 mm/year) in the last decade, attributed to a substantial decrease in wet days number (RR1) up to 25 days per year, a reduction in maximum consecutive wet days (CWD) up to 6 days per year, and an increase in maximum consecutive dry days (CDD) up to 15 days per year. Moreover, there was a notable decline in the Simple Daily Intensity Index (SDII), with reductions of up to 4 mm/day in certain areas, contributing to increased drought frequency, severity, and duration. In the most recent decade (2011–2022), particularly during the extremely dry years of 2013 and 2015, cocoa‐growing regions in Ghana (GHA) and eastern Côte d'Ivoire (CIV) experienced prolonged agricultural drought expressed by soil moisture deficit, typically extending from May to September. Additionally, large portions of central and eastern Ghana, as well as northeastern Côte d'Ivoire experienced sustained water stress, with over three consecutive months of total monthly precipitation falling below 100 mm, negatively impacting cocoa productivity. The decrease in the yield in the range of 2.5% to 37% was noted in the dry years and the following years, varying according to the country depending on the severity of the drought. Sensitivity analysis highlights cocoa yield's responsiveness to drought and water stress, particularly in specific years when water stress occurred, such as 1984,1985, 1989, 1995, 1999, 2000, and 2008. Considering the observed trends in precipitation patterns and their impact on cocoa production, it is crucial to acknowledge the inherent uncertainty of future precipitation patterns due to climate change. To address this challenge effectively, our study underscores the importance of identifying and closely monitoring regions currently facing water stress, as determined by precipitation and drought indicators. Over the analysed period (1981–2022), we have noted shifts in the distribution of water‐stressed areas, highlighting the dynamic nature of this issue. Consequently, we advocate for a targeted approach to implement cocoa supplementary irrigation in consistently water‐stressed regions.

Obahoundje, Salomon [International Water Managemen↗

The sensitivity of fracture location distribution in brittle materials

The Weibull weak-link theory allows for the computation of distribution functions for both the fracture location and the applied far-field stress. Several authors have suggested using the fracture location information from tests to infer Weibull parameters, and others have used the predictive capabilities of the theory to calculate average fracture locations for brittle bodies. By a simple set of example calculations, it is shown that the fracture location distribution function is distinctly more sensitive to perturbations in the stress state than the fracture stress distribution function is. In general, the average fracture location is more subject to stress perturbations than the average fracture stress. The results indicate that care must be exercised in applying fracture location theory.

Wetherhold, Robert C.↗

Investigation of Thermal Stress Convection in Nonisothermal Gases under Microgravity Conditions

The project has sought to ascertain the veracity of the Burnett relations, as applied to slow moving, highly nonisothermal gases, by comparison of convection and stress predictions with those generated by the DSMC method. The Burnett equations were found to provide reasonable descriptions of the pressure distribution and normal stress in stationary gases with a 1-D temperature gradient. Continuum/Burnett predictions of thermal stress convection in 2-D heated enclosures, however, are not quantitatively supported by DSMC results. For such situations, it appears that thermal creep flows, generated at the boundaries of the enclosure, will be significantly larger than the flows resulting from thermal stress in the gas.

Mackowski, Daniel W.↗